Tenda PoE Switches

The TEF1105P-4-63W is a Tenda PoE switch that offers 5 10/100 Mbps Base-TX RJ45 ports. Up to 250 meters long distance transmission, beyond hundred meters transfer limit. 6KV lightning protection PoE switch is the real monitoring private switch. Ports 1-4 support IEEE 802.3at and IEEE 802.3af PoE standard. It provides 30W maximum PoE output a single port and 58W for the whole device.

6KV lighting protection PoE switch is the real monitoring private switch

For surveillance projects, AP or IP cameras are often installed in an outdoor environment or a higher position, which also increases the risk of cameras and PoE switches probability of a lightning shock. This results in the individual equipment getting damaged or could lead to a whole local area network (LAN) paralysis.

The Tenda TEF11 series switches have the professional lightning protection design - up to 6kV surge protection, with two levels of protection design respectively, effectively preventing the power of lightning from damaging the cable, which is the equivalent to giving the entire network system a security fence. The test standard is much higher than the national CCC request. In thunderstorm weather, it can also provide monitoring network stability, reliable service and maintain the images transmission.

Up to 250 meters long distance transmission beyond hundred meters transfer limit

Due to the complex monitoring environment, when making cabling and networking, it is very common to encounter the problem of inadequate network transmission distance. The distance of each camera terminal to the monitoring centre is different, some only a few metres, some hundred metres, while others can be kilometres away. The Tenda TEF11 series PoE monitoring switches exclusive patent network extension technology, uses the common existing twisted pair, can support 250 metres data transmission, breaks the existing twisted pair hundred meters transmission limit.

58W PoE power supply simplified wiring

Ports 1-4 comply with the IEEE802.3af and IEEE802.3at power supply standards. The entire switch offers a maximum PoE power output of 58W, whereas each port offers a maximum PoE power output of 30W. The ports can be used to supply power to and exchange data with APs and IP cameras.

Dedicated for Surveillance With Uplink & NVR double uplink ports and QoS



6kV lightning Protection

250m Extend mode  

QoS

Dual uplink ports   Dual uplink port, more convenient for connecting Router and NVR

TEF1106P-4-63W is an unmanaged PoE switch with 2 uplink ports that can connect with Router & NVR. Compliant with IEEE 802.3at/af standards, it can identify PoE-powered devices intelligently. The switch supplies a maximum PoE power output of 63 W, and 30 W for a single port. TEF1106P-4-63W is an ideal choice for SMBs, supermarkets and restaurants with small-sized video surveillance requirement

Up to 250 meters long distance transmission under the Extend Mode?beyond hundred meters transfer limitation

Due to the complex monitoring environment, the distance from each terminal to the monitoring center is different, some even more than hundred meters. TEF1106P-4-63W can support 250 meters data transmission in the Extend mode, which can save the cost of your project with less devices used.

Excellent lightning Protection

TEF1106P-4-63W supports professional lightning protection of 6KV for uplink ports & 4KV for power, which can protect the switch from the inductive lightning strike coming from the thunderstorm weather.

QoS Priority design makes the key video data to be prioritized

1-2 ports support QoS Priority function, and it will prioritize them when meeting network congestion, which can ensure the network stable and fluent transmission of the surveillance video without breaking up.

Lead security transmission power supply to a new height

One-Key VLAN

If "VLAN mode" is enabled, Port 1-4 will be isolated respectively but can communicate with the port 5. Hardware DIP switch to isolate ports to prevent broadcast storm and defend against DHCP spoofing.

6KV lighting protection PoE switch is the real monitoring private switch

In real project, APs or cameras are usually installed in outdoor or a higher position, which also increases the camera and PoE switches the probability of lightning shock. The result is the individual equipment damaged, or lead to the whole local area network (LAN) paralysis.

Tenda TEF11 series switches have professional lightning protection design - up to 6KV port and power supply thunder prevents, with two levels of protection design respectively, effectively restrain the power of lightning from cable, which is equivalent to give the entire network monitoring system with a security fence, The test standard is much higher than the national CE request. In thunderstorms weather, it can also provide monitoring network stable and reliable services and protect the images transmission normally.

58W PoE power supply

Ports 1-4 comply with the IEEE802.3af and IEEE802.3at power supply standards. The entire switch offers a maximum PoE power output of 58W, whereas each port offers a maximum PoE power output of 30 W. The ports can be used to supply power to and exchange data with APs and IP cameras.

