PoE Adapters & Extenders

The Fast Ethernet PoE+ Extender TL-POE10E extends a PoE/PoE+ network connection an additional 100m - 250m (10 Mbps Mode) from the PoE power source equipment. TL-POE10E expands network deployment with 802.3af/at PoE compliant devices, making it ideal for remote cabling requirements in surveillance scenarios. Distance will no longer be a barrier to network deployment.

Key Features of TP-Link POE10E Extends a PoE/PoE+ network connection an additional 100 m-250 m (10 Mbps mode) from the PoE power source equipment
Complies with IEEE 802.3af/at devices and supports up to 20 W maximum output power
2 × 10/100 Mbps ports for reliable data transmission
Plug-and-play design with no configuration required

The Ubiquiti U-PoE++ delivers up to 60W of Power over Ethernet, providing reliable energy to devices that need it most. Compatible with IEEE 802.3bt Type 3 standards, it supports high-performance access points, surveillance cameras, and other demanding network devices without requiring additional power sources.

Key Features of U-PoE++ Up to 60W power output (48V DC at 1.25A)
Single Gigabit LAN port
4-pair power delivery for maximum performance
Surge and clamping protection for both data and power lines
Compact dimensions: H 106 x W 63 x D 34 mm
Operating temperature: 0 to 40°C (32 to 104°F)
Compatible with high-power access points and surveillance cameras
Reliable Power Management Designed with surge protection and precise voltage clamping, the U-PoE++ maintains safe and consistent power delivery. It safeguards connected devices against voltage spikes while keeping data integrity intact, ensuring uninterrupted network performance.

Wide Compatibility The U-PoE++ is suitable for a variety of network devices adhering to the IEEE 802.3bt Type 3 PoE++ standard. Whether powering high-performance access points or PTZ cameras, this injector makes deployment simple and straightforward.

Compact and Easy to Deploy Its small footprint and simple connection design allow easy integration into any network setup. With a single Gigabit LAN port and standard AC input, it can be quickly installed without additional hardware.

The Ubiquiti POE-54V-80W delivers high-voltage Power-over-Ethernet for demanding network devices, providing reliable 54 V DC output with up to 80 W of power. Designed to work seamlessly with Ubiquiti EdgePoint products, this injector simplifies powering devices in locations where local AC power is not available, while maintaining safety through built-in surge and ESD protection.

Key Features of Ubiquiti POE-54V-80W High 54 V DC output delivering up to 80 W of power
Compatible with Ubiquiti EdgePoint devices like EP-R8 and EP-S16
Supports 4-pair powering over Ethernet cable
Built-in surge and ESD protection for safe operation
Global AC input range: 100-240 V
Compact dimensions: 123 x 65 x 34 mm
Device Protection PoE Adapters are highly reliable, and when used with Ubiquiti TOUGHCable™, they provide earth grounding and surge protection to help protect against electrostatic discharge (ESD) events.
Convenient Wall-Mounting The 24V, 0.5A models, POE-24-12W and POE-24-12W-G, are wall-mountable using the optional wall-mount brackets.

Seamless airGateway™ Compatibility The 15V, 0.8A and 24V, 0.5A models, POE-15-12W, POE-24-12W and POE-24-12W-G, work with the airGateway™ to bridge airMAX® connections to Wi-Fi at customer locations.

Power Delivery The injector supplies 54?V DC via RJ45, allowing devices to operate without a local DC source. It maintains stable voltage across varying loads and ensures consistent current delivery over longer cable runs.

Protection Features Surge, clamping, and ESD protections are integrated to safeguard both the injector and connected devices. Peak pulse and surge ratings are specified to prevent damage from unexpected power events.

Compatibility and Use Ideal for powering EdgePoint routers and switches where high power delivery is needed. Works with Cat5e or higher cabling and requires an upstream data source to provide network connectivity alongside power.

The Yealink YLPOE30 is a Power over Ethernet (PoE) adapter designed specifically for Yealink conference communication systems, including the CP960 phone.

It delivers both data and power over a single Ethernet cable, simplifying installation and reducing clutter.

Compatible with IEEE 802.3af and 802.3at standards, this adapter ensures reliable and effective conferencing by providing sufficient power without additional configuration.

The UACC-Adapter-PoE-USBC from Ubiquiti provides a reliable method to power USB-C devices through a single PoE connection. Designed for compactness and ease of use, it is ideal for connecting compatible cameras and other USB-C gadgets while maintaining a clean setup. With a sturdy construction and consistent performance, this adapter integrates smoothly into network environments that rely on PoE distribution.

Key Features of UACC-Adapter-PoE-USBC Delivers 5V DC at 2A via USB-C output through 48V DC PoE input
Compact design, measuring Ø30.4 x 95 mm and weighing 85 g
Durable polycarbonate enclosure for long-lasting performance
Compatible with devices like G4 Instant Camera and G4 DoorBell Pro
Simple Installation Setup is straightforward: connect the adapter to your PoE source and plug in your USB-C device. It requires minimal configuration, making it accessible for both home and office environments.

Reliable Performance The adapter consistently delivers power and network connectivity to connected devices, supporting daily operations without interruptions. Its compact form allows for discreet placement alongside devices, reducing cable clutter.

Wide Compatibility Works seamlessly with a variety of USB-C devices, particularly Ubiquiti cameras, providing both power and data connectivity over a single PoE line.

TRENDnet's Industrial Gigabit PoE+ Extender, model TI-E100, takes a single PoE+ connection and extends it an additional 100m (328 ft.) for remote PoE/PoE+ device installation. 

The industrial PoE+ extender auto-detects a PoE or PoE+ connection, and then extends it for a total distance of up to 200m (656 ft.) from the PoE+ power source equipment. The TI-E100 industrial PoE+ extender features a convenient wall mountable design for installation flexibility. 

Daisy-chain up to two industrial PoE+ extenders for a total PoE+ network extension of 300m (984 ft.).


