The white Apex enclosure and Swing Wall Mount combine secure iPad retention with a movable mounting arm for interactive installations. The Swing Arm provides tilt, pan and swing movement while extending from 4.5 to 10.2 inches (11.5 to 26 cm) from the wall, giving users greater freedom to position the screen. The Apex enclosure provides keyed access, exposed cameras and sensors, and cable access that allows the iPad to remain powered and connected to peripherals during use.
Key Features of Compulocks 827W209APXW
75 x 75 mm and 100 x 100 mm VESA-compatible Swing Arm
Supports up to 4.8 lb / 1.95 kg
Extends from 4.5 to 10.2 inches / 11.5 to 26 cm from the wall
Tilt, pan and swing movement
Quick keyed lock and unlock mechanism
Exposed front and rear cameras and sensors
Integrated cable management
Supports continuous charging while mounted
Allows connected peripherals to remain attached
Locking VESA plate
Security lock slot for compatible security cables
Extended Arm Reach
The mounting arm extends between 4.5 and 10.2 inches (11.5 to 26 cm) from the wall. Its two-joint construction provides additional positioning freedom for installations around corners, beneath cabinets or where available counter space is restricted.
Keyed Security
A quick keyed lock and unlock mechanism secures the iPad within the Apex enclosure while allowing authorised access when the tablet requires servicing or removal. The Swing Arm also incorporates a locking VESA plate and a security lock slot for compatible security cables.
VESA Mounting
The Swing Arm supports 75 x 75 mm and 100 x 100 mm VESA mounting configurations. The locking VESA plate connects the arm to compatible mounting hardware, while the mounting arrangement can be used on walls and other suitable flat surfaces.
Charging and Peripheral Access
Integrated cable management provides a route for the iPad charging connection through the mounting assembly, with optional through-wall routing available. The enclosure allows the tablet to remain connected to power while mounted, and peripheral cables can remain attached during operation.
Interactive Tablet Installations
The combination of a secured enclosure and movable arm suits reception areas, visitor registration points, retail counters, self-service stations, information displays and other shared environments where an iPad needs to remain accessible while held in a fixed mounting arrangement.
The white Apex enclosure and Bow wall mount provide a secure way to position a compatible iPad for interactive use on a wall. The aluminium Bow mount rotates through 130 degrees and supports both portrait and landscape orientations, with 75 x 75 mm and 100 x 100 mm VESA mounting patterns. The Apex enclosure uses a metal frame with quick keyed lock and unlock access, while openings retain access to the iPad cameras and sensors.
Key Features of Compulocks 505W209APXW
130-degree rotating and tilting mount
Portrait or landscape mounting
Quick keyed lock and unlock mechanism
Exposed front and rear cameras and sensors
Through-arm cable management
Supports 75 x 75 mm and 100 x 100 mm VESA mounting patterns
Positions the display approximately 4 inches from the wall
Secure Apex Enclosure
The Apex enclosure uses a metal frame to hold the compatible iPad securely while allowing access to key device functions. Openings around the cameras and sensors allow these features to remain available when the tablet is installed, supporting interactive applications that require camera or sensor access.
130-Degree Positioning
The Bow mount provides 130-degree movement for adjusting the tablet to different viewing and interaction angles. The display can be positioned in either portrait or landscape orientation, allowing the installation to suit different content formats and user requirements.
Wall Mounting
The Bow mount uses a four-screw mounting pattern and supports both 75 x 75 mm and 100 x 100 mm VESA mounting configurations. The display sits approximately 4 inches from the wall, providing space for comfortable interaction while maintaining a compact wall-mounted profile.
Integrated Cable Routing
Through-arm cable management provides a route for the iPad charging cable through the mount. This allows the tablet to remain connected while installed, supporting applications that require the device to stay powered during regular use.
Adjustable Hinge
Hinge tension adjustment allows the movement of the Bow mount to be set according to the installation requirements. Combined with the 130-degree movement and dual-orientation support, this provides flexible positioning for different viewing conditions.
The Reach Articulating Arm provide a flexible mounting arrangement for compatible iPad models, allowing the display to be positioned across a broad range of viewing and working angles. The articulating arm offers up to 24 inches of extension and 16 inches of lift, with tilt and pan movement for convenient screen positioning. The Apex enclosure adds keyed access, exposed cameras and sensors, and charging cable access while keeping the tablet securely held in place.
Key Features of Compulocks 660REACH209APXB
Arm extends up to 24 inches / 61 cm
Provides up to 16 inches / 40.6 cm of lift
Tilt and pan adjustment
75 x 75 mm and 100 x 100 mm VESA mounting patterns
Wall mounting available with an additional bracket
Quick keyed lock and unlock mechanism
Exposed front and rear cameras and sensors
Integrated charging cable access
Arm cable management for routing wires and cords
Articulating Arm Movement
The Reach Arm provides a broad range of movement for positioning the iPad at different heights and angles. Its articulated structure allows the display to be extended, raised, tilted and panned according to the user's viewing or interaction requirements.
Extended Reach and Lift
The arm extends up to 24 inches from its mounting position and provides up to 16 inches of lift. This range gives the tablet greater positioning flexibility across a desk or countertop, making it suitable for applications where the display needs to move closer to or farther from the user.
Apex iPad Enclosure
The Apex enclosure uses a metal frame to hold the compatible iPad while retaining access to important device functions. Openings keep the front and rear cameras and sensors available, while the keyed locking mechanism provides controlled access to the tablet.
Flexible Installation
The Reach Arm can be secured to a desk or countertop, including installation through an existing cable pass-through hole or by using a bolt-down mounting method. A separate wall bracket can also be used when a wall-mounted installation is required.
VESA Compatibility
The Reach Arm supports 75 x 75 mm and 100 x 100 mm VESA mounting patterns, providing compatibility with the Apex enclosure and suitable mounting hardware. This allows the tablet assembly to be positioned securely while retaining the movement provided by the articulating arm.
Charging Cable Access
The Apex enclosure incorporates charging cable access so the iPad can remain connected while mounted. Cable management within the Reach Arm provides a route for wires and cords as the display is repositioned.
Adjustable iPad Workstations
The combination of the movable arm and secured enclosure suits reception desks, service counters, interactive workstations, visitor registration points and other areas where an iPad needs to be positioned at different heights, distances and viewing angles.
The Apex enclosure combined with the Swing Wall Mount gives a compatible iPad a flexible, wall-mounted position that can be adjusted for different users and viewing angles. The Swing Arm extends from 4.5 to 10.2 inches from the wall and provides tilt, pan and swing movement, while the metal Apex enclosure keeps the tablet secured and leaves the cameras, sensors, buttons and inputs accessible. The mounting arrangement also supports continuous charging and connected peripherals while the iPad remains enclosed.
Key Features of Compulocks 827B209APXB
100 x 100 mm and 75 x 75 mm VESA-compatible Swing Arm
Supports up to 4.8 lb / 1.95 kg
Extends from 4.5 to 10.2 inches / 11.5 to 26 cm from the wall
Tilt, pan and swing movement
Two-joint Swing Arm construction
Quick keyed lock and unlock access
Exposed front and rear cameras and sensors
Access to iPad buttons and inputs
Integrated cable management
Allows connected peripherals to remain attached
Suitable for wall and flat-surface mounting
Lock slot for added security
Flexible Swing Movement
The Swing Arm combines tilt, pan and swing movement to give users greater control over the tablet's position. Its two-joint construction allows the iPad to be moved toward different viewing positions, making it useful for interactive installations where users approach the display from varying angles.
Adjustable Wall Reach
The arm extends from 4.5 to 10.2 inches (11.5 to 26 cm) from the wall, giving the tablet additional reach when required. This range can be particularly useful around corners, beneath cabinets or in locations where available counter space is limited.
Keyed Security
The Apex enclosure incorporates quick keyed lock and unlock access, helping keep the iPad secured during normal use while allowing authorised access when servicing or removing the tablet. The Swing Arm also incorporates a locking VESA plate and lock slot for additional security.
VESA Mounting
The Swing Arm supports 75 x 75 mm and 100 x 100 mm VESA mounting configurations. The locking VESA plate provides the connection between the arm and compatible mounting hardware, while the arm can be used for wall-mounted and other suitable flat-surface installations.
Cable Routing
Integrated cable management provides a route for the iPad charging connection through the mounting arm. Optional through-wall routing allows cables to pass through the installation surface, while the enclosure permits continuous charging and connected peripherals to remain in use.
The Apex enclosure paired with the Bow tilting wall mount provides a secure and adjustable way to position compatible iPad models on a wall. The aluminium Bow mount offers 130-degree tilting, portrait or landscape positioning, 75 x 75 mm and 100 x 100 mm VESA compatibility, and cable management through the mounting arm. The Apex enclosure features a metal frame, quick keyed lock and unlock access, and openings for the iPad cameras and sensors.
Key Features of Compulocks 505B209APXB
130-degree tilting mount
Portrait or landscape mounting
Quick keyed lock and unlock mechanism
Exposed front and rear cameras and sensors
Through-arm cable management
Hinge tension adjustment
Positions the display approximately 4 inches from the wall
Apex iPad Enclosure
The Apex enclosure uses a metal frame to hold the compatible iPad while retaining access to its key functions. Openings allow the front and rear cameras and sensors to remain available, supporting applications that require video, photography, scanning or sensor access while the tablet remains mounted.
130-Degree Tilt Adjustment
The Bow mount provides a 130-degree tilting range, allowing the screen position to be adjusted for different viewing and interaction requirements. The mount also supports portrait and landscape orientations for flexible tablet presentation.
Keyed Security
The enclosure incorporates a quick keyed lock and unlock mechanism, helping keep the iPad secured within the mounting frame while allowing authorised access when the device needs to be removed. A T-bar lock slot provides an additional security option for compatible locking hardware.
Wall Mounting
The Bow mount attaches directly to a wall using a four-screw mounting pattern and supports both 75 x 75 mm and 100 x 100 mm VESA configurations. Its low-profile arrangement positions the display approximately 4 inches from the wall while providing access for user interaction.
Interactive Display Applications
The combination of the secured Apex enclosure and adjustable Bow mount is suitable for reception desks, visitor registration points, information displays, retail environments, self-service stations and other areas where an iPad needs to remain accessible while fixed securely to a wall.
The Compulocks 827BPMIP109 combines the PowerMove iPad mount with a Swing wall mount arm to provide a secure and flexible mounting system for compatible iPad models. Cable-free charging, USB-C data and power transfer, keyed security and a lift-to-release mechanism allow the tablet to remain securely mounted while still offering convenient access when required.
Key Features of Compulocks 827BPMIP109
Compatible with iPad 10th Gen 10.9-inch 2022 A2757 and A2777
Compatible with iPad 11th Gen A16 11-inch 2025 A3354, A3355 and A3356
Cable-free charging while the iPad is mounted
USB-C interface supports data and power transfer
Keyed locking mechanism for tablet security
Lift-to-release mechanism for quick tablet removal
Integrated kickstand on the tablet side
Swing arm provides tilt, pan and swing adjustment
100 x 100 mm VESA mounting pattern
Integrated cable management with optional through-wall routing
PowerMove Mount
The PowerMove mount secures the compatible iPad while providing cable-free charging through its integrated connection system. The mount also supports USB-C data and power transfer, allowing the tablet to remain connected while positioned on the wall mount.
Secure Tablet Mounting
A keyed locking mechanism helps secure the iPad when it is installed on the mount. The lift-to-release mechanism provides a straightforward way to remove the tablet when required, while the adhesive mounting pads help hold the device securely within the PowerMove system.
Swing Wall Mount
The Swing wall mount arm provides tilt, pan and swing movement, giving users flexibility when positioning the iPad for different viewing and interaction requirements. The arm extends from the wall and supports a range of display positions while keeping the tablet secured to the mounting system.
Cable Management
Integrated cable management helps route the connection cable through the mounting arm, with optional through-wall routing available for installations where the cable needs to pass directly through the wall. This keeps the connection routed through the mounting system while the iPad remains securely positioned.
The Compulocks 505W11PAPX4W iPad Pro M4 11-inch Apex Enclosure Tilting Wall Mount provides a secure way to position a compatible 11-inch iPad Pro on a wall while retaining access to its cameras and sensors. The white Apex enclosure uses a keyed locking mechanism and aluminium construction, while the Bow wall mount allows the screen to tilt and pan for more flexible viewing.
Key Features of Compulocks 505W11PAPX4W
Compatible with iPad Pro M4 11-inch (2024)
Supports iPad Pro models A2836, A2837 and A3006
Keyed locking mechanism
75 x 75 mm and 100 x 100 mm VESA mounting support
Tilting and panning wall mount
Integrated cable management
Front and rear cameras remain exposed
Tablet sensors remain accessible
Supports portrait and landscape positioning
Wall-mountable 11-inch tablet enclosure
Secure Apex Enclosure
The Apex enclosure uses an aluminium metal frame with a keyed locking mechanism to hold the iPad Pro securely in place. Quick keyed access makes it possible to remove the tablet when required, while the enclosure keeps the front and rear cameras exposed for continued use.