Dedicated for Surveillance With Uplink & NVR double uplink ports and QoS



6kV lightning Protection

One-key VLAN

250m Extend mode  

QoS

Dual uplink ports   Dual uplink port, more convenient for connecting Router and NVR

TEF1110P-8-63W is an unmanaged PoE switch with 2 uplink ports that can connect with Router & NVR. Compliant with IEEE 802.3at/af standards, it can identify PoE-powered devices intelligently. The switch supplies a maximum PoE power output of 58W, and 30 W for a single port. TEF1110P-8-63W is an ideal choice for SMBs, supermarkets and restaurants with small-sized video surveillance requirement.

Up to 250 meters long distance transmission under the Extend Mode, beyond hundred meters transfer limitation

Due to the complex monitoring environment, the distance from each terminal to the monitoring center is different, some even more than hundred meters. TEF1110P-8-63W can support 250 meters data transmission under the Extend mode, which can save the cost of your project with less devices used.

Excellent lightning Protection

TEF1106P-4-63W supports professional lightning protection of 6KV for uplink ports & 4KV for power, which can protect the switch from the inductive lightning strike coming from the thunderstorm weather.

QoS Priority design makes the key video data to be prioritized

1-2 ports support QoS Priority function, and it will prioritize them when meeting network congestion, which can ensure the network stable and fluent transmission of the surveillance video without breaking up.

One-key Port VLAN Setup

With Extend mode on, port 1-8 are isolated from each other, but can still communicate with the 2 uplink ports. These function can enable the switch to isolate broadcast storm, and improve LAN security and data transmission.

The TEF1109P-8-63W has network extension technology. Based on the original twisted pair, it can support up to 250 meters long distance transmission, breaking the hundred meters transfer limit. With 6KV lightning protection, it is the real monitoring private switch. Ports 1-8 support IEEE 802.3at and IEEE 802.3af PoE standard. It provides a maximum PoE output power of 30W to each port and 58W to the whole device.

Lead security transmission power supply to a higher level
TEF1109P-8-63W 9-Port 10/100Mbps Desktop Switch With 8-Port PoE
6KV Lightning Protection | long distance transmission
Maximum PoE Output Power 58W | PoE power up to 30W for each PoE port
Up to 250 meters long distance transmission, beyond hundred meters transfer limit

Due to the complex monitoring environment, when making cabling and networking, it’s very often to encounter the problem of inadequate network transmission distance. The distance of each camera terminal to the monitoring centre is different, some only a few meters, some hundred metres, while others can be kilometres away. The Tenda TEF11 series PoE monitoring switches exclusive patent network extension technology, uses the common existing twisted pair, can support 250 metres data transmission, breaks the existing twisted pair hundred metres transmission limit; Provides a gigabit linked SFP port and can meet the demand of transmission up to 250 metres.

6KV lighting protection PoE switch is the real monitoring private switch

For surveillance projects, cameras are often installed in an outdoor environment or a higher position, which also increases the camera and PoE switches probability of a lightning shock. This could result in the individual equipment getting damaged or lead to a whole local area network (LAN) paralysis. The Tenda TEF11 series switches have a professional lightning protection design – up to 6kV surge protection, with two levels of protection design respectively, effectively preventing the power of lightning from damaging the cable, which is the equivalent to giving the entire network system a security fence. The test standard is much higher than the national CCC request. In thunderstorm weather, it can also provide monitoring network stability, reliable service and maintain the images transmission.

Outstanding PoE Power Supply

Ports 1-8 support IEEE 802.3at and IEEE 802.3af PoE standard. It provides a maximum power supply of 30W to each port and 58W to the whole device.

Additional Features:
6KV Lighting protection
IEEE 802.3af/at
250m Transmission

Born for Small and Medium-sized HD IP Surveillance Projects



6kV lightning Protection

VLAN Button

Transmission Distance
up to 250m  

Large Packet Buffer

102W High Power   Transmission Distance up to 250m

With the extension technology,data can be transmitted through 250 meters cable which would be a cost-effective replacement for extenders and optical fibers.

Excellent Lightning Protection

The switch supports 6 kV lightning protection for uplink port, protecting the switch from thunderstorms and making it more stable.

