Fluke Networks OptiFiber Pro

OptiFiber Pro Add on Kit - includes OptiFiber Pro Quad OTDR Module, (2) SC/LC Multimode Launch Cables—50 µm, (2) SC/LC Singlemode Launch Cable—9 µm, (2) OTDR source port interchangeable LC adapters, SC/SC Simplex Adaptor, LC/LC Simplex Adaptor, TPAK Fiber Hanging Kit, Carry Case, Statement of Calibration and Getting Started Guide.

OptiFiber® Pro OTDR

Built for the Enterprise

OptiFiber Pro is the first OTDR built from the ground up for enterprise fiber optic cabling testing. OptiFiber Pro is focused on reducing costs while enhancing productivity and improving network reliability.
First OTDR with a smartphone user-interface
Industry's shortest event and attenuation dead zones
Accelerate fiber certification with the fastest set-up and trace times
SmartLoop OTDR introduces the testing of two fibers in a single test eliminating the need to travel to the far end of the connection to perform tests.
Improve resource utilization with custom configurations for projects and users
Simplify use with "DataCenter OTDR™" mode and EventMap™ view
Custom project folders
Compatible with Linkware™ Live. Linkware Live enables to easily track job progress, get real-time access to test results to quickly fix problems in the field, and easily transfer and consolidate test results from the tester to LinkWare™ PC Cable Test Management Software.
OptiFiber® Pro is the industry’s first OTDR built from the ground up to meet the challenges of enterprise fiber optic infrastructures. This troubleshooting and certification tool combines uncomplicated power, unparalleled efficiency and the exact functions needed for troubleshooting campus, data center and storage fiber networks.

The OptiFiber® Pro OTDR elevates fiber optic testing with the industry’s only smartphone interface that turns a technician into a fiber expert. The DataCenter OTDR configuration eliminates uncertainty and errors that occur when testing data center fiber. Its ultra-short dead zones enable testing of fiber patchcords in virtualized data centers. These capabilities, plus the fastest-in-the-industry trace times, make the OptiFiber Pro OTDR a must-have tool.

SmartLoop OTDR enables automated testing and analysis of two fibers in a single test. This patent pending process automatically separates the two fibers for individual pass/fail analysis, display, and reporting. Not only does this cut the testing time by at least half, it also enables bi-directional testing without moving the OTDR to the far end.

Smartphone User Interface

Most OTDRs are designed for a myriad of applications, causing the user interface to be dif?cult to navigate and interpret. OptiFiber Pro combines the latest “gesture-based” interface technology with a capacitive touchscreen to deliver the most innovative and user-friendly OTDR.

Advantages:

Single-touch tap and swipe control for selecting and scrolling menu items
Multi-touch pinch to zoom for easy magni?cation control on a graphical fiber trace
Task-focused design to reduce back and forth navigation through screens
Capacitive touchscreen eliminates the need to recalibrate unlike legacy touchscreens
Context sensitive on-screen help that gives users additional details or problem resolution suggestions



Optimized for the Datacenter

Driven by server virtualization and multi-gigabit links between servers, networks and storage, the datacenter architecture employs more patch cords and dense topology connectors, rendering carrier-class OTDRs with long dead zones ineffective. OptiFiber Pro not only makes fiber deployment in datacenters possible, but provides the highest level of accuracy for quick problem resolution.

With a simple one-touch selection, users enter DataCenter OTDR mode - without setup time for fine-tuning as needed in legacy OTDRs. DataCenter OTDR mode automatically detects OTDR parameters - end-detection algorithms, pulse widths, etc - without getting confused by the short links or number of connectors.

Advantages:
Ultra-short event and attenuation dead-zones precisely locates events and faults on fiber links
DataCenter OTDR™ mode automatically sets the con?guration to quickly test datacenter fiber
The EventMap feature depicts fiber events in a way that requires no trace analysis expertise



SmartLoop OTDR

SmartLoop OTDR enables automated testing and analysis of two fibers in a single test. This patent pending process automatically separates the two fibers for individual pass/fail analysis, display, and reporting. Not only does this cut the testing time by at least half, it also enables bi-directional testing without moving the OTDR to the far end. In addition to getting the job done quicker, SmartLoop OTDR further enhances the ease and speed of testing in environments where the far end is difficult of even dangerous to reach because the OTDR never has to be moved to the far end.