Adjustable Wall Mount
The Bow mounting system provides both tilt and pan adjustment, allowing the screen position to be changed to suit different viewing locations. The mount can accommodate portrait or landscape positioning, making it suitable for interactive displays, information points, reception areas and customer-facing installations.
Flexible VESA Mounting
Support for 75 x 75 mm and 100 x 100 mm VESA mounting patterns provides flexibility when fitting the enclosure to compatible wall mounting hardware. The wall-mount arrangement also positions the tablet close to the wall while providing room for the mounting and cable connections.
Accessible Cameras and Sensors
The enclosure leaves the iPad Pro's front and rear cameras and sensors exposed, allowing these functions to remain available while the tablet is mounted. This makes the enclosure suitable for applications where camera access or sensor functionality forms part of the tablet's use.
Integrated Cable Management
Built-in cable management provides a route for the tablet's charging connection through the mounting assembly. This helps keep the power cable contained while allowing the iPad Pro to remain connected during use. The Apex enclosure also provides dedicated charging cable access.
2024 iPad Pro Compatibility
The enclosure is specified for the 11-inch iPad Pro M4 | 11" | 2024 | A2836, A2837, A3006 and the iPad Pro M5 | 11" | 2025 | A3357, A3358, A3359, covering model numbers A2836, A2837 and A3006.
The Compulocks 111BPMIP109 combines a PowerMove iPad mount with a Core stand to provide a secure and flexible way to position a compatible iPad on a counter or wall. The PowerMove mount uses cable-free charging and a click-on/off mechanism, allowing the tablet to be removed when required while the keyed locking mechanism helps keep it securely mounted during everyday use.
Key Features of Compulocks 111BPMIP109
Compatible with iPad 10th generation 10.9-inch and iPad 11th generation A16 11-inch
Cable-free charging for the compatible iPad
Click-on/off mechanism for attaching and removing the iPad
Keyed locking mechanism for tablet security
45-degree viewing angle
Suitable for counter or wall mounting
Integrated kickstand on the tablet side
Supports data and power transfer through USB-C
100 x 100 mm VESA-compatible Core stand
Flexible Mounting
The Core stand provides a 45-degree viewing angle and can be installed on a countertop or wall, giving the tablet a practical position for interactive displays, reception areas, point-of-sale applications and other fixed installations.
Cable-Free Charging
The PowerMove mount provides cable-free charging for the compatible iPad, helping keep the tablet powered while it remains mounted. The mount also supports data and power transfer through its USB-C interface.
Secure Tablet Mounting
A keyed locking mechanism helps keep the iPad secured in the mount, while the click-on/off mechanism allows the tablet to be attached or removed when needed. An integrated kickstand on the tablet side provides additional support when the device is being used away from the fixed mounting position.
Compatible iPad Models
The PowerMove mount supports the 10th-generation 10.9-inch iPad from 2022, including models A2757 and A2777, along with the 11th-generation A16 11-inch iPad from 2025, including models A3354, A3355 and A3356.
The Apex enclosure and Bow tilting wall mount provide a secure wall-mounted setup for the 13-inch iPad Air M2 and M3. The lockable aluminium enclosure keeps the tablet firmly positioned while leaving the cameras and sensors accessible, and the adjustable mount allows the screen to be tilted and panned for a more suitable viewing angle. Support for portrait and landscape positioning, cable routing and standard VESA mounting adds flexibility for interactive tablet installations.
Key Features of Compulocks 505B13APXB
Compatible with 13-inch iPad Air M2 and M3 models
Supports iPad Air 13-inch M2 models A2898, A2899 and A2900
Supports iPad Air 13-inch M3 models A3268, A3269 and A3271
Lockable Apex aluminium enclosure
Bow tilting wall mount with tilt and pan adjustment
Supports portrait and landscape orientation
Front and rear cameras and sensors remain accessible
Keyed enclosure access
Hidden cable management through the mounting arm
75 x 75 mm and 100 x 100 mm VESA mounting patterns
Positions the iPad approximately 4 inches from the wall
Lockable Apex Enclosure
The Apex enclosure uses an aluminium frame to hold the iPad Air securely and includes keyed access for controlled removal. Open areas around the enclosure keep the front and rear cameras and sensors available, while charging access allows the tablet to remain connected during wall-mounted use.
Adjustable Viewing Angle
The Bow wall mount provides tilt and pan adjustment, allowing the screen to be positioned according to the viewing requirements of the installation. The tablet can also be placed in either portrait or landscape orientation for different applications.
VESA Mounting
The mounting assembly supports 75 x 75 mm and 100 x 100 mm VESA patterns, providing compatibility with standard VESA mounting arrangements. The Bow mount holds the tablet approximately 4 inches from the wall, allowing room for its adjustable mechanism.
Integrated Cable Routing
Hidden cable management within the mounting arm provides a route for the iPad's charging connection. This keeps the cable contained around the mount while allowing the tablet to stay connected to power during normal operation.
The Compulocks 827W209IPDSW combines a white Space enclosure with a Swing Wall Mount Arm to provide secure and flexible mounting for compatible iPad models. The aluminium enclosure holds the tablet securely while retaining access to the device's cameras and sensors, while the adjustable arm allows the display to be positioned at different viewing angles.
Key Features of Compulocks 827W209IPDSW
Space enclosure for iPad 10th Gen 10.9-inch and iPad 11th Gen A16 11-inch
Quick keyed locking mechanism
Rounded edges and open corners for ventilation
Front and rear cameras and sensors remain accessible
Continuous iPad charging while mounted
Swing arm provides tilt, pan and swing adjustment
100 x 100 mm VESA mounting pattern
Concealed cable management
Includes two enclosure keys
Secure Space Enclosure
The Space enclosure uses high-grade aluminium and a keyed locking mechanism to keep the iPad securely mounted. Rounded edges and open corners provide ventilation around the tablet, while the enclosure allows access to the front and rear cameras and sensors.
Adjustable Swing Arm
The Swing Wall Mount Arm provides tilt, pan and swing movement for flexible positioning. It extends from 4.5 to 10.2 inches (11.5–26 cm) from the wall.
VESA Mounting
The Space enclosure features a 100 x 100 mm VESA mounting pattern, allowing it to connect to the included Swing Wall Mount Arm. The arm provides additional movement so the mounted tablet can be positioned horizontally or vertically according to the installation requirements.
Cable Access and Charging
The enclosure conceals the charging cable while allowing the iPad to remain connected when mounted. This permits continuous charging and the connection of peripheral cables while the tablet is secured inside the enclosure.
The Space enclosure and Bow tilting wall mount combination provides a secure way to position compatible iPads on a wall while keeping the display accessible for everyday interaction. Its white aluminium enclosure holds the tablet securely, while the adjustable wall mount allows the screen to be tilted for a more comfortable viewing position. Access to the front and rear cameras and sensors is retained, and through-arm cable management helps keep charging connections routed neatly.
Key Features of Compulocks 505W209IPDSW
Compatible with iPad 10th generation 10.9-inch and iPad 11th generation A16 11-inch
White aluminium Space enclosure with keyed locking mechanism
Bow tilting wall mount with adjustable viewing angle
Supports both portrait and landscape orientation
75 x 75 mm and 100 x 100 mm VESA mounting interfaces
Through-arm cable management for charging connections
Front and rear cameras and sensors remain accessible
Two keys included
Wall-mounted configuration suitable for tablet applications
Compatible iPad Models
This mounting kit supports the 10.9-inch iPad 10th generation from 2022, including models A2757 and A2777, along with the 11-inch iPad 11th generation featuring the A16 chip. It accommodates both Wi-Fi and Wi-Fi + Cellular versions, providing a suitable fit for interactive tablet installations.
Secure Space Enclosure
The aluminium Space enclosure surrounds the tablet while retaining access to important controls, cameras and sensors. A keyed lock helps restrict unwanted removal, with two keys supplied for convenient access when the tablet needs to be serviced or repositioned.
Adjustable Wall Mount
The Bow wall mount provides tilt adjustment so the display can be positioned to suit different viewing requirements. The mounting arrangement also supports portrait or landscape orientation, giving greater flexibility for interactive displays, information points and tablet-based applications.
VESA Compatibility
Installation is supported through 75 x 75 mm and 100 x 100 mm VESA mounting patterns, allowing the wall mount to work with a range of compatible mounting surfaces and brackets. The wall-mounted format keeps the tablet positioned securely while leaving the screen readily accessible.
Cable Management
Through-arm cable management provides a route for the tablet's charging cable through the mounting assembly. This helps keep the power connection organised while allowing the iPad to remain connected during regular use.
The Compulocks 505WUCLGVWMW Universal Tablet Cling Bow Tilting Wall Mount provides a flexible way to secure and position compatible tablets on a wall. The Cling holder uses adjustable arms and interchangeable support pads to accommodate tablets from 7.09 to 10.63 inches wide and between 0.20 and 0.37 inches thick. Its Bow mounting arm supports portrait and landscape positioning, with up to 130 degrees of tilt and pan adjustment for different viewing angles.
Key Features of Compulocks 505WUCLGVWMW
Supports tablets from approximately 7 to 13 inches
Supports tablet widths from 7.09 to 10.63 inches
Accommodates tablet thicknesses from 0.20 to 0.37 inches
Adjustable Cling arms
130-degree tilting Bow wall mount
Pan adjustment for flexible viewing positions
Portrait and landscape orientation support
Integrated security lock slot
Approximately 4-inch wall profile
Universal Tablet Holder
The Cling holder accommodates a broad selection of tablets, making it suitable for installations where different tablet models may be used. Adjustable arms grip the device while interchangeable support pads accommodate thicknesses from 0.20 to 0.37 inches, helping maintain a suitable fit across compatible tablets.
Secure Cling Mount
Tamper-resistant screws help secure the tablet within the Cling holder and make straightforward removal more difficult. The holder can accommodate tablets from approximately 7 to 13 inches, with the specific supported width range extending from 7.09 to 10.63 inches.
Adjustable Bow Mount
The Bow wall mount provides up to 130 degrees of tilt along with pan adjustment, allowing the screen to be positioned according to the installation and viewing requirements. The tablet can also be rotated between portrait and landscape orientations for different applications.
VESA Mounting Compatibility
The mounting assembly supports both 75 x 75 mm and 100 x 100 mm VESA mounting patterns, allowing the unit to be fitted with compatible VESA mounting hardware. The Bow mount positions the tablet approximately 4 inches from the wall while retaining room for screen adjustment.
Integrated Cable Routing
The Bow mount features through-arm cable management, providing a route for the tablet's charging connection through the mounting assembly. This allows the tablet to remain connected to power while mounted and helps keep the cable contained around the installation.
Wall-Mounted Tablet Applications
The combination of universal tablet support, adjustable viewing and cable routing makes this mount suitable for information displays, self-service stations, visitor check-in points, room scheduling and interactive tablet installations. Its white finish provides an alternative mounting option for locations requiring a lighter-coloured wall display.
The Compulocks 201MPMIP109 provides a secure wall-mounted setup for compatible iPad models while allowing the tablet to be removed when required. Its PowerMove mount combines cable-free charging with USB-C data and power transfer, giving the iPad a practical connection point for fixed installations in retail, reception, customer service and other public-facing environments.
Key Features of Compulocks 201MPMIP109
Compatible with iPad 10th generation 10.9-inch and iPad 11th generation A16 11-inch
Cable-free charging through integrated pogo pins
USB-C interface supports data and power transfer
Lift-to-release mechanism for quick tablet removal
Keyed locking mechanism helps secure the iPad
100 x 100 mm VESA mounting pattern
Integrated kickstand on the tablet side
T-bar security lock slot
Secure Wall Mounting
The PowerMove mount attaches to a wall bracket featuring a 100 x 100 mm VESA pattern and security slot. The keyed locking mechanism helps keep the iPad in position, while the T-bar lock slot provides an additional security option for fixed installations.
Cable-Free Charging
Integrated pogo pins provide cable-free charging when the iPad is mounted, helping keep the tablet powered during continuous use. A direct charging port is also available when the tablet is detached from the dock.
Easy Tablet Removal
The lift-to-release mechanism allows the iPad to be removed from its wall-mounted position when mobility is required. An integrated kickstand on the rear of the mount provides additional support when the tablet is being used away from the wall.
Compatible iPad Models
The PowerMove mount supports the 10th-generation 10.9-inch iPad from 2022, including models A2757 and A2777, as well as the 11th-generation A16 11-inch iPad from 2025, including models A3354, A3355 and A3356.
The white Apex enclosure and Bow tilting wall mount provide a secure way to position a 13-inch iPad Air on a wall while keeping the tablet accessible for everyday interaction. The lockable metal enclosure allows keyed access and leaves the front and rear cameras and sensors available. The adjustable wall mount supports tilting, while VESA compatibility, portrait or landscape positioning and through-arm cable management give flexibility for different tablet installations.
