APC NetShelter Vertical Cable Organizers

Organize large volumes of cables from networking switches and patch panels in enclosure and rack systems

Comprehensive selection of accessories designed to organize power or data cables within a rack or enclosure.

Includes: Door

Physical Specification

Color: Black
Height: 2.3 cm
Width: 27.2 cm
Depth: 16.3 cm
Net Weight: 0.23 kg
Mounting preference: No preference
Mounting Mode: Not rack-mountable

Cable management accessory to help eliminate cable stress and maintain a neat, organized cable layout within an enclosure or a rack.

Includes : Installation guide

Cable protection - Smooth plastic fingers provide proper bend radius.

Organize large volumes of cables from networking switches and patch panels in enclosure and rack systems

Cable retainer brackets attach to the rear of valueline vertical cable managers and provide a simple, quick to install solution for cable routing and containment.

Includes: Installation guide

Cable separation Attach the cable divider/organizers to the backplate of Vertical Cable Managers and create multiple cable pathways within the cable manager channel.

Installation:  

Organize large volumes of cables from networking switches and patch panels in enclosure and rack systems

Comprehensive selection of accessories designed to organize power or data cables within a rack or enclosure.

Includes: (1) Velcro strap roll, (10) 457 mm hook-and-loop strap, 457mm hook and loop black cable straps, Installation guide

Hook-and-loop Cable Managers:

Secure, bundle, and separate cables
Mount toollessly to the accessory backplate front or rear
Hook-and-loop fastener straps used alone
Installation:

AR7582A Features

Snap-on hinge covers conceal cables for a clean, professional look and easy access.

Includes : Installation guide , Qty 6 - Cable retainers with snap hinges

Clean look - Conceals all vertical cable routing.

Comprehensive selection of accessories designed to organize power or data cables within a rack or enclosure.

Includes: Installation guide

Spools for Vertical Fiber Organizer:

CableCapacity: 288 FiberCables
Four plastic spools for fiber management
Toollessly mount to the vertical accessory channel
Attach with screws to the mounting rails of 750mm wide enclosures (Excludes AR3140, AR3340, AR3347)
Installation:

Organize large volumes of cables from networking switches and patch panels in enclosure and rack systems

Comprehensive selection of accessories designed to organize power or data cables within a rack or enclosure.

Includes: Door

Physical Specifications

Color: Black
Height: 83.50 in (212.1 cm)
Width: 5.91 in (15 cm)
Depth: 1.50 in (3.8 cm)
Net Weight: 5.31 lb(US) (2.41 kg)
Mounting preference: No preference
Mounting Mode: Not rack-mountable

Deep cable management rings facilitate vertical cable management in typical networking environments.

Includes : Installation Guide , Mounting hardware

Organize large volumes of cables from networking switches and patch panels in enclosure and rack systems

Comprehensive selection of accessories designed to organize power or data cables within a rack or enclosure.

Includes: Door

Physical Specification

Color: Black
Height: 238.8 cm
Width: 15 cm
Depth: 3.8 cm
Net Weight: 2.73 kg
Mounting preference: No preference
Mounting Mode: Not rack-mountable

Organize large volumes of cables from networking switches and patch panels in enclosure and rack systems

Cable Fall (radius drop) provides a proper bend radius for cabling routed into/out of enclosures or overhead cable management systems. Cable fall attaches in multiple locations including the enclosure roof holes, open frame rack sides, vertical cable manager openings and rungs of overhead cable ladder systems. Secure cabling in place using slots in the accessory and hook-and-loop fasteners straps (AR8621 not provided).

Includes: (2) Cable radius drop, Installation guide, Mounting hardware

Flexible design for a variety of applications The cable fall is designed to install in multiple locations where cable is routed throughout the datacenter environment.

Features: Provides a proper bend radius for cabling routed into/out of enclosures or overhead cable management systems
Attaches in multiple locations including the enclosure roof holes, open frame rack sides, vertical cable manager openings and rungs of overhead cable ladder systems
Secure cabling in place using hook-and-loop fasteners straps (AR8621 not provided)
Installation:

Comprehensive selection of accessories designed to organize power or data cables within a rack or enclosure.

Includes : Installation guide , Mounting hardware

Mounting provisions for vertical power distribution - Mount up to four vertical rack PDUs on one side

Organize large volumes of cables from networking switches and patch panels in enclosure and rack systems

Comprehensive selection of accessories designed to organize power or data cables within a rack or enclosure.

