cAP Access Points

CAP-2ND - cAP (Ceiling/Wall Access Point) Dual-Chain 2.4GHz, 650MHz CPU, RouterOS L4, 802.3at/af support + UK PSU

The cAP-2nD supports 802.11b/g/n and can be powered by PoE. Its a perfect companion for the MikroTik CAPsMAN (controlled AP system manager), allowing you to control all of your AP devices from one central location.

Unlike traditional controller software, which requires a separate PC/Mac to run, the CAPsMAN runs on any existing RouterBOARD device in your network. No need for a separate controller device.

Everything is included to get you started, wall/ceiling mount, PoE injector, power adapter and even the screws and rawl plugs.


The device has an operating system preinstalled and licenced. No separate licence or OS purchase is necessary and the product is ready to use. The device includes free software updates for the life of the product or a minimum of 5 years starting from date of purchase...


RBcAP2nD Specifications:



CPU nominal frequency: 650 MHz
CPU core count: 1
Size of RAM: 64 MB
10/100 Ethernet ports: 1
Wireless standards: 802.11b/g/n
Wireless chip model: QCA9533
Supported input voltage: 11 V - 57 V
PoE in: 802.3af/at
Dimensions: 185mm diameter, 31mm height
Operating System: RouterOS
Tested ambient temperature: -30°C to +70°C
Licence level: 4
Antenna gain dBi: 2
CPU: QCA9533
Max Power consumption: 4W
Number of chains: 2
Storage type: FLASH
Storage size: 16 MB

RBCAPGI-5ACD2ND - cAP ac (Ceiling/Wall Access Point) - Dual-band 2.4 / 5GHz wireless access point for mounting on a ceiling or wall with two Gigabit Ethernet ports (one with PoE output), 802.11ac support and IPsec hardware encryption support.

The cAP AC radio also features a repeater mode, this coupled with the two Ethernet ports gives you the ability to extend your network with cables or wirelessly.

The RBcAPGi-5acD2nD supports 802.3af/at PoE input on the first port, and passive PoE output on the second port, letting you chain PoE devices.

The cAP ac is a very capable and powerful wireless access point despite its size. The concurrent dual band wireless radio supports dual chain 2 GHz 802.11b/g/n and 5 GHz in a/n/ac standards, and provides a strong omni-directional signal.


The device has an operating system preinstalled and licenced. No separate licence or OS purchase is necessary and the product is ready to use. The device includes free software updates for the life of the product or a minimum of 5 years starting from date of purchase...


RBcAPGi-5acD2nD Specifications:



10/100 Ethernet ports: None
10/100/1000 Ethernet ports: 2
Antenna gain: 2
Antenna gain dBi for Wireless 2: 2.5
Architecture: ARM 32bit
CPU: IPQ-4018
CPU core count: 4
CPU nominal frequency: 716 MHz
Dimensions - Round case: 136 mm diamater, height 30 mm; 
Dimensions - Square case: 145 mm x 145 mm height 30 mm
Ethernet Combo ports: 0
Licence level: 4
Max Power consumption without attachments: 13 W
Max power consumption: 24 W
Number of DC inputs: 1
Number of SIM slots: 0
Number of USB ports: 0
Operating System: RouterOS
PoE in: 802.3af/at
PoE in input Voltage: 17-57 V
SFP ports: None
SFP+ ports: None
Size of RAM: 128 MB
Storage size: 16 MB
Wireless 1 band: 2.4 GHz
Wireless 1 Number of chains: 2
Wireless 2 band: 5 GHz
Wireless 2 Number of chains: 2

cAP XL ac  (Ceiling Access Point) - The ceiling AP on steroids! Our bestseller cAP is back - juiced up and stronger than ever. 

The new cAP XL ac design features a larger high-gain antenna, higher sensitivity, and a built-in reflector. These improvements allow for an increased coverage area of up to 100%, compared to the previous cAP models.

The dual-band, dual-chain 2.4 and 5 GHz wireless radios provide improved 360 degree coverage, no need to worry about placement. Mounting the RBcAPGi-5acD2nD-XL on the ceiling eliminates most signal absorption problems, such as the signal being blocked by large TV sets, metal cubicle walls in open space offices, etc.