Key Features of Compulocks 505W13APXW
Lockable high-grade aluminium Apex enclosure
Bow tilting wall mount with up to 130 degrees of tilt
Supports portrait and landscape orientation
Front and rear cameras and sensors remain accessible
Quick keyed access with two enclosure keys
Through-arm cable management
75 x 75 mm and 100 x 100 mm VESA mounting patterns
Positions the iPad approximately 4 inches from the wall
13-Inch iPad Air Compatibility
This wall mounting kit supports the 13-inch iPad Air M2 from 2024 and M3 from 2025, with current Compulocks listings also extending compatibility to the 13-inch iPad Air M4 from 2026. The M2 models include A2898, A2899 and A2900, while listed M3 models include A3269 and A3271.
Apex Security Enclosure
The Apex enclosure uses a high-grade aluminium frame to hold the iPad Air securely and provides keyed access for removal when required. Cutouts retain access to the front and rear cameras and sensors, while charging access allows the tablet to remain connected during wall-mounted operation.
Tilting Wall Mount
The Bow wall mount provides up to 130 degrees of tilt for adjusting the tablet's viewing angle. The mounting arrangement also supports portrait or landscape positioning, making it suitable for interactive displays, information points and other wall-mounted tablet applications.
VESA Mounting
The enclosure and wall mount support 75 x 75 mm and 100 x 100 mm VESA mounting patterns. The Bow mount places the tablet approximately 4 inches from the wall, providing space for the adjustable mounting mechanism while keeping the display within comfortable reach.
Cable Management
Through-arm cable management provides a route for the iPad charging connection through the mounting assembly. Hidden cable routing helps keep the connection contained around the mount while the tablet remains powered during use.
White Finish and Installation
The white finish provides a neutral appearance for wall-mounted tablet installations in reception areas, customer-facing spaces, information points and interactive displays. The package combines the Apex locking enclosure with the Bow tilting wall mount and includes two enclosure keys.
The Compulocks 111BVHBMM01H01 is a universal magnetic tablet mounting bundle combining the Core 45-degree counter stand or wall mount with a PlusHub and Magnetix mounting system. It provides a fixed viewing position with flexible countertop or wall installation, while the integrated six-port hub adds connectivity for compatible USB-C tablets and peripherals.
Key Features of Compulocks 111BVHBMM01H01
Fixed 45-degree viewing angle
Suitable for countertop or wall mounting
Supports landscape and portrait orientation
Six-port USB-C PlusHub
USB-C Power Delivery (USB-C PD)
USB-C data port
HDMI port
2 x USB-A ports
RJ45 Ethernet port
USB-C interface supports data and power transfer
Ventilation holes for temperature regulation
Security lock functionality
Universal Magnetic Mounting
The Magnetix mounting system provides a universal attachment method for compatible tablets and VESA-mounted configurations. The magnetic mounting arrangement allows the tablet to be positioned on the Core stand while retaining a fixed and accessible installation.
Fixed 45-Degree Viewing Position
The Core stand holds the mounted tablet at a fixed 45-degree angle, providing a consistent viewing position for customer-facing displays, interactive applications and information points.
Countertop or Wall Installation
The Core stand can be mounted on a flat countertop or wall, giving the tablet a fixed position in locations such as reception areas, retail counters, service desks and other customer-facing environments.
Six-Port PlusHub
The integrated PlusHub provides six connectivity options: USB-C Power Delivery, USB-C, HDMI, two USB-A ports and RJ45 Ethernet. The hub allows data and power transfer through its USB-C interface and can connect compatible tablets to peripherals such as displays, printers, scanners and network connections.
Connectivity and Cable Management
The PlusHub incorporates ventilation holes for temperature regulation and includes a retractable 1-metre cable with a right-angle USB-C connector. The hub uses a 100 x 100 mm VESA mounting interface and includes security features to help protect the unit against theft or tampering.
Powder-Coated Metal Construction
The Core stand and PlusHub use powder-coated metal construction, providing a suitable mounting structure for fixed tablet installations. The setup supports both landscape and portrait tablet positioning and can be incorporated into countertop or wall-mounted configurations.
The Compulocks 505BVHBMM01 Universal Tablet Magnetic Bow Tilting Wall Mount combines a magnetic tablet attachment with an adjustable wall mounting arm for flexible positioning and easy tablet interaction. It supports tablets up to 13 inches and 5 lb, with a magnetic plate that allows the device to be lifted from the mount for handheld use and returned to its wall position when required. The Bow arm provides tilt and pan adjustment, while through-arm cable management and support for portrait or landscape orientation add flexibility for different mounting environments.
Key Features of Compulocks 505BVHBMM01
Supports tablets up to 13 inches
Maximum load capacity of 5 lb / 2.27 kg
Magnetic attachment for quick tablet removal and docking
130-degree tilt adjustment
Pan adjustment for flexible viewing angles
Supports portrait and landscape orientations
Through-arm cable management
Suitable for display and handheld tablet use
Magnetic Tablet Attachment
The magnetic mounting system provides a convenient connection between the tablet and wall mount. The tablet can be lifted away from its magnetic base when handheld access is needed and placed back onto the mount afterwards, supporting both fixed and mobile interaction.
Adjustable Viewing Position
The Bow arm provides up to 130 degrees of tilt together with pan adjustment, allowing the tablet to be positioned for different users and viewing directions. This movement can be useful for interactive displays, information points and other wall-mounted tablet applications.
Universal Tablet Compatibility
The magnetic tablet holder uses an adhesive mounting plate and is suitable for tablets from different manufacturers. Devices up to 13 inches and 5 lb can be accommodated, making the mount suitable for a variety of tablet-based installations.
VESA Wall Mounting
The Bow wall mount supports 75 x 75 mm and 100 x 100 mm VESA mounting patterns. The mounting arm positions the tablet close to the wall while providing access to the tilt mechanism and mounting points.
Cable Management
Through-arm cable management provides a route for the tablet cable through the mounting assembly. This helps keep the charging cable positioned around the mount instead of leaving excess cable hanging beside the tablet.
Portrait and Landscape Orientation
The magnetic connection allows the tablet to be used in portrait or landscape orientation, giving users flexibility when displaying different types of content. The combination of rotation, tilt and pan adjustment allows the viewing position to be changed according to the application.
The white Apex enclosure with Bow tilting wall mount provides a secure and adjustable way to position compatible Samsung Galaxy Tab models on a wall. The Bow mount offers a 130-degree tilt range and supports portrait or landscape positioning, while its VESA mounting patterns provide compatibility with suitable mounting configurations.
Key Features of Compulocks 505W11GAPX9W
75 x 75 mm and 100 x 100 mm VESA mounting patterns
130-degree tilting mount
Portrait or landscape mounting
Positions the tablet approximately 4 inches from the wall
Quick keyed lock and unlock mechanism
Exposed front and rear cameras and sensors
Charging cable access
Through-arm cable management
Hinge tension adjustment
Integrated lock slot
Galaxy Tab Apex Enclosure
The Apex enclosure uses a metal frame to hold the compatible Galaxy Tab while retaining access to important device functions. Openings around the front and rear cameras and sensors allow these features to remain available, while the keyed locking mechanism helps keep the tablet secured during shared use.
130-Degree Tilt
The Bow mount provides a 130-degree tilting range for adjusting the tablet to different viewing and interaction angles. Hinge tension adjustment allows the movement of the mount to be controlled according to the installation requirements.
VESA Mounting Support
The mounting assembly supports 75 x 75 mm and 100 x 100 mm VESA patterns, providing a standard connection between the Bow mount and compatible mounting hardware. The display can be positioned in either portrait or landscape orientation to suit different tablet applications.
Secure Keyed Access
The Apex enclosure incorporates a quick keyed lock and unlock mechanism, allowing the tablet to remain secured while providing access when removal or servicing is required. Two enclosure keys are supplied with the mounting bundle.
Camera and Sensor Access
Cut-outs in the enclosure leave the Galaxy Tab's front and rear cameras and sensors accessible. This allows applications that rely on video, photography or sensor functions to continue operating while the tablet remains mounted.
Concealed Cable Management
The Bow mount provides cable management through the arm, while the Apex enclosure includes charging cable access. This allows the tablet to remain connected to power while installed and keeps the charging connection routed through the mounting assembly.
Wall-Mounted Tablet Applications
The enclosure and tilting mount combination is suitable for reception areas, visitor registration points, information displays, retail environments, self-service stations and other locations where a Galaxy Tab needs to remain accessible while secured to a wall.
The Compulocks 827B13APXB combines an Apex secured enclosure with a Swing Wall Mount Arm for the 13-inch iPad Air M2 and M3. The black enclosure secures the tablet while keeping the front and rear cameras and sensors accessible, while the Swing arm provides flexible positioning with tilt, pan and swing adjustment for different viewing angles.
Key Features of Compulocks 827B13APXB
Apex secured enclosure for 13-inch iPad Air M2 and M3
Metal enclosure construction
Quick lock and unlock keyed mechanism
Front and rear cameras and sensors remain exposed
100 x 100 mm VESA mounting pattern
Swing arm extends from 4.5 to 10.2 inches (11.5-26 cm) from the wall
Tilt, pan and swing adjustment
Compatible with Compulocks VESA stands and mounts
Integrated cable management for charging
Secure Apex Enclosure
The Apex enclosure uses a metal frame with a quick keyed locking mechanism to secure the iPad Air during use. The enclosure keeps the tablet firmly held while leaving the front and rear cameras and sensors exposed for continued access to these functions.
Adjustable Swing Arm
The Swing Wall Mount Arm provides tilt, pan and swing movement for flexible tablet positioning. It extends from 4.5 to 10.2 inches (11.5-26 cm) from the wall, allowing the mounted display to be positioned at different distances and viewing angles.
Cable Management
The mounting system incorporates cable management to help route the charging connection while the iPad remains secured. This helps keep the cable positioned within the mounting arrangement during use.
iPad Air Compatibility
The 13-inch Apex enclosure is specified for the iPad Air M2 13-inch 2024 models A2898, A2899 and A2900, and the iPad Air M3 13-inch 2025 models A3268, A3269 and A3271. Compulocks currently also lists the enclosure as compatible with the iPad Air M4 13-inch models A3462, A3464 and A3461.
The Compulocks TCDP0180GAPXB combines an Apex metal enclosure with an 8-inch Rise stand to provide a practical counter-mounted setup for Samsung Galaxy Tab Active3 and Active5 tablets. Its tilting mount head allows the viewing angle to be adjusted, while the enclosure keeps the tablet securely positioned for interactive displays, information points, check-in areas and other public-facing applications.
Key Features of Compulocks TCDP0180GAPXB
Compatible with Samsung Galaxy Tab Active 3 | 8.0" | 2020 | SM-T570, SM-T575, SM-T577 and Galaxy Tab Active 5 | 8.0" | 2024 | SM-X306B
8-inch / 20 cm Rise counter stand
Tilting mount head for adjustable viewing angles
Key-lock access with two keys included
Front and rear cameras and sensors remain accessible
Integrated cable management helps route the charging cable through the stand
75 x 75 mm and 100 x 100 mm panel mounting interfaces
Adjustable Viewing Position
The tilting mount head makes it possible to position the tablet at a more suitable angle for users standing or seated nearby. This flexibility makes the stand useful for touchscreen information points, customer-facing displays and interactive tablet stations where visibility is important.
Tablet Access and Security
The Apex enclosure holds the compatible tablet in place while providing keyed access for installation and removal. The front and rear cameras and tablet sensors remain exposed, allowing the device to retain its core functions when positioned within the stand.
Cable Management
Charging cable routing is incorporated into the stand, helping keep the power connection directed through the mounting structure rather than hanging loosely around the tablet. This makes the setup suitable for fixed counter installations where controlled cable routing is required.
Galaxy Tab Active Compatibility
The enclosure supports the 8-inch Samsung Galaxy Tab Active3 models SM-T570, SM-T575 and SM-T577, along with the Galaxy Tab Active5 model SM-X306B. The combination of the Apex enclosure and 8-inch Rise stand provides a dedicated mounting arrangement for these rugged Samsung tablets.
Bring flexibility to your business and checkout process with this unique tablet display and security solution. Magnetix is an all-in-one universal solution that works with all tablets and iPads brands and sizes, and enables you to display, secure, and hold the tablet by hand.
Thanks to a unique customer-oriented design, the Magnetix enables to lift and hold the tablet, while it is secured to its base with a cable-lock. This provides a comfortable and elegant way for businesses to easily interact with their customer, and enable them to read and sign papers, register, and perform many other self-services without the concern of stealth attempts.