Unique Certi?cation with Flexibility and Ef?ciency
An important aspect in maximizing an OTDR’s value is to properly plan its day-to-day usage. With built-in project management, OptiFiber Pro allows a project manager to de?ne each user’s role, settings and the associated tasks to be performed – transforming the OTDR into an all-in-one fiber testing tool complete with planning, inspection, certi?cation and reporting.

OptiFiber Pro enhances job efficiency by allowing the workflow planner to create and manage operator and job profiles per project - defined jobs or sets of cable IDs can be assigned to specific operators. The progress and status of each project can also be easily monitored.

Advantages:

Full OTDR capability that certi?es fiber performance based on job assignment for each operator
Powerful project management facilitates OTDR sharing with clear job assignment for each operator
Easy monitoring of job progress with pass/fail results
On-screen report generation and upload to LinkWare™ application


FiberInspector™ Pro

OptiFiber Pro incorporates the FiberInspector Pro video inspection system which enables you to quickly inspect and certify fiber end-faces inside ports or patch cords. It’s 2-second automated PASS/FAIL certification, per IEC 61300-3-35, eliminates human subjectivity and enables anyone to become a fiber inspection expert. Results can be saved in the certification report alongside OptiFiber Pro's OTDR results.




Other Key Features

Extremely short event and attenuation dead zone 

The OptiFiber Pro leverages the most sophisticated optical technology to provide the shortest event dead zone (0.5 m typical for MM) and attenuation dead zone (2.2 m typical for MM and 3.6 m typical for SM) of any OTDR. This technological advancement allows OptiFiber Pro to detect and measure closely spaced faults where no other OTDR can in today’s connector-rich datacenter and storage area environments.



LinkWare™ management software
Leveraging the popular and multi-featured LinkWare cable test management software application, OptiFiber Pro users can easily access the hassle-free project management, report generation, and software upgrade capabilities to manage workflow and consolidate test results.



Two second trace per wavelength 
Another breakthrough with OptiFiber Pro is the data acquisition speed. While in Quick Test mode, a complete set of data is acquired in as little as two seconds per wavelength. OptiFiber Pro then analyzes the data and displays it as an EventMap, Table or Trace. The end result is less time spent testing and more time performing other tasks.



On-screen help – corrective action 
On-screen “help” suggests corrective action(s) for resolving fiber problems during each testing step. The “help” offered is context sensitive which allows users to quickly pinpoint possible resolutions. An easy-to-read, gray icon in the bottom, left-hand corner shows detailed corrective action recommendations.




LinkWare™ Live Test Results Management Service

LinkWare Live is a Test Results Management Service from Fluke Networks for cabling professionals managing multiple projects that quickly, easily and affordably provides unmatched job visibility and superior project control from anywhere at any time.

LinkWare Live provides an easy to read dashboard that shows an overview of the project status and a project activity to ensure projects are completed on time. It removes the hurdles in data management by giving the ability to directly upload and consolidate test results from multiple testers. It allows to quickly validate projects and test results in real-time with browser-based ease to avoid any future rework due to incorrect testing or missing test results. Use any smart device with a browser to validate and check projects or test results. LinkWare™ Cable Test Management Software also connects to the LinkWare Live service enabling you to download test results into the LinkWare Cable Test Management Software to generate professional reports in a common format.

     

OptiFiber Pro Singlemode + 1490 HDR OTDR V2 kit with Wi-Fi (1310, 1490, 1550 NM)

Designed for Enterprise, Datacenter, Outside Plant and PON Fiber

This kit includes (1) Versiv 2 Mainframe, (1) OptiFiber Pro HDR Singlemode +1490 OTDR module (1310, 1490, 1550 nm), Shoulder Strap, USB Interface Cable, Carry Case, AC Charger, Integrated Wi-Fi, Statement of Calibration and Getting Started Guides.