Includes: Door

Physical Specification

Color: Black
Height: 212.1 cm
Width: 29.7 cm
Depth: 3.8 cm
Net Weight: 4.05 kg
Mounting preference: No preference
Mounting Mode: Not rack-mountable

Snap-on hinge covers conceal cables for a clean, professional look and easy access.

Includes : Installation guide

Cable management accessory to help eliminate cable stress and maintain a neat, organized cable layout within an enclosure or a rack.

Includes : Installation guide

Cable protection - Smooth plastic fingers provide proper bend radius.

Cable management accessory to help eliminate cable stress and maintain a neat, organized cable layout within an enclosure or a rack.

Includes : Installation Guide , Mounting hardware

2 piece cable management sections with smooth plastic fingers at 1U increments to allow patch cords to enter and exit in an organized manner.

Includes : Installation guide , Mounting hardware

High capacity cable finger design - Cable managers feature high capacity slim cable fingers to provide maximum capacity at every rackspace unit and a rigid design to decrease deflection when cables are routed in/out of the cable manager channel.

Organize large volumes of cables from networking switches and patch panels in enclosure and rack systems

Snap-on hinge covers conceal cables for a clean, professional look and easy access.

Includes: Installation guide

Hinged covers:

Conceal all vertical cable routing
Open left and right
Snap hinges provide trouble-free access to cables
Installation:



 

The vertical channels have smooth plastic fingers at 1U increments to allow patch cords to enter and exit in an organized manner.

Includes : Installation guide , Mounting hardware , Qty 6 - Cable retainers with snap hinges , Top securing bracket

Backplate optimized for accessorizing - Backplates feature multiple holes for toollessly mounting accessories such as cable managers for cable tie-off (AR8621) and airflow management brush strips (AR7714) to allow cable pass-through while restricting airflow through the openings.
Dedicated cable manager for each enclosure height - Dedicated cable managers for each enclosure height 42U, 45U, and 48U, provide the maximum u-space coverage. Optional covers will match cable manager height to provide full coverage over the entire height of the enclosure.
High capacity cable finger design - Cable managers feature high capacity slim cable fingers to provide maximum capacity at every rackspace unit and a rigid design to decrease deflection when cables are routed in/out of the cable manager channel.
Optional hinging left or right covers - Covers (not provided) install quickly without tools and include two easy to use latches that allow the cover to open to the left or right. The covers hide the cabling to keep the enclosure space neat for future maintenance and an clean aesthetic.
Secure cabling with easy access - Secure cabling inside the cable manager with the provided snap hinge cable retainers that open to the left or right for easy access.

Organize large volumes of cables from networking switches and patch panels in enclosure and rack systems

Comprehensive selection of accessories designed to organize power or data cables within a rack or enclosure.

Includes: Door

Physical Specification

Color: Black
Height: 238.8 cm
Width: 29.7 cm
Depth: 3.8 cm
Net Weight: 4.55 kg
Mounting preference: No preference
Mounting Mode: Not rack-mountable

The vertical channels have smooth plastic fingers at 1U increments to allow patch cords to enter and exit in an organized manner.

Includes : Installation guide , Mounting hardware , Qty 6 - Cable retainers with snap hinges

Backplate optimized for accessorizing - Backplates feature multiple holes for toollessly mounting accessories such as cable managers for cable tie-off (AR8621) and airflow management brush strips (AR7714) to allow cable pass-through while restricting airflow through the openings.
Dedicated cable manager for each enclosure height - Dedicated cable managers for each enclosure height 42U, 45U, and 48U, provide the maximum u-space coverage. Optional covers will match cable manager height to provide full coverage over the entire height of the enclosure.
High capacity cable finger design - Cable managers feature high capacity slim cable fingers to provide maximum capacity at every rackspace unit and a rigid design to decrease deflection when cables are routed in/out of the cable manager channel.
Optional hinging left or right covers - Covers (not provided) install quickly without tools and include two easy to use latches that allow the cover to open to the left or right. The covers hide the cabling to keep the enclosure space neat for future maintenance and an clean aesthetic.
Secure cabling with easy access - Secure cabling inside the cable manager with the provided snap hinge cable retainers that open to the left or right for easy access.

Comprehensive selection of accessories designed to organize power or data cables within a rack or enclosure.

Includes : Installation Guide

Mounting provisions for vertical power distribution - Mount up to four vertical rack PDUs on one side.
Quick release tabs - Insert or remove the device with ease.