The Magnetix Wall Mount kit consists of a 100mm VESA magnetic plate that offers an easy way to lift the tablet and dock it back to place, and a cable lock slot. The included cable-lock provides the necessary security, and the Wall Mount acts as an elegant and efficient way to display the tablet. The kit also includes an adhesive plate that is fixed on any tablet or iPad and attaches to the Magnets.
This extra mobility of the tablet enhances ADA (Americans with Disabilities Act) compliance, as it enables anyone to lift the tablet and hold it by hand or change its viewing angle.
Kiosk VESA Mount Security Stand - 45 degree Counter / Wall Mount Bracket
Maclocks Kiosk Stand is a basic 45 degree counter top or wall mounting base making it a good display solution for most environments.
Universal Invisible Tablet Wall Mount - Black
The Invisible Tablet Mount is a game-changing universal plate that enables you to mount any device of any size to the wall. It is a revolutionary Tablet Mount that elevates any work environment across industries.
With a 100 x 100 VESA pattern and powerful VHB sticker pads, it allows you to secure any device, without fear of it falling or being stolen. The functionality of the tablet stand makes it a highly valuable tool, because of the added keyboard, in many working environments and front-facing customer services including hotels, restaurants, schools and colleges, trade shows, and hospitals.
Key Features:
Compatible to any iPad, Galaxy Tab, Microsoft Surface and other tablets
Industrial streght adhesive
Wire and Cable Management
Simple, Slim, & Secure Mounting
SMP01B IT mount universal plate - Compatibility: Universal (Adhesive)
Experience the ultimate versatility and durability with the Core stand and Cling Universal VESA Mount, designed to accommodate all iPad models and tablets with 7" to 13" screen sizes, on both portrait or landscape orientation. This bundle offers a one-bracket-fits-all solution, securely holding a wide range of tablet sizes. Paired with the Core stand, this solution offers extra durability, style and different mounting options – on wall or counter.
Tablet Rugged Cases Locking Stand
Compulocks' Universal Locking Rugged Case Holder with the swinging counter or wall mount is perfect for the mobile user and workforce. The Rugged Case Holder allows you to double your tablet protection in harsh environments, such as in logistics, warehouses, factories, work vehicles, and other heavy-duty uses. An adjustable cradle allows you to use different tablet sizes and brands, even with their rugged cases.
A main feature of the Rugged Case Mount is that it allows for a quick lock and release of the tablet while remaining in the case. Our new universal solution is vital to the integration of tablet use in the workspace and on the go, keeping the device secure and functional.
Key Features:
Mounts to wall or counter-top
Quick-release and lock system
Portrait or Landscape mode
Fits with most rugged case brands
Adjustable to fit both mini and full-size tablets
Screen Tilt and Pan
Screen rotation to Portrait and Landscape
The Universal Rugged Case Holder fits all major tablets with rugged cases (Samsung, Zebra, Panasonic, etc.) and almost all regular tablets (iPad, Galaxy Tabs, Surface) with all major case brands (Otterbox, etc.).
Compatibility Measurements:
Minimum Height: 4.33in (109.98mm)
Maximum Height: 7.43in (188.72mm)
Minimum Length: 5.20in (132.08mm)
Maximum Length: 12.30 (312.42mm)
Max Case Thickness: 3/4" (19mm)
Rugged Case Holder Includes:
Secure Rugged Case Mount
Setup Hardware
Set of Keys
Wall Mounting Bracket for Compulocks Reach Articulating Arm
VESA Wall Mount Bracket - Fixed Cable Management Mount
Maclocks VESA Wall Mount Bracket allows you to simply fix all enclosures to a wall or flat surface.
Universal IT Mount VESA
This VESA plate can mount on any of our products and allow safe secure mounting of any product – both a tablet and a laptop.
The IT Mount is a game-changing universal plate that enables you to mount any device – laptop, tablet, and iPad of any size onto any surface. It is designed to securely deploy devices in multiple configurations - on a floor/podium stand, counter stand, or on a wall arm. It is a revolutionary laptop stand that elevates any work environment across industries.
With a 100*100 VESA pattern and powerful VHB sticker pads, it allows you to secure any device, without fear of it falling or being stolen.
The IT-mount can be repurposed and used again on other displays, using a new set of stickers pads, creating an eco-system across our wide range of VESA compatible arms, mounts, stands, and mobile solutions.
The functionality of the laptop with keyboard makes it a highly valuable tool in many working environments and front-facing customer services including hotels, restaurants, schools and colleges, tradeshows, and hospitals.
The Cling 2.0 VESA Wall Mount is designed to work with all iPad models with just one device! This updated version is compatible with a variety of tablet models and sizes making it a near universal tablet security solution.
Securing your tablet is a re-designed bracket clamp and VESA wall mount base. The most notable update is to the 100mm x 100mm VESA wall mount now includes cable management and hidden screw holes.
The Cling 2.0 bracket can still rotate between portrait and landscape mode and setup is quick and easy.
Mount any device - laptop, tablet, or iPad of any size - onto any surface with ease. Whether it's on a floor/podium stand, counter stand, or a wall arm, the IT Mount securely holds devices in multiple configurations, enhancing work environments across industries. Paired with the durable Core Stand, this robust solution offers a sleek and sturdy platform for your devices. Elevate your workspace with unmatched versatility, as the IT Mount empowers you to work seamlessly across various setups.
Mount any device - laptop, tablet, or iPad of any size - onto any surface with ease. Whether it's on a floor/podium stand, counter stand, or a wall arm, the IT Mount securely holds devices in multiple configurations, enhancing work environments across industries. Paired with the durable Core Stand, this robust solution offers a sleek and sturdy platform for your devices. Elevate your workspace with unmatched versatility, as the IT Mount empowers you to work seamlessly across various setups.
Experience the ultimate convenience and flexibility with our Core Stand Magnetix Mount Bundle. This remarkable bundle features a universal Magnetic Mount that allows for easy snap-on and snap-off functionality, offering secure mounting in both landscape and portrait orientations. With its keyed lock for maximum security, this bundle provides a seamless and versatile solution for displaying your device in any setting. Its magnetic design allows for quick and hassle-free attachment and detachment, ensuring a smooth user experience, while the Core Display offers a powder coated steel display platform to secure and display your device
The Core stand with the Magnetix Mount offers unparalleled versatility. Whether you're showcasing digital signage, interactive presentations, or important information, this bundle provides the flexibility to present your content in the most engaging and impactful way.
Magnetic Glass Mount - Magnetix with Dual Cable Lock
Glass Mount Bracket with Security Slot with Magnetix Mount (Universal - Adhesive)
The Magnetix Glass Mount is a new solution for offices and conference suites, hotels, restaurants, etc.
Key Features:
Comprising Compulocks' innovative adhesive Hive system and 100x100 VESA wall bracket.
Securely displays any iPad or tablet by combining with our dedicated in-hand/on-stand Magnetix system
Simple to install and can be repurposed using a dedicated tool (supplied separately)
Powerful VHB adhesive pads to fix to glass and other smooth surfaces
Enhance ADA compliance
Easily switch between portrait and landscape modes
Secured and easy to install
Suitable for display and hand-held
The Magnetix Glass Mount includes:
Adhesive Hive system
Wall mount bracket
Magnetix mount (2 parts)
Dual cable lock
Experience the ultimate versatility and durability with the Core stand and Cling Universal VESA Mount, designed to accommodate all iPad models and tablets with 7" to 13" screen sizes, on both portrait or landscape orientation. This bundle offers a one-bracket-fits-all solution, securely holding a wide range of tablet sizes. Paired with the Core stand, this solution offers extra durability, style and different mounting options – on wall or counter.
Universal Glass Mount - Cling
Glass Mount Bracket with Security Slot
The Universal Glass Mount is a new solution for offices and conference suites, hotels, restaurants, etc.
Key Features:
Comprising Compulocks' innovative adhesive Hive system and 100x100 VESA wall bracket
Simple to install and can be repurposed using a dedicated tool (supplied separately)
Powerful VHB adhesive pads to fix to glass and other smooth surfaces
Compatible With Tablets 7" - 13"
Rotates Between Orientation Modes
Tamper Proof Design
Secure Cable Management
The Universal Glass Mount includes:
Adhesive Hive system
Wall mount bracket
Cling bracket
Installation kit
Universal IT Mount Swing Wall Mount - IT Mount Swing Arm
The IT Mount is a game-changing universal plate that enables you to mount any device - laptop, tablet, and iPad of any size onto any surface. It is designed to securely deploy devices in multiple configurations - on a floor/podium stand, counter stand, or on a wall arm. It is a revolutionary laptop stand that elevates any work environment across industries.
With the 100 x 100 VESA pattern and powerful VHB sticker pads, it allows you to secure any device, without fear of it falling or being stolen.
Key Features:
Tilt, Pan, and Swing for Multiple Display Angles
Industrial Strength Adhesive
Compatible to any Laptop with min. 8" x 5" flat fixing area
The IT-mount can be repurposed and used again on other displays, using a new set of stickers pads, creating an eco-system across our wide range of VESA compatible arms, mounts, stands, and mobile solutions.
The functionality of the laptop with keyboard makes it a highly valuable tool in many working environments and front-facing customer services including hotels, restaurants, schools and colleges, tradeshows, and hospitals.
Our Swing Arm stand can be mounted on any flat surface, counter-top or to a wall for use as a secure interactive display or kiosk. It is our most versatile mount allowing you to have a horizontal or vertical swing with screen tilt. The arm extends out to 9.97 inches off the wall and with its two joints, it is great for corners, under cabinets or when counter space is limited.
Universal IT Mount and Swing Arm Wall Mount Includes:
827B Swing wall mount arm - Black 100mm x 100mm VESA Compatible Mount
SMP01B IT mount universal plate - Black Universal (Adhesive)
Universal IT Mount Articulating Arm Mount - IT Mount Reach Arm - Silver
The IT Mount is a game-changing universal plate that enables you to mount any device - laptop, tablet, and iPad of any size onto any surface. It is designed to securely deploy devices in multiple configurations - on a floor/podium stand, counter stand, or on a wall arm. It is a revolutionary laptop stand that elevates any work environment across industries.
With a 100*100 VESA pattern and powerful VHB sticker pads, it allows you to secure any device, without fear of it falling or being stolen.
The IT-mount can be repurposed and used again on other displays, using a new set of stickers pads, creating an eco-system across our wide range of VESA compatible arms, mounts, stands, and mobile solutions.
Key Features:
Tilt, Pan, and Swing Articulating Arm
Quick Slide On / Off Display Mount
Arm Extends Out Up To 23.2" (59cm)
Wire and Cable Management
The Reach is an articulated arm desk mounted stand with cable management. It has a wide range of motion including tilt, swing and pan with tightening bolts to secure the angle.
As well as mounting with clamp, the Reach Arm can be fixed onto a table by bolting or using the existing wire pass-through hole.
660REACHSMP01B Includes:
Reach Arm - Silver
IT mount universal plate - Black
For wall mounting you will need to additionally purchase the REACH Articulating Arm Wall Bracket - REACHWLLBRKT
Universal Tablet Articulating Arm - Cling Reach
Reach Articulating Monitor Arm Mount with Cling Vesa Tablet Mounting Bracket
Allow your workspace to “Reach new heights” with the Cling Reach Articulating desk mount. Tilt, swivel, extend and retract your tablet with a smooth gliding motion that can be easily adjusted to your liking. Setting up the Reach Arm is quick and easy with a no-screw tightening clamp.
First fasten the base to the surface edge, then connect the arms to the base. Before you secure your tablet in the Cling mount, screw on the VESA Click-on plate. Once the Cling and Reach arm are set up, you can lock in your tablet. The Cling 2.0 bracket can still rotate between portrait and landscape mode and setup is quick and easy.
Key Features:
Compatible With Tablets 7" - 13"
Rotates Between Orientation Modes
Tilt, Pan, and Swing Articulating Arm
Quick Slide On / Off Display Mount
Tamper-Proof Screw Lock Kit
Arm Extends Out Up To 23.2" (59cm)
Wire and Cable Management
As well as mounting with clamp, Reach Arm can be fixed onto a table by bolting or using the existing wire pass-through hole.
Cling fits all iPads, Samsung Galaxy Tab A and S models, and Microsoft Surface Pro and Go tablets.
Cling is also compatible with:
Amazon Fire 8 and Amazon Fire 10 (HD) tablets and other Amazon Fire models
Acer tablets
Asus tablets
Huawei tablets
Lenovo tablets
Xiaomi Pads
and other tablet brands and models
Compatibility: Tablets Universal - 7" -to 13" approx:
Max Length/Width: 8.50” / 216mm
Min Length/Width: 6.50” / 165mm
Max Thickness: 0.36" /9.3mm
Cling Reach Articulating Arm Includes:
Cling Universal Mount - Cling Vesa - Black
Articulating Arm Desk Mount - Reach Arm - Silver
Installation Hardware
For wall mounting you will need to additionally purchase the REACH Articulating Arm Wall Bracket - REACHWLLBRKT
The Bow Tilting Wall Mount provides a flexible way to position a VESA-compatible display on a wall or other flat surface. Its 130-degree tilt range allows the screen to be adjusted for different viewing positions, while the 75 x 75 mm and 100 x 100 mm VESA patterns support a broad range of compatible displays and enclosures. The aluminium mount also incorporates cable routing, hinge tension adjustment and a lock slot for installations where controlled access and flexible positioning are important.