Even though the radio supports repeater mode, the two Gigabit Ethernet ports offer the ability to extend your network with cables, if PoE power is required on the second device: the cAP XL ac supports 802.3af/at PoE input on the first port and passive PoE output (up to 57V) on the second port.


The device has an operating system preinstalled and licenced. No separate licence or OS purchase is necessary and the product is ready to use. The device includes free software updates for the life of the product or a minimum of 5 years starting from date of purchase...


MikroTik Product News: cAP XL ac:




RBcAPGi-5acD2nD-XL Specifications:



Architecture: ARM 32bit
CPU: IPQ-4018
CPU core count: 4
CPU nominal frequency: 716 MHz
RouterOS Licence: 4
Operating System: RouterOS
Size of RAM: 128 MB
Storage size: 16 MB
Storage type: FLASH
MTBF: Approximately 100'000 hours at 25°C
Tested ambient temperature -40°C to 70°C
Wireless 2.4 GHz Max data rate: 300 Mbit/s
Wireless 2.4 GHz number of chains: 2
Wireless 2.4 GHz standards: 802.11b/g/n
Antenna gain dBi for 2.4 GHz: 6
Wireless 2.4 GHz chip model: IPQ-4018
Wireless 2.4 GHz generation: Wi-Fi 4
Wireless 5 GHz Max data rate: 867 Mbit/s
Wireless 5 GHz number of chains: 2
Wireless 5 GHz standards: 802.11a/n/ac
Antenna gain dBi for 5 GHz: 5.5
Wireless 5 GHz chip model: IPQ-4018
Wireless 5 GHz generation: Wi-Fi 5
10/100/1000 Ethernet ports: 2
Number of 1G Ethernet ports with PoE-out: 1
Number of DC inputs: 1 (PoE-IN)
Max power consumption: 24 W
Max power consumption without attachments: 11 W
FAN count: Passive
PoE in: 802.3af/at
PoE in input Voltage: 18-57 V
PoE-out ports: Ether2
PoE out: Passive PoE up to 57V
Max out per port output: (input 18-30 V) 500 mA
Max out per port output: (input 30-57 V) 330 mA
Max total out: 500 mA
Certification: CE, FCC, IC, EAC, ROHS
Mode button: Yes

RBCAPL-2ND - cAP lite (Ceiling/Wall Access Point) Low-cost dual-chain 2.4GHz AP with wall and ceiling enclosures.

The MikroTik cAP lite is a tiny, sleek, access point derived from the cAP-2nD. Its size and ability to be customised makes it perfect for public locations and businesses, such as; hotels, airports, shopping malls, convention centres, reception areas and more. Included with the cAP LITE are two easily-swappable casings or you can design your own to fit in with your environment. 

MikroTik provide 3D printer friendly design files* which can be downloaded from MikroTik by clicking here (Or copy/paste the link below into your browser)

The cAP LITE supports 802.11b/g/n and power over ethernet. It's a perfect companion for the MikroTik CAPsMAN (controlled AP system manager), allowing you to control all your AP devices from one central location. The cAP lite can also be used as a stand alone access point with all of the features of RouterOS.


The device has an operating system preinstalled and licenced. No separate licence or OS purchase is necessary and the product is ready to use. The device includes free software updates for the life of the product or a minimum of 5 years starting from date of purchase...

*https://mikrotik.com/product/RBcAPL-2nD-307#fndtn-downloads


RBcAPL-2nD Specifications:

10/100 Ethernet ports: 1
10/100/1000 Ethernet ports: None
Antenna gain: 1.5
Architecture: MIPSBE
CPU: QCA9533
CPU core count: 1
CPU nominal frequency: 650 MHz
Dimensions: Wall case - 88 x 52 x 20 mm
Dimensions: Ceiling case - diameter 88 mm x 20 mm deep
Ethernet Combo ports: 0
Licence level: 4
Max power consumption: 4 W
Number of DC inputs: 2
Number of SIM slots: 0
Number of USB ports: 1
Operating System: RouterOS
PoE in: 802.3af/at
PoE in input Voltage: 10-60 V
SFP ports: None
SFP+ ports: None
Size of RAM: 64 MB
Storage size: 16 MB
USB slot type: micro USB type AB
Wireless 1 band: 2.4 GHz
Wireless 1 Number of chains: 2