16 Port PoE Switches

The Zyxel XMG1915-18EP is a high-performance Smart Switch designed for optimal networking in small to medium-sized businesses. With 16 ports supporting rapid 2.5 Gigabit Ethernet (2.5GbE) speeds half are supplied with PoE++ and an additional 2 ports featuring 10 Gigabit SFP+ connectivity, this switch is tailored to meet the escalating demand for high-speed data transfer.

XMG1915 Series Features

2.5G Multi-Gig Speeds: Each Ethernet port on the switches supports 2.5G speed, providing a high-performance network.
10G SFP+ Ports: Equipped with 10G SFP+ ports to meet the increasing need for high network speeds in business environments.
PoE Connectivity: Available in models with and without Power over Ethernet (PoE) connectivity, offering flexibility in powering connected devices.
NebulaFlex Compatibility: Designed to support NebulaFlex, providing an affordable Multi-Gig hybrid switch solution.
SB/SMB Market Focus: Tailored for the small and medium-sized business (SB/SMB) market, addressing the networking needs of these specific segments.
User-Friendly Web GUI: Configuration can be done through a user-friendly Web Graphical User Interface (GUI), simplifying the setup process.
Cloud-Based Unified Management: Integration with the Nebula Control Center for cloud-based unified management, allowing businesses to manage their network infrastructure efficiently.
Configurational Flexibility: Users can choose between local Web GUI setup or cloud-based Nebula Control Center, providing flexibility in configuration based on user preferences.
Cost-Effective Solution: Ensures that the network can handle rapid data growth without breaking the bank, offering a cost-effective networking solution.
XMG1915-10E Specifications

VLAN Support
Switch Layer: L2
Power Source: AC
Quality of Service (QoS) Support
Data Transmission: Switching Capacity - 120 Gbit/s, MAC Address Table - 16000 entries, Jumbo Frames - 12000, Forwarding Rate - 89.2 Mpps
Multicast Support
Security: SSH/SSL Support, SNMP Security Algorithms: SNMPv2, SNMPv3, MAC Address Filtering, Authentication Type - RADIUS, DHCP Features - DHCP client, DHCP relay, DHCP snooping
Power: Power Consumption (Max) - 13.13 W, Power Supply Included, AC Input Voltage - 100 - 240 V, AC Input Frequency - 50/60 Hz
Virtual LAN Features: MAC Address-based VLAN, Port-based VLAN, Voice VLAN
Performance: Packet Buffer Memory - 1.5 MB, MTBF - 646.958 h, Internal Memory - 256 MB, Flash Memory - 32 MB
Networking Standards: IEEE 802.1p, IEEE 802.3ab, IEEE 802.3ae, IEEE 802.3at, IEEE 802.3az, IEEE 802.3bt, IEEE 802.3bz, IEEE 802.3x, IEEE 802.3z
Memory: Packet Buffer Memory - 1.5 MB, Internal Memory - 256 MB, Flash Memory - 32 MB
PoE:On 8 of the 16 RJ-45 Ports
Ports: SFP+ Module Slots - 2, Basic RJ-45 Ethernet Ports - 16 (Type: 8x 2.5G Ethernet 8x 2.5G Ethernet with PoE++)
Multicast Features: Multicast Forwarding
Design: LED Indicators, Rack Mounting
Weight & Dimensions: Width - 330 mm, Depth - 230 mm, Height - 44 mm, Weight - 2.6Kg
*For complete specifications see the documentation tab above

Cisco's C1200-16P-2G is a high-performance managed switch designed for seamless network connectivity, featuring 16 PoE+ Gigabit ports and 2 SFP slots for versatile connections. With Layer 3 support, this switch empowers efficient data routing, making it an ideal choice for businesses requiring robust and scalable network solutions.

Series Features

Get 8 to 48 ports of Gigabit Ethernet connectivity, GE or 10-GE uplinks, and PoE+ support
Plug and play with existing voice, wireless, data, video, and connected networking devices
Provide additional fiber connectivity for higher uplink bandwidth and expanded options with more PoE power budget.
Integrated security helps to prevent unauthorized access and protects your business data.
C1200-16P-2G Specifications

Network Ports: 16 x 1G
Uplink Ports: 2 x 1G SFP combo
Power over Ethernet: PoE+ (120W)
Fan: Fanless
Power Supply: Internal
Features: Layer 2 switching
VLAN support
Spanning Tree Protocol (STP)
Access Control List (ACL)
Quality of Service (QoS)
IPv4/IPv6 static routing

Network Management:
On-device UI, Cisco Business Dashboard and mobile app
Warranty: Limited lifetime warranty
Unboxing Video

TP-Link’s new TL-SG1218MPE PoE switch with all 16 ports supporting the PoE+ standard provides a simple way to expand the wired network while transferring power over the same ethernet cable at the same time. With a total power budget of 192W, up to 30W per port, and the powerful PoE Module, TL-SG1218MPE can power more high-powered devices such as Access Points, IP Cameras, IP Phones. Moreover, TL-SG1218MPE can provide 802.1q VLAN, IGMP Snooping, LAG and other software functions to meet various network configuration needs

Highlights

16 PoE+ 10/100/1000Mbps RJ45 ports, 2 Gigabit SFP slots
High PoE power budget with up to 30W for each PoE port and 192W for all PoE ports
Advanced Features for higher performance like 802.1Q VLAN, 802.1p QoS and IGMP Snooping.
Intelligent power management module like PoE Schedule, PoE Priority, PoE Power Limit.
Ideal for Surveillance TL-SG1218MPE complies with the 802.3af/at PoE+ standard, supporting up to 30W power supply on each PoE port. The total high PoE power budget is up to 192W for the 16 PoE ports, making it ideal for small to medium business surveillance systems.



Transferring Data and Power for Access Points

Ceiling Mount APs Outdoor APs Wall Plate APs Easy To Use

Intelligent Power Management When total power consumption excels 192W, the intelligent power management will cut the lower priority port power off to ensure the high priority port’s power supply and protect the device from power overload operation.




Administrators can designate the priority of traffic based on QoS, for example, to ensure that voice and video applications remain clear and lag-free.

IGMP Snooping optimises multimedia traffic delivery to ensure a better network experience especially for applications like IPTV.



Making Management Easy TL-SG1218MPE offers network monitoring for users to observe traffic behavior. Through its web-based user interface and management utility, the TL-SG1218MPE offers a variety of useful features, including network monitoring, traffic prioritisation, and enhanced QoS.

Management Utility

User Interface

EdgeSwitch XP delivers reliable passive PoE and fast 10/100/1000 Mbps connectivity to attached Ubiquiti devices and other devices that support passive PoE. Features

(16) GbE RJ45 ports
300W total PoE availability
Rack-mountable, 1U
Specifications

Mechanical

Hardware Configuration: (2) 8-Port EdgeSwitch 8XP Devices
Dimensions: 480 x 44.5 x 186 mm (18.9 x 1.75 x 7.32")
Weight: 3.95 kg (8.71 lb)
Mounting: 19" 1U Rack-Mount
Hardware*

* Specifications apply to each 8-Port EdgeSwitch ES-8XP unit.

Management Interface: (1) 10/100 Ethernet Port
Networking Interfaces: (8) 10/100/1000 Ethernet Ports
Processor: MIPS 24K, 400 MHz
System Memory: 64 MB
Code Storage: 8 MB
Power Input: 100-240VAC
Max. Power Consumption: 150W
USB Port: 2.0 Type A (Reserved for Future Use)
Operating Humidity: 90% Noncondensing
Operating Temperature: -25 to 55° C(-13 to 131° F)

Cisco C1300-16P-2G 16 is a high-performance Managed Switch, equipped with 16 Gigabit ports and 2x SFP slots for flexible connectivity. Experience seamless data routing and advanced management capabilities with Layer 3 support, ensuring a reliable and efficient network infrastructure.

Series Features

Use the intuitive dashboard to automate the deployment, monitoring, and lifecycle management of your switches.
Pervasive security helps to safeguard your network and the privacy of your customers.
Gigabit, multigigabit, and 10G ports and wire-speed performance provide a solid foundation for SMB networks.
Get true stacking of up to four switches, all functioning as a single device with unified management and control.
C1300-16P-2G Specifications

Network Ports: 16 x 1G
Uplink Ports: 2 x 1G SFP
Power over Ethernet: PoE+ (120W)
Stacking: N/A
Fan: Fanless
Power Supply: Internal
Features: Layer 2 switching
VLAN support
Spanning Tree Protocol (STP)
Advanced threat protection
IPv6 first-hop security
Quality of service (QoS)
sFlow monitoring
Dynamic routing

Network Management:
Cisco Business Dashboard and mobile app; on-device UI, CLI, and SNMP
Warranty: Enhanced Limited lifetime warranty
Unboxing Video

Product Features 16 PoE+ 10/100Mbps RJ45 ports, 2 Gigabit RJ45 ports and 2 combo Gigabit SFP slots

Up to 250m data and power transmission under extend mode specially designed for surveillance system

Priority mode for port1-8 to guarantees the quality of sensitive applications like video monitor

High PoE power budget with up to 30W for each PoE port and 192W for all PoE ports

Easy to use, with no configuration and installation needed

Cisco's C1300-16FP-2G is a high-performance Managed Switch, boasting 16 Gigabit ports and 2 SFP slots to ensure seamless connectivity. With advanced Layer 3 support, this switch delivers robust network management, making it an ideal choice for optimizing your business infrastructure with Cisco's trusted performance and reliability.

Series Features

Use the intuitive dashboard to automate the deployment, monitoring, and lifecycle management of your switches.
Pervasive security helps to safeguard your network and the privacy of your customers.
Gigabit, multigigabit, and 10G ports and wire-speed performance provide a solid foundation for SMB networks.
Get true stacking of up to four switches, all functioning as a single device with unified management and control.
C1300-16FP-2G Specifications

Network Ports: 16 x 1G
Uplink Ports: 2 x 1G SFP
Power over Ethernet: PoE+ (240W)
Stacking: N/A
Fan: Fanless
Power Supply: Internal
Features: Layer 2 switching
VLAN support
Spanning Tree Protocol (STP)
Advanced threat protection
IPv6 first-hop security
Quality of service (QoS)
sFlow monitoring
Dynamic routing

Network Management:
Cisco Business Dashboard and mobile app; on-device UI, CLI, and SNMP
Warranty: Enhanced Limited lifetime warranty
Unboxing Video

The world’s only 1G, 10G and 40G stackable platform designed for server and audiovisual installations, converged access layer and dependable core in SMB environments. M4300 stacking topologies deliver 384-port 1G, 768-port 10G, 192-port 40G, or a combination in redundant, unstoppable systems for edge to core connectivity.

The NETGEAR M4300 Stackable Switch Series delivers L2/L3/L4 and IPv4/IPv6 cost-effective services for mid-enterprise edge with full PoE+ and SMB core deployments with unrivalled ease of use: 10 Gigabit models can seamlessly stack with 1 Gigabit models within the series, enabling spine and leaf line-rate stacking topologies.

Non-stop forwarding (NSF) virtual chassis architectures provide advanced High Availability (HA) with hitless failover across the stack. Dual redundant, modular power supplies equipping full width models contribute to business continuity management. Layer 3 feature set includes static, dynamic and policy-based routing - as standard. The NETGEAR M4300 Switch Series is perfect for wireless access, unified communications and professional AV-over-IP installations.