Key Features:



Easy installation
Extends 100m for a total distance of up to 200m (656 ft.)
Daisy chain up to 2 units for a total PoE network extension of up to 300m (984 ft.)
Supports PoE (15.4W) and PoE+ (30W)
Wide operating temperature range of -40°C to 75°C
Durable IP30 rated metal housing
Convenient wall mountable design
No external power adapter required



Datasheets / User Manuals / Quick Start Guides can be downloaded from our Documentation tab (above)

Extend your network The DPE-302GE 2-Port Gigabit PoE Extender allows a Gigabit Power-over-Ethernet connection to be extended by up to 100 m per extender, to a massive maximum of 500 m in a daisy chain of extenders.1

Connect huge spaces Two ports in combination with more connected extenders enable you to bring power and data to security cameras, and monitoring and telecommunication systems, even across vast areas like university campus sites, large retail stores, libraries, airports and transportation tunnels.

Protected The extender has D-Link’s highest built-in 4kV surge protection, and is also capable of operating in temperatures of up to 60 °C (140 °F), allowing it to be deployed in harsher environments.


Ready to go Combined with three flexible methods of mounting: a powerful built-in magnet with anti-slip rubber feet, supplied screw anchors, and included velcro, the DPE-302GE is ready to use straight out of the box and can be deployed virtually anywhere.

 


With Networks in Mind   Designed to supply data, whether you need 10 to 1000 Mbps, and PoE power to devices such as IP surveillance cameras and wireless access points over extended distances.

  Power to Devices Because the DPE-302GE is powered by consuming a very small fraction of PoE power, you can extend the connection distance beyond 100 m as well as power devices without worrying about finding a nearby power outlet, giving you the freedom to design your network layout.

Robust design   A matte black discreet design with jet black rims, air vents to regulate airflow, and 3 digital blue LED lights to indicate the connected power supply and show you exactly which direction your power and data flows.

Note: Minimum Order Quantity for this product is: 5

Ethernet Extender for non-POE connections OUTREACH Lite provides a simple way to double the length of a 10/100 Ethernet connection. No configuration is required, it does not require a local power supply, and it does not restrict the throughput of the network link at all.

Compact and wall-mountable, OUTREACH Lite takes its power from the network cable using the universal 802.3af Power over Ethernet (POE) standard. Network connections can easily be upgraded to POE compatibility if it is not already available using a simple injector.

Note: OUTREACH Lite is powered by POE but does not forward it to other equipment. To extend network connections to devices that need POE or POE Plus, see Veracity's OUTREACH Max POE-forwarding Ethernet extender.

Rapid installation

Extending network cable runs from an existing POE switch port is as simple as connecting OUTREACH Lite in-line with the cable.  Cable runs of up to 200 metres (656 feet) in length are possible, by using a single OUTREACH Lite to connect two individual sections of up to 100 metres (328 feet) each.

Veracity's OUTREACH Lite Ethernet extender requires no external power supply.  It simply has two network ports which configure automatically on connection for network speed, duplex and crossover.

If no POE is available on the network, Veracity's OUTSOURCE injector can easily be added at either end of the connection.  No other equipment is required by end devices, as all Cat5/Cat6 links are regular Ethernet connections.

Full-bandwidth Ethernet extender

Because OUTREACH Lite repeats the Ethernet signal before it can degrade, the network can be extended without any restriction on its data capacity.  Thus the 200Mbit/s bandwidth of regular full-duplex 100BASE-T Ethernet is maintained, for maximum reliability and predictability of operation.

Go further

OUTREACH Lite can be used in combination with Veracity's OUTREACH Max POE-forwarding Ethernet extender, to create connections of 300 metres, 400 metres or even further.

For example, to extend a 100BASE-T connection to 400 metres (1312 feet) without any bandwidth restriction, two OUTREACH Max units would be located at 100 metre intervals, followed by an OUTREACH Lite. POE from the switch or injector would be forwarded by the OUTREACH Maxes as far as the OUTREACH Lite, so no power connections would be required along the connection.

This technique can be used to create unrestricted Cat5 network connections of greater than 2km (1.25 miles) in length if required.  See Veracity's "Long Range Ethernet Extension" application note for more information.



Key technical features:

Range:
At least 200m using a single OUTREACH Lite
Up to 2200m when used with combinations of OUTSOURCE and OUTREACH Max

Network:
10BASE-T / 100BASE-TX, full/half duplex (auto-negotiated)
Patch or crossover cables

POE in:
IEEE 802.3af Class 2 powered device
Device power 1.3 watts

POE out:
Not supported in OUTREACH Lite

Dimensions:
L 105mm x W 40mm x H 22mm

Applications:

IP Video

Use OUTREACH Lite to extend network connections to IP video cameras that are locally powered and only require an Ethernet connection without POE.

OUTREACH Lite and OUTREACH Max can also be used to upgrade legacy twisted-pair video installations to IP, where the Cat 5 infrastructure for a network is already in place, but run lengths exceed the 100 meter limit for Ethernet.

All cabled network installations

OUTREACH Lite can be buried, located in conduits and plenum spaces, or wall mounted wherever network cable needs to run.  Because OUTREACH Lite draws its own power from a POE source in the network closet, reliability and flexibility are maximised.

TRENDnet's 2-Port Industrial Outdoor Gigabit UPoE extender, model TI-EU120, takes a single UPoE connection and extends it an additional 100 meters (328 ft.) for up to two PoE+ devices. 

It auto-detects a PoE (15.4W), PoE+ (30W), or UPoE (60W) signal and extends it for a total distance of up to 200 meters (656 ft.) from the PoE source. Daisy chain up to 4 units for a total PoE network extension of up to 500 meters (1640 ft.). 

This outdoor UPoE extender features a single UPoE input port and two PoE+ output ports encased in an IP67 weather rated housing. Built-in voltage booster guarantees stable voltage output for your high powered PoE devices.


Key Features:



Easy installation
Extends 100m for a total distance of up to 200m (656 ft.)
Daisy chain up to 4 units for a total PoE network extension of up to 500m (1640 ft.) 
Use a single UPoE connection to extend PoE for up to two devices
Supports PoE (15.4W), PoE+ (30W), UPoE (60W) devices
Wide operating temperature range of -40°C to 75°C
IP67 outdoor weather rated housing
No external power adapter required
Built-in True Surge 6kV Protection



Datasheets / User Manuals / Quick Start Guides can be downloaded from our Documentation tab (above)

Note: Minimum Order Quantity for this product is: 2

Ethernet is the ubiquitous technology for Local Area Network (LAN) installation, and the majority of networks in place use the 100Base-TX network standards. (A Gigabit version of OUTREACH Lite XT is also available).