The OptiFiber Pro® Series OTDRs are the Tier 2 (extended) fiber certification solution for Datacenters, Outside Plant (OSP), FTTx and PON environments andare part of the Versiv™ Cabling Certification system. The system includes copper certification and OLTSmodules. Versiv is designed around the revolutionaryProjX™ management system and Taptive™ user interface. ProjX tracks jobs to ensure they're done correctly the first time, thus reducing rework. With the intuitive Taptive user interface, instrument set-up and operation are so simple, even operators with limited cabling skills can successfully test and troubleshoot asystem. Analysis of measurement data and professional test reports are easy with the familiar LinkWare™ management software.




Product Highlights Makes novices into experts and experts faster

• Multiple wavelengths (850, 1300, 1310,1490, 1550 and 1625 nm) support LAN, datacenters, PON, FTTx and outside plant applications.

• Automated setup senses fiber characteristics and sets measurement parameters

• Manual Expert mode allows simple adjustments to automated settings for detailed testing.

• EventMap automatically identifies events including connectors, splices, bends, and splitters

• Gesture-based interface allows fast, in-depth trace analysis

• SmartLoop™ OTDR technology tests two fibers in a single test eliminating the need to travel to the far end of the connection to perform tests.

• Instantaneous on-board bi-directional averaging results included as standard

• Integrates with LinkWare™ Live to manage jobs and testers from any smart device.

• Future-ready VersivTM design supports copper certification to Category 8, fiber loss and inspection.



Fluke Networks' OptiFiber Pro Series OTDRs are designed to make every level of user more efficient whether working in data centers, outside plant, FTTx or PON applications. Novice users can set up and shoot traces in no time by using the Auto OTDR function which analyzes the fiber under test and then choosesappropriate settings. The EventMap™ feature analyzes traces like an expert, calculating overall loss and reflectance, indicating events such as splices, splittersbends and connectors. Experts can use these settings as the starting point for the Expert Manual Mode to experiment with the trace and uncover details ofinterest. OptiFiber Pro features an advanced touchscreen interface with pinch and zoom for analysis that's not only deep, but simple to master.

OptiFiber Pro's patented SmartLoop™ capability enables automated testing and analysis of two fibers in a single test in compliance with standards requirements. Not only does this cut the testing time by at least half, but it also allows the tech to immediately see bi-directional averaged test results without moving the OTDR to the far end or using external software.

As a member of the of the Versiv family, OptiFiber Pro offers a single user interface to cover a wide variety of fiber types and wavelengths: 850, 1300, 1310, 1490, 1550 and 1625 nm along with optional modules for copper and Tier 1 (optical loss) certification and fiber inspection. A single report for an entire job canquickly be generated for all supported media types using the industry standard LinkWare software.




Smartphone User Interface Most OTDRs are designed for a myriad of applications, causing the user interface to be difficult to navigate and interpret. OptiFiber Pro combines the latest “gesture-based” interface technology with a capacitive touchscreen to deliver the most innovative and user-friendly OTDR.

Advantages:

• Single-touch tap and swipe control for selecting and scrolling menu items

• Multi-touch pinch to zoom for easy magnifcation control on a graphical fiber trace

• Task-focused design to reduce back and forth navigation through screens

• Capacitive touchscreen eliminates the need to recalibrate unlike legacy touchscreens

• Context sensitive on-screen help that gives users additional details or problem resolution suggestions



 






At home in the Datacenter With a simple one-touch selection, users enter DataCenter OTDR mode - without setup time for fine-tuning as needed in legacy OTDRs. DataCenter OTDR mode automatically detects OTDR parameters - end-detection algorithms, pulse widths, etc - without getting confused by the short links or number of connectors.

Advantages:

• Ultra-short event and attenuation dead-zones precisely locates events and faults on fiber links in the Enterprise

• DataCenter OTDR™ mode automatically sets the con?guration to quickly test datacenter fiber

• The EventMap feature depicts fiber events in a way that requires no trace analysis expertise



 






Unique certification with flexibility and efficiency With built-in project management, OptiFiber Pro allows a project manager to define each user’s role, settings and the associated tasks to be performed – transforming the OTDR into an all-in-one fiber testing tool complete with planning, inspection, certification and reporting. OptiFiber Pro enhances job efficiency by allowing the workflow planner to create and manage operator and job profiles per project - defined jobs or sets of cable IDs can be assigned to specific operators. The progress and status of each project can also be easily monitored.

