Brand Compatible 100G SR4 (multimode) Transceivers

Arista Compatible 100G SR4 (multimode) Transceiver

The QSFP28 SR4 full-duplex optical module offers 4 independent transmit and receive channels, each capable of 26Gbps operation for an aggregate data rate of 104Gbps 70m using OM3 fibre.

The QSFP28 SR4 Transceiver is a Four-Channel, Pluggable, Parallel, Fibre-Optic QSFP28 Module for IEEE 802.3bm, 100GBASE SR4 Applications or 40 Gigabit Ethernet and Infiniband FDR/EDR Applications.

These modules are designed to operate over multimode fibre systems using 850nm VCSEL laser array. An optical fibre ribbon cable with an MPO/MTPTM connector can be plugged into the QSFP module receptacle. QSFP28 SR4 is a parallel transceiver which provides increased port density and total system cost savings.

Features:

Four-channel full-duplex transceiver modules
Transmission data rate up to 26Gbit/s per channel
Up to 70m on OM3 Multimode Fibre (MMF)and 100m on OM4 MMF
Low power consumption <3.5W
Operating case temperature 0°C to 70°C
3.3V power supply voltage
RoHS 6 compliant
Hot Pluggable QSFP form factor
MPO connector receptacle
Built-in digital diagnostic function
Applications:

IEEE 802.3bm 100GBASE SR4 and 40GBASE SR4
Proprietary High Speed Interconnections
Data centre

Brocade/Ruckus Compatible 100G SR4 (multimode) Transceiver

The QSFP28 SR4 full-duplex optical module offers 4 independent transmit and receive channels, each capable of 26Gbps operation for an aggregate data rate of 104Gbps 70m using OM3 fibre.

The QSFP28 SR4 Transceiver is a Four-Channel, Pluggable, Parallel, Fibre-Optic QSFP28 Module for IEEE 802.3bm, 100GBASE SR4 Applications or 40 Gigabit Ethernet and Infiniband FDR/EDR Applications.

These modules are designed to operate over multimode fibre systems using 850nm VCSEL laser array. An optical fibre ribbon cable with an MPO/MTPTM connector can be plugged into the QSFP module receptacle. QSFP28 SR4 is a parallel transceiver which provides increased port density and total system cost savings.

Features:

Four-channel full-duplex transceiver modules
Transmission data rate up to 26Gbit/s per channel
Up to 70m on OM3 Multimode Fibre (MMF)and 100m on OM4 MMF
Low power consumption <3.5W
Operating case temperature 0°C to 70°C
3.3V power supply voltage
RoHS 6 compliant
Hot Pluggable QSFP form factor
MPO connector receptacle
Built-in digital diagnostic function
Applications:

IEEE 802.3bm 100GBASE SR4 and 40GBASE SR4
Proprietary High Speed Interconnections
Data centre

Cisco Systems Compatible 100G SR4 (multimode) Transceiver

The QSFP28 SR4 full-duplex optical module offers 4 independent transmit and receive channels, each capable of 26Gbps operation for an aggregate data rate of 104Gbps 70m using OM3 fibre.

The QSFP28 SR4 Transceiver is a Four-Channel, Pluggable, Parallel, Fibre-Optic QSFP28 Module for IEEE 802.3bm, 100GBASE SR4 Applications or 40 Gigabit Ethernet and Infiniband FDR/EDR Applications.

These modules are designed to operate over multimode fibre systems using 850nm VCSEL laser array. An optical fibre ribbon cable with an MPO/MTPTM connector can be plugged into the QSFP module receptacle. QSFP28 SR4 is a parallel transceiver which provides increased port density and total system cost savings.

Features:

Four-channel full-duplex transceiver modules
Transmission data rate up to 26Gbit/s per channel
Up to 70m on OM3 Multimode Fibre (MMF)and 100m on OM4 MMF
Low power consumption <3.5W
Operating case temperature 0°C to 70°C
3.3V power supply voltage
RoHS 6 compliant
Hot Pluggable QSFP form factor
MPO connector receptacle
Built-in digital diagnostic function
Applications:

IEEE 802.3bm 100GBASE SR4 and 40GBASE SR4
Proprietary High Speed Interconnections
Data centre

Dell EMC Compatible 100G SR4 (multimode) Transceiver

The QSFP28 SR4 full-duplex optical module offers 4 independent transmit and receive channels, each capable of 26Gbps operation for an aggregate data rate of 104Gbps 70m using OM3 fibre.