However, many security installations demand network connections that exceed the maximum 100 metres (328 feet) distance limit for wired Ethernet.

The Veracity VOR-ORL-XTOUTREACH Lite XT provides an instant solution to this restriction. Simply connect an OUTREACH Lite XT in line with the network cable - adding a Power over Ethernet (POE) injector if required - to double the available range to 200 metres (656ft).

Key Features of Veracity VOR-ORL-XT IP66/67 Nema 4X/6P tough enclosure for external installation
Instantly doubles cable range to 200 metres
Extend an additional 100 metres per unit with multiple units
Powered by POE (Power over Ethernet)
Easy to fit cable seals for cables with existing RJ45 plugs
Universal 10/100 compatibility (Gigabit available)
Secure wall mounting with detachable bracket
Simple installation OUTREACH Lite XT takes advantage of the universal 802.3af/at/bt POE standards, so it can draw its own power from the network connection. No local power is required, so OUTREACH Lite XT can be located exactly where needed. If your network switch has POE, simply connect OUTREACH Lite XT up to 100 metres from the switch, and it will deliver another 100 metres reach over regular Cat5e or similar cable (Diagram 1).

If POE is not available, the link can easily be upgraded using a low-cost POE injector such as Veracity's OUTSOURCE (Diagram 2). No set-up or network configuration is required, as OUTREACH Lite XT automatically sets up network speed, duplex and crossover on connection, and does not require an IP or MAC address.

Go further If a network extension beyond 200 metres (656ft) is required, Veracity's OUTREACH Max XT may be installed to extend Ethernet and POE to OUTREACH Lite XT. For example, a 300 metre (984ft) connection between a POE switch and another network device can be achieved by fitting an OUTREACH Max XT at 100 metres along the cable, followed by 100m then an OUTREACH Lite XT, and up to 100m to the non POE networked end-point device.

For longer Ethernet runs, Veracity recommends LONGSPAN long distance point-to-point devices, which can achieve 100Base-TX connections with POE at up to 820m (2,690ft).

No restrictions Because OUTREACH Max XT and OUTREACH Lite XT simply restore the network connection every 100 metres, the full (100Mbit/s) bandwidth of 100Base-TX Ethernet is maintained across the entire link. This maximises performance and transparency, with no risk of a reduced or unpredictable bandwidth, even at distances of several hundred metres or more.

Used as a pair, two Allied Telesis MMC6006 units provide up to 300Mpbs total bandwidth over coax cabling, at distances up to 3 km, to provide the ideal solution for data over coax.

Note: Minimum Order Quantity for this product is: 4

Outdoor Ethernet and POE Extender

OUTREACH G models as these support full gigabit data rates Simply connecting an OUTREACH Max XT in line with the network cable instantly doubles the Ethernet range from 100 to 200 metres,and forwards POE to the connected devices.

OUTREACH Max XT overcomes the distance limits of normal gigabit Ethernet.

OUTREACH Max XT outdoor-rated network extender for POE devices up to 60 watts, including IP67, Nema 4X/6P rated connector covers and 2/4 bolt wall-mounting bracket

OUTREACH Max XT lets you locate your external IP camera or wireless transmitter right where you want it, without being restricted by the 100metre (328 feet) limit for Ethernet cables.

Based on Veracity's established OUTREACH Max extender, compatibility with regular 802.3af POE, 802.3at POE plus and 802.3bt High power POE is assured, with no configuration or setup required.

Its rugged and streamlined enclosure features IP67, NEMA 4X/6P rated connector covers that assemble easily around conventionally terminated Cat 5e and Cat 6 cables.

Guaranteed operation over an extended temperature range and versatile mounting options mean OUTREACH Max XT is suited to a wide range of installation scenarios.

And inter-building network links or extension to non-POE equipment is also supported, with Veracity's OUTREACH Lite XT model.



Network, POE and Range:

See the OUTREACH Max page for OUTREACH Max XT specifications
See the OUTREACH Lite page for OUTREACH Lite XT specifications
Environmental:


Ambient temperature -40C to 70C / -40F to 158F
Relative humidity up to 85% non-condensing
Ingress protection to IP67, NEMA 4X/6P enclosure polycarbonate
Dimensions:

W 50mm x H 31mm x L 125mm (210mm with connectors fitted)
Mounting plate 74 x 64 x 2mm
 
Applications:

OUTREACH Max XT Ethernet extenders are ideal for IP video applications, as they eliminate the one disadvantage that network cameras have compared to older analogue cameras: the limited cable length. As POE is becoming universal in digital video installations, Cat 5 cable extension is as simple as connecting an OUTREACH Max XT wherever it is needed.

OUTREACH Max XT can also be used to upgrade legacy twisted-pair video installations to IP with POE, where the Cat 5 infrastructure for a network is already in place, but run lengths exceed the 100 meter limit for Ethernet.

PTZ cameras, heater/blower units and door interlocks are all examples of products that are adopting the extended-power POE Plus standard that OUTREACH Max XT also supports.

Wireless networking

Like IP cameras, wireless access points (WAPs) are ideally suited to POE as they must be positioned optimally in locations that are often inaccessible or remote. Using OUTREACH Max XT, a WAP - or Bluetooth access point or RFID reader - can be located just where it is needed for optimal coverage.

High-power radios and 802.11n APs can take advantage of the POE Plus power which OUTREACH Max XT supports.

Extending non-POE networks

OUTREACH Max XT can be used in combination with OUTREACH Lite XT to extend networks without POE from 300 meters to over 2 kilometers.

Note: Minimum Order Quantity for this product is: 4

The Veracity VOR-ORL-GXT OUTREACH Lite G XT is a compact inline Ethernet extender designed to carry Gigabit network traffic beyond standard cable limits using Power over Ethernet for its own operation. It is intended for installations where long cable runs are required and where local power at the extension point is not practical, supporting stable data transmission across extended distances in structured network deployments.