Advantages:

• Full OTDR capability that certifies fiber performance based on job assignment for each operator

• Powerful project management facilitates OTDR sharing with clear job assignment for each operator

• Easy monitoring of job progress with pass/fail results

• On-screen report generation and upload to LinkWare™ application



 






Extremely short event and attenuation dead zone for the Enterprise The OptiFiber Pro leverages the most sophisticated optical technology to provide the shortest event dead zone (0.5 m typical for MM) and attenuation dead zone (2.2 m typical for MM and 3.6 m typical for SM) of any OTDR. This technological advancement allows OptiFiber Pro to detect and measure closely spaced faults where no other OTDR can in today’s connector-rich datacenter and storage area environments.



 






Two second trace per wavelength Another breakthrough with OptiFiber Pro is the data acquisition speed. While in Quick Test mode, a complete set of data is acquired in as little as two seconds per wavelength. OptiFiber Pro then analyzes the data and displays it as an EventMap, Table or Trace. The end result is less time spent testing and more time performing other tasks.



 






On-screen help – corrective action On-screen “help” suggests corrective action(s) for resolving ?ber problems during each testing step. The “help” offered is context sensitive which allows users to quickly pinpoint possible resolutions. An easy-to-read, gray icon in the bottom, left-hand corner shows detailed corrective action recommendations.



 






SmartLoop OTDR SmartLoop OTDR enables automated testing and analysis of two fibers in a single test while meeting standard requirements. This patented process automatically separates the two fibers for individual pass/fail analysis, display, and reporting. Not only does this cut the testing time by at least half, it also enables instant bi-directional averaged test results without moving the OTDR to the far end. In addition to getting the job done quicker, SmartLoop OTDR further enhances the ease and speed of testing in environments where the far end is difficult of even dangerous to reach because the OTDR never has to be moved to the far end. In addition to getting the job done quicker, SmartLoop meets the standard's requirements of leaving the launch and tail fibers in their initial locations during both bi-directional tests.



 






Fiber Endface Inspection and Certification OptiFiber Pro incorporates the FiberInspector Pro video inspection system which enables you to quickly inspect and certify fiber end-faces inside ports or patch cords. It’s 1-second automated PASS/FAIL certification, per IEC 61300-3-35, eliminates human subjectivity and enables anyone to become a fiber inspection expert. Results can be saved in the certification report alongside OptiFiber Pro's OTDR results.



 






LinkWare Live Test Results Management Service LinkWare Live is a cloud-based service that lets you manage certification jobs anytime, anywhere, with anyone on any device. With LinkWare Live, you can:

• Keep track of every test on every job. Get an overview of every project from any smart device. Drill down to each individual test. Instantly receive notification of incorrect test setting or cable IDs.

• Get it right the first time. Define cable IDs and test settings from your PC or tablet. Then send them to the testers or Brother printers at the jobsite for mistake-free testing and labeling.

• Keep your testers up to date. Standards can change without notice, and an out-of-date test report can mean hours of re-testing. LinkWare Live automatically ensures your testers are running the latest.

• Stop wasting time and gas driving testers back to the office. Integrated Wi-Fi allows you to upload your test results straight from the job site to LinkWare Live. Then download them automatically to the right job for fast report generation with LinkWare PC.



 






Splitter detection OptiFiber Pro HDR is optimized for FTTx/PON testing through splitters. 1x16 and 1x32 are most commonly found today but OptiFiber Pro HDR is future proofed for testing even nx128 splitters. With its Discover function, you can automatically locate splitters and their ratios. Up to 3 cascaded splitters can be configured in the setup.

OptiFiber Pro HDR provides two PON test suites: Auto PON OTDR and Manual PON OTDR.

Auto PON OTDR - The tester automatically selects settings that give you the best view of the events on OSP (outside plant) cabling. The tester automatically uses the DISCOVER function to identify splitters. This mode is the easiest to use and is the best choice for most applications.

Manual PON OTDR - This mode lets you select settings to control the parameters of the trace. You can also enter the ratios of splitters that you know are on the link, or use the DISCOVER function to locate splitters and identify their ratios.



 






Macrobend detection A bend in a fiber cable, if pulled around a sharp corner for instance, allows light to escape from the fiber’s core. This Macrobend may be a risk for mechanical or optical failure. OptiFiber Pro automatically identifies bends and their location by comparing the loss of an event at multiple wavelengths.