Key Features of Compulocks 505B
75 x 75 mm and 100 x 100 mm VESA compatibility
Supports displays up to 27 inches
Maximum load of 10 lb / 4.5 kg
130-degree tilt range
Portrait or landscape mounting
Hinge tension adjustment
Lock slot for compatible security hardware
Through-arm cable management
Four cable exit options from the base
130-Degree Tilt Adjustment
The Bow mount provides a 130-degree range of tilt, allowing the display to be positioned according to the viewing angle required at the installation point. Hinge tension can also be adjusted to help control the movement and positioning of the mounted screen.
VESA Compatibility
The mount supports standard 75 x 75 mm and 100 x 100 mm VESA patterns, making it suitable for compatible displays and Compulocks enclosures. It supports screens up to 27 inches with a maximum load of 10 lb (4.5 kg).
Flexible Display Orientation
The Bow mount can hold a compatible display in either portrait or landscape orientation. This provides greater flexibility when positioning interactive screens, information displays or tablet enclosures according to the content and installation requirements.
Aluminium Mount Construction
The mount uses aluminium construction and a four-screw mounting pattern for attachment to a suitable flat surface. When paired with an enclosure, the display sits approximately 4 inches from the wall, providing space for viewing and user interaction.
Integrated Cable Routing
The Bow incorporates a cable passage through the arm and provides four cable exit options at the base. An additional centre-base routing option allows the charging cable to pass through the mounting plate, helping keep the connection routed through the mounting assembly.
Security Features
An integrated lock slot provides a connection point for compatible security hardware such as a cable lock. The mount also provides controlled hinge movement through its tension adjustment, while the four-screw mounting pattern secures the Bow to the installation surface.
The Bow Tilting Wall Mount in white provides a flexible mounting point for VESA-compatible displays and tablet enclosures on walls and other suitable flat surfaces. Its 130-degree tilt movement allows the screen to be positioned for different viewing requirements, while support for 75 x 75 mm and 100 x 100 mm VESA patterns accommodates compatible mounting configurations.
Key Features of Compulocks 505W
75 x 75 mm and 100 x 100 mm VESA compatibility
Supports displays up to 27 inches
Maximum load of 10 lb / 4.5 kg
130-degree tilting range
Portrait or landscape mounting
Hinge tension adjustment
Lock slot for compatible security hardware
Through-arm cable management
Four cable exit options from the base
Suitable for wall and flat-surface installation
Adjustable Tilt
The mount provides 130 degrees of tilt movement, allowing a compatible display to be positioned according to the viewing angle required at the installation location. Hinge tension can be adjusted with the supplied wrench to control the movement of the mount.
VESA Display Support
The Bow supports both 75 x 75 mm and 100 x 100 mm VESA mounting patterns. It can accommodate displays up to 27 inches with a maximum supported load of 10 lb (4.5 kg), making it suitable for compatible monitors, tablet enclosures and other VESA-mounted equipment.
Portrait and Landscape Positioning
A compatible display can be installed in either portrait or landscape orientation. This gives installers flexibility when setting up interactive screens, information displays or tablet enclosures for different content formats and user positions.
Aluminium Construction
The Bow uses aluminium construction with a four-screw mounting pattern for attachment to a suitable flat surface. When used with a compatible enclosure, the display is positioned approximately 4 inches from the wall, providing room for viewing and interaction.
Through-Arm Cable Management
A concealed cable passage runs through the mounting arm, with four cable exit options available from the base. The mount also provides an option for routing a charging cable through the centre of the base plate, allowing connections to pass through the mounting assembly.
Lock Slot
An integrated lock slot provides a connection point for compatible security hardware. This feature can be used with suitable cable-lock accessories to provide an additional security measure for mounted displays and tablet enclosures.
Wall and Flat-Surface Mounting
The Bow can be secured directly to a suitable wall or flat surface using its mounting plate and supplied hardware. Its combination of VESA compatibility, adjustable tilt, cable routing and dual-orientation support makes it suitable for interactive displays, tablet enclosures, information points and other mounted screen applications.
The Galaxy Tab Apex enclosure paired with the Bow wall mount provides a secure way to position an 11-inch Samsung tablet on a wall while retaining access to key device functions. The aluminium Bow mount provides tilt and pan movement, while the Apex enclosure uses a metal frame with keyed access and openings for the tablet cameras and sensors. Cable routing through the mounting assembly allows the tablet to remain connected to power during use.
Key Features of Compulocks 505B11GAPX9B
75 x 75 mm and 100 x 100 mm VESA mounting patterns
Supports an 11-inch tablet
Tilt and pan adjustment
Approximately 4 inches from the wall
Portrait or landscape mounting
Quick keyed lock and unlock mechanism
Exposed front and rear cameras and sensors
Charging cable access
Hinge tension adjustment
Integrated lock slot
Apex Galaxy Tab Enclosure
The Apex enclosure uses a metal frame to hold the compatible Galaxy Tab while keeping important tablet functions accessible. Openings around the front and rear cameras and sensors allow these features to remain available when the tablet is secured inside the enclosure.
Tilt and Pan Movement
The Bow mount allows the tablet display to be tilted and panned to suit different viewing positions. Hinge tension adjustment provides control over the movement of the mounting assembly, allowing the screen position to be set according to the installation requirements.
VESA Mounting
The Bow mount supports 75 x 75 mm and 100 x 100 mm VESA mounting patterns. This provides a standard connection between the mounting assembly and compatible hardware while keeping the tablet securely positioned on the wall.
Keyed Tablet Access
A quick keyed lock and unlock mechanism helps keep the Galaxy Tab secured within the Apex enclosure while permitting authorised access when the tablet needs to be removed or serviced. Two enclosure keys are included with the mounting kit.
Integrated Cable Routing
Cable management within the Bow mount provides a route for the tablet charging connection. The Apex enclosure also provides charging cable access, allowing the Galaxy Tab to remain connected to power while secured in its wall-mounted position.
Portrait or Landscape Positioning
The tablet can be mounted in portrait or landscape orientation, allowing the display position to suit different applications and content formats. The combination of orientation support and adjustable movement provides flexibility for interactive tablet installations.
The Apex enclosure wall mount provides a secure fixed mounting arrangement for compatible Samsung Galaxy Tab Active tablets. The metal enclosure holds the tablet in position while retaining access to key device functions, and its wall-mount format suits locations where the tablet needs to remain available for interaction without being left loose on a counter or desk. The enclosure also provides access for the tablet's cameras and charging connection during mounted use.
Key Features of Compulocks 80GAPXB
Metal Apex enclosure construction
Wall-mount installation
Quick keyed lock and unlock access
Exposed front and rear cameras and sensors
Access to tablet buttons and inputs
Charging cable access while mounted
Integrated cable management
Secure Tablet Enclosure
The Apex enclosure holds the compatible Galaxy Tab Active tablet within a metal frame and provides keyed lock and unlock access. This keeps the tablet secured in its mounting position while allowing authorised users to access the device when required.
Galaxy Tab Active Compatibility
The enclosure is compatible with the Galaxy Tab Active3 8-inch models SM-T570, SM-T575 and SM-T577, as well as the Galaxy Tab Active5 8-inch model SM-X306B. This provides support for the specified Active-series tablets across their respective generations.
Camera and Sensor Access
Open areas within the enclosure allow access to the tablet's front and rear cameras and sensors. This lets the mounted Galaxy Tab continue to support applications that require camera or sensor functions during everyday operation.
Keyed Access
The enclosure incorporates a quick keyed lock and unlock mechanism, providing controlled access to the tablet. The locking arrangement helps keep the device secured while still allowing it to be removed when maintenance or replacement is required.
Charging Access
The enclosure provides access for the tablet charging connection while mounted. This allows the Galaxy Tab Active to remain connected to power during use rather than requiring removal from the enclosure for charging.
Wall Installation
The wall-mount format keeps the Galaxy Tab Active in a fixed and accessible position. It can be used for interactive tablet applications in locations such as reception areas, information points, service counters and other spaces where a mounted tablet is required.
The Apex enclosure paired with the Bow tilting wall mount provides a secure and adjustable way to position compatible Samsung Galaxy Tab Active tablets on a wall. The Bow mount allows the display to tilt and pan while keeping the tablet approximately 4 inches from the wall, and the enclosure provides keyed access with openings for the front and rear cameras and sensors. Through-arm cable management also allows the charging connection to be routed through the mounting assembly during use.
Key Features of Compulocks 505B80GAPXB
Compatible with Samsung Galaxy Tab Active3 8-inch models SM-T570, SM-T575 and SM-T577
Compatible with Samsung Galaxy Tab Active5 8-inch model SM-X306B
130-degree tilting mount
Tilt and pan adjustment
Portrait or landscape mounting
Positions the tablet approximately 4 inches from the wall
Aluminium Bow mount construction
Quick keyed lock and unlock mechanism
Exposed front and rear cameras and sensors
Through-arm cable management
Charging cable access
Integrated lock slot
Apex Tablet Enclosure
The Apex enclosure uses a metal frame to hold the compatible Galaxy Tab Active tablet securely while retaining access to important device functions. Open areas around the front and rear cameras and sensors allow these features to remain available when the tablet is enclosed.
130-Degree Tilt Movement
The Bow mount provides a 130-degree tilting range and also permits pan adjustment, allowing the tablet to be positioned for different viewing and interaction angles. Hinge tension adjustment provides additional control over the movement of the mounting assembly.
VESA Mounting Patterns
The Bow mount supports 75 x 75 mm and 100 x 100 mm VESA mounting patterns. This provides a standard mounting connection while allowing the enclosed tablet to be positioned securely on a suitable wall surface.
Keyed Security
A quick keyed lock and unlock mechanism helps secure the Galaxy Tab Active within the Apex enclosure while allowing authorised access when the tablet needs to be removed. The bundle includes two enclosure keys for access to the locking mechanism.
Cable Management
The Bow mount provides cable management through the arm, creating a route for the tablet charging connection. The Apex enclosure also provides charging cable access, allowing the Galaxy Tab Active to remain connected while secured in its wall-mounted position.
Portrait or Landscape Installation
The mounting arrangement supports both portrait and landscape tablet positioning. This allows the screen orientation to be selected according to the application, content format and available wall space.
Direct Wall Mounting
The Bow mount secures directly to a suitable wall surface and positions the enclosed tablet approximately 4 inches from the wall. Its adjustable movement and cable routing make it suitable for reception areas, information points, visitor registration, service counters and other interactive tablet installations.
The Galaxy Tab Active Apex enclosure with Swing Wall Mount provides an adjustable wall-mounted position for compatible Samsung tablets, combining a keyed metal enclosure with a movable arm. The Swing Arm allows the display to swing, pan and tilt while extending from 4.5 to 10.2 inches from the wall. The enclosure retains access to the tablet cameras and sensors, while the mounting arrangement provides a practical format for interactive tablet use in areas where screen positioning needs to be changed for different users.
Key Features of Compulocks 827B80GAPXB
Compatible with Samsung Galaxy Tab Active3 8-inch models SM-T570, SM-T575 and SM-T577
Compatible with Samsung Galaxy Tab Active5 8-inch model SM-X306B
Swing, pan and tilt adjustment
Extends from 4.5 to 10.2 inches / 11.5 to 26 cm from the wall
Supports up to 4.8 lb / 1.95 kg
Quick keyed lock and unlock access
Exposed front and rear cameras and sensors
Charging cable access
Optional through-wall cable routing
Two enclosure keys included
Galaxy Tab Active Enclosure
The Apex enclosure holds compatible Galaxy Tab Active models within a metal frame and provides keyed access for controlled tablet removal. Open areas around the front and rear cameras and sensors allow these features to remain available while the tablet is secured inside the enclosure.
Swing and Pan Movement
The Swing Arm gives the mounted tablet multiple positioning options through swing, pan and tilt movement. This allows the screen to be adjusted toward different user positions, making it suitable for interactive applications where the viewing angle may need to change throughout the day.
Adjustable Wall Reach
The arm extends between 4.5 and 10.2 inches (11.5 to 26 cm) from the wall. This provides additional reach for the tablet and can be useful in installations around corners, beneath cabinets or in locations where users approach the display from different directions.
Keyed Tablet Security
The Apex enclosure uses a quick keyed locking mechanism to keep the Galaxy Tab Active secured during normal use. Two enclosure keys are supplied, allowing authorised access when the tablet needs to be removed or serviced.