Key Features of Veracity VOR-ORL-GXT IP66/67 Nema 4X/6P tough enclosure for external installation
Instantly doubles gigabit cable range to 200 metres
Extend an additional 100 metres per unit with multiple units
Powered by POE (Power over Ethernet)
Easy to fit cable seals for cables with existing RJ45 plugs
Universal 10/100/1000 compatibility
Secure wall mounting with detachable bracket
Simple installation OUTREACH Lite GXT takes advantage of the universal 802.3af/at/bt POE standards, so it can draw its own power from the network connection. No local power is required, so OUTREACH Lite GXT can be located exactly where needed.

If your gigabit network switch has POE, simply connect OUTREACH Lite GXT up to 100 metres from the switch, and it will deliver another 100 metres’ reach over regular Cat5e or similar cable (Diagram 1). If POE is not available, the link can easily be upgraded using a low-cost POE injector such as Veracity's OUTSOURCE 30 (Diagram 2) which is gigabit compatible.

No set-up or network configuration is required, as OUTREACH Lite GXT automatically sets up network speed, duplex and crossover on connection, and does not require an IP or MAC address.

Go further If a network extension beyond 200 metres (656 feet) is required, Veracity's OUTREACH Max GXT may be installed to extend Ethernet and POE to OUTREACH Lite GXT. For example, a 300 metre (984 feet) connection between a gigabit POE switch and another network device can be achieved by fitting an OUTREACH Max GXT at 100 metres along the cable, followed by 100m then an OUTREACH Lite GXT, and up to 100m to the non POE networked end-point device (such as another switch or a Wireless Access Point).

For longer Ethernet runs, Veracity recommends LONGSPAN long distance point-to-point devices, which can achieve 100Base-TX connections with POE at up to 820m (2,690ft).

No restrictions Because OUTREACH Max GXT and OUTREACH Lite GXT simply restore the network connection every 100 metres, full gigabit bandwidth Ethernet is maintained across the entire link. This maximises performance and transparency, with no risk of a reduced or unpredictable bandwidth, even at distances of several hundred metres or more.

Note: Minimum Order Quantity for this product is: 2

The Veracity VLS-LSM-B LONGSPAN Max (Base) is designed to extend Ethernet and PoE far beyond standard network limits, making it well suited for demanding installations where distance and power delivery are critical. Acting as the base unit in a LONGSPAN Max link, it enables full-bandwidth data transmission alongside high-power PoE over a single cable. Its automatic configuration and consistent performance make it a practical choice for connecting remote IP devices such as cameras and access points across large sites.

Key Features of Veracity VLS-LSM-B LONGSPAN® enhanced with 90W POE capability (802.3bt)
Long range point-to-point Ethernet over Cat5e or Cat6 cable
Unrestricted 100Base-TX with POE at over 820 metres
Can deliver 60W at 250 metres, 40W at 390 metres
Ruggedised for high performance over a wide temperature range
Smart POE power and diagnostic display for reliable installation
Fully automatic, simple to install and maintenance-free
Veracity LONGSPAN Max Base

Veracity LONGSPAN Network Extender - Network (RJ-45) - 820 m Extended Range

Maximum POE power and bandwidth over extreme distances for IP cameras

LONGSPAN Max™ adds 90W POE power capability to the extremely successful LONGSPAN™ range of long-distance network extenders for Cat5e or Cat6 cable.

Maximum power, full-speed long-range Ethernet link with SAFEVIEW® diagnostics

LONGSPAN Max delivers unrestricted 100Base-TX with 802.3bt high power POE at distances far beyond the normal Ethernet limits for problem-free external PTZ IP camera installation



Features: • Connect a LONGSPAN Max Base to a LONGSPAN Max Camera and then to a POE camera, or other POE device

• CAT6 cable is recommended for increased POE delivery at distance.

• In this configuration, the LONGSPAN Max Base unit must be powered by a separate Veracity 54-57V DC power supply for maximum power.

• The LONGSPAN Max Base unit can output a maximum of 90W POE depending upon the optional PSU

• LONGSPAN Max Base can be used to power a LONGSPAN Max Camera or a LONGSPAN Max Quad at the device end






 



COMPATIBILITY LONGSPAN Max models are compatible with all of the standard LONGSPAN Base 8, LONGSPAN Base, Camera and Lite models.

For full details of distances, available POE and the recommended power supplies, please see the tables in the LONGSPAN Max Application Notes and Veracity Datasheets



POE POWER BUDGET The Veracity 54-57V DC power supplies provide maximum range and Hi-POE power budget at the camera end.

For maximum POE delivery, especially when using with a LONGSPAN Max Quad, the LONGSPAN Max Camera end device can be powered locally with a Veracity 54-57V PSU of up to 240W.



LONG RANGE ETHERNET & Hi-POE


Connect a LONGSPAN Max Base to a LONGSPAN Max Camera and then to a POE camera, or other POE device.

CAT6 cable is recommended for increased POE delivery at distance.

In this configuration, the LONGSPAN Max Base unit must be powered by a separate Veracity 54-57V DC power supply for maximum power.

The LONGSPAN Max Base unit can output a maximum of 90W POE depending upon the optional PSU.

LONGSPAN Max Base can be used to power a LONGSPAN Max Camera or a LONGSPAN Max Quad at the device end.

Note: Minimum Order Quantity for this product is: 5

The Veracity VLS-LSM-C is a camera-side unit within the LONGSPAN MAX range, designed to carry Ethernet data and PoE power over extended distances using standard Cat5e or Cat6 cabling. It is commonly used in IP surveillance setups where long cable runs are required between the network switch and the camera location, allowing both connectivity and power to be delivered through a single link.

Key Features of Veracity VLS-LSM-C LONGSPAN™ enhanced with 90W POE capability (802.3bt).
Long range point-to-point Ethernet over Cat5e or Cat6 cable
Unrestricted 100Base-TX with POE at over 820 metres
Can deliver 60W at 200 metres, 40W at 350 metres
Ruggedised for high performance over a wide temperature range
Smart POE power and diagnostic display for reliable installation
Fully automatic, simple to install and maintenance-free
Veracity LONGSPAN Max Camera

Veracity LONGSPAN Network Extender - Network (RJ-45) - 820 m Extended Range

Maximum POE power and bandwidth over extreme distances for IP cameras

LONGSPAN Max™ adds 90W POE power capability to the extremely successful LONGSPAN™ range of long-distance network extenders for Cat5e or Cat6 cable.