Organize large volumes of cables from networking switches and patch panels in enclosure and rack systems

Cable management accessory to help eliminate cable stress and maintain a neat, organized cable layout within an enclosure or a rack.

Includes: (2) Vertical cable organizers, Installation guide

Vertical Cable Manager: Cable Capacity: 40 Cat 6a , 50 Cat 6
Mount toollessly on the rear accessory channel
Occupies two bays of the accessory channel
Adjust to one bay for side-by-side Rack PDU installation
High capacity cable finger design

Cable managers feature high capacity slim cable fingers to provide maximum capacity at every rack space unit and a rigid design to decrease deflection when cables are routed in/out of the cable manager channel.

Vertical Mounting Capabilities

Easily mounts vertically in racks or enclosures and occupies zero U of valuable rack space, which allows more equipment in the rack. Units that mount vertically are optimized to fit in a NetShelter enclosures.


Installation:  

Cable management accessory to help eliminate cable stress and maintain a neat, organized cable layout within an enclosure or a rack.

Includes : Installation Guide , Mounting hardware

AR7589 Features

Hinged Covers for NetShelter SX 750mm Wide 48U Vertical Cable Manager (Qty 2)

Snap-on hinge covers conceal cables for a clean, professional look and easy access.

Includes : Installation guide

Occupies one bay of rear Zero U channel.

Includes : Installation Guide , Qty 2 - Vertical Cable Organizers

This vertical fibre panel is designed to organise power or data cables within a rack or enclosure. Features:

Expanded cable management
Occupies 0 U of rack space
Rear/vertical cable management
Tool-less mounting

Cable management accessory to help eliminate cable stress and maintain a neat, organized cable layout within an enclosure or a rack.

Includes:
Installation guide
Qty 2 - Vertical Cable Organizers
Features
High capacity cable finger design - Cable managers feature high capacity slim cable fingers to provide maximum capacity at every rack space unit and a rigid design to decrease deflection when cables are routed in/out of the cable manager channel.
Vertical Mounting Capabilities - Easily mounts vertically in racks or enclosures and occupies zero U of valuable rack space, which allows more equipment in the rack. Units that mount vertically are optimized to fit in a NetShelter enclosures.

Cable management accessory to facilitate rear cable management within an enclosure or a rack. Helps to eliminate cable stress and maintain a neat, organized cable layout. Works in both 42U and 48U racks.

This product is intended for NetShelter SX.

Includes : Installation Guide

Organize large volumes of cables from networking switches and patch panels in enclosure and rack systems

2 piece cable management sections with smooth plastic fingers at 1U increments to allow patch cords to enter and exit in an organized manner.

Includes: Installation guide, Mounting hardware

Installation:  

Organize large volumes of cables from networking switches and patch panels in enclosure and rack systems

This 6” wide, high capacity vertical cable manager for 2 and 4 Post open frame racks features a single-sided cable channel with multiple internal cable tie-off locations and smooth plastic fingers at 1U increments for organized patching applications.

Includes: Door, Installation guide, Mounting hardware

Cable management tie-off backplate for accessories

Backplates feature multiple mounting holes for toolless accessory installation of cable management accessories such as hook-and-loop cable managers and straps (AR8621) and fiber spools for excess fiber slack management (AR8444).

Cable protection

Smooth plastic fingers provide proper bend radius.

Dual-hinging full length door

Door installs quickly without tools and hinges from the left or right to allow access inside the vertical cable manager channel.

Fiber management

Supports toolless installation of AR8444 fiber spools.

High capacity cable finger design

Cable managers feature high capacity slim cable fingers to provide maximum capacity at every rack space unit and a rigid design to decrease deflection when cables are routed in/out of the cable manager channel.

Horizontal cable routing front-to-back

Pass-through holes and mounting slots support horizontal cable troughs for front-to-back cable pass-through using cable management accessory AR8016ABLK.

Unassembled for rapid assembly onsite

Vertical cable managers are packaged unassembled and designed with a simple snap together design for rapid onsite assembly and installation.

Organize large volumes of cables from networking switches and patch panels in enclosure and rack systems

The vertical channels have smooth plastic fingers at 1U increments to allow patch cords to enter and exit in an organized manner.

Includes: (6) Cable retainers with snap hinges, Installation guide, Mounting hardware, Top securing bracket

Today’s high-density sever and networking applications demand a rack infrastructure that can mount a mix of different equipment and support high-capacity cable management in an efficient, flexible design.