High Availability (HA)

Non-stop forwarding (NSF) virtual chassis architectures with hitless failover across the stack

Link Dependency

Enables or disables ports based on link state of different ports

Multi-Resiliency

Stacking and distributed link aggregation allow for zero downtime and load balancing capabilities

Advanced IPv4/IPv6 security

Malicious code detection, DHCP Snooping, IP Source Guard protection and DoS attacks mitigation

PVST+ Interoperability

Per VLAN Spanning Tree and Per VLAN Rapid Spanning Tree (PVSTP/PVRSTP)

600W PSU

Ships with 600W PSU APS600W installed

All (16) 10G/Multi-gig ports can provide 30W of PoE+ power (500W budget)

Also available with smaller 299W PSU APS299W

16 Port Netgear GS116LP Prosafe 10/100/1000 Desktop Switch With 76W PoE The NETGEAR GS116LP ProSAFE FlexPoE Gigabit Unmanaged Switch helps businesses cost-effectively increase power budget to expand their network. Powered by the industry's first flexible PoE+ integrated technology, you can increase or decrease the PoE budget by simply buying a new power supply, effectively future-proofing small business networks and budgets. All ports support PoE/PoE+ that makes them the perfect switches for deploying Wireless APs, Pan/Tilt/Zoom and fixed IP Cameras, VoIP Phones, access-limited security door locks or any other IoT PoE-powered devices.

The GS116LP Gigabit Ethernet switch come with 16 Gigabit copper ports in a desktop metal case. The small form factor combined with the rack-mount and wall-mount accessories give you the flexibility to place this switch in small cabinets, in a 19" rack, on a wall or on your desk.

Main Features

Sixteen (16) x Gigabit Copper Ports (all support 802.3af PoE / 802.3at PoE+)
32Gbps Bandwidth
Fanless design for silent operation
PoE Max Power Per Port: Up to 15.4w for 802.3af and 30W for 802.3at
Desktop, Wall-mount and 19-inch Rackmountable
Small Form Factor
  PoE+ Support

Power-Over-Ethernet (PoE) for powering IP Security Cameras, VoIP phones, wireless access points, and other Ethernet-powered devices.

Sixteen (16) PoE+ ports (up to 30W per port) allow for the connection of up to 16 PoE/PoE+ (802.3af and 802.3at) devices (up to a total PoE power budget of 76W). PoE ports may also be used for non-PoE devices.

The flexible mounting system gives you the flexibility to place the GS116PP in a desktop environment, mounted in a rack (accessories included) or wall-mounted

Key Highlights

All ports Support PoE+

All ports supports PoE+ and PoE being able to provide up to 30W per port to any power-hungry device (PTZ Cameras, PoE Lights, PD Switches, Access Points)

Flexible PoE Budget

Interchangeable External Power Supply. Increase or decrease your PoE Budget as needed

Flexible mounting options

Adapts to your needs and configuration and configuration in any environment. Rackmount, wall or desktop mounting options

Silent Design

Small form factor and silent for quiet operation makes it the ideal switch for noise-sensitive environments.

High quality components and Energy Efficiency

Unmanaged Gigabit switches are built with Top Quality components to assure a long life. Unmanaged switches are built to last, and rigorously tested to provide the reliability businesses need.

NETGEAR Unmanaged Switches also support the latest Energy Efficient Ethernet (IEEE 802.3az) standard, which reduces energy consumption when there is light traffic on an active ports or when there is no link or no activity detected. It can further save energy when a short cable is used.

NETGEAR Warranty

This product is backed by a NETGEAR ProSAFE Limited Lifetime Hardware Warranty.

Lifetime Next Business Day Hardware Replacement.

ProSUPPORT 24x7 Advanced Technical Support via phone for 90 days (Remote diagnostics performed by our technical experts for prompt resolution of technical issues). ProSUPPORT coverage can be extended by purchasing one, three, or five year contracts.

ProSUPPORT Lifetime 24x7 Advanced Technical Support via chat. (Remote diagnostics performed by our technical experts for prompt resolution of technical issues).

The NETGEAR M4250 Switch Series introduces the AV Line, developed and engineered for audio/video professionals with dedicated service and support. M4250 has been built from the ground up for the growing AV over IP market, combining years of networking expertise in AV with M4300 and M4500 series with best practices from leading experts in the professional AV market. AV codecs generally use 1Gbps or 10Gbps per stream and the AV Line of M4250 targets the widespread 1Gbps codecs.

PoE+, Ultra90 PoE++ and rear-facing ports ensure a clean integration in AV racks. M4250 switches come pre-configured for standard audio and video signals. When requirements are more specific, an AV user interface offers customization with port-based profiles. For audio Dante, Q-SYS and AES67 profiles are available, as well as an AVB profile requiring an AVB license sold separately. For video the M4250 offers profiles for NVX, SVSI, Q-SYS, NDI, Dante etc. as well as audio/ video/control mixed profiles. When multiple switches, NETGEAR IGMP Plus™ brings automation for you to just connect them together, or with M4300 and M4500 switches

Key Features

Dedicated AV web-based GUI interface for more specific AV installations
Color-based AV profiles can be applied to the different ports
Dante, Q-SYS, AES67 and AVB audio profiles
AVB requires an AVB4212P-10000S license (sold separately)
NVX, SVSI, Q-SYS, NDI and Dante video profiles
Audio / video / control mixed profiles
Automatic switch interconnect with NETGEAR IGMP Plus
Common Layer 2 and Layer 3 switching engine across all M4250 models
Built-in IT web GUI, console, telnet and SSH consistent with other NETGEAR M4xxx series
Feature set includes static, RIP and PIM routing, DHCP Server and PTPv2

A wall-mountable, 16-port, Layer 2 PoE switch with a fanless cooling system.

The UniFi Switch Lite 16 PoE is a fully managed Layer 2 switch with sixteen Gigabit Ethernet ports for your RJ45 Ethernet devices. Eight ports also offer auto-sensing 802.3at PoE+ that provide up to a total PoE wattage of 45W for UniFi Access Points or other PoE devices. Managed and configured by the UniFi Network Controller with UniFi mobile app support, the UniFi Switch Lite 16 PoE offers Layer 2 switching protocols and features. The UniFi Network Controller and mobile app allow admins to configure and monitor virtually all of the switch features in a graphical user interface from anywhere.

Product Features

(8) GbE PoE+, (8) GbE ports
45W total PoE availability
Wall mountable
Ubiquiti Extended Warranty

Ubiquiti currently offers 1 year standard manufacturer warranty on equipment purchased through official UK distributors.

In the unlikely event that you have any issues with your Ubiquiti product within the 1 year of manufacturer warranty, please contact your account manager in the first instance. Our technical team will do everything they can to find a resolution to your problem. If a fix cannot be provided, then an RMA will need to be registered via the Ubiquiti Reseller Portal.

On all purchases made through Comms Express, we offer our customers options to upgrade the standard manufacturer warranty to a 3 or 5 year advanced hardware replacement.

Available warranty options:

 

16 Port Netgear GS116PP Prosafe 10/100/1000 Desktop Switch With 183W PoE The NETGEAR Gigabit Unmanaged GS116PP Switch helps businesses cost-effectively expand their network to Gigabit speeds and higher port counts. These unmanaged Gigabit switches are a desktop, wall mount and rackmout 16 port configuration that supports high-power PoE for an affordable PoE solution.

Main Features

16 Gigabit /10/100/1000 Mbps Ports with 16 ports of PoE+
Sixteen (16) PoE+ ports (up to 30W per port)
Easily integrate into your existing Ethernet network - no matter if it is running at 10/100Mbps or Gigabit speed
Simple set up with no software or configuration needed
Front panel LEDs keep you informed of power status, link speed and link activities
The standards-based Gigabit switches sense and adjust for network speed and cabling type automatically
PoE power budget of 183W
Superior network performance at non-blocking rate delivers true Gigabit speed with no compromise
Energy Efficient Ethernet (IEEE 802.3az) standard
  PoE+ Support

Power-Over-Ethernet (PoE) for powering IP Security Cameras, VoIP phones, wireless access points, and other Ethernet-powered devices.

Sixteen (16) PoE+ ports (up to 30W per port) allow for the connection of up to 16 PoE/PoE+ (802.3af and 802.3at) devices (up to a total PoE power budget of 183W). PoE ports may also be used for non-PoE devices.

The flexible mounting system gives you the flexibility to place the GS116PP in a desktop environment, mounted in a rack (accessories included) or wall-mounted

Key Highlights

All ports Support PoE+

All ports supports PoE+ and PoE being able to provide up to 30W per port to any power-hungry device (PTZ Cameras, PoE Lights, PD Switches, Access Points)

Flexible PoE Budget

Interchangeable External Power Supply. Increase or decrease your PoE Budget as needed

Flexible mounting options

Adapts to your needs and configuration and configuration in any environment. Rackmount, wall or desktop mounting options

Silent Design

Small form factor and silent for quiet operation makes it the ideal switch for noise-sensitive environments.

High quality components and Energy Efficiency

Unmanaged Gigabit switches are built with Top Quality components to assure a long life. Unmanaged switches are built to last, and rigorously tested to provide the reliability businesses need.

NETGEAR Unmanaged Switches also support the latest Energy Efficient Ethernet (IEEE 802.3az) standard, which reduces energy consumption when there is light traffic on an active ports or when there is no link or no activity detected. It can further save energy when a short cable is used.

NETGEAR Warranty

This product is backed by a NETGEAR ProSAFE Limited Lifetime Hardware Warranty.

Lifetime Next Business Day Hardware Replacement.

ProSUPPORT 24x7 Advanced Technical Support via phone for 90 days (Remote diagnostics performed by our technical experts for prompt resolution of technical issues). ProSUPPORT coverage can be extended by purchasing one, three, or five year contracts.

ProSUPPORT Lifetime 24x7 Advanced Technical Support via chat. (Remote diagnostics performed by our technical experts for prompt resolution of technical issues).

Upgrade the data paths of your local wired network to information superhighways with the Linksys LGS116P 16-Port Business Gigabit PoE+ Switch. Offering 16 gigabit Ethernet auto-sensing ports with wired connection speeds up to 1,000 Mbps, this unmanaged switch lets your small business expand its local network and send large files to servers, drives, and printers at gigabit speeds. Power over Ethernet Plus technology allows you to send power to devices like IP telephones or video surveillance systems through Ethernet cables without having to install separate power supplies to those devices.

Features:

16-port switch with 8 PoE+ ports (ports 1–8) and dedicated PoE power budget of 80 W
Wired connection speed up to 1,000 Mbps
16 Gigabit Ethernet autosensing ports
Quality of Service (QoS) traffic prioritisation
Power over Ethernet Plus (PoE+) support
Easy Plug-and-Play connection
Gigabit performance These unmanaged PoE+ switches offer Gigabit speeds to minimise transfer times and greatly enhance the ability to stream high-bandwidth files to connected devices without interference.


Power where you need it PoE+ support lets you deploy network systems such as wireless access, IP telephony, or video surveillance solutions more quickly and at a lower cost, without having to install separate power supplies for individual devices.


Plug-and-Play convenience Linksys unmanaged switches offer a quick and easy solution to extend your office network with plug-and-play installation.


Quality of Service (QoS) traffic prioritisation QoS traffic prioritisation gives precedence to particular devices or activities to ensure mission-critical data throughput is maintained regardless of network congestion. Auto-sensing ports automatically optimise speed for each connected device.