Simple Port VLAN Setup

With VLAN Mode on, ports 1 to 8 are isolated from each other, enabling the switch to isolate broadcast storm, improving LAN security and data transmission.

Enjoy Super HD Video Screen

Equipped with 1024KB large packet buffer, it ensures smooth streaming even when eight HD IP cameras of 500W are working simultaneously.

Integrated with Smart Power Management Chip Makes the Switch Get Rid of Overload

It includes chips with smart power management function and integrated professional chip control algorithm, which can accurately calculate the output power. When the power of the receiving equipment exceeds the rated power (92W) of the PoE switch, the low priority port will automatically power off to avoid the over-run of the equipment and prolong the service life of the equipment.

Outstanding PoE Power Supply

Ports 1-8 support IEEE 802.3at and IEEE 802.3af PoE standard. It provides 30W maximum PoE output a single port and 92W the whole device.

The TEF1110P-8-102W has network extension technology. Based on the original twisted pair, it can support up to 250 meters long distance transmission, breaking the hundred meters transfer limit. With 6KV lightning protection, it is the real monitoring private switch. Ports 1-8 support IEEE 802.3at and IEEE 802.3af PoE standard. It provides a maximum power supply of 30W to each port and 99W to the whole device. Meanwhile, it provides dual gigabit uplink port to meet the needs of more equipment cascading and access.

TEF1110P-8-102W 8-Port10/100Mbps+2 Gigabit Desktop Switch With 8-Port PoE
6KV Port Lightning Protection | long distance transmission
Maximum PoE Output Power 99W | PoE power up to 30W for each PoE port
PoE+ and Dual Gigabit Uplink

Ports 1-8 support IEEE 802.3at and IEEE 802.3af PoE standard. Machine PoE maximum output power of 99W, single-port maximum output power of 30W. The two gigabit uplink ports are capable for cascade connection of more devices.

Up to 250 meters long distance transmission, beyond hundred meters transfer limit

Due to the complex monitoring environment, when making cabling and networking, it’s very often to encounter the problem of inadequate network transmission distance. The distance of each camera terminal to the monitoring centre is different, some only a few meters, some hundred metres, while others can be kilometres away.

The Tenda TEF11 series PoE monitoring switches exclusive patent network extension technology, uses the common existing twisted pair, can support 250 metres data transmission, breaks the existing twisted pair hundred metres transmission limit; Provides a gigabit linked SFP port and can meet the demand of transmission up to 250 metres.

6KV lighting protection PoE switch is the real monitoring private switch

For surveillance projects, cameras are often installed in an outdoor environment or a higher position, which also increases the camera and PoE switches probability of a lightning shock. This could result in the individual equipment getting damaged or lead to a whole local area network (LAN) paralysis.

The Tenda TEF11 series switches have a professional lightning protection design – up to 6kV surge protection, with two levels of protection design respectively, effectively preventing the power of lightning from damaging the cable, which is the equivalent to giving the entire network system a security fence. The test standard is much higher than the national CCC request. In thunderstorm weather, it can also provide monitoring network stability, reliable service and maintain the images transmission.

Additional Features:
6KV lightning protection
VLAN
IEEE 802.3af/at
250m transmission

Born for Small and Medium-sized HD IP Surveillance Projects



6kV lightning Protection

One-key VLAN

Inteligent 8-core power suppiy  

Smart Power Management



Large Buffer Design



102W Power Supply

  Excellent Lightning Protection

The switch supports 6 kV lightning protection for all port, protecting the switch from thunderstorms and making it more stable.

Enjoy Super HD Video Screen

2Mb built-in packet buffer outstand in comparison, ensuring smooth transmission of large files and HD videos even when HD IP cameras of 500W are working simultaneously.

Integrated with Smart Power Management Chip Makes the Switch Get Rid of Overload

It includes chips with smart power management function and integrated professional chip control algorithm,which can accurately calculate the output power. When the power of the receiving equipment exceeds the rated power (92W) of the PoE switch, the low priority port will automatically power off to avoid the over-run of the equipment and prolong the service life of the equipment.

Simple Port VLAN Setup

Ports 1-8 support IEEE 802.3at and IEEE 802.3af PoE standard. It provides 30W maximum PoE output a single port and 92W the whole device.