Backplate optimized for accessorizing

Backplates feature multiple holes for toollessly mounting accessories such as cable managers for cable tie-off (AR8621) and airflow management brush strips (AR7714) to allow cable pass-through while restricting airflow through the openings.

Dedicated cable manager for each enclosure height

Dedicated cable managers for each enclosure height 42U, 45U, and 48U, provide the maximum u-space coverage. Optional covers will match cable manager height to provide full coverage over the entire height of the enclosure.

High capacity cable finger design

Cable managers feature high capacity slim cable fingers to provide maximum capacity at every rack space unit and a rigid design to decrease deflection when cables are routed in/out of the cable manager channel.

Optional hinging left or right covers

Covers (not provided) install quickly without tools and include two easy to use latches that allow the cover to open to the left or right. The covers hide the cabling to keep the enclosure space neat for future maintenance and an clean aesthetic.

Secure cabling with easy access

Secure cabling inside the cable manager with the provided snap hinge cable retainers that open to the left or right for easy access.

Organize large volumes of cables from networking switches and patch panels in enclosure and rack systems

This 6” wide, high capacity vertical cable manager for 2 and 4 Post open frame racks features a single-sided cable channel with multiple internal cable tie-off locations and smooth plastic fingers at 1U increments for organized patching applications.

Includes: Door, Installation guide, Mounting hardware

Cable management tie-off backplate for accessories

Backplates feature multiple mounting holes for toolless accessory installation of cable management accessories such as hook-and-loop cable managers and straps (AR8621) and fiber spools for excess fiber slack management (AR8444).

Cable protection

Smooth plastic fingers provide proper bend radius.

Dual-hinging full length door

Door installs quickly without tools and hinges from the left or right to allow access inside the vertical cable manager channel.

Fiber management

Supports toolless installation of AR8444 fiber spools.

High capacity cable finger design

Cable managers feature high capacity slim cable fingers to provide maximum capacity at every rack space unit and a rigid design to decrease deflection when cables are routed in/out of the cable manager channel.

Horizontal cable routing front-to-back

Pass-through holes and mounting slots support horizontal cable troughs for front-to-back cable pass-through using cable management accessory AR8016ABLK.

Unassembled for rapid assembly onsite

Vertical cable managers are packaged unassembled and designed with a simple snap together design for rapid onsite assembly and installation.

Organize large volumes of cables from networking switches and patch panels in enclosure and rack systems

This 6” wide, high capacity vertical cable manager for 2 and 4 Post open frame racks features a single-sided cable channel with multiple internal cable tie-off locations and smooth plastic fingers at 1U increments for organized patching applications.

Includes: Door, Installation guide, Mounting hardware

Cable management tie-off backplate for accessories

Backplates feature multiple mounting holes for toolless accessory installation of cable management accessories such as hook-and-loop cable managers and straps (AR8621) and fiber spools for excess fiber slack management (AR8444).

Cable protection

Smooth plastic fingers provide proper bend radius.

Dual-hinging full length door

Door installs quickly without tools and hinges from the left or right to allow access inside the vertical cable manager channel.

Fiber management

Supports toolless installation of AR8444 fiber spools.

High capacity cable finger design

Cable managers feature high capacity slim cable fingers to provide maximum capacity at every rack space unit and a rigid design to decrease deflection when cables are routed in/out of the cable manager channel.

Horizontal cable routing front-to-back

Pass-through holes and mounting slots support horizontal cable troughs for front-to-back cable pass-through using cable management accessory AR8016ABLK.

Unassembled for rapid assembly onsite

Vertical cable managers are packaged unassembled and designed with a simple snap together design for rapid onsite assembly and installation.

Organize large volumes of cables from networking switches and patch panels in enclosure and rack systems

This 12” wide, high capacity vertical cable manager for 2 and 4 Post open frame racks features a single-sided cable channel with multiple internal cable tie-off locations and smooth plastic fingers at 1U increments for organized patching applications.

Includes: Door, Installation guide, Mounting hardware

Cable management tie-off backplate for accessories

Backplates feature multiple mounting holes for toolless accessory installation of cable management accessories such as hook-and-loop cable managers and straps (AR8621) and fiber spools for excess fiber slack management (AR8444).

Cable protection

Smooth plastic fingers provide proper bend radius.

Dual-hinging full length door

Door installs quickly without tools and hinges from the left or right to allow access inside the vertical cable manager channel.

Fiber management

Supports toolless installation of AR8444 fiber spools.