Maximum power, full-speed long-range Ethernet link with SAFEVIEW® diagnostics

LONGSPAN Max delivers unrestricted 100Base-TX with 802.3bt high power POE at distances far beyond the normal Ethernet limits for problem-free external PTZ IP camera installation





 

The Power and Bandwidth your IP Camera Needs, at Exceptional Distances LONGSPAN delivers unprecedented power and bandwidth over extreme lengths of regular Cat 5e or Cat 6 network cable, enabling a dependable connection to IP cameras and other remote network devices.

LONGSPAN is a point-to-point solution. It self-configures for the best performance. No set up or configuration is required. LONGSPAN even supports single-pair UTP cables, providing a fast upgrade solution for legacy analogue systems.

LONGSPAN offers unrestricted 100Base-TX at a phenomenal 820 metres range, with POE-equipped models delivering full-power 802.3at POE Plus at 600 metres, LONGSPAN assures reliability in the most challenging scenarios.

LONGSPAN is available in POE and data-only models. It is also available in high power Max single and Quad versions for the base and camera ends. See Documentation Tab for all datasheets including LONGSPAN Base 8, LONGSPAN Max and LONGSPAN Max Quad datasheets.



Unrivalled range, uncompromised bandwidth IP cameras can demand peak network bandwidth of several times their average data rate while transmitting critical high-activity or low-light scenes. That's why LONGSPAN has been designed to support the full 200Mbps bandwidth required for reliable 100Base-TX Ethernet at up to 820 metres Cat 6 (or 690 metres Cat 5e).

For even more extreme distances, LONGSPAN can automatically negotiate a 10Base-T connection, supporting a range in excess of 1000 metres, over ten times the conventional limit for cabled Ethernet.



More power, much further LONGSPAN models with POE can be powered from conventional IEEE 802.3af POE or 802.3at POE Plus and 802.3bt High Power POE switches and injectors, or Veracity's versatile power supply options can be specified for maximum range and power.

The full 25 watts required for POE Plus devices is available at up to 600 metres Cat 6 when a Veracity power supply is used, or 5 to 20 watts can be delivered from other POE sources depending on range and cable type. LONGSPAN Max High Power devices are also now available up to 90W.



Upgrade to IP, keep the UTP Sites with legacy analogue cameras often use UTP baluns to send video over several hundred metres of twisted pair cable. LONGSPAN facilitates a simple upgrade path to IP for these installations.

LONGSPAN can automatically detect and adapt to single-pair cables, and deliver the same uncompromised 10 or 100Base-TX connection up to 820 metres, assuring predictable IP video quality each and every time.



High density, high reliability LONGSPAN's unique, expandable mounting system permits up to 24 channels to be mounted in just 1U of rack space, with configurable rear-mount power supplies available if desired.

Smart diagnostic LEDs, including a SAFEVIEW® display on POE models, provide instant confirmation of cable-dependent power availability, and feedback of remote link status and other diagnostic information, for fast, confident installation.



High Power POE Over Cat5e or Cat6 Application Diagram:

 





Local Power at the Camera End Application Diagram:

 





Local power option As shown in the diagram above, LONGSPAN Max Camera devices can be locally-powered to deliver the maximum POE (71W) to the IP camera or other POE-powered device, irrespective of LONGSPAN link distance.

In this configuration, the LONGSPAN link could be 820m and LONGSPAN Max Base would be replaced with LONGSPAN Lite as POE transmission over the link is not required. A Quad version of LONGSPAN Max is also available for the camera end with four 802.3bt compatible POE ports, allowing the connection of up to four IP devices over one LONGSPAN link.



Designed for installers LONGSPAN devices self-configure for the best performance every time they are connected. No user setup, no DIP switch settings, and no system pairings are required.

Veracity’s SAFEVIEW® smart LED display provides instant, visible confirmation of link status, power availability, and useful diagnostic information, from each device at either end of the cable.

High-density device unit installations are supported, with up to 24 single Base devices or four LONGSPAN Base 8 devices mounted in a 1U rack space including options for rear-mounted Veracity POE power supplies.



Surge protection LONGSPAN devices have built-in surge potection, but for long external runs additional surge protection is strongly recommended.

AXIS T8129-E Outdoor PoE Extender offers a smart and easy-to-install solution for extending the range of your network – with no additional power supply. Without being restricted by the 100m (328ft.) limit for Ethernet cables, Axis network video products can be installed at greater distances. Simply connect AXIS T8129-E in-line with the CAT5e or CAT6 cable and power is forwarded to your Axis network video product.




Robust, outdoor-ready solution for covering distances



• Extends Ethernet and PoE connections beyond the 100m (328 ft.) limit

• No additional power supply is required

• IEEE 802.3af, IEEE 802.3at and High PoE 60 W compatible

• Rugged, IP66/IP67-rated enclosure

• Full-rate network throughout the whole extended distance






Wide compatibility A perfect match with all Axis network video products, AXIS T8129-E Outdoor PoE Extender supports PoE, and it is both IEEE 802.3af, IEEE 802.3at and High PoE 60 W compatible. With its rugged, IP66/IP67-rated enclosure, AXIS T8129-E withstands harsh environmental conditions and challenging temperatures.




Covering the distances Range depends on the power required so depending on midspan and camera type the connection can in total be between 200-400 meters (656-1312 ft.). For instance, a 25 watt PTZ dome camera may be located 200 m (656 ft.) away using a single AXIS T8129-E. Or, the cable length to a regular 5 watt network camera may extend up to 400 m (1312 ft.), by fitting three AXIS T8129-E at 100 m (328 ft.) intervals.