Switch Comparison

LGS116 LGS116P LGS124 LGS124P Standards IEEE 802.3, 802.3u, 802.3x, 802.3ab, 802.3az IEEE 802.3, 802.3u, 802.3x, 802.3ab, 802.3az, 802.3af, and 802.3at (PoE+) IEEE 802.3, 802.3u, 802.3x, 802.3ab, 802.3az IEEE 802.3, 802.3u, 802.3x, 802.3ab, 802.3az, 802.3af, and 802.3at (PoE+) Number of Gigabit Ports  16 16 24 24 PoE+ Ports N/A 8 (first 1-8 ports) N/A 12 (ports 1-6 and 13-18) PoE+ Total Budget N/A 80W N/A 120W MAC Address Table Size 8,000 entries 8,000 entries 8,000 entries 8,000 entries Bandwidth 32 Gbps (non-blocking) 32 Gbps (non-blocking) 48Gbps (non-blocking) 48 Gbps (non-blocking) Power Supply 1 External 1 External 1 Internal 1 Internal Quality Of Service 802.1p and DSCP 802.1p and DSCP 802.1p and DSCP 802.1p and DSCP Physical Specifications 288 x 102 x 26 mm 288 x 132 x 26 mm 440 x 201 x 44 mm 440 x 201 x 44 mm Mounting Wall Mount Wall Mount Rack Mount Rack Mount Warranty 5-year warranty 5-year warranty 5-year warranty 5-year warranty Package Contents Linksys LGS116 16-Port Gigabit Ethernet Switch
Power Adapter
Quick Start Guide Linksys LGS124 24-Port Gigabit Ethernet Switch
Power Adapter
Quick Start Guide Linksys LGS116P 16-Port Gigabit Ethernet PoE+ Switch
Power Cord
Quick Start Guide
Rackmount Kit Linksys LGS124P 24-Port Gigabit Ethernet PoE+ Switch
Power Cord
Quick Start Guide
Rackmount Kit   Buy Buy Buy Buy

Get Easy-to-Use Switches with Zero Configuration

Build a fast, reliable network with these entry-level, low-cost, reliable networking solutions that provide plug-and-play connectivity. The Cisco SF110D-16HP Unmanaged Switches deliver Fast Ethernet switching with key features like Power over Ethernet (PoE), energy efficiency, traffic prioritisation, and network diagnostics for seamless integration into the rest of the network.

Features and Capabilities

The SF110D-16HP Cisco Small Business 110 Series Unmanaged Switches deliver wire-speed Fast Ethernet connectivity to connect your small business office. The 16 Port switches offer plug-and-play basic Layer 2 connectivity. That includes low-cost PoE, quality of service (QoS), cable diagnostics, and loop detection - all in a switch that you can set up by yourself in just minutes..

Features:


16 Port 10/100 Fast Ethernet Unmanaged Desktop Switch With 8 Ports PoE
Delivers powerful network performance and flexibility for small business networks, without the complexity. With no installation software and nothing to configure, you get an affordable, reliable network that just works right out of the box
Power over Ethernet:
PoE provides a power budget of 64 Watts to IP phones, access points, and other devices.
QoS intelligence
Prioritises delay-sensitive services such as voice or video to improve your network's performance
An eco-friendly solution
A variety of power-saving features, including Energy-Efficient Ethernet, optimises power usage and reduces energy consumption without compromising performance.
Ease of use
Ready to use right out of the box, there is no software to install and nothing to configure.
Simple setup: Designed for small office spaces, desktop models offer a wall-mount option for discreet mounting under a desk or on the wall of an office or conference room
Switch Comparison

SF110-16 SF110D-16 SF110D-16HP SG110-16 SG110-16HP Form Factor Desktop, Rackmount Desktop Desktop Desktop, Rackmount Desktop, Rackmount Ports 16 x 10/100 16 x 10/100 16 x 10/100 16 x 10/100/1000 16 x 10/100/1000 Number of PoE Ports     8   8 Power Dedicated to PoE     64 watts   64 watts Features Flow control, Layer 2 switching, auto-negotiation, auto-uplink (auto MDI/MDI-X), Weighted Round Robin (WRR) queuing, quality of service (QoS), cable diagnostics, loop detection, Energy Efficient Ethernet Status indicators Power, link/activity, cable diagnostics, loop detection Power, link/activity, cable diagnostics, loop detection Power, link/activity, PoE, cable diagnostics, loop detection Power, link/activity, cable diagnostics, loop detection Power, link/activity, PoE, cable diagnostics, loop detection Jumbo frame support       Performance Switching capacity: 3.2 Gbps ¦ Forwarding performance (64-byte packet size) : 2.4 Mpps Switching capacity: 3.2 Gbps ¦ Forwarding performance (64-byte packet size) : 2.4 Mpps Switching capacity: 3.2 Gbps ¦ Forwarding performance (64-byte packet size) : 2.4 Mpps Switching capacity: 32 Gbps ¦ Forwarding performance (64-byte packet size) : 23.8 Mpps Switching capacity: 32 Gbps ¦ Forwarding performance (64-byte packet size) : 23.8 Mpps Power Supply 1 internal 1 external 1 internal 1 internal 1 internal Fanless Physical Specifications 279(w) x 45(h) x 170(d)mm 130(w) x 39(h) x 130(d)mm 160(w) x 43(h) x 90(d)mm 279(w) x 45(h) x 170(d)mm 279(w) x 45(h) x 170(d)mm

Get networks up and running with plug-and-play unmanaged switches. PoE 183W power budget lets you dedicate power for network devices with a simple CAT-5 cable.

NETGEAR 300 Series Gigabit Ethernet Unmanaged switches with PoE provide easy, reliable, and affordable network connectivity for home and small offices. With these unmanaged plug-and-play switches, you can expand your network connections to multiple devices instantly.

The unmanaged switches provides power and data from a single Ethernet (CAT-5e) cable to devices such as IP cameras, VoIP/ Internet-based phones, wireless access points, etc. The majority of these models also support PoE power auto-balance and allocation feature.

NETGEAR’s unique PoE technology automatically balances the PoE power based on the device needs independent of PoE class detected. These switches deliver the power the device needs, at the most granular level.

Key Features

16 Gigabit ports
Simple set up with no software to install or configuration needed and zero maintenance
Non-blocking switching architecture for maximum throughput at wire speed
16 PoE+ ports with 183W total power budget to power wireless AP, IP Cameras, IP Phones and much more
Upgradable to 183W PoE+ Budget (w/separately purchased power supply module)
NETGEAR's unique PoE technology automatically balances the PoE power at the most granular level on each port, depending on the device needs.
The fanless design means zero added noise wherever its located, making it ideal for noise-sensitive environments
Designed to optimize power usage lowering its cost to operate.
Supports desktop and wall placement. Includes wall mount kit in the box
Ensure interoperability with any standards-based PDs
Durable and Rugged




Ethernet Port Configuration: 16 Gigabit ports


Versatile Mounting Options: Supports desktop or wall placement and includes all the necessary mounting hardware in the box


Plug & Play: Simple set up with no software to install or configuration needed
Power-Over-Ethernet: 16 PoE+ ports with 183W total power budget, for  high-power PoE devices


PoE Power Auto-Balance and Allocation: NETGEAR’s unique PoE technology automatically balances the PoE power at the most granular level on each port, depending on the device needs.  

 

Instant Connectivity and Reliable Performance
The NETGEAR Gigabit Unmanaged Switch series helps your business cost-effectively expand your network to Gigabit speeds and higher port counts. The GS516UP joins the series and offers 8 Ultra60 PoE++ ports and 8 PoE+ ports to power high-power PoE devices. With a total PoE power budget of 380W, deploy denser PoE+ and PoE++ devices to a single switch rather than multiple.

The GS516UP is energy efficient, built to last, and rigorously tested to provide the reliability your business needs. 802.1p traffic prioritization and jumbo frame support allow for seamless integration with more sophisticated networks.

Plug and Play - Simple setup with no software or configuration needed


Power-Over-Ethernet - large 380W total PoE budget with 8 Ultra60 PoE++ ports and 8 PoE+ ports to power wireless AP, 4K/8K IP Cameras, LED lights, IoT devices, and much more


Gigabit Ethernet - 16 auto-sensing 10/100/1000 Mbps Gigabit Ethernet ports with up to 32Gb non-blocking switching


Limited Lifetime Warranty - Next Business Day replacement and 24/7 chat with a NETGEAR expert
Easy Monitoring - Per port LEDs for port activity and speed


Compact and Flexible Form Factor - Small case with internal power supply and whisper-quiet fans, perfect for desktop, wall-mount, or rackmount deployment


PoE Auto-Balance - unique PoE technology automatically balances the PoE power based on the device needs independent of PoE class detected. The switches deliver the power the device needs, at the most granular level.
 



Powerful Ultra60 PoE++

Ideal for powering and connecting 802.11AX wireless access points, 4K/8K IP surveillance cameras, PoE lighting, and high power audio speakers, the GS516UP gives you a highly cost-effective and powerful switch with the best cost/PoE budget ratio.

NETGEAR Ultra60 PoE++ Unmanaged Switches support the latest Energy Efficient Ethernet (IEEE 802.3bt) standard, powerful enough to support devices that require greater power.

The GS516UP includes 8 UltraPoE++ ports that can deliver up to 60W of power per port.




PoE Mode

Your business is always changing and growing, but not all your devices may be 802.3bt standard compatible. PoE mode on the GS516UP solves this problem by providing power to both pre-bt and bt standard devices.

GS516UP by default uses 802.3bt standard, only compatible for bt standard devices. 802.3bt Standard Devices: to power bt standard devices, select 802.3bt mode to receive 60W of power. Pre-802.3bt Standard Devices: to power up pre-802.3bt standard products, select the pre-802.3bt mode to receive more than 30W of power. If the GS516UP is set to pre-802.3bt mode but the device is standard 802.3bt, then PoE++ power will not be delivered to the device. The switch will only deliver 802.3af (<15W)

Netgear GS316PP 16 Port Gigabit Ethernet Switch SOHO Ethernet Unmanaged Switches provide easy and affordable network connectivity to small offices and home offices. They are easy to use, reliable, and rugged with metal enclosures.

Power-over-Ethernet (PoE) support is also available for supplying both power and data across a single CAT-5 ethernet cable to devices such as IP security cameras, VoIP phones, wireless access points, and more.

With these Plug and Play switches, you can quickly and easily expand your network connections to multiple devices, with no configuration required. Available with 5 to 48 ports, these switches also support energy saving technologies to help you save your power and money.

Ethernet Port Configuration: 16 Gigabit ports
PoE Power Auto-Balance and Allocation: NETGEAR’s unique PoE technology automatically balances the PoE power at the most granular level on each port, depending on the device needs.
Plug & Play: Simple set up with no software to install or configuration needed
Power-Over-Ethernet: 16 PoE+ ports with 183W total power budget, for high-power PoE devices
Versatile Mounting Options: Supports desktop, wall or rackmount placement, and includes all the necessary mounting hardware in the box
NETGEAR 300 Series Gigabit Ethernet Unmanaged Switches with PoE provide easy, reliable, and affordable network connectivity for home and small offices. With these unmanaged plug-and-play switches, you can expand your network connections to multiple devices instantly.

The NETGEAR 16-Port PoE+ Gigabit Ethernet Plus Switch delivers essential business networking features and powers PoE+ devices like VoIP phones, IP cameras, and more.

Gigabit Ethernet: 16 ports provide up to 1000 Mbps of dedicated, non-blocking bandwidth each
PoE+ Support: 15 PoE+ ports provide a total of 180W of power so you can power and connect your devices with a single wire
Advanced PoE Controls: Manage PoE prioritization, PoE power limit per port, PoE scheduling and more for simple control over all PoE-powered devices
Non-Blocking Switching: 10Gbps (10/100/1000 Mbps) line rate fabric ensures congestion-free connectivity to your devices
Versatile Mounting Options: Install your switch on your desktop or mount it to your wall with the hardware provided in the box
Fanless Design: Silent operation makes this switch perfect for noise-sensitive environments




New and improved Plus switches

Along with the already great Plus features, GS316EP enhances your business networking experience even more with exciting new features: advanced PoE controls with uninterrupted PoE and more, business-friendly GUI, simplified VLAN and QoS set-up, and multi-language support.