VESA Mounting
The mounting assembly supports 75 x 75 mm and 100 x 100 mm mounting patterns. This provides a standard connection between the Swing Arm and compatible mounting hardware while keeping the enclosed tablet securely positioned on the wall.
Cable Access
Integrated cable management provides a route for the tablet charging connection through the mounting assembly. Optional through-wall routing can also be used where the installation requires the cable to pass directly through the wall area behind the mount.
The Compulocks 505B109GAPXB provides a secure wall-mounted enclosure for compatible Samsung Galaxy Tab S9, S9 FE, S10 FE, S10 Lite and S11 tablets. The black Apex enclosure keeps the tablet firmly positioned while leaving the touchscreen readily accessible, making it suitable for reception areas, self-service points, information displays, retail environments and other fixed tablet applications.
Key Features of Compulocks 505B109GAPXB
Supports 10.9-inch and 11-inch Galaxy Tab models
Secures the tablet within the enclosure for fixed installations
Suitable for customer-facing touchscreen applications
Wall-mounted format helps keep the tablet in a fixed position
Enclosure weight: 1.60 lb
Note: This specific enclosure model will not fit "Plus" or "Ultra" sized tablets, or devices from other brands like Apple iPad, as the internal spacing and physical port cutouts are custom-fitted to the dimensions of the Samsung Galaxy Tab models listed above
Secure Wall Mounting
The Apex enclosure provides a fixed location for a compatible Galaxy Tab, making it suitable for installations where the tablet needs to remain accessible while being held securely against a wall. It can be used for visitor check-in, customer information, self-service interfaces and interactive displays.
Apex Enclosure
The black Apex enclosure surrounds the compatible tablet while keeping the front touchscreen available for direct interaction. Its compact wall-mounted format works well in areas where counter space is limited or where the tablet needs to occupy a fixed position.
Interactive Tablet Applications
With the Galaxy Tab held at a fixed wall position, users can interact with the display without needing to pick up or reposition the device. This makes the enclosure suitable for digital information points, registration stations, customer service areas, point-of-information displays and other touchscreen applications.
Fixed Installation Format
The wall-mounted format keeps the tablet located at a consistent height and position, helping create a predictable user interface for shared environments. The black finish also provides a discreet appearance suitable for a range of commercial and public-facing settings.
The Compulocks 505B124GAPXB combines an Apex enclosure with a Bow tilting wall mount to provide a secure and flexible mounting arrangement for Samsung Galaxy Tab S9+, S9 FE+ and S10+ 12.4-inch tablets. The wall-mounted system allows the tablet to be tilted and panned for a more suitable viewing position, while the enclosure provides keyed access and keeps the front and rear cameras and sensors available for use.
Key Features of Compulocks 505B124GAPXB
Compatible with Samsung Galaxy Tab S9 FE+ | 12.4"| 2023 | SM-X610, SM-X616B, Galaxy Tab S9+ | 12.4"| 2023 | SM-X810, SM-X816B and Galaxy Tab S10+ | 12.4"| 2024 | SM-X820, SM-X826B, SM-X820N, SM-X826N
Bow tilting wall mount combined with an Apex tablet enclosure
Adjustable tilt and pan movement for flexible viewing angles
Supports portrait and landscape tablet orientations
Secure keyed enclosure access
Front and rear cameras and sensors remain accessible
Through-arm cable management for concealed cable routing
Hinge tension adjustment for controlled movement
100 x 100 mm and 75 x 75 mm VESA-compatible mounting interfaces
Tablet positioned approximately 4 inches from the wall
Flexible Tablet Positioning
The Bow mount provides tilt and pan adjustment, allowing the Galaxy Tab to be positioned according to the viewing requirements of the installation. This makes it practical for interactive displays where users may approach the screen from different positions.
Secure Apex Enclosure
The Apex enclosure holds the compatible Galaxy Tab securely while providing keyed access when the tablet needs to be installed or removed. The enclosure also leaves the device cameras and sensors exposed, allowing these functions to remain available during everyday use.
Portrait or Landscape Use
The mounting arrangement supports both portrait and landscape orientations, giving installers greater flexibility when positioning the tablet. This is useful for applications ranging from information displays and visitor registration to interactive kiosks and customer-facing interfaces.
Integrated Cable Routing
Through-arm cable management provides a route for the tablet's charging connection through the mounting arm, helping keep cabling contained within the installation. Hinge tension adjustment also allows the movement of the mount to be controlled according to the preferred positioning.
The Compulocks 505B146GUAPXB combines an Apex enclosure with a Bow tilting wall mount for Samsung Galaxy Tab S9 Ultra, S10 Ultra and S11 Ultra tablets. Supporting 14.6-inch models, the wall-mounted unit allows the screen to be tilted and panned toward the user while keeping the tablet securely held in place. Its concealed cable routing, keyed enclosure access and close-to-wall profile make it suitable for interactive displays, information points, reception areas and shared tablet installations.
Key Features of Compulocks 505B146GUAPXB
Combines an Apex tablet enclosure with a Bow tilting wall mount
Supports tilt and pan adjustment for flexible screen positioning
Lockable enclosure with keyed access
Front and rear cameras and sensors remain accessible
Hidden cable management through the mounting arm
Hinge tension adjustment for controlled movement
75 x 75 mm and 100 x 100 mm panel mounting interfaces
Positions the tablet approximately 4 inches from the wall
14.6-inch screen size compatibility
14.6-Inch Galaxy Tab Support
The enclosure accommodates Samsung's larger 14.6-inch Galaxy Tab Ultra models, including the Galaxy Tab S9 Ultra | 14.6" | 2023 | SM-X910, SM-X916B, SM-X918U, Galaxy Tab S10 Ultra | 14.6" | 2024 | SM-X920, SM-X926B, SM-X926N, SM-X920N and the Galaxy Tab S11 Ultra | 14.6" | 2025 | SM-X930, SM-X936B, SM-X936N, SM-X930N. This provides a dedicated mounting arrangement for installations requiring a larger touchscreen while retaining access to the tablet display.
Tilting and Panning Movement
The Bow mounting arm allows the tablet to tilt and pan, giving users greater control over the viewing direction. Hinge tension adjustment helps maintain the selected position, making the mount suitable for touchscreen displays used by people approaching from different angles.
Secure Tablet Enclosure
The Apex enclosure holds the Galaxy Tab securely within the wall mount and provides keyed access when the device needs to be installed or removed. The cameras and sensors remain exposed, allowing the tablet's relevant functions to remain available while mounted.
Concealed Cable Routing
Cables can be routed through the mounting arm, helping keep the tablet's power connection contained within the installation. This arrangement is particularly useful for fixed displays where the charging connection needs to remain routed between the tablet and wall.
Close-to-Wall Installation
The Bow mount places the tablet approximately 4 inches from the wall while retaining its adjustment range. The compact positioning is suitable for reception areas, customer information points, visitor registration stations and interactive touchscreen displays where available wall space needs to be used effectively.
The Compulocks 505B209SWLB combines a Swell enclosure with a Bow tilting wall mount to create a secure mounting point for the 10th-generation 10.9-inch iPad and 11th-generation A16 iPad. The aluminium wall mount provides tilt and pan adjustment, while the Swell enclosure is secured with tamper-proof screws. With support for portrait or landscape positioning and concealed cable routing through the mounting arm, it suits reception areas, information points, check-in stations and interactive tablet displays.
Key Features of Compulocks 505B209SWLB
Compatible with iPad 10th generation 10.9-inch models A2757 and A2777
Compatible with iPad 11th generation A16 11-inch models A3354, A3355 and A3356
Combines Swell enclosure with Bow tilting wall mount
Tilting and panning adjustment for flexible viewing angles
Tamper-proof screw security for the enclosure
Supports portrait and landscape tablet orientation
Exposed front and rear cameras and sensors
Hidden cable routing through the mounting arm
Hinge tension adjustment
75 x 75 mm and 100 x 100 mm VESA mounting interfaces
Swell Enclosure
The Swell enclosure holds the compatible iPad within a purpose-built frame and uses tamper-proof screws to help prevent unauthorised removal. The enclosure also leaves the front and rear cameras and sensors accessible, allowing the tablet to retain important functions while mounted.
Adjustable Wall Mount
The Bow mount provides both tilt and pan movement, allowing the screen to be positioned towards the preferred viewing direction. Hinge tension adjustment gives installers control over the movement of the mounting arm, making it suitable for shared touchscreen installations.
Flexible Orientation
The iPad can be mounted in either portrait or landscape orientation, providing flexibility for different applications and screen layouts. This makes the mount suitable for visitor registration, customer information, self-service interfaces and interactive displays.
Concealed Cable Management
The Bow mounting arm incorporates hidden cable routing, allowing the iPad's charging cable to pass through the mounting structure. This keeps the power connection contained and helps maintain a more organised installation around the wall-mounted tablet.
VESA Wall Installation
The mount provides 75 x 75 mm and 100 x 100 mm VESA mounting interfaces for wall installation. The tablet is positioned close to the wall while retaining the ability to adjust its viewing direction, making the unit suitable for fixed installations in commercial and public-facing areas.
Broad iPad Compatibility
The enclosure supports both the 10th-generation 10.9-inch iPad and the 11th-generation 11-inch iPad with A16 processor. This provides compatibility across two generations of Apple's standard iPad range within one mounting format.
The Compulocks 505BPMIP109 combines a PowerMove iPad mount with a Bow tilting wall bracket to provide a secure, adjustable mounting point for compatible 10th-generation and 11th-generation A16 iPads. The PowerMove mount provides cable-free charging through its integrated USB-C interface, while the Bow bracket allows the display to tilt and pan for easier viewing. With a lift-to-release mechanism, keyed security and integrated cable routing, it is suitable for interactive displays, reception areas, check-in points, retail counters and other fixed tablet installations.
Key Features of Compulocks 505BPMIP109
Compatible with iPad 10th generation 10.9-inch models A2757 and A2777
Compatible with iPad 11th generation A16 11-inch models A3354, A3355 and A3356
Supports power and data transfer through USB-C
Lift-to-release mechanism for quick tablet removal
Keyed locking mechanism for tablet security
Bow mount provides tilt and pan adjustment
Up to 130-degree tilting movement
Integrated cable management through the mounting arm
100 x 100 mm and 75 x 75 mm VESA mounting compatibility
Integrated kickstand on the tablet side
T-bar lock slot for additional security
Cable-Free Charging
The PowerMove mount incorporates a USB-C interface that transfers power and data while the iPad is attached. This allows the tablet to remain connected for charging without requiring a conventional charging cable to be plugged directly into the device each time it is mounted.
Quick Lift-to-Release Access
The lift-to-release mechanism allows the iPad to be detached from the PowerMove mount when required. A keyed locking mechanism helps keep the tablet secured during normal use, providing a practical combination of accessibility and controlled removal.
Adjustable Bow Mount
The Bow wall bracket provides tilt and pan movement so the display can be directed towards the intended viewing position. Its adjustment range makes it suitable for touchscreen applications where users may approach the tablet from different angles.
Integrated Cable Management
The mounting arm provides a route for cables, helping keep connections contained within the wall-mounted installation. The combination of concealed cable routing and the PowerMove charging interface reduces the need for exposed charging cables around the tablet.
VESA Wall Mounting
The Bow bracket supports both 100 x 100 mm and 75 x 75 mm VESA mounting patterns, allowing it to be secured directly to compatible wall mounting points. The bracket positions the display approximately 4 inches from the wall while retaining its tilting and panning capability.
Suitable for Shared Tablet Displays
The combination of secure mounting, adjustable positioning and cable-free charging makes this unit suitable for shared iPad applications such as visitor registration, self-service interfaces, customer information points, retail displays and reception areas where the tablet needs to remain accessible and ready for use.
The white Swell enclosure and Bow tilting wall mount provide a secure, adjustable platform for compatible iPad models. The mounting kit combines a tamper-resistant enclosure with a VESA wall mount that supports up to 130 degrees of tilt, while keeping the tablet's front and rear cameras and sensors accessible. Hidden cable routing and support for portrait or landscape positioning add flexibility for interactive displays and wall-mounted tablet installations.
Key Features of Compulocks 505W209SWLW
White Swell aluminium security enclosure
Up to 130 degrees of tilt adjustment
Portrait or landscape mounting orientation
Tamper-proof screws help prevent unauthorised enclosure removal
Exposed front and rear cameras and sensors
Through-arm cable management
75 x 75 mm and 100 x 100 mm VESA mounting patterns
Positions the tablet approximately 4 inches from the wall
Swell Security Enclosure
The Swell enclosure uses an aluminium frame to hold the iPad securely while maintaining access to the display, cameras and sensors. Tamper-proof screws provide an added level of physical security and help keep the tablet secured within the enclosure.
iPad Compatibility
The enclosure fits the 10.9-inch iPad 10th generation models A2757 and A2777, as well as the 11-inch iPad 11th generation A16 models A3354, A3355 and A3356. It is intended specifically for these iPad generations and is not suitable for 10.2-inch iPad models or iPad Air and iPad Pro variants.