The Tenda TEG1009P-EI is 9-Port Gigabit Desktop Switch with 8-Port PoE, providing 9 GE Base-T Ethernet ports. 1-8 ports support IEEE802.3af PoE(15.4W) or 4 ports support 802.3at PoE(30W). Through conventional Cat 5 twisted pair, power can be transmitted along with data for AP, IP Camera and IP Phone. Plus, the device is compliant with 802.3az(EEE) standard, and is designed with superior performance such as lightning protection for 9th uplink port, PoE dynamic power, lower power consumption and fan-less. Thus, Wireless coverage, safety project, difficult power supply of end-device and maintenance hassle are effectively solved.

Key Features:
Compliant with IEEE802.3, IEEE802.3u, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at standards
1-8 ports support PoE?AF/AT?, wire-speed forwarding on each port
Backplane broadband up to 18Gbps, packet forwarding rate up to 13.4Mpps, and supports non-blocking wire-speed forwarding
Provides 9 10/100/1000Mbps auto-sensing RJ45 ports, support parallel-line and cross-line auto-detection (Auto MDI/MDIX)
Integrates with professional lightning-proof circuit, supports 2-level lightning -proof for uplink port
4K MAC address list with address auto-learning and aging
Complies with 802.az(EEE), applies energy-saving chipsets, environment-friendly, fan-less design for silent operation
Adopts Cat-5e ,extend the power and transmission distance up to 150 meters
Supports absorption installation and desktop installation, wall-mount
Superior PoE Performance

1-8 ports support IEEE 802.3af(15.4W) or 1-4 ports IEEE 802.3at (30W). Providing PoE dynamic power, the device can auto-detect power consumption of PD device and match proper output power

Pioneered 9 GE Ports in Domestic

Provides 9 GE Ethernet ports, supports layer 2 wire-speed forwarding on each port, and fully meets needs of Gigabit WLAN, HD data monitor
High Reliability
Integrated with a professional lightning protection circuit and 2-level lightning-proof for uplink port (4KV lightning proof for 9th port). Stronger Ethernet technology to improve your network performance.

Plug & Play

Plug and play, no configuration needed. Easy to maintain the device.

Easy to Install

The device is equipped with magnet and mounting hole, so it's easy to be installed on metal platform or on smooth wall.

Extend power supply distance

Adopts Cat-5e, extend the power and transmission distance up to 150 meters. The device is not only improving the quality of data delivery, but also expands coverage range of small network.

Dedicated for Surveillance & SMB Networking



6kV lightning Protection

GE&SFP uplink ports

Smart PoE Supply  

4 modes

150W Power Supply   GE & SFP uplink ports, Large Buffer of Nearly 3M

With one 10/100/1000 Mbps combo SFP slot, the switch can meet the current demand for uplink bandwidth of Gigabit WLAN and HD digital surveillance. Working with Tenda optical fibermodule TEG311SM, the switch supports a maximum transmission distance up to 20km.

6KV Excellent Lightning Protection

The switch offers various safety and protection types, including 6 kV lightning protection, PSE short-circuit protection, PoE overload protection, surge current protection etc, and these greatly protect the switch from being damaged by thunderstorm. Besides, it supports wide voltage input, AC?100-240V~50/60Hz.

Excellent lightning Protection

TEF1106P-4-63W supports professional lightning protection of 6KV for uplink ports & 4KV for power, which can protect the switch from the inductive lightning strike coming from the thunderstorm weather.

Cascading with 6 Devices, Can Support IP Surveillance Project of up to 96 Cameras

In the number of about 100 terminals accessed to the network, cascading 6 devices through the G1?G2/SFP2can achieve up to 96-channel monitoring, according to the project , it supports 300W/500W IP Caccessed and ensure stable video transmission without breaking up.If the both ends of devices are connected to the NVR, the video can be watched locally.

4 Modes for Different Networks

Standard mode, Port-based Priority mode, Port-based VLAN mode and Extend mode make TEF1118P-16-150W be able to deal with different networks?special for small & Medium-sized IP surveillance & WI-FI coverage project.

The Tenda TEF1210P switch supports 8 PoE ports, which can supply power to most powered devices through 8-core Ethernet cable and the total PoE power can be up to 123W while each PoE port can support the maximum of 40W.