Meet Your Business Needs

This Plus Switch is packed with network-optimizing features including VLANs, QoS, and IGMP Snooping at an affordable price.

  Power for PoE+ Devices

Deliver power and network connectivity to all your PoE+ devices, including wireless access points, door locks, and many more.

Easy Management

Setup is simple – just plug and play. Configure your network using a user-friendly web GUI.

 

Aruba Instant On 1430

Unmanaged Ethernet switches for simple connectivity.


Fast, reliable, and secure network connections play a critical role in helping small businesses maintain a competitive advantage in an increasingly virtual world. From retail stores, to cafes, to professional offices, small businesses need a strong network to provide amazing online experiences while keeping employees productive. And with constrained resources and a growing number of interconnected devices, getting the most valuable networking solution for the money has become a basic need for budget-strapped small businesses.




Benefits

Simplicity at its best
Plug-and-play switches that work together with Instant On APs right out of the box



Flexible management modes
Instant On cloud-based management (via mobile app and web portal), local web GUI, or zero configuration needed with unmanaged models



Conect more IOT devices
Class 4 and Class 6 PoE support to power more devices

 

Peace of mind
Built-in security features for a worry-free networking experience



Scales with your business
Grow quickly and simply with stacking and high-speed uplinks



We've got you covered
Support in all the right places: limited lifetime warranty, phone and chat support, and an active online community

 
Easy to set up and manage, Aruba Instant On switches are perfect for work-from-home and for small and growing businesses. Providing a foundation for reliable connectivity, switches maximize both performance and peace of mind across your network and devices.

Aruba Instant On offers a comprehensive portolio of smartmanaged and unmanaged switches ideal for small businesses. With models ranging from 5 to 48 Gigabit Ethernet ports, optional high speed 10 Gig connectivity, Power over Ethernet (PoE) models, and flexible management choices including a cloud-based mobile app, Aruba Instant On offers everything you need for a simple, reliable wired network.




Perfect for:

Small office



Home office



Coffee shop

 


Key features • Unmanaged Layer 2 Gigabit Ethernet switch series ready to deploy in 5-, 8-, 16-, 24-, and 26-port models

• Up to 124W of PoE to power APs, IP Phones, and other IoT devices

• No configuration or management needed

• Plug-and-play with fully automated functions and zero ongoing maintenance

• Quality of Service (QoS) and flow control for improved network efficiency

• Fan-less with Energy Efficient Ethernet for low power consumption

• Class B certified for home office networks (5 and 8 port models)


Technology brings new revenue opportunities, more effective communication, and improved productivity to businesses of all sizes. Yet it also poses daily challenges of configuration and maintenance, especially for small businesses who lack IT support. Small offices and home offices need reliable network connectivity that’s fast, configuration-free, and affordable for even the most budget-strapped businesses.

The Aruba Instant On 1430 Switch Series is a plug-and-play unmanaged switch series for small businesses looking for simple, reliable, and lowcost network connectivity. These easy-to-use switches deliver Layer 2 Gigabit Ethernet switching capabilities — at an affordable price point — to help connect and share common resources like printers and access points, without any complicated network configuration. With plug-andplay operation, fully automated functions, zero ongoing maintenance, and Power over Ethernet (PoE) models, these switches deliver simple, reliable connectivity for the smallest SMBs and home offices.






 






Key Benefits • Fast performance

Unmanaged Layer 2 Gigabit Ethernet switch series ready to deploy in 5-, 8-, 16-, 24-, and 26-port models, including 8- and 16-port PoE models.

• Plug-and-play:

Fully automated functions with no configuration or management needed.

• PoE for IoT:

Up to 124W of PoE to power APs, IP Phones, and other IoT devices.

• Quiet deployment:

All models are fan-less for silent operation in acoustically sensitive spaces.

• Ready for home and office:

Class B certified for home office networks (5 and 8 port models).

• Peace of mind:

Limited Lifetime Warranty means Aruba has your back now and in the future.




The Instant On Differentiators Better Together

Aruba Instant On products work together to provide a seamless Wi-Fi experience. Wired and wireless voice traffic is prioritized with high QoS priority end-to-end for optimal voice performance.

Industry-leading support and warranty

Expert-level support and industry-leading limited lifetime warranty are also included, along with chat support for the life of the product.




Plug-and-play The Aruba Instant On 1430 switches are easy-to-use unmanaged Gigabit Ethernet switches ideal for small businesses and home offices looking for simple, reliable connectivity that’s configuration-free.






Fast wired performance Connect devices quickly with these unmanaged Layer 2 Gigabit Ethernet switches that range in size from 5-port to 26-port models, with and without PoE, so can you install just what you need. Span longer distances to devices with SFP fiber uplinks on the 26-port model.




Plug and play simplicity Unmanaged means this series requires zero configuration and no maintenance – it comes with fully automated functions like Quality of Service (QoS) that prioritizes time-sensitive voice and video data for a better user experience.




Quiet and energy efficient All models are fan-less for silent operation and support Energy Efficient Ethernet (IEEE 802.3az) to save energy by using less power during idle times without compromising performance.




Power over Ethernet (PoE) Quickly connect and power access points, surveillance cameras, and other IoT devices with 8-port and 16-port Class 4 PoE models that eliminate need for power outlets in hard-to-reach places.




Affordable reliability You can depend on these cost-effective entry level switches from HPE Aruba that include limited lifetime warranty with 24x7 chat.




Highlights

Simplicity at its best
Plug-and-play switches that work right out of the box
Zero configuration required



Reliable connectivity
Connect faster with Gigabit Ethernet speed
PoE to power devices like APs and IP phones



We’ve got you covered
Industry-leading limited lifetime warranty and support
24 x 7 chat support for entire warranty period

 

Key Features Gigabit Ethernet speeds - Supports half/full-duplex auto-negotiating capability on access ports that doubles the throughput of every port.

Long distance fiber connectivity - 26-port model includes two 1G SFP fiber ports for uplinks and to support long distance connectivity using fiber transceivers, for a total of 28 Ethernet ports.

Simplified cabling - Automatically adjusts for straight-through or crossover cables on all 10/100/1000 ports using Auto MDI/MDI-X.

Ethernet Alliance PSE Class 4 PoE Certification - Power Over Ethernet (PoE) functionality is supported on two 1430 models that provide up to 30 W per port, which allows support of Class 4 PoE or IEEE 802.3at-capable devices such as video IP phones, wireless access points, as well as any 15.4 W IEEE 802.3af compliant end device, thereby eliminating the need for additional electrical cabling and circuits.

EAPoL frames forwarding - 802.1x EAP over LAN frames are forwarded through the switch so that clients can authenticate when the device gives connectivity between an authenticator and supplicants.

STP BPDU frames forwarding - The switch forwards the BPDU frames to make sure that Spanning Tree Protocol works correctly preventing loops in the topology.

Prioritize voice and video - Quality of Service provides priority of time-sensitive packets (like VoIP and video) over other traffic based on DSCP or IEEE 802.1p classification.

Flow control - Provides a flow-throttling mechanism propagated through the network to prevent packet loss at a congested node.

Prioritize voice and video - Provides a flow-throttling mechanism propagated through the network to prevent packet loss at a congested node.

Jumbo frame support - Provides up to 9216 bytes frame size to improve the performance of large data transfers.

Energy Efficient Ethernet (EEE) - Compliant with 802.3az standard requirements to save energy during periods of low data activity.

Fan-less operation - Requires less power to operate and enables quiet operation in acoustically sensitive environments.




Why Upgrade? Managed switches give you the control of your network, allowing you to customize and monitor configuration settings, including controls that prioritize and segment network traffic. While automation tools help simplify configuration and management, when all you need is basic Ethernet connectivity and you don’t have the time or expertise to handle installs, an unmanaged switch is the right solution. The Aruba Instant On switching portfolio includes both smart-managed and unmanaged switches, so you can choose what’s best for you and your business, without compromising enterprise-grade reliability or support.

• More PoE ports

Connect more IoT devices with PoE enabled on all 16 ports vs. partial PoE on HPE OfficeConnect 24-port model.

• Better user experience

Spanning Tree BPDU Forwarding for improved spanning tree efficiency and 802.1x EAPoL forwarding for faster user-client authentication.

• Better warranty

Limited Lifetime warranty vs. 3-year warranty on HPE OfficeConnect 1405 series.

• Smooth migration

Both switch series work together allowing seamless migration at your own pace.




Model Comparison Chart

Cisco Business 110 Series Unmanaged Switch

Affordable, Plug-and-Play Switches for Small Business Networks

These are times of unprecedented change for small businesses. Consumers are more demanding than ever before. Online transactions have accelerated. While this new promises greater reward, it also requires small businesses to accelerate digital transformation. At the same time, employees are increasingly distributed across remote and office locations, and this trend is likely to continue. You need a network solution that provides fast, reliable access to critical cloud-based business applications across a remote and in-office workforce.

Now you can have a high-performance, business-class network with the Cisco® Business 110 Series Unmanaged Switches. These affordable plug-and-play switches are ideal for small offices, workgroups, departments, and growing offices with limited IT know-how and support.




Highlights • Affordable 10/100/1000-Mbps speeds for bandwidth-hungry applications

• Plug-and-play, not IT knowledge required

• 5- to 24-port models that are desktop or rack mountable

• Power over Ethernet models to provide power to access points, IP phones and, other devices


Cisco Business 110 Series Unmanaged Switches, part of the Cisco Business networking portfolio, are a family of affordable switches that provide Gigabit Ethernet connectivity for your small business network. Available in desktop and rack-mount models, these switches are designed to suit any small business with basic network needs and are optimized for power efficiency. They provide robust network connectivity your business demands, as well as added reliability with advanced features such as Quality of Service (QoS), loop detection, and cable diagnostics, all in a switch that you can set up yourself in minutes. The Cisco Business 110 Series switches bring the proven reliability and investment protection of Cisco networking solutions to your small business.




Simple Cisco Business 110 Series switches work right out of the box, with plug-and-play capability without software installation and configuration. Each switch port independently sets itself for the optimal speed and determines whether to run in half- or full-duplex mode automatically. As a standards-based Cisco solution, Cisco Business 110 Series switches are also designed to immediately accommodate all of the devices in your network.




Flexible deployment Designed for small office spaces, Cisco Business 110 Series switches are available in 5-, 8-, 16-, and 24-ports configurations, providing ultimate flexibility for diverse use cases and deployment scenarios. The Cisco Business 110 Series switches are also available in both compact desktop and rack-mount models. The desktop models offer a wall-mount option for discreet mounting under a desk or on the wall of an office or conference room. All switches have no fans, so they run silently and unobtrusively in any workspace.




High performance Cisco Business 110 Series switches deliver the performance you need to run your business applications, including bandwidth-intensive cloud applications and video services, and to avoid slow and sluggish networks. They support Gigabit Ethernet speeds, unlocking a new level of capacity and performance in your business network and letting you transfer large files in seconds.




Reduced energy costs Cisco Business 110 Series switches are designed to help conserve energy by optimizing power use without compromising performance, which protects our environment and reduces your energy costs. In addition, they support the Energy Efficient Ethernet (IEEE 802.3az) standard, which reduces energy consumption by monitoring the amount of traffic on an active link and putting the link into a sleep state during quiet periods.