Flexible Viewing Position
The Bow wall mount allows the tablet to tilt through a wide 130-degree range, making it easier to set the screen at a suitable viewing angle. The mount can also hold the iPad in either portrait or landscape orientation for different applications and screen layouts.
VESA Wall Mounting
The mounting assembly supports 75 x 75 mm and 100 x 100 mm VESA patterns, providing compatibility with standard VESA mounting arrangements. The tablet sits approximately 4 inches from the wall, creating space for the adjustable mount and allowing convenient interaction with the display.
Integrated Cable Routing
Through-arm cable management provides a concealed route for the iPad's charging connection through the mounting assembly. This keeps the cable positioned close to the mount and helps maintain an organised installation while the tablet remains connected to power.
White Finish
The white finish gives the mounting assembly a subtle appearance suitable for reception areas, information points, interactive displays and other wall-mounted tablet applications. The enclosure and Bow mount are supplied together as a single mounting kit.
The Apex enclosure and Bow tilting wall mount provide a secure wall-mounted setup for the 11-inch iPad Air M2 and M3. The metal enclosure uses keyed access while leaving the front and rear cameras and sensors available, and the adjustable mount provides up to 130 degrees of tilt. Support for portrait or landscape positioning, concealed cable routing and standard VESA mounting make this kit suitable for interactive tablet installations.
Key Features of Compulocks 505B11APXB
Compatible with Apple iPad Air 11-inch M2 and M3 models
Supports iPad Air M3 models A3266, A3267 and A3270
Lockable Apex high-grade aluminium enclosure
Bow wall mount with up to 130 degrees of tilt
Supports portrait and landscape tablet positioning
Exposed front and rear cameras and sensors
Through-arm cable management
75 x 75 mm and 100 x 100 mm VESA mounting points
Positions the tablet approximately 4 inches from the wall
Includes two enclosure keys
Apex Enclosure
The Apex enclosure uses a high-grade aluminium frame to hold the iPad Air in place and includes keyed access for controlled removal. Open areas around the tablet retain access to the front and rear cameras and sensors, allowing those features to remain available during wall-mounted use.
Tilting Bow Mount
The Bow wall mount provides up to 130 degrees of tilt, allowing the display to be positioned according to the viewing angle required. The tablet can also be mounted in either portrait or landscape orientation, making it suitable for different interactive display formats.
VESA Mounting
The mounting assembly supports 75 x 75 mm and 100 x 100 mm VESA mounting patterns. It holds the tablet approximately 4 inches from the wall, leaving room for the tilt mechanism while keeping the display within easy reach.
Cable Access
Through-arm cable management provides a concealed path for the charging connection. The enclosure also allows access for the charging cable, helping the iPad remain powered while mounted for continuous use.
Wall-Mounted Applications
The black enclosure and adjustable wall mount are suitable for tablet installations such as information points, interactive displays, reception areas and other locations where an iPad Air needs to remain securely positioned while still allowing users to interact with the screen.
The white Apex enclosure and Bow tilting wall mount provide a secure way to position an 11-inch iPad Air on a wall while keeping key tablet functions accessible. The lockable aluminium enclosure provides keyed access, while the adjustable mount supports tilting and panning for a more suitable viewing position. Integrated cable management, VESA compatibility and portrait or landscape positioning make the mounting kit suitable for a range of wall-mounted tablet applications.
Key Features of Compulocks 505W11APXW
Compatible with 11-inch iPad Air M2 and M3 models
Supports iPad Air M3 models A3266, A3267 and A3270
Lockable high-grade aluminium Apex enclosure
Bow tilting wall mount with up to 130 degrees of tilt
Supports portrait and landscape orientation
Exposed front and rear cameras and sensors
Integrated and through-arm cable management
75 x 75 mm and 100 x 100 mm VESA mounting patterns
Positions the iPad approximately 4 inches from the wall
Lockable Apex Enclosure
The Apex enclosure uses a high-grade aluminium frame to hold the iPad Air in position and incorporates a keyed locking mechanism. The enclosure provides access to the tablet's front and rear cameras and sensors, while charging cable access allows the iPad to remain connected when mounted.
Tilting Wall Mount
The Bow wall mount provides up to 130 degrees of tilt along with panning adjustment, giving users greater control over the tablet's viewing position. The iPad can be installed in portrait or landscape orientation to suit different display requirements.
VESA Mounting Options
The wall mount supports both 75 x 75 mm and 100 x 100 mm VESA mounting patterns. The assembly places the tablet approximately 4 inches from the wall, providing space for the adjustable mounting mechanism while keeping the screen accessible.
Cable Management
Through-arm cable management provides a route for the iPad's charging cable through the mounting assembly. This helps keep the cable contained around the wall mount while allowing the tablet to remain connected to power during use.
The Compulocks 505B830IPMSB iPad mini 8.3-inch Bow Tilting Wall Mount provides a secure and practical way to position compatible iPad mini models on a wall. Combining a lockable aluminium enclosure with a tilting Bow mount, it keeps the tablet securely held while allowing comfortable viewing from different angles.
The enclosure provides access to the camera and essential controls, while cable management through the mount helps keep charging connections routed neatly. Compatible with the 6th and 7th generation iPad mini (6th gen.) | 8.3" | 2021 | A2568 and iPad mini (7th gen. A17 Pro) | 8.3" | 2024 | A2993, A2995, A2996.
Key Features of Compulocks 505B830IPMSB
Compatible with iPad mini 6th Gen 8.3-inch and iPad mini 7th Gen 8.3-inch
Lockable high-grade aluminium enclosure
Tilting Bow wall mount for adjustable viewing angles
Supports portrait or landscape mounting
130-degree tilt capability
100 x 100 mm VESA mounting interface
Keyed locking mechanism with two enclosure keys included
Integrated cable management through the mount arm
Camera and essential tablet buttons remain accessible
Secure Tablet Enclosure
The aluminium enclosure holds the iPad mini securely while its keyed locking mechanism helps restrict unwanted removal. Open areas around the enclosure provide access to the camera and key controls, allowing the tablet to remain functional while mounted.
Adjustable Wall Positioning
The Bow mounting arm provides a 130-degree tilt range, making it possible to adjust the screen for different users and viewing positions. The mount supports both portrait and landscape orientations, giving installers greater flexibility when positioning the display.
Integrated Cable Management
Cables can be routed through the mounting arm to help maintain an organised connection between the wall-mounted tablet and its power source. The enclosure also allows the iPad mini to remain charged while secured in place, making it suitable for displays that need to remain available for extended periods.
The Compulocks 505W830IPMSW iPad mini 8.3-inch Bow Tilting Wall Mount combines a secure Space enclosure with an adjustable wall bracket for compatible 6th and 7th generation iPad mini models. The white enclosure uses a keyed locking mechanism to help protect the tablet while keeping the camera, sensors and selected controls accessible.
Key Features of Compulocks 505W830IPMSW
Compatible with iPad mini (6th gen.) | 8.3" | 2021 | A2568 and iPad mini (7th gen. A17 Pro) | 8.3" | 2024 | A2993, A2995, A2996 models
High-grade aluminium construction
Keyed locking mechanism with two keys included
130-degree tilting Bow wall mount
Supports portrait and landscape orientation
75 x 75 mm and 100 x 100 mm VESA mounting patterns
Through-arm cable management
Allows continuous charging while mounted
Exposed camera and sensors for continued tablet functionality
Direct-to-wall installation
Tablet positioned approximately 4 inches from the wall
Secure Space Enclosure
The Space enclosure provides a dedicated housing for the iPad mini, with a keyed lock helping to keep the tablet securely in place. Rounded edges and open corners allow ventilation around the device, while access around the camera, sensors and selected controls helps maintain everyday tablet functionality.
Adjustable Viewing Angle
The Bow wall mount provides up to 130 degrees of tilt, allowing the screen position to be adjusted for different users and viewing locations. Portrait or landscape installation gives additional flexibility for applications such as information displays, interactive kiosks, reception areas and customer-facing tablet stations.
Wall Mounting Flexibility
The Bow bracket supports both 75 x 75 mm and 100 x 100 mm VESA mounting patterns and secures directly to the wall. Its compact positioning keeps the mounted iPad mini approximately 4 inches from the wall, making it suitable where a close-to-wall tablet installation is required.
Continuous Power Access
The through-arm cable management allows the charging cable to be routed through the mount, helping maintain a tidy connection between the wall-mounted iPad mini and its power source. This allows the tablet to remain charged while secured in its enclosure for applications requiring regular or continuous access.
The Compulocks 505B11PAPX4B iPad Pro M4 11-inch Apex Enclosure Tilting Wall Mount provides a secure wall-mounted position for the 2024 iPad Pro 11-inch. Its aluminium Apex enclosure holds the tablet in place with a keyed locking mechanism while keeping the front and rear cameras and sensors accessible. The mount supports 75 x 75 mm and 100 x 100 mm VESA patterns, with integrated charging cable access allowing the iPad Pro to remain powered while secured. A tilting mounting arrangement also gives users flexibility when positioning the screen for viewing or interaction.
Key Features of Compulocks 505B11PAPX4B
Compatible with iPad Pro M4 | 11" | 2024 | A2836, A2837, A3006 and the iPad Pro M5 | 11" | 2025 | A3357, A3358, A3359
Apex secured aluminium enclosure
Keyed locking mechanism
Supports 75 x 75 mm and 100 x 100 mm VESA mounting patterns
Tilting wall mount for adjustable screen positioning
Front and rear cameras remain accessible
Sensors remain exposed for continued tablet functionality
Charging cable access for continuous power
Suitable for direct wall mounting
Secure iPad Pro Housing
The Apex enclosure provides a dedicated aluminium frame around the iPad Pro, with a keyed locking mechanism helping to keep the tablet secured against unwanted removal. The enclosure maintains access to the device's cameras and sensors, allowing important tablet functions to remain available while mounted.
Flexible Wall Positioning
The tilting mount allows the viewing angle of the iPad Pro to be adjusted according to the installation and user position. This makes the unit suitable for interactive displays, information points, reception desks, customer-facing areas and other locations where a wall-mounted tablet needs an adjustable screen position.
VESA Mount Compatibility
Support for both 75 x 75 mm and 100 x 100 mm VESA mounting patterns provides flexibility when fitting the enclosure to compatible wall brackets and mounting hardware. The mounting arrangement also allows the tablet to be positioned securely against a wall without requiring a separate tablet stand.
Accessible Tablet Functionality
The enclosure leaves the iPad Pro's front and rear cameras and sensors exposed, helping the tablet retain its intended functionality while mounted. Charging cable access also allows the device to stay connected to power during regular use.
The Compulocks 505B13PAPX4B iPad Pro M4 13-inch Apex Enclosure Tilting Wall Mount provides a secure wall-mounted position for the 13-inch iPad Pro M4 (2024). It combines a lockable metal Apex enclosure with an aluminium Bow mount that supports tilting and panning for adjustable viewing. The enclosure keeps the front and rear cameras and sensors accessible, while charging cable access allows the tablet to remain connected to power.
Key Features of Compulocks 505B13PAPX4B
Supports iPad Pro M4 models A2925, A2926 and A3007 and iPad Pro M5 A3360, A3361, A3362 models
Lockable Apex metal enclosure
Tilting and panning Bow wall mount
Supports 75 x 75 mm and 100 x 100 mm mounting patterns
Front and rear cameras remain accessible
Sensors remain exposed for continued functionality
Charging cable access
Hidden cable management through the mounting assembly
Hinge tension adjustment
Quick keyed access with two keys included
Positions the tablet approximately 4 inches from the wall
Lockable Apex Enclosure
The metal Apex enclosure holds the iPad Pro securely while a keyed locking mechanism helps prevent unauthorised removal. Quick keyed access makes it practical to remove the tablet when required, while the enclosure keeps important camera and sensor areas accessible.
Adjustable Viewing Position
The Bow wall mount provides both tilt and pan adjustment, allowing the display to be positioned according to the viewing location. The tablet sits approximately 4 inches from the wall, providing room for adjustment while maintaining a relatively close wall position.
Flexible Mounting
The mounting assembly supports 75 x 75 mm and 100 x 100 mm mounting patterns, giving installers flexibility when selecting compatible mounting hardware. The wall mount can also be fitted directly to a flat wall for applications requiring a fixed tablet display location.
Accessible Cameras and Sensors
The enclosure leaves the iPad Pro's front and rear cameras and sensors exposed, allowing these features to remain available during wall-mounted use. This makes the mount suitable for interactive displays and applications where camera access forms part of the tablet's function.
Managed Charging Connections
Charging cable access allows the iPad Pro to remain connected to power while secured within the enclosure. Hidden cable management routes the connection through the mounting assembly, helping keep the power lead contained around the wall installation.