 






Performance: • Test times as short as two seconds in Quick Test mode

• Quickly test datacenter fiber with pre-programmed settings

• Auto OTDR modes analyze fiber runs to set key parameters: Range, Pulse Width, and Averaging Time, enabling any user to test like an expert. Expert Manual Mode allows users to easily modify these parameters to zero in on important details

• Troubleshoot datacenter fiber links with short patch cables and many connectors because of ultra short dead zones

• Easily characterize all connectors, splices and areas of high loss with graphical EventMap view

• Pass/Fail certification of fiber optic connector endfaces

• Document-only reporting for OSP applications

• ProjX management system increases return on investment by reducing errors

• Reduce network downtime by quickly and precisely identifying faults on all fiber types

• Built-in Visual Fault Locator (VFL) easily identifies damaged fibers




Product Diagram:

1. LCD display with touchscreen.

2. Singlemode OTDR port with an APC endface, interchangeable SC adapter, and protective cap. The LED in front of the port turns on when the port emits an optical signal.

3. Visual fault locator port and protective cap. The LED in front of the port turns on when the port emits an optical signal.

4. Button that controls the VFL

5. Micro USB port: This USB port lets you connect the tester to a PC so you can upload test results to the PC and install software updates in the tester.

6. Type A USB port: This USB host port lets you save test results on a USB flash drive and connect the FI-1000 video probe to the tester. Versiv: Also lets you connect a Wi-Fi adapter for access to Fluke Networks cloud services.

7. Headset jack

8. Test button. To start a test, you can also tap TEST on the display.

9. Power button. Versiv 2: The LED in the power button shows the status of the battery charging process. See the Users Manual.

10. Home button. Press HOME to go to the home screen.

11. Connector for the AC adapter. Versiv: The LED is red when the battery charges, and green when the battery is fully charged. The LED is yellow if the battery will not charge

12. RJ45 connector: Lets you connect to a network for access to FlukeNetworks cloud services

13. Decal with laser safety information

 



Full specification and details can be found in the Product Datasheet PDF file

An instruction manual can be found in the Product Datasheet PDF file

OptiFiber Pro HDR OTDR V2 kit with Wi-Fi (1310, 1550, 1625 nm)

Designed for Enterprise, Datacenter, Outside Plant and PON Fiber

OptiFiber Pro Singlemode + 1625 HDR OTDR V2 kit with Wi-Fi. This kit includes (1) Versiv 2 Mainframe, (1) OptiFiber Pro HDR Singlemode OTDR module (1310, 1550, 1625 nm), Shoulder Strap, USB Interface Cable, Carry Case, AC Charger, Integrated Wi-Fi, Statement of Calibration and Getting Started Guides.




Product Highlights Makes novices into experts and experts faster

• Multiple wavelengths (850, 1300, 1310,1490, 1550 and 1625 nm) support LAN, data centers, PON, FTTx and outside plant applications.

• Automated setup senses fiber characteristics and sets measurement parameters

• Manual Expert mode allows simple adjustments to automated settings for detailed testing.

• EventMap automatically identifies events including connectors, splices, bends, and splitters

• Gesture-based interface allows fast, in-depth trace analysis

• SmartLoop™ OTDR technology tests two fibers in a single test eliminating the need to travel to the far end of the connection to perform tests.

• Instantaneous on-board bi-directional averaging results included as standard

• Integrates with LinkWare™ Live to manage jobs and testers from any smart device.

• Future-ready VersivTM design supports copper certification to Category 8, fiber loss and inspection.



Fluke Networks' OptiFiber Pro Series OTDRs are designed to make every level of user more efficient whether working in data centers, outside plant, FTTx or PON applications. Novice users can set up and shoot traces in no time by using the Auto OTDR function which analyzes the fiber under test and then chooses appropriate settings. The EventMap™ feature analyzes traces like an expert, calculating overall loss and reflectance, indicating events such as splices, splitters bends and connectors. Experts can use these settings as the starting point for the Expert Manual Mode to experiment with the trace and uncover details of interest. OptiFiber Pro features an advanced touchscreen interface with pinch and zoom for analysis that's not only deep, but simple to master.