Power over Ethernet (PoE) Cisco Business 110 Series switches are available with PoE ports. This capability simplifies the deployment of IP telephony, wireless, video surveillance, and other IoT solutions by allowing you to connect and power network endpoints over a single Ethernet cable. With no need to install separate power supplies for IP phones or wireless access points, you can take advantage of advanced communications technologies more quickly and at a lower cost.




Advanced technologies All switches include advanced Cisco traffic-handling features to keep your applications running at peak performance. Integrated QoS intelligence on all models automatically prioritizes delay-sensitive services such as voice or video to improve your network's performance. Loop detection helps discover loops in the network that you might have accidentally created, thus avoiding storms that will bring your network to a stall. Cable diagnostics help to quickly identify and troubleshoot network cabling faults and issues. Fast store-and-forward switching identifies damaged packets and prevents them from being passed on through the network. All of these features run automatically, with no management or configuration required.




Peace of mind Cisco Business 110 Series switches deliver the rock-solid reliability you expect from a Cisco switch. The solution has been rigorously tested to make sure of optimal uptime and performance. In addition, the limited lifetime hardware warranty provides peace of mind


Full specification and details can be found in the Product Datasheet PDF file

Build a reliable, easy-to-use business network at an affordable price with Cisco Business 250 series Gigabit smart switches . From connectivity to cloud applications, networking plays a crucial role in every business journey. Reliability, security, and affordability continue to be top of mind while ongoing management and operations add additional complexity that take time and resources.

Cisco Business is a portfolio of affordable wireless access points, switches and routers designed and built for Small Business . Managed through Cisco Business Dashboard and mobile app , the portfolio provides a simple and reliable experience. Cisco Business Dashboard simplifies traditional challenges in deploying and managing business networks by automating the deployment, monitoring and lifecycle management of the network.


Model CBS250-16P-2G Specifics:
Network ports 16 x 1G


Power over Ethernet (PoE) PoE+ (120W)


Uplink ports 2 x 1G SFP


Fan Fanless


Power supply Internal

Warranty Limited lifetime warranty

Cisco Business 250 Series Range Details:

Layer 2 switching
VLAN support
Spanning Tree Protocol (STP)
access control list (ACL)
Quality of service (QoS)
IPv4/IPv6 static routing
An energy-efficient solution
The Cisco Business 250 Series is the next generation of affordable smart switches that combine powerful performance and reliability with a complete suite of the features you need for a solid business network. These switches provide flexible management options, comprehensive security capabilities and Layer 3 static routing features far beyond those of an unmanaged or consumer-grade switch, at a lower cost than for fully managed switches. When you need a reliable solution to share online resources and connect computers, phones, and wireless access points, Cisco Business 250 Series Smart Switches provide the ideal solution at an affordable pricing point.

A powerful foundation for the basic business network Cisco Business 250 Series Smart Switches give you just the right the features, performance, and reliability you need, without making you pay for advanced features you don’t. With Cisco Business 250 Series switches, you can rest assured that your business applications and communications tools are resting on a strong technology foundation, so you can focus on achieving your business goals.

Network management:

On-device UI, Cisco Business Dashboard and mobile app
Business applications

High-speed desktop connectivity
Flexible wireless connectivity
Unified communications
Features and benefits:

Easy configuration and management
Cisco Network Plug and Play solution
Configuration wizards simplify the most common configuration tasks and provide the ultimate tool for anyone to set up and manage the network.
Reliability and performance
Layer 3 static routing
Network security
Cisco Business Dashboard For more information, visit www.cisco.com/go/cbd

Cisco Business 350 Series Switches provide the ideal combination of affordability and capabilities for small office and help you create a more efficient, better-connected workforce. The Cisco Business 350 Series Switches is a family of fixed-configuration managed Ethernet switches. Models are available with 8 to 48 ports of Gigabit Ethernet connectivity and Gigabit or 10-Gigabit uplinks, providing optimal flexibility to create exactly the right building block for small office networks.


Model CBS350-16P-2G Specifics:
Network ports 16 x 1G


Uplink ports 2 x 1G SFP


Power over Ethernet (PoE) PoE+ (120W)

Stacking N/A


Fan Fanless


Power supply Internal
Cisco Business 350 Series Range Details:

Layer 2 switching
VLAN support
Spanning Tree Protocol (STP)
Advanced threat protection
IPv6 first-hop security
Quality of service (QoS)
sFlow
IPv4/IPv6 static routing
Enhanced limited lifetime warranty
Network management:

Cisco Business Dashboard; on-device UI, CLI, and SNMP
The Cisco Business 350 Series is a portfolio of affordable managed switches that provide a critical building block for any small office network. Intuitive dashboard simplifies network setup, and advanced features accelerate digital transformation, while pervasive security protects business critical transactions.

However, unlike other small business switching solutions that only provide managed network capabilities in the costliest models, all Cisco Business 350 Series Switches support the advanced security management capabilities and network features you need to support enterprise-class data, voice, security, and wireless technologies. At the same time, these switches are simple to deploy and configure, allowing you to take advantage of the managed network services your business needs. 

Cisco Business 350 Series Switches are available with up to 48 Power over Ethernet (PoE) ports. This capability simplifies advanced technology deployments such as IP telephony, wireless, and IP surveillance by allowing you to connect and power network endpoints over a single Ethernet cable. With no need to install separate power supplies for IP phones or wireless access points, you can take advantage of advanced communications technologies more quickly and at a lower cost.



Models support 802.3af PoE and 802.3at PoE+. Networkwide Automatic Voice Deployment Using a combination of Cisco Discovery Protocol, Link Layer Discovery Protocol-Media Endpoint Discovery (LLDP-MED), Auto Smartports, and Voice Services Discovery Protocol (or VSDP, a unique Cisco protocol), customers can deploy an end-to-end voice network dynamically. The switches in the network automatically converge around a single voice Virtual Local Area Network (VLAN) and Quality of Service (QoS) parameters and then propagate them out to the phones on the ports, where they are discovered. For example, automated voice VLAN capabilities let you plug any IP phone (including third-party phones) into your IP telephony network and receive an immediate dial tone. The switch automatically configures the device with the right VLAN and QoS parameters to prioritize voice traffic.

IPv6 Support As the IP address scheme evolves to accommodate a growing number of network devices, the Cisco Business 350 Series Switches can support the transition to the next generation of networking. These switches continue to support previous-generation IPv4, allowing you to evolve to the new IPv6 standard at your own pace and helping ensure that your current network will continue to support your business applications in the future.

Cisco Business 350 Series Switches have successfully completed rigorous IPv6 testing and have received the USGv6 and IPv6 Gold certification. Advanced Layer 3 Traffic Management The Cisco Business 350 Series Switches enable a more advanced set of traffic management capabilities to help growing businesses organize their networks more effectively and efficiently. For example, the switches provide static LAN Layer 3 routing, allowing you to segment your network into workgroups and communicate across VLANs without degrading application performance. With these capabilities, you can boost the efficiency of your network by offloading internal traffic-handling tasks from your router and allowing it to manage primarily external traffic and security.

Cisco Business 350 Series Switches provide the ideal combination of affordability and capabilities for small office and help you create a more efficient, better-connected workforce. The Cisco Business 350 Series Switches is a family of fixed-configuration managed Ethernet switches. Models are available with 8 to 48 ports of Gigabit Ethernet connectivity and Gigabit or 10-Gigabit uplinks, providing optimal flexibility to create exactly the right building block for small office networks.


Model CBS350-16P-E-2G Specifics:
Network ports 16 x 1G


Uplink ports 2 x 1G SFP


Power over Ethernet (PoE) PoE+ (120W)

Stacking N/A


Fan Fanless


Power supply External
Cisco Business 350 Series Range Details:

Layer 2 switching
VLAN support
Spanning Tree Protocol (STP)
Advanced threat protection
IPv6 first-hop security
Quality of service (QoS)
sFlow
IPv4/IPv6 static routing
Enhanced limited lifetime warranty
Network management:

Cisco Business Dashboard; on-device UI, CLI, and SNMP
The Cisco Business 350 Series is a portfolio of affordable managed switches that provide a critical building block for any small office network. Intuitive dashboard simplifies network setup, and advanced features accelerate digital transformation, while pervasive security protects business critical transactions.

However, unlike other small business switching solutions that only provide managed network capabilities in the costliest models, all Cisco Business 350 Series Switches support the advanced security management capabilities and network features you need to support enterprise-class data, voice, security, and wireless technologies. At the same time, these switches are simple to deploy and configure, allowing you to take advantage of the managed network services your business needs. 

Cisco Business 350 Series Switches are available with up to 48 Power over Ethernet (PoE) ports. This capability simplifies advanced technology deployments such as IP telephony, wireless, and IP surveillance by allowing you to connect and power network endpoints over a single Ethernet cable. With no need to install separate power supplies for IP phones or wireless access points, you can take advantage of advanced communications technologies more quickly and at a lower cost.



Models support 802.3af PoE and 802.3at PoE+. Networkwide Automatic Voice Deployment Using a combination of Cisco Discovery Protocol, Link Layer Discovery Protocol-Media Endpoint Discovery (LLDP-MED), Auto Smartports, and Voice Services Discovery Protocol (or VSDP, a unique Cisco protocol), customers can deploy an end-to-end voice network dynamically. The switches in the network automatically converge around a single voice Virtual Local Area Network (VLAN) and Quality of Service (QoS) parameters and then propagate them out to the phones on the ports, where they are discovered. For example, automated voice VLAN capabilities let you plug any IP phone (including third-party phones) into your IP telephony network and receive an immediate dial tone. The switch automatically configures the device with the right VLAN and QoS parameters to prioritize voice traffic.

IPv6 Support As the IP address scheme evolves to accommodate a growing number of network devices, the Cisco Business 350 Series Switches can support the transition to the next generation of networking. These switches continue to support previous-generation IPv4, allowing you to evolve to the new IPv6 standard at your own pace and helping ensure that your current network will continue to support your business applications in the future.

Cisco Business 350 Series Switches have successfully completed rigorous IPv6 testing and have received the USGv6 and IPv6 Gold certification. Advanced Layer 3 Traffic Management The Cisco Business 350 Series Switches enable a more advanced set of traffic management capabilities to help growing businesses organize their networks more effectively and efficiently. For example, the switches provide static LAN Layer 3 routing, allowing you to segment your network into workgroups and communicate across VLANs without degrading application performance. With these capabilities, you can boost the efficiency of your network by offloading internal traffic-handling tasks from your router and allowing it to manage primarily external traffic and security.

Cisco Business 350 Series Switches provide the ideal combination of affordability and capabilities for small office and help you create a more efficient, better-connected workforce. The Cisco Business 350 Series Switches is a family of fixed-configuration managed Ethernet switches. Models are available with 8 to 48 ports of Gigabit Ethernet connectivity and Gigabit or 10-Gigabit uplinks, providing optimal flexibility to create exactly the right building block for small office networks.


Model CBS350-16FP-2G Specifics:
Network ports 16 x 1G


Uplink ports 2 x 1G SFP


Power over Ethernet (PoE) PoE+ (240W)

Stacking N/A


Fan Fanless


Power supply Internal
Cisco Business 350 Series Range Details:

Layer 2 switching
VLAN support
Spanning Tree Protocol (STP)
Advanced threat protection
IPv6 first-hop security
Quality of service (QoS)
sFlow
IPv4/IPv6 static routing
Enhanced limited lifetime warranty
Network management:

Cisco Business Dashboard; on-device UI, CLI, and SNMP
The Cisco Business 350 Series is a portfolio of affordable managed switches that provide a critical building block for any small office network. Intuitive dashboard simplifies network setup, and advanced features accelerate digital transformation, while pervasive security protects business critical transactions.