The Compulocks 505W13PAPX4W iPad Pro M4 13-inch Apex Enclosure Tilting Wall Mount provides a secure wall-mounted position for the 13-inch iPad Pro M4 (2024). Its white aluminium and metal-frame enclosure uses a keyed lock to help keep the tablet secured, while the mounting assembly provides tilt and pan adjustment for flexible screen positioning.
Key Features of Compulocks 505W13PAPX4W
Compatible with Apple iPad Pro M4 13-inch (2024)
Keyed locking mechanism
Tilting and panning wall mount
Supports portrait and landscape orientations
Integrated cable management
Charging cable access
Front and rear cameras remain exposed
Supports 75 x 75 mm and 100 x 100 mm mounting patterns
Secure Apex Enclosure
The metal-frame Apex enclosure holds the iPad Pro securely while its keyed locking mechanism helps restrict unwanted removal. The enclosure provides a dedicated fit for the 13-inch tablet while keeping important areas such as the front and rear cameras accessible during use.
Adjustable Screen Position
The wall mount provides tilt and pan adjustment, allowing the iPad Pro display to be positioned according to the installation and viewing angle. Portrait and landscape orientations are supported, giving users flexibility for different display applications.
Flexible Wall Installation
The mounting system supports 75 x 75 mm and 100 x 100 mm mounting patterns, allowing it to work with compatible wall mounting hardware. The unit can be used for tablet displays in locations where a secure wall-mounted installation is required.
Integrated Cable Management
Integrated cable management provides a route for the iPad Pro charging connection through the mounting assembly. Charging cable access allows the tablet to remain connected to power while it is secured within the enclosure.
Accessible Cameras
The enclosure leaves the front and rear cameras exposed, allowing camera functions to remain available while the iPad Pro is mounted. This is useful for installations where the tablet needs to support interactive features or camera-based applications.
iPad Pro Compatibility
The mount is specified for the 13-inch iPad Pro M4 introduced in 2024, covering model numbers A2925, A2926 and A3007 and the iPad Pro M5 2025, A3360, A3361, A3362 models.
The Compulocks 505BUCLGVWMB Universal Tablet Cling Bow Tilting Wall Mount provides a secure and flexible way to position a wide range of tablets on a wall. The Cling holder uses adjustable arms and interchangeable support pads to accommodate tablets from approximately 7 to 13 inches, while concealed tamper-resistant screws help keep the device securely held. Through-arm cable management also provides a route for charging connections, making this mount suitable for interactive displays, check-in points, room scheduling and other wall-mounted tablet applications.
Key Features of Compulocks 505BUCLGVWMB
Universal compatibility for tablets approximately 7 to 13 inches
Supports tablet widths from approximately 7.09 to 10.63 inches
Compatible with tablet thicknesses from 0.20 to 0.37 inches
130-degree tilting Bow wall mount
Pan and tilt adjustment
Portrait and landscape orientation support
Through-arm cable management
Integrated security lock slot
Approximately 4-inch wall profile
Universal Tablet Compatibility
The Cling holder accommodates a broad selection of tablets, including iPad, Samsung Galaxy Tab, Microsoft Surface and other models within its supported size range. Adjustable arms and interchangeable pads allow the holder to accommodate different tablet dimensions and thicknesses without requiring a device-specific enclosure.
Secure Cling Holder
The Cling mount grips the tablet with adjustable arms, while concealed tamper-resistant screws help prevent straightforward removal of the holder. Interchangeable support pads provide contact points for tablets with different thicknesses, helping maintain a secure fit across compatible devices.
Adjustable Bow Wall Mount
The aluminium Bow mount provides tilt and pan adjustment, including up to 130 degrees of tilt, so the tablet can be positioned for comfortable viewing and interaction. The display can also be rotated between portrait and landscape orientations according to the requirements of the installation.
VESA Mounting Support
The Bow mounting assembly supports both 75 x 75 mm and 100 x 100 mm VESA mounting patterns, providing compatibility with standard VESA mounting arrangements. The tablet sits approximately 4 inches from the wall, giving the display room for adjustment while maintaining a relatively compact installation.
Through-Arm Cable Management
The Bow mount incorporates cable routing through the mounting arm, allowing the tablet's charging cable to pass through the assembly. This helps keep the power connection contained while the tablet remains secured in the Cling holder.
Wall-Mounted Tablet Applications
The combination of universal tablet support, adjustable viewing and integrated cable routing makes this mount suitable for applications such as digital signage, visitor check-in, room scheduling, self-service stations and information displays. Its flexible tablet compatibility also allows the same mounting arrangement to be used with different supported tablet models.
The Compulocks Universal Tablet Cling Swing Wall Mount White provides a flexible way to position tablets for interactive displays, kiosks, check-in points, point-of-sale areas and other indoor applications. Its universal Cling bracket accommodates a broad range of tablet sizes and thicknesses, while the swing arm allows the screen to move outward and fold back toward the wall when required.
Key Features of Compulocks 827WUCLGVWMW
Supports tablets from 0.20" to 0.37" (5.1 to 9.3 mm) thick
Adjustable Cling bracket with interchangeable support pads
Supports portrait and landscape orientations
Swing arm extends from approximately 4.5" to 10.2" (11.5 to 26 cm) from the wall
Provides tilt, pan and swing movement for flexible viewing positions
Integrated cable management with optional through-wall cable routing
Universal Tablet Compatibility
The Cling bracket accommodates tablets with widths from approximately 7.09" to 10.63" and thicknesses between 0.20" and 0.37". Three interchangeable support pads provide different contact ranges, helping accommodate tablets with varying chassis thicknesses.
Flexible Swing Movement
The articulated swing arm lets the tablet move away from the wall and return closer to the mounting surface when it is not being used. With tilt, pan and swing adjustment, users can position the display for different viewing angles and interaction points.
Portrait or Landscape Viewing
The tablet bracket can rotate between portrait and landscape orientation, giving installers greater freedom when setting up customer-facing displays, information points, check-in stations or interactive kiosks. The 100 x 100 mm VESA mounting arrangement also supports straightforward attachment to compatible mounting surfaces.
Secure Cable Management
Integrated cable routing helps keep charging leads contained around the tablet and mounting arm. Optional through-wall routing can be used where cables need to pass behind the mounting surface, making it practical for installations where continuous tablet charging is required.
Practical Wall-Mounted Applications
The swing mount is suitable for indoor tablet installations in retail, hospitality, education, healthcare and reception areas. Its adjustable positioning makes it useful for self-service interfaces, visitor check-in, digital information displays and other applications where users need convenient access to a wall-mounted tablet.
The Compulocks 201MVHBMM01 magnetic wall mounting kit provides a flexible way to position tablets on a wall while allowing the device to be lifted from its magnetic connection for handheld use. A 100 x 100 mm VESA magnetic plate attaches to the wall bracket, while the adhesive tablet plate provides a quick connection point for compatible tablets. The black steel mounting assembly supports portrait and landscape orientations and includes a security slot for an optional cable lock.
Key Features of Compulocks 201MVHBMM01
Universal magnetic wall mount for tablets
Suitable for iPads and tablets of different brands and sizes
Magnetic attachment allows quick tablet removal and docking
Supports portrait and landscape orientations
Security slot for optional cable lock
Suitable for both display and handheld tablet use
Universal Tablet Mounting
The Magnetix system accommodates tablets from different manufacturers and is intended for universal tablet mounting. The adhesive plate attaches directly to the rear of a compatible tablet, allowing the device to connect to the magnetic mounting point without requiring a tablet-specific enclosure.
Magnetic Tablet Connection
The magnetic connection makes it possible to lift the tablet away from the wall mount when handheld interaction is required and return it to the mounting point afterwards. This gives users flexibility between fixed display use and direct tablet interaction.
Portrait and Landscape Use
The magnetic mounting arrangement allows the tablet to be positioned in either portrait or landscape orientation. Users can change the tablet's viewing position to suit different content layouts and interaction requirements.
Flexible Tablet Interaction
The combination of magnetic docking and handheld access makes the mount suitable for tablet displays where users may need to remove the device temporarily. It can be used for customer interaction, information displays, assisted service and other tablet-based applications where flexible positioning is required.
The Compulocks 505BSMP01B Universal Invisible Mount Bow Tilting Wall Mount provides a discreet way to secure a compatible tablet against a wall while allowing the screen to be adjusted for comfortable viewing and interaction. Its adhesive mounting plate supports universal tablet compatibility for devices up to 13 inches and a maximum load of 5 lb, while the Bow wall mount provides tilt and pan movement.
Key Features of Compulocks 505BSMP01B
Supports tablets with screens up to 13 inches
Maximum load capacity of 5 lb / 2.27 kg
130-degree tilt adjustment
Pan adjustment for flexible viewing positions
Integrated cable management
Adjustable Bow Wall Mount
The Bow mounting arm provides up to 130 degrees of tilt along with pan adjustment, giving users greater control over the tablet viewing angle. The adjustable movement is useful where the screen needs to be positioned for different users or viewing directions.
VESA Mounting Compatibility
The wall mount supports both 75 x 75 mm and 100 x 100 mm VESA mounting patterns. This provides flexibility when installing the Bow assembly on compatible mounting surfaces or configurations.
Cable Management
Integrated cable management helps route the tablet cable through the mounting assembly rather than leaving it loose around the wall mount. This keeps the charging connection positioned close to the tablet while helping reduce exposed cable length.
Discreet Wall Installation
The invisible mounting plate provides a low-visibility attachment point behind the tablet, giving the installation a compact appearance. Its universal adhesive attachment makes it suitable for tablet displays, information points, interactive screens and other wall-mounted applications where a tablet needs to remain accessible.
The Compulocks 209APXB wall mount provides a secure wall-mounted holder for compatible iPad models while keeping the screen, cameras and key device functions accessible. Its metal enclosure accommodates the 10.9-inch iPad 10th generation and 11-inch iPad 11th generation with A16, while the mounting points support 75 x 75 mm and 100 x 100 mm VESA patterns.
Key Features of Compulocks 209APXB
Compatible with iPad 10th generation 10.9-inch
Compatible with iPad 11th generation A16 11-inch
Supports iPad 10th generation models A2757 and A2777
Supports iPad 11th generation A16 models A3354, A3355 and A3356
75 x 75 mm and 100 x 100 mm VESA mounting patterns
Front and rear camera access
Access to device sensors and controls
Supports portrait and landscape orientations
Charging cable access
Apex Enclosure
The Apex enclosure holds the iPad securely while providing openings that keep the front and rear cameras and sensors available for use. The enclosure format is suited to wall-mounted tablet applications where the device needs to remain accessible for viewing and interaction.
VESA Mounting
The mounting points support both 75 x 75 mm and 100 x 100 mm VESA patterns, giving the enclosure compatibility with a range of suitable wall mounting hardware. This allows the tablet position to be selected according to the installation requirements.
Portrait and Landscape Use
The enclosure supports both portrait and landscape tablet orientations, allowing the screen position to match the content being displayed. Users can select the orientation that best suits interactive displays, information points, check-in areas and other wall-mounted tablet applications.
Camera and Sensor Access
Cutouts in the enclosure leave the iPad's front and rear cameras and sensors accessible. This allows applications that rely on camera functions or device sensing to continue operating while the tablet remains secured in its wall-mounted enclosure.
Charging Access
The enclosure provides access for the iPad charging connection, allowing the tablet to remain powered while mounted. This makes it suitable for installations where the device is intended to remain in position for extended periods of use.
The Compulocks 209APXW enclosure provides a secure wall-mounted holder for compatible iPad models while keeping the device accessible for everyday interaction. The metal enclosure supports the 10.9-inch iPad 10th generation and 11-inch iPad 11th generation with A16, with openings that provide access to the cameras and sensors.
Key Features of Compulocks 209APXW
Quick-release keyed access
Exposed front and rear cameras and sensors
Charging cable access
Wall-mountable enclosure
Compatible iPad Models
The enclosure accommodates the 10.9-inch iPad 10th generation from 2022 and the 11-inch iPad 11th generation with A16 from 2025. The compatible model numbers include A2757 and A2777 for the 10th generation, along with A3354, A3355 and A3356 for the A16 generation.
Keyed Enclosure Access
The Apex enclosure uses keyed access to help keep the iPad secured within its mounting frame while still allowing authorised access when the device needs to be removed. This arrangement is suitable for wall-mounted tablet installations where the iPad remains in a fixed location.
Camera and Sensor Access
Openings in the enclosure leave the iPad's front and rear cameras and sensors available for use. This allows the mounted tablet to continue supporting applications that rely on imaging, scanning or device sensors.
VESA Mounting
The enclosure supports both 75 x 75 mm and 100 x 100 mm VESA mounting patterns, providing compatibility with suitable wall mounting hardware. The mounting arrangement allows the tablet to remain securely positioned while providing convenient access to the screen.
Charging Access
Charging cable access allows the iPad to remain connected to power while installed in the enclosure. This makes the mount suitable for applications where the tablet is intended to remain available for regular interaction over extended periods.