The QSFP28 SR4 Transceiver is a Four-Channel, Pluggable, Parallel, Fibre-Optic QSFP28 Module for IEEE 802.3bm, 100GBASE SR4 Applications or 40 Gigabit Ethernet and Infiniband FDR/EDR Applications.

These modules are designed to operate over multimode fibre systems using 850nm VCSEL laser array. An optical fibre ribbon cable with an MPO/MTPTM connector can be plugged into the QSFP module receptacle. QSFP28 SR4 is a parallel transceiver which provides increased port density and total system cost savings.

Features:

Four-channel full-duplex transceiver modules
Transmission data rate up to 26Gbit/s per channel
Up to 70m on OM3 Multimode Fibre (MMF)and 100m on OM4 MMF
Low power consumption <3.5W
Operating case temperature 0°C to 70°C
3.3V power supply voltage
RoHS 6 compliant
Hot Pluggable QSFP form factor
MPO connector receptacle
Built-in digital diagnostic function
Applications:

IEEE 802.3bm 100GBASE SR4 and 40GBASE SR4
Proprietary High Speed Interconnections
Data centre

Extreme Compatible 100G SR4 (multimode) Transceiver

The QSFP28 SR4 full-duplex optical module offers 4 independent transmit and receive channels, each capable of 26Gbps operation for an aggregate data rate of 104Gbps 70m using OM3 fibre.

The QSFP28 SR4 Transceiver is a Four-Channel, Pluggable, Parallel, Fibre-Optic QSFP28 Module for IEEE 802.3bm, 100GBASE SR4 Applications or 40 Gigabit Ethernet and Infiniband FDR/EDR Applications.

These modules are designed to operate over multimode fibre systems using 850nm VCSEL laser array. An optical fibre ribbon cable with an MPO/MTPTM connector can be plugged into the QSFP module receptacle. QSFP28 SR4 is a parallel transceiver which provides increased port density and total system cost savings.

Features:

Four-channel full-duplex transceiver modules
Transmission data rate up to 26Gbit/s per channel
Up to 70m on OM3 Multimode Fibre (MMF)and 100m on OM4 MMF
Low power consumption <3.5W
Operating case temperature 0°C to 70°C
3.3V power supply voltage
RoHS 6 compliant
Hot Pluggable QSFP form factor
MPO connector receptacle
Built-in digital diagnostic function
Applications:

IEEE 802.3bm 100GBASE SR4 and 40GBASE SR4
Proprietary High Speed Interconnections
Data centre

Juniper Compatible 100G SR4 (multimode) Transceiver

The QSFP28 SR4 full-duplex optical module offers 4 independent transmit and receive channels, each capable of 26Gbps operation for an aggregate data rate of 104Gbps 70m using OM3 fibre.

The QSFP28 SR4 Transceiver is a Four-Channel, Pluggable, Parallel, Fibre-Optic QSFP28 Module for IEEE 802.3bm, 100GBASE SR4 Applications or 40 Gigabit Ethernet and Infiniband FDR/EDR Applications.

These modules are designed to operate over multimode fibre systems using 850nm VCSEL laser array. An optical fibre ribbon cable with an MPO/MTPTM connector can be plugged into the QSFP module receptacle. QSFP28 SR4 is a parallel transceiver which provides increased port density and total system cost savings.

Features:

Four-channel full-duplex transceiver modules
Transmission data rate up to 26Gbit/s per channel
Up to 70m on OM3 Multimode Fibre (MMF)and 100m on OM4 MMF
Low power consumption <3.5W
Operating case temperature 0°C to 70°C
3.3V power supply voltage
RoHS 6 compliant
Hot Pluggable QSFP form factor
MPO connector receptacle
Built-in digital diagnostic function
Applications:

IEEE 802.3bm 100GBASE SR4 and 40GBASE SR4
Proprietary High Speed Interconnections
Data centre

Mellanox Compatible 100G SR4 (multimode) Transceiver

The QSFP28 SR4 full-duplex optical module offers 4 independent transmit and receive channels, each capable of 26Gbps operation for an aggregate data rate of 104Gbps 70m using OM3 fibre.