However, unlike other small business switching solutions that only provide managed network capabilities in the costliest models, all Cisco Business 350 Series Switches support the advanced security management capabilities and network features you need to support enterprise-class data, voice, security, and wireless technologies. At the same time, these switches are simple to deploy and configure, allowing you to take advantage of the managed network services your business needs. 

Cisco Business 350 Series Switches are available with up to 48 Power over Ethernet (PoE) ports. This capability simplifies advanced technology deployments such as IP telephony, wireless, and IP surveillance by allowing you to connect and power network endpoints over a single Ethernet cable. With no need to install separate power supplies for IP phones or wireless access points, you can take advantage of advanced communications technologies more quickly and at a lower cost.



Models support 802.3af PoE and 802.3at PoE+. Networkwide Automatic Voice Deployment Using a combination of Cisco Discovery Protocol, Link Layer Discovery Protocol-Media Endpoint Discovery (LLDP-MED), Auto Smartports, and Voice Services Discovery Protocol (or VSDP, a unique Cisco protocol), customers can deploy an end-to-end voice network dynamically. The switches in the network automatically converge around a single voice Virtual Local Area Network (VLAN) and Quality of Service (QoS) parameters and then propagate them out to the phones on the ports, where they are discovered. For example, automated voice VLAN capabilities let you plug any IP phone (including third-party phones) into your IP telephony network and receive an immediate dial tone. The switch automatically configures the device with the right VLAN and QoS parameters to prioritize voice traffic.

IPv6 Support As the IP address scheme evolves to accommodate a growing number of network devices, the Cisco Business 350 Series Switches can support the transition to the next generation of networking. These switches continue to support previous-generation IPv4, allowing you to evolve to the new IPv6 standard at your own pace and helping ensure that your current network will continue to support your business applications in the future.

Cisco Business 350 Series Switches have successfully completed rigorous IPv6 testing and have received the USGv6 and IPv6 Gold certification. Advanced Layer 3 Traffic Management The Cisco Business 350 Series Switches enable a more advanced set of traffic management capabilities to help growing businesses organize their networks more effectively and efficiently. For example, the switches provide static LAN Layer 3 routing, allowing you to segment your network into workgroups and communicate across VLANs without degrading application performance. With these capabilities, you can boost the efficiency of your network by offloading internal traffic-handling tasks from your router and allowing it to manage primarily external traffic and security.

Product Overview

The TL-SG1428PE is a Professional High Power 18-Port Gigabit Rackmount Switch with 16-Port PoE+ with Plug and Play and Multi-Purpose PoE Switch with Powerful Performance


Product Features
16× gigabit PoE+ RJ45 ports, 2× gigabit non-PoE RJ45 ports, and 2× combo gigabit SFP slots


High PoE power budget with up to 30 W for each PoE port and 250 W for all PoE ports*


Working with IEEE 802.3af/at compliant PDs


Plug and play, with no configuration and installation needed


802.1p/DSCP QoS enable smooth latency-sensitive traffic


Durable metal casing and professional heat dissipation design ensure a wide operating temperature range (0–50 ?)

Dedicated 16-Port PoE+ Switch (250 W Budget) for Numerous Applications

Compliance with the 802.3af/at PoE+ standard supports up to 30 W on each PoE port. The total 250 W PoE power budget* for the 16× gigabit PoE+ ports makes it suitable for a wide range of applications, from surveillance to networking in offices, dormitories, and small businesses. It is fully compatible with IP cameras, access points, IP phones, computers, printers, and etc.


QoS for a Lag-Free Experience

Ensures smooth traffic for latency sensitive applications, such as voice and video, by designating the priority of traffic based on Quality of Service (QoS).  
Intelligent Power Management to Prevent Power Overload

When your total power consumption exceeds 250 W, Intelligent Power Management automatically cuts lower priority ports’ power to ensure high-priority ports’ power supply. This protects the device from power overload operation. It also automatically detects the required PoE power for your device and protects your non-PoE equipment from being damaged.

 
Wide Operating Temperature with Good Heat Dissipation

Durable metal casing and professional heat dissipation design ensure the wide operating temperature (0–50?) with reliability.

 

Fully managed, Gigabit PoE+ switch with (16) Gigabit RJ45 ports and (2) SFP ports. Features

(16) GbE RJ45 ports
(2) SFP ports
150W total PoE availability
Rack-mountable, 1U
Specifications

Mechanical

Dimensions: 443 x 43 x 221 mm (17.44 x 1.69 x 8.70")
Weight: Without Mount Brackets :2.80 kg (6.17 lb) With Mount Brackets: 2.89 kg (6.37 lb)
Mounting: 19" 1U Rack-Mount
Hardware

Management Interface: UART Console Out-of-Band, Ethernet In-Band
Networking Interfaces: (16) 10/100/1000 Mbps RJ45 Ports, (2) 1 Gbps SFP Ports
POE Interfaces: PoE/PoE+ (pins 1, 2+; 3, 6-), 24VDC Passive PoE (pins 4, 5+; 7, 8-)
Power Input: 100-240VAC
Max. Power Consumption: 150W
Operating Humidity: 90% Noncondensing
Operating Temperature: -25 to 55° C(-13 to 131° F)

Ubiquiti UniFi USW-16-POE Gen2: Power Up Your Network with Performance and FlexibilityThe Ubiquiti UniFi USW-16-POE Gen2 is a powerful and feature-packed managed switch designed to streamline network expansion and power your devices efficiently.Second-Generation UniFi Switching

Powerful Hardware and Software Expand and power your network with the UniFi® PoE Switch, part of the Ubiquiti® UniFi Enterprise System

(16) 10/100/1000 RJ45 Ports
(1-8) IEEE 802.3af/at
(2) 1G SFP Ethernet Ports
Up to 32W of wattage per port with a PoE budget of 42W


Near Silent Cooling Ubiquitis new airflow design reduces the need for fan usage.

UniFi Switch Gen 1 vs. Gen 2 Sound Level Comparison*
UniFi Gen 2 Pro switches offer lower sound levels.



Touchscreen Display The 1.3" touchscreen display allows easy monitoring and quick troubleshooting.

Synchronised LCM Displays
Touch one to wake up all the screens and view a rich set of information

System Information
Errors
Warnings
Port Stats
PoE Power
Throughput
* Background noise level: 27.5 dBa



Ubiquiti Extended Warranty

Ubiquiti currently offers 1 year standard manufacturer warranty on equipment purchased through official UK distributors.

In the unlikely event that you have any issues with your Ubiquiti product within the 1 year of manufacturer warranty, please contact your account manager in the first instance. Our technical team will do everything they can to find a resolution to your problem. If a fix cannot be provided, then an RMA will need to be registered via the Ubiquiti Reseller Portal.

On all purchases made through Comms Express, we offer our customers options to upgrade the standard manufacturer warranty to a 3 or 5 year advanced hardware replacement.

Available warranty options:





 

Powerful Enterprise Switch Models

The 16-Port EdgeSwitch™delivers the forwarding capacity to simultaneously process traffic on all ports at line rate without any packet loss. Total non-blocking throughput: up to 18 Gbps




Model: ES-16-150W 
(16) Gigabit RJ45 Ports
(2) SFP Ports
(1) Serial Console Port
Non-Blocking Throughput: 18 Gbps
Switching Capacity: 36 Gbps
Forwarding Rate: 26.78 Mpps
Maximum Power Consumption: 150W
Supports POE+ IEEE 802.3at/af and 24V Passive PoE
Rackmountable with Rack-Mount Brackets (Included)



Enterprise-Class Features

The EdgeSwitch™supports an extensive suite of advanced Layer-2 switching features and protocols, and also provides Layer-3 routing capability.







 


Optical Fibre Backhaul

The EdgeSwitch provides fibre connectivity options for your growing networks. Two SFP ports provide uplinks of up to 1 Gbps..




 







Convenient PoE+ Support

The EdgeSwitch™features auto-sensing IEEE 802.3af/at and 24V passive PoE to power multiple devices on the network.






Advanced UI

The comprehensive UI is easy to learn and allows administrators to configure and monitor features in a graphical user interface. For advanced users, a Command-Line Interface (CLI) is available through telnet and SSH.

Ubiquiti Extended Warranty

Ubiquiti currently offers 1 year standard manufacturer warranty on equipment purchased through official UK distributors.

In the unlikely event that you have any issues with your Ubiquiti product within the 1 year of manufacturer warranty, please contact your account manager in the first instance. Our technical team will do everything they can to find a resolution to your problem. If a fix cannot be provided, then an RMA will need to be registered via the Ubiquiti Reseller Portal.

On all purchases made through Comms Express, we offer our customers options to upgrade the standard manufacturer warranty to a 3 or 5 year advanced hardware replacement.

Available warranty options:

 

Design For Surveillance
Crafted for CCTV, Zyxel introduces the brand-new GS1300 unmanaged switch for surveillance applications.

New outlook

Coated in titanium grey, the GS1300 excels with an eye-catching identity dedicated for surveillance Switch. On top of the conventional unmanaged switch, GS1300 comes with special design for CCTV adoption.



Easy for long-distance deployment

The GS1300 series overcomes the 100 meter limitation of Ethernet, and fulfills the need to deploy IP camera or powered devices using existing Cat 5e cable to distant locations. By toggling the DIP switch to turn on the extended-range mode, instantly achieve distant deployments up to 250 meters. Save your money and effort with simply one PoE Switch.




High power budget, intuitive front panel design

The GS1300 series includes 3 models with a range of large power budgets from 130 W to 250 W accommodating the requirement for powering up multiple IP cameras. The intuitive LED indicator on the front panel allows inspecting real-time PoE status.



Best fit for surveillance installation

Without the use of an adaptor, the internal power supply design is suitable for mounting onto server racks allowing more freedom and utilization of space.




Technical Specification

  GS1300-10HP GS1300-18HP GS1300-26HP Model Product name 8-port GbE Unmanaged PoE Switch with GbE Uplink 16-port GbE Unmanaged PoE Switch with GbE Uplink 24-port GbE Unmanaged PoE Switch with GbE Uplink Switch class Unmanaged Unmanaged Unmanaged Port Density Total port count 10 18 26 100/1000 Mbps 9 17 24 Gigabit SFP 1 1 2 Configurable extended range ports 2 4 4 PoE PoE ports 8 16 24 Total PoE budget (watt) 130 170 250 PoE 802.3at Yes Yes Yes Performance Switching capacity (Gbps) 20 36 52 Forwarding rate (Mpps) 14.8 26.7 38.7 Packet buffer (byte) 525 K 525 K 525 K MAC address table 8 K 8 K 8 K Power Input 100 - 240 V AC, 50/60 Hz 100 - 240 V AC, 50/60 Hz 100 - 240 V AC, 50/60 Hz Max. power consumption (watt) 155.8 205.7 301.9 Physical Specifications Dimensions (WxDxH)(mm/in.) 267 x 162 x 44 /
10.51 x 6.38 x 1.73 330 x 230 x 44 /
12.99 x 9.06 x 1.73 441 x 270 x 44 /
17.36 x 10.63 x 1.73 Weight (kg/lb.) 1.65/3.64 2.31/5.09 3.57/7.87 Included accessories Power cord, Wall-mount kit, Rack mounting kit Power cord, Rack mounting kit Power cord, Rack mounting kit Environmental Specifications Operating Temperature
-20°C to 50°C
-4°F to 122°F

Humidity
5% to 95%
(non-condensing) Temperature
-20°C to 50°C
-4°F to 122°F

Humidity
5% to 95%
(non-condensing) Temperature
-20°C to 50°C
-4°F to 122°F

Humidity
5% to 95%
(non-condensing) Storage Temperature
-40°C to 70°C
-40°F to 158°F

Humidity
5% to 95%
(non-condensing) Temperature
-40°C to 70°C
-40°F to 158°F

Humidity
5% to 95%
(non-condensing) Temperature
-40°C to 70°C
-40°F to 158°F

Humidity
5% to 95%
(non-condensing) MTBF (hr) 394,567 378,972 347,760 Heat dissipation (BTU/hr) 531.278 701.437 1,029.479 Acoustic noise @ 25°C (dBA) 44 48 48

Just For Surveillance
Crafted for CCTV, Zyxel introduces the brand-new GS1350 smart managed switch for surveillance applications

New outlook

Coated in titanium grey, the GS1350 excels with an eye-catching identity dedicated for surveillance Switch.



Specialized PoE software features for surveillance

Auto Camera recovery detects and recovers failed IP cameras and powered devices automatically with customizable granular parameters suitable for any types of devices and scenarios.

Continuous PoE delivers nonstop power to keep cameras in operation, even if switch under-goes maintenance for firmware or configuration updates, significantly reducing reboot time.


Easy for long-distance deployment

Traditionally, PoE switch delivers power and data within the distance of the 100 meter limitation. The GS1350 series fulfills the need to deploy IP camera or power devices using existing Cat 5e cable to distant locations. By enabling extended-range mode, instantly achieve distant deployments up to 250m. Save your money and effort with simply one PoE.


High power budget, intuitive front panel design

The GS1350 series includes four models with large power budgets of up to 375 W accommodating the requirement for powering up multiple IP cameras. The intuitive LED indicator on the front panel allows inspecting real-time PoE status. In addition, the one-touch “Restore” button on GS1350 Series helps effortless recovery from misconfigurations.


Unique hardware, robust design
Stabilized power - Filters electrical noise and surge to ensure supplying stable power to PoE and the system.
Selected power supply - 2X Surge and ESD protection.
Isolated Circuit Design - Provides protection to isolate power surges from Ethernet and power supply.
Intelligent System Monitor - Keeps the system operational from anomalies.
Patented Ethernet Protection - 4X Surge protection and 2X ESD resistant.
All specifications are subject to change without notice

Technical Specifications

  GS1350-6HP GS1350-12HP GS1350-18HP GS1350-26HP Model Product name 5-port GbE Smart Managed PoE Switch with GbE Uplink 8-port GbE Smart Managed PoE Switch with GbE Uplink 16-port GbE Smart Managed PoE Switch with GbE Uplink 24-port GbE Smart Managed PoE Switch with GbE Uplink Switch class Smart Managed Smart Managed Smart Managed Smart Managed Port Density Total port count 6 12 18 26 100/1000 Mbps 5 10 16 24 Gigabit SFP 1 2 - - Gigabit combo (RJ-45/SFP) - - 2 2 Configurable extended range ports 5 8 16 16 PoE PoE ports 5 8 16 24 Total PoE budget (watt) 60 130 250 375 PoE Standard 802.3af/at
802.3bt (port 1-2) 802.3af/at 802.3af/at 802.3af/at Performance Switching capacity (Gbps) 12 24 36 52 Forwarding rate (Mpps) 8.9 17.8 26.7 38.7 Packet buffer (byte) 525 K 525 K 525 K 525 K MAC address table 8 K 8 K 8 K 8 K Power Input 52 V - 57 V DC 100 - 240 V AC, 50/60 Hz 100 - 240 V AC, 50/60 Hz 100 - 240 V AC, 50/60 Hz Max. power consumption (watt) 72 160.3 300.9 448.9 Physical Specifications Dimensions (WxDxH)(mm/in.) 193 x 84 x 26 /
7.6 x 3.31 x1.02 267 x 162 x 44 /
10.51x 6.38 x1.73 330 x 230 x 44 /
12.99 x 9.06 x1.73 441 x 270 x 44 /
17.36 x10.63 x 1.73 Weight (kg/lb.) 0.41/0.9 1.63/3.59 2.42/5.34 3.58/7.89 Included accessories Power adapter, Wall-mount kit Power cord, Rack mounting kit Power cord, Rack mounting kit Power cord, Rack mounting kit ESD/Surge Protections Ethernet port surge protection 4 KV 4 KV 4 KV 4 KV Power supply surge protection: Line-GND 4 KV 4 KV 4 KV 4 KV Power supply surge protection: Line-Line 2 KV 2 KV 2 KV 2 KV Ethernet port ESD protection (air/contact) 15 KV/8 KV 15 KV/8 KV 15 KV/8 KV 15 KV/8 KV Environmental Specifications Operating Temperature
-20°C to 50°C
-4°F to 122°F

Humidity
5% to 95%
(non-condensing) Temperature
-20°C to 50°C
-4°F to 122°F

Humidity
5% to 95%
(non-condensing) Temperature
-20°C to 50°C
-4°F to 122°F

Humidity
5% to 95%
(non-condensing) Temperature
-20°C to 50°C
-4°F to 122°F

Humidity
5% to 95%
(non-condensing) Storage Temperature
-40°C to 70°C
-40°F to 158°F

Humidity
5% to 95%
(non-condensing) Temperature
-40°C to 70°C
-40°F to 158°F

Humidity
5% to 95%
(non-condensing) Temperature
-40°C to 70°C
-40°F to 158°F

Humidity
5% to 95%
(non-condensing) Temperature
-40°C to 70°C
-40°F to 158°F

Humidity
5% to 95%
(non-condensing) MTBF (hr) 2,021,885.87 1,065,025.45 1,699,692.18 888,495 Heat dissipation (BTU/hr) 245.52 546.62 1,026.07 1,530.75 Acoustic noise @ 25°C (dBA) 0 (Fanless) 27.3 39 40.1

TRENDnet's 16-Port Industrial Gigabit PoE+ DIN-Rail Switch, model TI-PG160, has sixteen gigabit PoE+ ports with a 240W PoE power budget. 

Users are able to connect sixteen PoE+ devices to the industrial PoE switch, while still providing two gigabit ports for additional network connections. 

The industrial PoE switch is equipped with an IP30 rated metal enclosure, designed to withstand a high degree of vibration and shock, while operating within a wide temperature range of -40°C to 75°C for industrial environments.


Key Features:

16 x Gigabit PoE+ ports
240W PoE power budget
32Gbps switching capacity
Hardened IP30 rated metal switch
Includes DIN-rail and wall mounts
Operating temperature range of -40°C to 75°C
Redundant power inputs with overload current protection
Alarm output triggered by power failure
Power supply sold separately (models: TI-S24048, TI-S48048)



Datasheets / User Manuals / Quick Start Guides can be downloaded from our Documentation tab (above)

TRENDnet's Industrial Gigabit PoE+ DIN-Rail Switches provide network connectivity in rugged environments, while saving you on installation costs and setup time using Power over Ethernet technology. 

Installers and integrators can save on equipment costs and reduce installation time with TRENDnet's Industrial Gigabit PoE+ DIN-Rail Switches by delivering up to 30W per port of PoE power and data over existing Ethernet cables. 

With PoE technology inside these industrial PoE+ switches, users will only need one set of cables to deliver both data and power. 


Key Features:

14 x Gigabit PoE+ ports
2 x Gigabit SFP slots
240W PoE power budget
32Gbps switching capacity
Hardened IP30 rated metal switch
Includes DIN-Rail mount and wall mount brackets
Wide operating temperature range of -40°C to 75°C
Multiple inputs provide redundant power with overload current protection
Alarm output triggered by power failure
Power supply sold separately (model: TI-S48048)

Network PoE devices to this hardened industrial PoE+ switch, such as high-power wireless access points, IP cameras, VoIP phone systems, IPTV decoders, access controls, and more.

The Industrial Gigabit PoE+ DIN-Rail Switches each feature a rugged IP30 rated metal enclosure, designed to withstand a high degree of vibration and shock, while operating in both high and low temperatures for industrial environments within -40°C to 75°C. 

Our hardened industrial PoE+ switch models feature copper Gigabit PoE+ ports for high-speed device connections, and SFP slots that support 1000Base-FX modules for long distance fibre networking applications.


Datasheets / User Manuals / Quick Start Guides can be downloaded from our Documentation tab (above)

TRENDnet’s 16-Port Gigabit PoE+ Switch, model TPE-TG160g, offers 16 x Gigabit PoE+ ports, a 32 Gbps switching capacity, and a PoE power budget of 246 Watts. This rugged metal switch comes with a rack mount kit.

Features: 
16 x Gigabit PoE+ ports
246 W PoE budget
32 Gbps switching capacity
Sturdy metal switch
Rack mount brackets included
Lifetime Warranty*
 

PoE Camera Flexibility
The switch recognizes non-PoE, PoE (15.4 W), and PoE+ (30 W) cameras (or other PoE devices) and supplies the required amount of power automatically. Full PoE Power
The large 246 Watt PoE power budget supplies full PoE power to every port, thereby maximizing the number of allowable connected PoE devices.

Gigabit Networking
All Gigabit ports produce a 32 Gbps switching capacity and support Jumbo Frames up to 10 KB.


  PoE+
Supplies up to 30 Watts of power per port with a 246 Watt PoE budget Ports
16 x Gigabit PoE+ ports Switching Capacity
32 Gbps switching capacity Jumbo Frame
Sends Jumbo Frames (up to 10 KB) for increased performance Energy Savings
Embedded GREENnet technology reduces power consumption Rack Mountable
Rack mountable metal enclosure with included mounting kit LED Indicators
LED indicators convey port status

Features:

16 x Gigabit PoE+ ports
4 x Shared Gigabit ports (RJ-45 or SFP)
185W PoE power budget
Easy-to-use web-based management interface
Supports IPv6, LACP, VLAN, QoS, and IGMP Snooping
Bandwidth control per port
Private and Voice VLAN support
Smart Fan
40Gbps switching capacity
IEEE 802.1p QoS with queue scheduling support
TRENDnet’s 16-Port Gigabit Web Smart PoE+ Switch, model TPE-1620WS, delivers advanced management features with a 40Gbps switching capacity. This rack mountable, IPv6 ready switch comes with an intuitive web-based interface. Advanced traffic management controls, troubleshooting, and SNMP monitoring make this a powerful solution for SMB networks. The TPE-1620WS provides 16 gigabit PoE+ ports with a total power budget of 185W, and four shared gigabit ports (RJ-45 or SFP). The PoE+ standard supplies up to 30W of power per port for devices such as high power wireless access points, PTZ (Pan Tilt Zoom) Internet cameras, and VoIP telephony systems.

Web Smart Management
Provides an easy-to-use web-based GUI management for reduced switch configuration complexity and offers a combination of SMB management features for easy deployment. Integration Flexibility
Managed features include access control lists, VLAN, IGMP snooping, QoS, RMON, SNMP trap, and syslog for monitoring and flexible network integration PoE Power
A 185W PoE power budget supplies to Power over Ethernet devices. Network Example



Hardware Design
Features 16 gigabit PoE+ ports, 4 shared gigabit ports (RJ-45 or SFP) , a 40Gbps switching capacity, a built-in power supply, and includes rackmount brackets. PoE Power
Supplies up to 30W of PoE+ power per port with a 185W power budget IPv6 Ready
This switch supports IPv6 configuration and IPv6 neighbour discovery. Traffic Management
A broad range of network configurations are supported by: 802.3ad link aggregation, Asymmetric VLAN, 802.1Q VLAN, Voice VLAN, RSTP, MSTP, Loopback Detection, GVRP, 802.1p Class of Service (CoS), port bandwidth management, and QoS queue scheduling. Troubleshooting
A convenient cable diagnostic test and traffic statistics aid in network troubleshooting Access Control
Features such as ACL, SSL, MAC/port filtering, 802.1X, TACACS+, and RADIUS are compatible with layered access controls Monitoring
RMON, SNMP, SNMP Trap, and Port Mirroring support administrator monitoring solutions Contents

TPE-1620WS
Quick Installation Guide
CD-ROM (Utility & User’s Guide)
Power cord (1.8m/6 ft.)
Rack mount kit

Dedicated for Surveillance & SMB Networking



6kV lightning Protection

GE&SFP uplink ports

Smart PoE Supply  

4 modes

150W Power Supply   GE & SFP uplink ports, Large Buffer of Nearly 3M

With one 10/100/1000 Mbps combo SFP slot, the switch can meet the current demand for uplink bandwidth of Gigabit WLAN and HD digital surveillance. Working with Tenda optical fibermodule TEG311SM, the switch supports a maximum transmission distance up to 20km.