Lead security transmission power supply to a new height
TEF1210P-8-150W 8FE+2GE+2SFP(Combo) Web Smart PoE Switch
6000V Port Lightning Protection
long distance transmission 
Maximum PoE Output Power 230W
PoE power up to 40W for each PoE port
6KV lighting protection PoE switch is the real monitoring private switch

For surveillance projects, cameras are often installed in an outdoor environment or a higher position, which also increases the camera and PoE switches probability of a lightning shock. This could result in the individual equipment getting damaged or lead to a whole local area network (LAN) paralysis.

The Tenda TEF12 series switches have a professional lightning protection design – up to 6kV surge protection, with two levels of protection design respectively, effectively preventing the power of lightning from damaging the cable, which is the equivalent to giving the entire network system a security fence. The test standard is much higher than the national CCC request. In thunderstorm weather, it can also provide monitoring network stability, reliable service and maintain the images transmission.

Up to 250 meters long distance transmission beyond hundred meters transfer limit

Due to the complex monitoring environment, when making cabling and networking, it’s very often to encounter the problem of inadequate network transmission distance.

The distance of each camera terminal to the monitoring centre is different, some only a few meters, some hundred metres, while others can be kilometres away. The Tenda TEF12 series PoE monitoring switches exclusive patent network extension technology, uses the common existing twisted pair, can support 250 metres data transmission, breaks the existing twisted pair hundred metres transmission limit; Provides a gigabit linked SFP port and can meet the demand of transmission up to 250 metres.

The total PoE power is 123W, 8 port full load power supply is enough

The unit’s total PoE power is 123W. It can provide 8 ports of full PoE power supply; One Port PoE supply is 40W, the unit’s PoE power can meet the full requirements of a network. With an eight core power supply design the network power consumption is reduced to half, highly reducing the power loss over the inferior cable, making sure the camera gets electricity and stability.

The Tenda TEF1218P switch supports 16 PoE ports, which can supply power to most powered devices through 8-core Ethernet cable and the total PoE power can be up to 230W while each PoE port can support the maximum PoE power of 40W.

Lead security transmission power supply to a new height
TEF1218P-16-250W 16FE+2GE+2SFP(Combo) Web Smart PoE Switch
6KV Port Lightning Protection
long Distance Transmission
Maximum PoE Output Power 230W
PoE Power Up to 40W for each PoE Port
6KV Lightning Protection PoE switch is the real monitoring private switch

For surveillance projects, cameras are often installed in an outdoor environment or a higher position, which also increases the camera and PoE switches probability of a lightning shock. This could result in the individual equipment getting damaged or lead to a whole local area network (LAN) paralysis. The Tenda TEF12 series switches have a professional lightning protection design – up to 6kV surge protection, with two levels of protection design respectively, effectively preventing the power of lightning from damaging the cable, which is the equivalent to giving the entire network system a security fence. The test standard is much higher than the national CCC request. In thunderstorm weather, it can also provide monitoring network stability, reliable service and maintain the images transmission.

Up to 250 meters long distance transmission beyond hundred meters transfer limit

Due to the complex monitoring environment, when making cabling and networking, it’s very often to encounter the problem of inadequate network transmission distance.

The distance of each camera terminal to the monitoring centre is different, some only a few meters, some hundred metres, while others can be kilometres away. The Tenda TEF12 series PoE monitoring switches exclusive patent network extension technology, uses the common existing twisted pair, can support 250 metres data transmission, breaks the existing twisted pair hundred metres transmission limit; Provides a gigabit linked SFP port and can meet the demand of transmission up to 250 metres.

The PoE total power is 230W, 16 port power supply full load is enough

The unit’s total PoE power is 230W. It can provide 16 ports of full PoE power supply; One Port PoE supply is 40W, the units PoE power can meet the full requirements of a network. With an eight core power supply design, the network power consumption is reduced to half, highly reducing the power loss over the inferior cable, making sure the camera gets electricity and stability.


The PoE total power is 230W, 16 port power supply full load is enough

The unit’s total PoE power is 230W. It can provide 16 ports of full PoE power supply; One Port PoE supply is 40W, the units PoE power can meet the full requirements of a network. With an eight core power supply design, the network power consumption is reduced to half, highly reducing the power loss over the inferior cable, making sure the camera gets electricity and stability.