High capacity cable finger design

Cable managers feature high capacity slim cable fingers to provide maximum capacity at every rack space unit and a rigid design to decrease deflection when cables are routed in/out of the cable manager channel.

Unassembled for rapid assembly onsite

Vertical cable managers are packaged unassembled and designed with a simple snap together design for rapid onsite assembly and installation.

Features: Fits two and four post open frame racks
84 in (2133mm) height, Single-sided cable channel in 12-in wide options
Full length door assembles onsite and snaps in place and door opens to left or right
New, best-in-class, high capacity cable finger design with smooth radius fingers at 1U increments for superior cable protection
Cable management backplate for toollessly mounting cable management accessories within the vertical cable manager space
Ships disassembled for assembly at end user site
Installation:

Organize large volumes of cables from networking switches and patch panels in enclosure and rack systems

This 12” wide, vertical cable manager for 2 and 4 Post open frame racks ships unassembled for rapid onsite assembly and features a full height dual hinging door and single-sided cable channel with multiple internal cable tie-off locations and smooth plastic fingers at 1U increments for organized patching applications.

Includes: Door, Installation guide, Mounting hardware

Cable management tie-off backplate for accessories

Backplates feature multiple mounting holes for toolless accessory installation of cable management accessories such as hook-and-loop cable managers and straps (AR8621) and fiber spools for excess fiber slack management (AR8444).

Cable protection

Smooth plastic fingers provide proper bend radius.

Dual-hinging full length door

Door installs quickly without tools and hinges from the left or right to allow access inside the vertical cable manager channel.

Fiber management

Supports toolless installation of AR8444 fiber spools.

High capacity cable finger design

Cable managers feature high capacity slim cable fingers to provide maximum capacity at every rack space unit and a rigid design to decrease deflection when cables are routed in/out of the cable manager channel.

Horizontal cable routing front-to-back

Pass-through holes and mounting slots support horizontal cable troughs for front-to-back cable pass-through using cable management accessory AR8016ABLK.

Unassembled for rapid assembly onsite

Vertical cable managers are packaged unassembled and designed with a simple snap together design for rapid onsite assembly and installation.

Features:

Fits two and four post open frame racks
84 in (2133mm) height, Single-sided cable channel in 12-in wide options
Full length door assembles onsite and snaps in place and door opens to left or right
New, best-in-class, high capacity cable finger design with smooth radius fingers at 1U increments for superior cable protection
Cable management backplate for toollessly mounting cable management accessories within the vertical cable manager space
Ships disassembled for assembly at end user site
Installation:

Organize large volumes of cables from networking switches and patch panels in enclosure and rack systems

This 6” wide, high capacity vertical cable manager for 2 and 4 Post open frame racks features a double-sided cable channel with multiple internal cable tie-off locations and smooth plastic fingers at 1U increments for organized patching applications.

Includes: (3) Midspan brackets, Doors, Installation guide, Mounting hardware

Cable protection

Smooth plastic fingers provide proper bend radius.

Grounding connection

Grounding connection point (hardware not provided) on left and right side of cable channel provides location for grounding the vertical cable manager.

High capacity cable finger design

Cable managers feature high capacity slim cable fingers to provide maximum capacity at every rack space unit and a rigid design to decrease deflection when cables are routed in/out of the cable manager channel.

Horizontal cable routing front-to-back

Pass-through holes and mounting slots support horizontal cable troughs for front-to-back cable pass-through using cable management accessory AR8016ABLK.

Similar look-and-feel to NetShelterT enclosures

Contoured and powdercoat design of the vertical cable manager door and matching enclosure placard provide a clean and consistent look with NetShelter enclosures.

Slam-to-latch full length door

Door installs quickly without tools and is provided with two easy to use latches that allow the door to open to the left or right.

Toollessly mount vertical Rack PDUs

Backplates feature several mounting location positions allowing Rack PDUs to be toollessly installed with the vertical cable manager channel or on the backside.

Vertical cable managers ship fully assembled

Vertical cable managers ship fully assembled reducing the amount of time required to install equipment.

Features: Fits two and four post open frame racks
Similar look-and-feel to NetShelter™ enclosures
84” H, Single and Double-sided cable channel in 6-in wide
Slam to latch full length door opens to left or right
New, best-in-class, high capacity cable finger design with smooth radius fingers at 1U increments for superior cable protection
Cable management midspan bracket (double-sided models) for toolless accessory installation and division of interior cable management space for deeper or shallower channel space
Ships fully assembled
Installation: