Zyxel Modules and Accessories

Direct Attached Cable

1m 10G

The NetBotz Room Monitor 755 provides integrated surveillance,sensing, access control, and advanced alerting for IT environmentsof all sizes where IT rack space is unavailable.

Integrated surveillance, sensing, access control and instant alerting for IT environments of all sizes where IT rack space is unavailable. Supports up to 4 HD cameras, 16 wired sensors, 47 wireless sensors and badged access for 2 rack doors.


Hot-pluggable with maximum flexibility Independent transceiver design provides the highest network maintenance flexibility. Transceivers can be freely added when required, and infrastructure upgrades or transceiver repairs can be done easily by just replacing the transceiver instead of the whole device.


No extra cabling cost to upgrade the fiber plant Traditional fiber optic networking requires two strands of fiber for sending and receiving signals to accomplish communications.

The bi-directional, dual-wavelength transceivers can establish communications over just one strand of fiber. Transmission capacity can be expanded immediately without additional cost laying new fiber.


Supports digital diagnostics monitoring interface (DDMI) DDMI enables the switch to access operating parameters within the fiber link. This includes digital features such as soft control and monitoring of SFP I/O signals. In addition, the DDMI functionality enables the capability to implement digital alarms and warnings.

The Zyxel PoE12-30W-GB0101F is a sleek, compact 2-port, 2.5 GbE PoE+ injector engineered for delivering both power and data to high-performance network devices using existing Cat-5e cabling. Ideal for Wi-Fi 6/7 access points, PTZ cameras, and advanced terminals, it supports up to 30 W of PoE power budget and reach.

Key Features: Dual 2.5 GbE-rated RJ-45 ports for high-speed uplink and PoE delivery
Supports IEEE 802.3at PoE+ with up to 30 W power budget
Backward-compatible with 100 Mbps and 1 Gbps Ethernet
Plug-and-play design with desktop or wall-mount flexibility
Built-in ESD (8 kV air/6 kV contact) and surge (±4 kV) protection
Wide input voltage range (AC 100-240 V, 50/60 Hz) and low idle consumption
Overview & Performance Designed for robust network environments, the PoE12-30W delivers stable 2.5 Gb/s throughput while simultaneously powering devices. Its IEEE 802.3bz standard support allows seamless integration with Cat-5e infrastructure, avoiding costly cable upgrades.

Power Delivery & Compatibility Fully compliant with PoE+ (802.3at), this injector offers intelligent power negotiation and up to 30 W output—sufficient for most enterprise-grade access points and security cameras. It ensures broad interoperability with standard PoE endpoints.

Installation & Protection No software configuration needed—simply plug it into a non-PoE switch and connect your PoE device. The compact form factor can be mounted on a desk or wall. Its enhanced surge and ESD protection safeguards critical equipment from electrical disturbances.

Physical & Environmental Specs Measuring just 140 x 45.5 x 30 mm and weighing 144 g, the unit supports an operating range of -10 °C to 45 °C with non-condensing humidity. MTBF is rated at approximately 1.87 million hours, ensuring long-term reliability.

The ZyXEL transceiver family follows industry standards to assure compatibility with switches from other manufacturers without barrier set by proprietary technologies. Independent transceiver design provides the highest network maintenance flexibility. Transceivers can be freely added when required, and infrastructure upgrades or transceiver repairs can be done easily by just replacing the transceiver instead of the whole device.

Features:

Standard-based design assures compatibility
Hot-swappable design facilitates network maintenance
Bi-directional transceivers maximizes usage of existing fibre plant
Supporting Digital Diagnostics Monitoring Interface (DDMI) SFP enhances management capability
Standard-based design assures compatibility The ZyXEL transceiver family follows industry standards to assure compatibility with switches from other manufacturers without barrier set by proprietary technologies.


Hot-swappable design facilitates network maintenance Independent transceiver design provides the highest network maintenance flexibility. Transceivers can be freely added when required, and infrastructure upgrades or transceiver repairs can be done easily by just replacing the transceiver instead of the whole device.


Bi-directional transceivers maximizes usage of existing fibre plant Traditional fibre optic networking requires two strands of fibre to accomplish communications, in which one strand is reserved for sending signals, while the other is for receiving. On the other hand, bi-directional, dual-wavelength transceivers can establish communications over just one strand of fibre by using two separate optical wavelengths: one receives and the other transmits signals. Transmission capacity can be expanded immediately without additional cost laying fibre.


Supporting Digital Diagnostics Monitoring Interface (DDMI) SFP enhances management capability The enhanced digital interface enables a real time link to be established between the switch and the SFP transceiver. This enables the switch to access operating parameters within the fibre link. This includes digital features such as soft control and monitoring of SFP I/O signals.

Standard-based design assures compatibility

The ZyXEL transceiver family follows industry standards to assure compatibility with switches from other manufacturers without barrier set by proprietary technologies.

Comprehensive portfolio for different connectivity demands

With ZyXEL’s comprehensive Fast, Gigabit and 10 Gigabit transceiver product range, also Direct Attached Cable 1 M/3 M, users can just plug the proper model onto the network to extend the physical coverage.

Hot-swappable design facilitates network maintenance

Independent transceiver design provides the highest network maintenance flexibility. Transceivers can be freely added when required, and infrastructure upgrades or transceiver repairs can be done easily by just replacing the transceiver instead of the whole device.

Bi-directional transceivers maximises usage of existing fibre plant

Traditional fibre optic networking requires two strands of fibre to accomplish communications, in which one strand is reserved for sending signals, while the other is for receiving. On the other hand, bi-directional, dual-wavelength transceivers can establish communications over just one strand of fibre by using two separate optical wavelengths: one receives and the other transmits signals. Transmission capacity can be expanded immediately without additional cost laying new fibre.
Supporting Digital Diagnostics Monitoring Interface (DDMI) SFP enhances management capability
The enhanced digital interface enables a real time link to be established between the switch and the SFP transceiver. This enables the switch to access operating parameters within the fibre link. This includes digital features such as soft control and monitoring of SFP I/O signals.
In addition, the DDMI functionality enables the capability to implement digital alarms and warnings. This feature ensures that the business can be proactive in preventative maintenance of the network and ensure business continuity.

Reliable Transceiver Modules for Different Connectivity Demands

Hot-pluggable with maximum flexibility

Independent transceiver design provides the highest network maintenance flexibility. Transceivers can be freely added when required, and infrastructure upgrades or transceiver repairs can be done easily by just replacing the transceiver instead of the whole device.

No extra cabling cost to upgrade the fiber plant

Traditional fiber optic networking requires two strands of fiber for sending and receiving signals to accomplish communications. The bi-directional, dual-wavelength transceivers can establish communications over just one strand of fiber. Transmission capacity can be expanded immediately without additional cost laying new fiber.

Supports digital diagnostics monitoring interface (DDMI)

DDMI enables the switch to access operating parameters within the fiber link. This includes digital features such as soft control and monitoring of SFP I/O signals. In addition, the DDMI functionality enables the capability to implement digital alarms and warnings.

Complete fiber accessory portfolio

We provide multiple options including 1G SFP, 10G SFP+ and 10G DAC cables for different installation requirements.

Zyxel XGN100C v2 10G RJ45 PCIe Network Card The Zyxel XGN100C v2 10G RJ45 PCIe Network Card is designed for users who demand high-speed, reliable, and flexible connectivity. Built with compatibility in mind, it supports multiple speeds up to 10Gbps, making it ideal for gaming, content creation, and data-intensive applications.

Key Features 10G/5G/2.5G/1G/100 Mbps backward compatibility
PCI Express x4 interface for high-speed performance
Equipped with heatsink for stable operation
Supports QoS, Jumbo Frames, and VLAN Tagging
Includes both full-height and low-profile brackets
LED indicators for speed and activity monitoring
Compatible with Windows and Linux operating systems
Seamless Multi-Gigabit Performance Enjoy fast file transfers, smooth video streaming, and responsive gaming with speeds up to 10Gbps. The XGN100C v2 ensures backward compatibility across multiple standards, providing flexibility in diverse network environments.

Optimized Design The card features a robust heatsink to maintain stable performance under heavy workloads. Flexible mounting options with both standard and low-profile brackets make installation easy in different PC cases.

Advanced Networking Functions With support for QoS, Jumbo Frames, and VLAN tagging, the XGN100C v2 enhances efficiency and ensures smooth data management across networks. LED indicators keep you informed on connection speed and activity status.

Reliable Compatibility Supporting Windows and Linux platforms, this PCIe card integrates easily into a wide range of systems, delivering dependable high-speed wired connectivity for professional and personal use.

Reliable Transceiver Modules for Different Connectivity Demands

Hot-pluggable with maximum flexibility

Independent transceiver design provides the highest network maintenance flexibility. Transceivers can be freely added when required, and infrastructure upgrades or transceiver repairs can be done easily by just replacing the transceiver instead of the whole device.

No extra cabling cost to upgrade the fiber plant

Traditional fiber optic networking requires two strands of fiber for sending and receiving signals to accomplish communications. The bi-directional, dual-wavelength transceivers can establish communications over just one strand of fiber. Transmission capacity can be expanded immediately without additional cost laying new fiber.

Supports digital diagnostics monitoring interface (DDMI)

DDMI enables the switch to access operating parameters within the fiber link. This includes digital features such as soft control and monitoring of SFP I/O signals. In addition, the DDMI functionality enables the capability to implement digital alarms and warnings.

Complete fiber accessory portfolio

We provide multiple options including 1G SFP, 10G SFP+ and 10G DAC cables for different installation requirements.