Typical setup:







 

AXIS T8640 PoE+ over Coax Adapter Kit

Cost-efficient migration to network video for smaller installations



• Reuse Coax cables and benefit from Power over Ethernet (PoE)

• Suitable for long-range coax installations

• Low upfront investment


If you want to move to IP and it is time to replace your analog video cameras, AXIS T8640 PoE+ over Coax Adapter Kit is an efficient way to make the switch – and keep your Coax cabling. AXIS T8640 PoE+ over Coax Adapter Kit includes two adapters, one for connecting a network camera to a Coax cable and one for connecting it to the network (see Typical set-up).




Let your Coax cables do double-duty AXIS T8640 PoE+ over Coax Adapter Kit lets you reuse hard-to-replace or long-range Coax cabling when you replace your analog cameras with Axis network cameras. And you can integrate Power over Ethernet over Coax for efficient power management. Range distances depend on the power required and the type of cable quality. With AXIS T8640 you can add local power to the device unit enabling higher power cameras to be used.




Typical set-up:













 






The right choice for smaller installations With AXIS T8640 PoE+ over Coax Adapter Kit, you can replace your analog cameras with network video cameras at your own pace – one camera or several at a time. Because it is a single-channel solution, there is no need to invest in chassis or to replace more than one camera at a time. Simply add adapter kits as you need them.

Adaptor set provides link speed validation up to 10GigE, PoE load testing and CAT3 - CAT6A channel testing.

Key features

Validate link speed with Signal to Noise Ratio (SNR) based testing while under both traffic and PoE load for 2.5, 5, 10GigE
See PoE configuration and load in current/wattage/voltage with support for 802.3 af/at/bt, UPoE
Standards based channel testing from CAT3 - CAT6A with Autotest and Pass/Fail indication
Standards based cable certificaton test results available on screen only
Savings of test results requires OP-CAT6A License

Note: Minimum Order Quantity for this product is: 2

Veracity OUTSOURCE 90 W 54 V

90W POE injector for the highest power applications

OUTSOURCE 90 delivers the highest power allowed by the POE standard (802.3bt), used for external PTZ IP cameras and other very high-power applications

OUTSOURCE is a compact Power over Ethernet (POE) injector. It injects industry-standard IEEE 802.3af POE onto Cat 5 or similar network cabling to deliver reliable remote power to IP cameras, wireless access points (APs) and other devices.




Features: • Delivers maximum remote power to IP cameras & POE devices

• 802.3bt compliant and GigE compatible

• 90W Power output

• Safety assured as POE is only enabled to compliant devices

• Integrated overload protection

• Compact, wall-mountable unit

• Sealed, fanless design for reliability






 





Upgrade to POE easily Simply route a single network connection through OUTSOURCE 30, and it will automatically inject electrical power onto the cable whenever it detects a compatible device.

Designed for straightforward installation, OUTSOURCE 30 is a compact, wall-mountable unit with a sealed, fanless design for reliability. Safety is assured, as PoE will only be enabled to compliant equipment, and overload protection is incorporated.




Extended compatibility OUTSOURCE 30 supports Gigabit Ethernet as well as 100BASE-T and 10BASE-T. In addition to IEEE 802.3af and IEEE 802.3at POE, it can also deliver power to Cisco Aironet wireless access points.




Enhanced power for OUTREACH OUTSOURCE 30 can deliver enhanced POE power to Veracity's OUTREACH Max network extender, enabling extension of POE Ethernet connections to higher-power devices over longer distances.


Full specification and details can be found in the Product Datasheet PDF file

Power over Ethernet extender repeates the data signal and forward the PoE to the camera, PoE+ compliant it is compatible with all Axis cameras. No additional power supply is required. The maximum total distance between switch and camera depends on the power input and the power required by the camera, but all cameras can be at least extended to 200 meter connection.

Compatibility

AXIS T8129 PoE Extender is compatible with all Axis network video products with PoE, and supports both IEEE 802.3af and IEEE 802.3at. Check in the Typical set-up section for connection examples with Axis network video products.

Range

Range depends on the power required, so a 25 watt PTZ dome camera may be located 200 m (656 ft.) away using a single AXIS T8129. Or, the cable length to a regular 5 watt network camera may extend up to 400 m (1312 ft.), by fitting three AXIS T8129 at 100 m (328 ft.) intervals. Check in the Range tab for information about Maximum distances.

No additional power supply

AXIS T8129 does not require any additional power supply and the connected network camera is fed by a single PoE switch or midspan. It offers two female Ethernet ports, which are both configured automatically for link speed, duplex and crossover and the full-rate network throughput is maintained.

Replacement Microscanner PoE Wiremap Adapter.

Replacement wiremap adapter for MicroScanner™ PoE Cable Verifier

Remote adapter tests copper cabling

With F-Connector and 8-Pin Modular Jack

Doubles as a protective cap for the cable verifier

AXIS T8641 PoE+ over Coax Base

Single-channel base unit with DC input



• Reuse Coax cables and benefit from PoE

• Perfect for smaller installations

• Low upfront investment


AXIS PoE+ Over Coax lets you reuse hard-to-replace or long-range Coax cabling when you replace your analog cameras with Axis network cameras. And you can integrate Power over Ethernet over Coax for efficient power management. Range distances depend on the power required and the type of cable quality.


With AXIS PoE+ Over Coax, you can replace your analog cameras with network video cameras at your own pace – one camera or several at a time. Because it’s a single-channel solution, there’s no need to invest in chassis or to replace more than one camera at a time.


The base unit is part of AXIS T8640 PoE+ over Coax Adapter Kit and AXIS T8645 PoE+ over Coax Compact Kit. For more information and set-up illustrations, see the product pages for the kits.

AXIS T8642 PoE+ over Coax Device

Single-channel device unit with DC input



• Reuse Coax cables and benefit from PoE

• Suitable for long-range Coax installations

• Low upfront investment


AXIS PoE+ Over Coax lets you reuse hard-to-replace or long-range Coax cabling when you replace your analog cameras with Axis network cameras. And you can integrate Power over Ethernet over Coax for efficient power management. Range distances depend on the power required and the type of cable quality. With AXIS T8642 you can add local power to the device unit enabling higher power cameras to be used.


The device unit is part of AXIS T8640 PoE+ over Coax Adapter Kit and AXIS T8646 PoE+ Over Coax Blade Kit. For more information and set-up illustrations, see the product pages for the kits.