The QSFP28 SR4 Transceiver is a Four-Channel, Pluggable, Parallel, Fibre-Optic QSFP28 Module for IEEE 802.3bm, 100GBASE SR4 Applications or 40 Gigabit Ethernet and Infiniband FDR/EDR Applications.

These modules are designed to operate over multimode fibre systems using 850nm VCSEL laser array. An optical fibre ribbon cable with an MPO/MTPTM connector can be plugged into the QSFP module receptacle. QSFP28 SR4 is a parallel transceiver which provides increased port density and total system cost savings.

Features:

Four-channel full-duplex transceiver modules
Transmission data rate up to 26Gbit/s per channel
Up to 70m on OM3 Multimode Fibre (MMF)and 100m on OM4 MMF
Low power consumption <3.5W
Operating case temperature 0°C to 70°C
3.3V power supply voltage
RoHS 6 compliant
Hot Pluggable QSFP form factor
MPO connector receptacle
Built-in digital diagnostic function
Applications:

IEEE 802.3bm 100GBASE SR4 and 40GBASE SR4
Proprietary High Speed Interconnections
Data centre

Netgear Compatible 100G SR4 (multimode) Transceiver

The QSFP28 SR4 full-duplex optical module offers 4 independent transmit and receive channels, each capable of 26Gbps operation for an aggregate data rate of 104Gbps 70m using OM3 fibre.

The QSFP28 SR4 Transceiver is a Four-Channel, Pluggable, Parallel, Fibre-Optic QSFP28 Module for IEEE 802.3bm, 100GBASE SR4 Applications or 40 Gigabit Ethernet and Infiniband FDR/EDR Applications.

These modules are designed to operate over multimode fibre systems using 850nm VCSEL laser array. An optical fibre ribbon cable with an MPO/MTPTM connector can be plugged into the QSFP module receptacle. QSFP28 SR4 is a parallel transceiver which provides increased port density and total system cost savings.

Features:

Four-channel full-duplex transceiver modules
Transmission data rate up to 26Gbit/s per channel
Up to 70m on OM3 Multimode Fibre (MMF)and 100m on OM4 MMF
Low power consumption <3.5W
Operating case temperature 0°C to 70°C
3.3V power supply voltage
RoHS 6 compliant
Hot Pluggable QSFP form factor
MPO connector receptacle
Built-in digital diagnostic function
Applications:

IEEE 802.3bm 100GBASE SR4 and 40GBASE SR4
Proprietary High Speed Interconnections
Data centre

Palo Alto Compatible 100G SR4 (multimode) Transceiver

The QSFP28 SR4 full-duplex optical module offers 4 independent transmit and receive channels, each capable of 26Gbps operation for an aggregate data rate of 104Gbps 70m using OM3 fibre.

The QSFP28 SR4 Transceiver is a Four-Channel, Pluggable, Parallel, Fibre-Optic QSFP28 Module for IEEE 802.3bm, 100GBASE SR4 Applications or 40 Gigabit Ethernet and Infiniband FDR/EDR Applications.

These modules are designed to operate over multimode fibre systems using 850nm VCSEL laser array. An optical fibre ribbon cable with an MPO/MTPTM connector can be plugged into the QSFP module receptacle. QSFP28 SR4 is a parallel transceiver which provides increased port density and total system cost savings.

Features:

Four-channel full-duplex transceiver modules
Transmission data rate up to 26Gbit/s per channel
Up to 70m on OM3 Multimode Fibre (MMF)and 100m on OM4 MMF
Low power consumption <3.5W
Operating case temperature 0°C to 70°C
3.3V power supply voltage
RoHS 6 compliant
Hot Pluggable QSFP form factor
MPO connector receptacle
Built-in digital diagnostic function
Applications:

IEEE 802.3bm 100GBASE SR4 and 40GBASE SR4
Proprietary High Speed Interconnections
Data centre