6KV Excellent Lightning Protection

The switch offers various safety and protection types, including 6 kV lightning protection, PSE short-circuit protection, PoE overload protection, surge current protection etc, and these greatly protect the switch from being damaged by thunderstorm. Besides, it supports wide voltage input, AC?100-240V~50/60Hz.

Excellent lightning Protection

TEF1106P-4-63W supports professional lightning protection of 6KV for uplink ports & 4KV for power, which can protect the switch from the inductive lightning strike coming from the thunderstorm weather.

Cascading with 6 Devices, Can Support IP Surveillance Project of up to 96 Cameras

In the number of about 100 terminals accessed to the network, cascading 6 devices through the G1?G2/SFP2can achieve up to 96-channel monitoring, according to the project , it supports 300W/500W IP Caccessed and ensure stable video transmission without breaking up.If the both ends of devices are connected to the NVR, the video can be watched locally.

4 Modes for Different Networks

Standard mode, Port-based Priority mode, Port-based VLAN mode and Extend mode make TEF1118P-16-150W be able to deal with different networks?special for small & Medium-sized IP surveillance & WI-FI coverage project.

The Tenda TEF1218P switch supports 16 PoE ports, which can supply power to most powered devices through 8-core Ethernet cable and the total PoE power can be up to 230W while each PoE port can support the maximum PoE power of 40W.

Lead security transmission power supply to a new height
TEF1218P-16-250W 16FE+2GE+2SFP(Combo) Web Smart PoE Switch
6KV Port Lightning Protection
long Distance Transmission
Maximum PoE Output Power 230W
PoE Power Up to 40W for each PoE Port
6KV Lightning Protection PoE switch is the real monitoring private switch

For surveillance projects, cameras are often installed in an outdoor environment or a higher position, which also increases the camera and PoE switches probability of a lightning shock. This could result in the individual equipment getting damaged or lead to a whole local area network (LAN) paralysis. The Tenda TEF12 series switches have a professional lightning protection design – up to 6kV surge protection, with two levels of protection design respectively, effectively preventing the power of lightning from damaging the cable, which is the equivalent to giving the entire network system a security fence. The test standard is much higher than the national CCC request. In thunderstorm weather, it can also provide monitoring network stability, reliable service and maintain the images transmission.

Up to 250 meters long distance transmission beyond hundred meters transfer limit

Due to the complex monitoring environment, when making cabling and networking, it’s very often to encounter the problem of inadequate network transmission distance.

The distance of each camera terminal to the monitoring centre is different, some only a few meters, some hundred metres, while others can be kilometres away. The Tenda TEF12 series PoE monitoring switches exclusive patent network extension technology, uses the common existing twisted pair, can support 250 metres data transmission, breaks the existing twisted pair hundred metres transmission limit; Provides a gigabit linked SFP port and can meet the demand of transmission up to 250 metres.

The PoE total power is 230W, 16 port power supply full load is enough

The unit’s total PoE power is 230W. It can provide 16 ports of full PoE power supply; One Port PoE supply is 40W, the units PoE power can meet the full requirements of a network. With an eight core power supply design, the network power consumption is reduced to half, highly reducing the power loss over the inferior cable, making sure the camera gets electricity and stability.


The PoE total power is 230W, 16 port power supply full load is enough

The unit’s total PoE power is 230W. It can provide 16 ports of full PoE power supply; One Port PoE supply is 40W, the units PoE power can meet the full requirements of a network. With an eight core power supply design, the network power consumption is reduced to half, highly reducing the power loss over the inferior cable, making sure the camera gets electricity and stability.

16 Port Fast Ethernet Smart POE Switch

Smart managed switches are developed by Hikvision, featuring in easy management and maintenance. You can easily deploy, monitor and expand your surveillance system anytime and anywhere with our software platforms. You can view the network topology, monitor the health of the network and receive device alarms in real time, which greatly reduces the cost of network operation and maintenance.




Key Features • 16 × 100 Mbps PoE RJ45 ports, 2 × gigabit combos.

• IEEE 802.3at/af standard for PoE ports.

• Network topology management, alarm push, network health monitor.

• 6 KV surge protection for PoE ports.

• AF/AT camera can reach up to 300 m in extend mode.






 



Full specification and details can be found in the Product Datasheet PDF file

A user quick start guide can be found in the User guide PDF file

A user manual can be found in the User Manual PDF file

16 Port Fast Ethernet Smart POE Switch

Smart managed switches are developed by Hikvision, featuring in easy management and maintenance. You can easily deploy, monitor and expand your surveillance system anytime and anywhere with our software platforms. You can view the network topology, monitor the health of the network and receive device alarms in real time, which greatly reduces the cost of network operation and maintenance.




Key Features • 16 × 100 Mbps PoE RJ45 port, 2 × gigabit combo.

• IEEE 802.3at/af standard for PoE ports.

• Network topology management, alarm push, network health monitor.

• 6 KV surge protection for PoE ports.

• AF/AT camera can reach up to 300 m in extend mode.


Full specification and details can be found in the Product Datasheet PDF file

A user quick start guide can be found in the User guide PDF file

A user manual can be found in the User Manual PDF file

16 Port Gigabit Smart POE Switch

Smart managed switches are developed by Hikvision, featuring in easy management and maintenance. You can easily deploy, monitor and expand your security system anytime and anywhere with our software platforms. You can view the network topology, monitor the health of the network and receive device alarms in real time, which greatly reduces the cost of network operation and maintenance.




Key Features • 16 × gigabit PoE ports, and 2 × gigabit fiber optical ports.

• IEEE 802.3at/af standard for PoE ports.

• Network topology management, alarm push, network health monitor.

• 6 KV surge protection for PoE ports.

• AF/AT camera can reach up to 300 m in extend mode.

• PoE watchdog to auto detect and restart the cameras that do not respond.

• Various layer 2 management protocols such as STP/RSTP, VLAN, link aggregation, SNMP, QoS and so on.


Full specification and details can be found in the Product Datasheet PDF file

A user quick start guide can be found in the User guide PDF file

16 Port Gigabit Unmanaged POE Switch

DS-3E0518P-E switches are layer 2 Gigabit PoE unmanaged switches, providing 16 Gigabit PoE ports, one 10/100/1000 Mbps RJ45 port, and one 10/100/1000 Mbps SFP fiber optical port. The switches provide advanced PoE technology and connect other devices with high performance. Meanwhile, all Gigabit ports guarantee stable transmission of data.




Feature and Function • 16 × Gigabit PoE ports, 1 × Gigabit RJ45 port, and 1 × Gigabit SFP fiber optical port.

• IEEE 802.3at/af standard.

• IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, and IEEE 802.3z standard.

• 6 KV surge protection for PoE ports.

• PoE power management.

• Gigabit network access.

• Wire-speed forwarding and non-blocking design.

• Store-and-forward switching.

• Solid high-strength metal shell.


Full specification and details can be found in the Product Datasheet PDF file

A user quick start guide can be found in the User guide PDF file

16 Port Gigabit Unmanaged POE Switch

DS-3E0520HP-E switches are layer 2 Hi-PoE switches, providing advanced PoE power supply technology and Gigabit networks design on the basis of highperformance access to ensure stable data upload. The switches support Hi-PoE, long range, port isolation, and PoE watchdog function.




Key Features • 12 × gigabit PoE ports, 4 × gigabit Hi-PoE ports, 2 × gigabit RJ45 ports, and 2 × gigabit fiber optical ports. • IEEE 802.3at/af/bt standard for Hi-PoE ports (Max. 90 W PoE output). • IEEE 802.3at/af standard for PoE ports (Max. 30 W PoE output). • IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab, and IEEE 802.3z standard. • 6 KV surge protection for PoE ports. • Up to 300 m long-range transmission. • PoE watchdog to auto detect and restart the cameras that do not respond. • Port isolation to improve network security. • Gigabit network access design. • Wire-speed forwarding. • Store-and-forward switching. • Solid high-strength metal shell.


Full specification and details can be found in the Product Datasheet PDF file

A user quick start guide can be found in the User guide PDF file

The NETGEAR 16-Port PoE+ Gigabit Ethernet Plus Switch delivers essential business networking features and powers PoE+ devices like VoIP phones, IP cameras, and more.

Gigabit Ethernet: 16 ports provide up to 1000 Mbps of dedicated, non-blocking bandwidth each
PoE+ Support: 15 PoE+ ports provide a total of 231W of power so you can power and connect your devices with a single wire.
Advanced PoE Controls: Manage PoE prioritization, PoE power limit per port, PoE scheduling and more for simple control over all PoE-powered devices
Non-Blocking Switching: 10Gbps (10/100/1000 Mbps) line rate fabric ensures congestion-free connectivity to your devices
Versatile Mounting Options: Install your switch on your desktop or mount it to your wall with the hardware provided in the box
Fanless Design: Silent operation makes this switch perfect for noise-sensitive environments




New and improved Plus switches

Along with the already great Plus features, the GS316EPP enhances your business networking experience even more with exciting new features: advanced PoE controls with uninterrupted PoE and more, business-friendly GUI, simplified VLAN and QoS set-up, and multi-language support.

Meet Your Business Needs

This Plus Switch is packed with network-optimizing features including VLANs, QoS, and IGMP Snooping at an affordable price.

  Power for PoE+ Devices

Deliver power and network connectivity to all your PoE+ devices, including wireless access points, door locks, and many more.

Easy Management

Setup is simple - just plug and play. Configure your network using a user-friendly web GUI.

 

Product Features Sixteen Gigabit Ethernet ports with eight PoE+ porrts and four SFP slots.

IEEE 802.3af/at PoE compliant.

Up to 30W per port (total power budget: 240W) for powering PoE-enabled devices.

PoE powered devices (PD) alive check to enhance the reliability of the network.

Built for harsh environments with -40~75°C wide temperature range.

Industrial ruggedized design with IP30-rating aluminum alloy case.

Supports RSTP, MSTP, ERPS, LACP for network redundancy to ensure the network connection reliability.

Equipped with redundant power inputs (both Digital Input (DI) and Digital Output (DO)) and embedded protecting circuit to avoid damaging the switch.

Supports Storm Control to suppress a packet storm in a network (Storm Protection).

DHCP snooping to protect the integrity of legitimate DHCP server and its operations.

Supports SNMP v3, Access Control List (ACL), QoS, CoS, STP, 802.1Q VLAN, IPv4/IPv6, Port Trunk, IGMP v1/v2/v3 Snooping and Mirror.

USB console port for efficient configuration backup and restore and firmware upgrade.

40Gbps switch capacity.

16K MAC address table and jumbo frame support up to 16KB.

Fanless, compact size with DIN-Rail and wall mounting enabled design.