The Compulocks 150B580APXB Surface Pro 8-11 Apex Enclosure Swift Floor Stand - Black combines a secure aluminium enclosure with a freestanding floor stand for Microsoft Surface Pro tablets. The Apex enclosure accommodates 13-inch Surface Pro models from generations 8 through 11, with openings that retain access to the front and rear cameras and sensors.
Key Features of Compulocks 150B580APXB
Quick-release keyed locking mechanism
Maintains access to front and rear cameras and sensors
Adjustable tilt range from 90° to -55°
Locking tilt mechanism for secure screen positioning
Concealed charging cable routing through the enclosure
Large cable openings within the stand
Supports screens up to 15.6 inches when used with compatible VESA-mounted devices
Surface Pro Compatibility
The Apex enclosure is intended for 13-inch Microsoft Surface Pro tablets, covering Surface Pro 9, Surface Pro 10, Surface Pro 11 and Surface Pro 12 2026. This provides compatibility across several generations while retaining the same floor-standing format for reception areas, interactive displays and other tablet-based installations.
Secure Apex Enclosure
The aluminium enclosure holds the Surface Pro securely and incorporates a quick-release keyed lock for controlled access to the tablet. Cutouts around the enclosure allow the Surface Pro's cameras and sensors to remain available while the device is mounted.
Adjustable Screen Position
The Swift mounting system allows the display to tilt through a 145-degree range, from 90° to -55°. A locking mechanism holds the selected viewing angle, making it possible to position the Surface Pro for different users and applications.
VESA Mounting
The stand supports both 75 x 75 mm and 100 x 100 mm VESA mounting patterns. This connection provides a secure interface between the Apex enclosure and the Swift stand, while also allowing the stand to accommodate other compatible VESA-mounted displays within its stated load limits.
Floor Installation and Cable Routing
At approximately 95.5 cm tall, the Swift stand provides a practical height for floor-level tablet installations. It can be left freestanding or fixed to the floor using four screw points. Charging cables can pass through the enclosure and stand using the concealed cable route and larger internal openings.
Public-Facing Tablet Use
The combination of a locking enclosure and floor-mounted presentation makes this stand suitable for reception areas, self-service points, retail environments, exhibitions, information displays and other locations where a Surface Pro needs to remain accessible while securely mounted.
When combined with the BrandMe panel, the Apex MS Surface enclosure turns any environment into a branded experience, ideal for events, exhibitions, and hospitality receptions. This innovative configuration provides a customizable panel for branding, calls to action, or bespoke designs, with the option for internal lighting to amplify your message. The tilting mounting plate guarantees optimal visibility, making it a perfect selection for captivating and interacting with your audience.
Universal Tablet Brandable Floor Stand - Cling BrandMe
BrandMe Floor stand - Black with Cling Vesa Tablet Mount - Black
A secure tablet floor stand designed to offer full tablet functionality. The Cling BrandMe Floor Stand is designed to work with all iPad models with just one device! This updated version is compatible with a variety of tablet models and sizes making it a near universal tablet security solution.
Our BrandMe Stand has a customizable display panel allows you to draw attention to the stand and will give your establishment a professional feel.
The BrandMe Stand has a full tilt for an easy was to reverse the screen for ideal viewing and safe interaction. The wires are housed in the base so you always have a clean look. The all steel base is weight balanced to prevent tip-overs at any screen angle. Securing your tablet is a re-designed bracket clamp and VESA wall mount base.
Key Features:
Compatible With Tablets 7" - 13"
Brand-able Secure Floor Stand
Rotates Between Orientation Modes
Full Tilt VESA Mount Plate
Tamper Proof Design
Secure Cable Management
The most notable update is to the 100mm x 100mm VESA wall mount now includes cable management and hidden screw holes. The Cling bracket can still rotate between portrait and landscape mode and setup is quick and easy. The Cling BrandMe Stand offers two added levels of security in that it can be bolted down to the floor or used as a free moving kiosk when paired with one of our security cable locks.
Graphic Panel Specifications:
Width: 6.0” / 15.24cm
Height: 34.75” / 88.26cm
Max Graphics / Artwork Width: 5.0”- 5.25” / 12.7cm - 13.34cm
Maximum Material Thickness of .250” / 6.35mm
Option of using two pieces of .125” / 3.18mm thickness material back to back
Cling mount fits all iPads, Samsung Galaxy Tab A and S models, and Microsoft Surface Pro and Go tablets.
Cling is also compatible with:
Amazon Fire 8 and Amazon Fire 10 (HD) tablets and other Amazon Fire models
Acer tablets
Asus tablets
Huawei tablets
Lenovo tablets
Xiaomi Pads
and other tablet brands and models
Compatibility:
Tablets up to 13”
Screens Weight: 2 lbs
Dimensions: 10.75” x 6” x 4.5”
Max Dimension: 8.50” / 216mm
Min Dimension: 6.50” / 165mm
Max Thickness: 0.36" /9.3mm
Universal Cling BrandMe Includes:
Universal Tablet Mount
BrandMe Floor Stand
Adjusting / Tensioning Tool
Mount Cover
BrandMe Floor stand - Black 140B with Cling Vesa - Black UCLGVWMB
*The central panel is supplied blank. We provide the graphic panel specifications and you can get it printed to suit your needs at almost any print shop.*
The Compulocks 140B510APXB Surface Go 1-4 Gen Apex Enclosure Brandable Floor Stand Black combines a secure Surface Go enclosure with a freestanding display stand and customisable branding panel. It supports Surface Go generations 1 through 4, with the tablet held in an Apex enclosure that provides keyed access and cable routing. The 42-inch-high stand can be used for reception areas, retail displays, exhibitions, events, information points and other public-facing installations.
Key Features of Compulocks 140B510APXB
Apex enclosure with keyed access for the Surface Go tablet
Black freestanding floor stand for public-facing installations
Includes a 2 mm thick polypropylene brandable graphic panel
Panel provides space for logos, promotional graphics or wayfinding messages
Supports landscape and portrait screen orientation
Full screen tilt adjustment for flexible viewing positions
Internal cable management through the stand
100 x 100 mm VESA-compatible mounting interface
Approximate stand height of 42 inches (107 cm)
Surface Go Compatibility
The Apex enclosure accommodates Microsoft Surface Go models from the first generation through the fourth generation. This covers the 10-inch Surface Go released in 2018, followed by the 10.5-inch Surface Go 2, Surface Go 3 and Surface Go 4 models. The enclosure keeps the tablet securely positioned while allowing access to key device functions.
Brandable Display Panel
The central panel provides a dedicated area for printed branding, promotional content, directions or other messaging. The supplied polypropylene panel measures approximately 6.3 inches wide by 36.61 inches high, with a printable area of up to 5.9 inches by 33.07 inches. Its blank format allows graphics to be produced according to the requirements of the installation.
Flexible Screen Positioning
The VESA mounting arrangement supports both portrait and landscape tablet positioning, while the screen mount provides tilt adjustment for different viewing angles. This makes the stand suitable for interactive displays, information kiosks, registration points and customer-facing tablet applications.
Cable Management and Installation
Cables can be routed through the stand to keep the tablet connection contained within the floor-standing structure. The stand uses a one-piece metal construction for straightforward assembly and can also be secured to the floor through its mounting points when a more permanent installation is required.
Suitable Applications
This floor stand is well suited to retail environments, exhibitions, trade shows, reception areas, hospitality venues, information points and self-service displays. The combination of a Surface Go enclosure, adjustable screen position and large branding panel allows the same stand to present interactive content while carrying location-specific messaging.
The Compulocks 150B510APXB Surface Go 1-4 Gen Apex Enclosure Swift Floor Stand - Black combines a secure metal tablet enclosure with a fixed-height floor stand for Microsoft Surface Go devices. The Apex enclosure provides keyed access, exposed camera and sensor areas, and support for 75 x 75 mm and 100 x 100 mm VESA mounting. Its Swift stand reaches approximately 95.5 cm in height and can remain freestanding or be secured to the floor for installations where a stable tablet presentation is required.
Key Features of Compulocks 150B510APXB
Compatible with Microsoft Surface Go 1, Go 2, Go 3 and Go 4
Supports Surface Go screen sizes from 10-inch to 10.5-inch
High-grade aluminium Apex enclosure
Quick-release keyed locking mechanism
Exposed front and rear camera and sensor areas
Adjustable tilt range from 90° to -55°
Locking tilt mechanism
Concealed charging cable routing
Surface Go Compatibility
The enclosure accommodates four generations of Microsoft Surface Go tablets, covering the original 10-inch model from 2018 and the 10.5-inch Surface Go 2, Go 3 and Go 4 models. This broad generation range allows the same floor stand format to be used across compatible Surface Go deployments.
Apex Enclosure
The metal Apex enclosure holds the Surface Go securely while retaining access to the tablet's front and rear cameras and sensors. A quick-release keyed lock provides controlled access to the device, while the enclosure also accommodates charging cable routing to keep the connection contained around the tablet mount.
Adjustable Viewing Angle
The Swift stand incorporates a locking tilt mechanism with an adjustment range from 90° to -55°. This allows the Surface Go display to be positioned for different users and viewing situations while keeping the tablet firmly attached to the stand.
Stable Floor Mounting
Standing approximately 95.5 cm tall, the Swift floor stand provides a convenient height for customer-facing and information-display applications. It can operate as a freestanding unit or be fixed to the floor using four screw points when a more permanent installation is required.
Cable Routing
Large openings within the stand provide a route for charging and connection cables, while the enclosure conceals the charging cable around the tablet. This arrangement helps keep cables contained as the Surface Go is used on reception counters, retail floors, information points and other public-facing areas.
The Compulocks 150B830IPMSB iPad mini 6th-7th Gen 8.3 Inch Space Enclosure Swift Floor Stand in Black provides a secure floor-mounted platform for compatible iPad mini models. The Space enclosure uses a high-grade aluminium construction with a quick-release keyed lock, while its open-corner format keeps the tablet's ports and controls accessible. The Swift stand adds a 95.5 cm fixed-height structure, adjustable viewing angle and internal cable routing for public-facing tablet installations.
Key Features of Compulocks 150B830IPMSB
Compatible with iPad mini 6th Gen 8.3-inch and iPad mini 7th Gen 8.3-inch models
Supports iPad mini 6th Gen model A2568
Supports iPad mini 7th Gen A17 Pro models A2993, A2995 and A2996
High-grade aluminium Space enclosure
Quick-release keyed locking mechanism
Open corners provide access to tablet controls and connections
Swift floor stand measures approximately 95.5 cm tall
Adjustable tilt from 90° to -55°
75 x 75 mm and 100 x 100 mm VESA-compatible mounting
iPad Mini Compatibility
The enclosure accommodates the 8.3-inch iPad mini 6th Gen from 2021 and iPad mini 7th Gen with A17 Pro from 2024. The supported models include A2568 for the sixth generation and A2993, A2995 and A2996 for the seventh generation. It is not intended for the older 7.9-inch iPad mini generations.
Space Enclosure
The Space enclosure uses a high-grade aluminium body with open corners that provide access around the mounted tablet. A quick-release keyed locking mechanism helps keep the iPad mini secured in its enclosure while still allowing authorised access when the device needs to be removed.
Continuous Charging
The enclosure allows the charging connection to remain attached while the iPad mini is mounted. Cable routing through the enclosure and the larger openings in the Swift stand provide a practical path for power connections without requiring the tablet to be removed during charging.
Adjustable Viewing Angle
The Swift floor stand provides a broad tilt range from 90° to -55°, allowing the iPad mini screen to be positioned for different viewing situations. This makes the stand suitable for interactive displays, registration points, information stations and customer-facing tablet applications.
Floor Stand Construction
The Swift stand reaches approximately 95.5 cm in height and can be used as a freestanding unit or fixed to the floor through four screw points. Its VESA-compatible mounting arrangement supports 75 x 75 mm and 100 x 100 mm patterns, providing a secure connection between the enclosure and stand.