Note: Minimum Order Quantity for this product is: 2

Veracity OUTSOURCE 30 W 55 V

Compact POE injector that delivers reliable POE for IP cameras and devices

Delivers enhanced 30W POE to all 802.8af and 802.3at standard devices. OUTSOURCE 30 is GigE compatible and automatically detects compatible devices.

OUTSOURCE is a compact Power over Ethernet (POE) injector. It injects industry-standard IEEE 802.3af POE onto Cat 5 or similar network cabling to deliver reliable remote power to IP cameras, wireless access points (APs) and other devices.




Features: • Delivers reliable remote power to IP cameras and POE devices

• Compatible with gigabit Ethernet

• Safety assured as POE is only enabled to compliant devices

• 30W Power output

• Compact, wall-mountable unit

• Integrated overload protection

• Sealed, fanless design for reliability






 





Upgrade to POE easily Simply route a single network connection through OUTSOURCE 30, and it will automatically inject electrical power onto the cable whenever it detects a compatible device.

Designed for straightforward installation, OUTSOURCE 30 is a compact, wall-mountable unit with a sealed, fanless design for reliability. Safety is assured, as PoE will only be enabled to compliant equipment, and overload protection is incorporated.




Extended compatibility OUTSOURCE 30 supports Gigabit Ethernet as well as 100BASE-T and 10BASE-T. In addition to IEEE 802.3af and IEEE 802.3at POE, it can also deliver power to Cisco Aironet wireless access points.




Enhanced power for OUTREACH OUTSOURCE 30 can deliver enhanced POE power to Veracity's OUTREACH Max network extender, enabling extension of POE Ethernet connections to higher-power devices over longer distances.


Full specification and details can be found in the Product Datasheet PDF file

You can connect the NPOE-EXT-1G30 between two sections of Ethernet cable, and you can push your PoE devices up to 328 feet farther. And by daisy-chaining up to 4 extenders, you can expand your reach all the way to 1,640 feet - perfect for covering large commercial spaces, industrial facilities, or outdoor areas.

Gigabit Ethernet Extender Extends Your PoE/PoE+ Up to 1640 ft. Designed for 10/100/1000 Mbps networks, the NPOE-EXT-1G30 extends the connection between a powered source device and a PoE/PoE+ device, like a security camera, VoIP telephone, credit card scanner or digital sign, an extra 328 ft. By cascading up to four units, you can take that distance even farther—up to 1640 ft. (500 m) in all. It fits right into your existing installation and takes almost no time to install.

Typical Applications - Install a security camera in a distant location

- Connect unified communications equipment to a source located in a different room

- Connect retail equipment, such as a credit card scanner or digital sign, to a source in a back office

Saves You Time and Money on Unnecessary Equipment Updates

The compact PoE/PoE+ extender delivers 10/100/1000 Mbps of data and up to 30 watts of power using existing Cat5e/6/6a cables, eliminating the need to install new AC power lines and electrical outlets. This cost-effective extender sends DC power and Ethernet data through your Ethernet cable, cutting down on cable clutter, equipment costs and installation time and labor. It also automatically detects PoE/PoE+ equipment and protects it from being damaged by incorrect installation.

Supports Power over Ethernet to Save You Money and Give You More Installation Choices

Because this extender supports PoE, it can supply the power to operate compatible IEEE 802.3at/af PoE devices, such as security cameras, VoIP telephones, point-of-sale kiosks and access control devices. This saves you the expense and effort of purchasing, connecting and installing individual power supplies for each device. It also helps you install PoE devices in areas far away from AC outlets, such as poles or ceilings. It supports half/full-duplex 1 Gbps communication for sending and receiving data simultaneously, and protects your PoE device against short circuits and overloads.

Simple Plug-and-Play Installation Has Your Device Connected in Minutes

No configuration or software is required to add the NPOE-EXT-1G30 to your LAN. Just connect your switch or network jack and your PoE/PoE+ device to the shielded RJ45 Power + Data ports using existing Cat5e/6/6a cable. LEDs indicate the unit is receiving power and is ready to transmit data.

Designed for Installation Almost Anywhere

Mounting holes are featured for installing the extender on a shelf, desktop, wall or any other smooth surface with user-supplied hardware. The black plastic housing fits in the palm of your hand, so it is small enough to hide away without interfering with your workflow or décor. The fanless design is ideal for silent operation.

Note: Minimum Order Quantity for this product is: 10

Ethernet Extender for POE and POE Plus equipment OUTREACH Max enables network installers to overcome the distance limitations of Ethernet and Power over Ethernet (POE) easily, meaning that IP cameras, wireless access points, and other POE-powered network devices can be located right where they are needed.

Simply connect OUTREACH Max in-line with the Cat5 or Cat6 network cable for every extra 100 metres (328 feet) of length required. No configuration or electrical supply is needed, and full-rate network throughput is maintained.

Note: OUTREACH Max extends network connections to POE-enabled devices only.

Extend Ethernet and POE

Ethernet and POE both restrict cable distances to 100 metres (328 feet) between network ports.  However, POE-powered devices such as IP cameras and wireless access points frequently must be located at far greater distances from the nearest network switch or power outlet.

OUTREACH Max provides an instant solution to this problem.  By connecting an OUTREACH Max for every extra 100 metres of cable, both Ethernet and POE can be extended to 200, 300, or even 800 metres (2625 feet).

Max power extension

OUTREACH Max is compatible with all regular (IEEE 802.3af) POE devices.  In addition, it can be used with IEEE 802.3at POE Plus equipment, and even non-standard or "4-pair" POE to over 60 watts.

For maximum power and range, Veracity's OUTSOURCE enhanced POE injector may be used.  The OUTSOURCE Plus enhanced POE Plus injector is recommended for all POE Plus applications.

Max cable range

OUTREACH Max's efficient design maximises the distance POE can be extended to, and multiple units can be connected in series for distances beyond 200 metres.

Range depends on the power required, so a 25 watt PTZ camera may be located 200 metres away using a single OUTREACH Max. Or, the cable length to a regular 5 watt IP camera may extend up to 800 metres (2625 feet), by fitting seven OUTREACH Maxes at 100 metre intervals.  See Veracity's forthcoming "Long Range Ethernet Extension" application note for more information.