The TEF1126P-24-250W not only offers 24 10/100 Mbps Base-TX RJ45 ports but also 1 10/100/1000 Mbps Base-T RJ45 ports and 1 1000 Mbps Base-X SFP port. Ports 1-24 comply with the IEEE 802.3af standard and 802.3at standard and each port can support a maximum PoE power output of 30W. The switch offers a maximum PoE power output of 135W and it can supply power when exchanging data with APs, IP cameras, and IP phones through CAT5 cables. It also provides simple management modes such as CCTV, VLAN and Extend to help reduce cabling costs of IP terminals.

Lead security transmission power supply to a higher level

24 10/100Mbps +1 GE/SFP Slots Switch With 24-Port PoE TEF1126P-24-250W

6KV lighting protection PoE switch is the real monitoring private switch

For surveillance projects, cameras are often installed in an outdoor environment or a higher position, which also increases the camera and PoE switches probability of a lightning shock. This could result in the individual equipment getting damaged or lead to a whole local area network (LAN) paralysis.

The Tenda TEF11 series switches have a professional lightning protection design – up to 6kV surge protection, with two levels of protection design respectively, effectively preventing the power of lightning from damaging the cable, which is the equivalent to giving the entire network system a security fence. The test standard is much higher than the national CCC request. In thunderstorm weather, it can also provide monitoring network stability, reliable service and maintain the images transmission.

CCTV, Standard, VLAN and Extend Operation Modes Offered

CCTV: 1-8 ports support QoS. If multiple IP cameras are connected to the switch, it is recommended to enable this mode and connect the G1 or SFP1 port of this switch to the upstream device like the monitoring computer - this ensures smoother monitoring video playback.

Standard: The switch’s functions are similar with a common unmanaged switch’s and all the ports of the switch can communicate with each other.

VLAN: In this mode, 1-24 ports of the switch cannot communicate with each other, but can communicate with the G1 and SFP1 ports. It can be used to isolate broadcast storms and DHCP broadcasts.

Extend: In this mode, the data rate of 1-8 port is limited to 10 Mbps, whereas the maximum transmission distance of the port is increased to 250 meters. All the ports of the switch can communicate with each other.

225W PoE power supply

Ports 1-24 comply with the IEEE802.3af and IEEE802.3at power supply standards. The entire switch offers a maximum PoE power output of 225W, whereas each port offers a maximum PoE power output of 30W. The ports can be used to supply power to APs and IP cameras while exchange data.

Additional Features:
PoE IEEE 802.3af/at
Port VLAN
Gigabit Uplink
6KV Lighting Protection

The Tenda TEF1226P switch supports 24 PoE ports, which can supply power to most powered devices through 8-core Ethernet cable and the total PoE power can be up to 370W while each PoE port can support the maximum of 40W.

Lead security transmission power supply to a new height
TEF1226P-24-440W 24FE+2GE+2SFP(Combo) Web Smart PoE Switch
6000V Port Lightning Protection
long distance transmission 
Maximum PoE Output Power 370W
PoE power up to 40W for each PoE port
6KV Lightning Protection PoE switch is the real monitoring private switch

For surveillance projects, cameras are often installed in an outdoor environment or a higher position, which also increases the camera and PoE switches probability of a lightning shock. This could result in the individual equipment getting damaged or lead to a whole local area network (LAN) paralysis. The Tenda TEF12 series switches have a professional lightning protection design – up to 6kV surge protection, with two levels of protection design respectively, effectively preventing the power of lightning from damaging the cable, which is the equivalent to giving the entire network system a security fence. The test standard is much higher than the national CCC request. In thunderstorm weather, it can also provide monitoring network stability, reliable service and maintain the images transmission.

Up to 250 metres long distance transmission beyond hundred meters transfer limit

Due to the complex monitoring environment, when making cabling and networking, it’s very often to encounter the problem of inadequate network transmission distance. The distance of each camera terminal to the monitoring centre is different, some only a few meters, some hundred metres, while others can be kilometres away. The Tenda TEF12 series PoE monitoring switches exclusive patent network extension technology, uses the common existing twisted pair, can support 250 metres data transmission, breaks the existing twisted pair hundred metres transmission limit; Provides a gigabit linked SFP port and can meet the demand of transmission up to 250 metres.


The total PoE power is 370W, 24 port full load power supply is enough

The unit’s total PoE power is 370W. It can provide 24 ports of full PoE power supply; One Port PoE supply is 40W, the units PoE power can meet the full requirements of a network. With an eight core power supply design, the network power consumption is reduced to half, highly reducing the power loss over the inferior cable, making sure the camera gets electricity and stability.