Max reliability

Because OUTREACH Max draws its own power from the POE on the cable, all electrical power for the connected devices comes from a single POE switch or injector, which simplifies installation and allows back-up and control of all network power.

OUTREACH Max's only connections are its two Ethernet ports, and both configure automatically for link speed, duplex and crossover, to eliminate the risk of misconfiguration. Power is forwarded automatically, and issues with POE power classes are avoided.

As OUTREACH Max repeats the network connection every 100 metres, quality does not degrade.  This means that the full bandwidth of 100BASE-T Ethernet (200Mbit/sec) is maintained, even over 800 metre runs. This is essential for assured transparency and predictability.

Key technical features:

Range:

100m (328') per cable segment between OUTREACH Max units:

Camera power 6W 12W 18W 25W Range with POE switch 400m 200m n/a n/a Range with OUTSOURCE 700m 300m n/a n/a Range with OUTSOURCE Plus 700m 450m 350m 200m
(Range depends only on peak device power and not "POE power class") Network:

10BASE-T / 100BASE-TX, full/half duplex (auto-negotiated)


POE standards supported:
IEEE 802.3af POE
EEE 802.3at (2-event) POE Plus
"Always-on" / "dumb" 48V POE
"Four-pair" POE
Dimensions:
L 105mm x W 40mm x H 22mm
Applications:

IP Video and Security

OUTREACH Max Ethernet extenders are ideal for IP video applications, as they eliminate the one disadvantage that network cameras have compared to older analogue cameras: the limited cable length.  As POE is becoming universal in digital video installations, Cat 5 cable extension is as simple as connecting an OUTREACH Max wherever it is needed.

OUTREACH Max can also be used to upgrade legacy twisted-pair video installations to IP with POE, where the Cat 5 infrastructure for a network is already in place, but run lengths exceed the 100 meter limit for Ethernet.

PTZ cameras, heater/blower units and door interlocks are all examples of products that are adopting the extended-power POE Plus  standard that OUTREACH Max also supports.

Wireless networking

Like IP cameras, wireless access points (WAPs) are ideally suited to POE as they must be positioned optimally in locations that are often inaccessible or remote.  Using OUTREACH Max, a WAP - or Bluetooth access point or RFID reader - can be located just where it is needed for optimal coverage. 

High-power radios and 802.11n APs can take advantage of the POE Plus power which OUTREACH Max supports.

Extending non-POE networks

OUTREACH Max can be used in combination with OUTREACH Lite to extend networks without POE from 300 meters to over 2 kilometers.

The NPOE-EXT-1G30WP solves that problem. This powerful extender lets you push your PoE connection an extra 100 meters, and you can even chain multiple units together for a total reach of 500 meters. Just connect the extender between two sections of Cat5e/6/6a cable up to 328.08-ft. (100 m) each. That means you can place your devices exactly where you need them, without worrying about running out of cable.

Saves You Time and Money on Unnecessary Equipment Updates

The compact PoE/PoE+ extender delivers 10/100/1000 Mbps of data and up to 30 watts of power using existing Cat5e/6/6a cables, eliminating the need to install new AC power lines and electrical outlets. This cost-effective extender sends DC power and Ethernet data through your Ethernet cable, cutting down on cable clutter, equipment costs and installation time and labor. It also automatically detects PoE/PoE+ equipment and protects it from being damaged by incorrect installation.

Gigabit Ethernet Extender Extends Your PoE/PoE+ Up to 1640 ft. Designed for 10/100/1000 Mbps networks, the NPOE-EXT-1G30 extends the connection between a powered source device and a PoE/PoE+ device, like a security camera, VoIP telephone, credit card scanner or digital sign, an extra 328 ft. By cascading up to four units, you can take that distance even farther—up to 1640 ft. (500 m) in all. It fits right into your existing installation and takes almost no time to install.

Typical Applications - Install a security camera in a distant location

- Connect unified communications equipment to a source located in a different room

- Connect retail equipment, such as a credit card scanner or digital sign, to a source in a back office

Easy RJ45 Cable Installation Guide This comprehensive installation guide demonstrates the step-by-step process for properly connecting Cat5e/6/6a cables to the NPOE-EXT-1G30WP. The detailed instructions ensure optimal performance and weather-resistant connections through the included water-resistant covers. Each step is clearly illustrated to help technicians achieve reliable installations in any environment.

Typical Applications - Compatible with Cat5e/6/6a cables

- Water-resistant cable connection system

- Tool-less installation design

Applications - New PoE device deployments

- Network infrastructure upgrades

- Outdoor network expansions

Supports Power over Ethernet to Save You Money and Give You More Installation Choices

Because this extender supports PoE, it can supply the power to operate compatible IEEE 802.3at/af PoE devices, such as security cameras, VoIP telephones, point-of-sale kiosks and access control devices. This saves you the expense and effort of purchasing, connecting and installing individual power supplies for each device. It also helps you install PoE devices in areas far away from AC outlets, such as poles or ceilings. It supports half/full-duplex 1 Gbps communication for sending and receiving data simultaneously, and protects your PoE device against short circuits and overloads.

IP65 Rating Denotes Resistance to Dust and Water

The IP65 rating means the aluminum housing is not only 100% protected against dust, but also able to endure water spray, such as from a nozzle, from all directions. This makes the NPOE-EXT-1G30WP ideally suited to outdoor use.

Simple Plug-and-Play Installation Has Your Device Connected in Minutes

No configuration or software is required to add the NPOE-EXT-1G30WP to your LAN. Just connect your switch or network jack and your PoE/PoE+ device to the shielded RJ45 Power + Data ports using existing Cat5e/6/6a cable. LEDs indicate the unit is receiving power and is ready to transmit data.

Designed for Installation Almost Anywhere

Mounting holes are featured for installing the extender on a shelf, desktop, wall or any other smooth surface with user-supplied hardware. The silver aluminum housing fits in the palm of your hand, so it is small enough to hide away without interfering with your workflow or décor. The fanless design is ideal for silent operation.