OptiFiber Pro's patented SmartLoop™ capability enables automated testing and analysis of two fibers in a single test in compliance with standards requirements. Not only does this cut the testing time by at least half, but it also allows the tech to immediately see bi-directional averaged test results without moving the OTDR to the far end or using external software.

As a member of the of the Versiv family, OptiFiber Pro offers a single user interface to cover a wide variety of fiber types and wavelengths: 850, 1300, 1310, 1490, 1550 and 1625 nm along with optional modules for copper and Tier 1 (optical loss) certification and fiber inspection. A single report for an entire job can quickly be generated for all supported media types using the industry standard LinkWare software.




Smartphone User Interface Most OTDRs are designed for a myriad of applications, causing the user interface to be difficult to navigate and interpret. OptiFiber Pro combines the latest “gesture-based” interface technology with a capacitive touchscreen to deliver the most innovative and user-friendly OTDR.

Advantages:

• Single-touch tap and swipe control for selecting and scrolling menu items

• Multi-touch pinch to zoom for easy magnification control on a graphical fiber trace

• Task-focused design to reduce back and forth navigation through screens

• Capacitive touchscreen eliminates the need to recalibrate unlike legacy touchscreens

• Context sensitive on-screen help that gives users additional details or problem resolution suggestions



 






At home in the Datacenter With a simple one-touch selection, users enter DataCenter OTDR mode - without setup time for fine-tuning as needed in legacy OTDRs. DataCenter OTDR mode automatically detects OTDR parameters - end-detection algorithms, pulse widths, etc - without getting confused by the short links or number of connectors.

Advantages:

• Ultra-short event and attenuation dead-zones precisely locates events and faults on fiber links in the Enterprise

• DataCenter OTDR™ mode automatically sets the configuration to quickly test datacenter fiber

• The EventMap feature depicts fiber events in a way that requires no trace analysis expertise



 






Unique certification with flexibility and efficiency With built-in project management, OptiFiber Pro allows a project manager to define each user’s role, settings and the associated tasks to be performed – transforming the OTDR into an all-in-one fiber testing tool complete with planning, inspection, certification and reporting. OptiFiber Pro enhances job efficiency by allowing the workflow planner to create and manage operator and job profiles per project - defined jobs or sets of cable IDs can be assigned to specific operators. The progress and status of each project can also be easily monitored.

Advantages:

• Full OTDR capability that certifies fiber performance based on job assignment for each operator

• Powerful project management facilitates OTDR sharing with clear job assignment for each operator

• Easy monitoring of job progress with pass/fail results

• On-screen report generation and upload to LinkWare™ application



 






Extremely short event and attenuation dead zone for the Enterprise The OptiFiber Pro leverages the most sophisticated optical technology to provide the shortest event dead zone (0.5 m typical for MM) and attenuation dead zone (2.2 m typical for MM and 3.6 m typical for SM) of any OTDR. This technological advancement allows OptiFiber Pro to detect and measure closely spaced faults where no other OTDR can in today’s connector-rich datacenter and storage area environments.



 






Two second trace per wavelength Another breakthrough with OptiFiber Pro is the data acquisition speed. While in Quick Test mode, a complete set of data is acquired in as little as two seconds per wavelength. OptiFiber Pro then analyzes the data and displays it as an EventMap, Table or Trace. The end result is less time spent testing and more time performing other tasks.



 






On-screen help – corrective action On-screen “help” suggests corrective action(s) for resolving fiber problems during each testing step. The “help” offered is context sensitive which allows users to quickly pinpoint possible resolutions. An easy-to-read, gray icon in the bottom, left-hand corner shows detailed corrective action recommendations.



 






SmartLoop OTDR SmartLoop OTDR enables automated testing and analysis of two fibers in a single test while meeting standard requirements. This patented process automatically separates the two fibers for individual pass/fail analysis, display, and reporting. Not only does this cut the testing time by at least half, it also enables instant bi-directional averaged test results without moving the OTDR to the far end. In addition to getting the job done quicker, SmartLoop OTDR further enhances the ease and speed of testing in environments where the far end is difficult of even dangerous to reach because the OTDR never has to be moved to the far end. In addition to getting the job done quicker, SmartLoop meets the standard's requirements of leaving the launch and tail fibers in their initial locations during both bi-directional tests.



 






Fiber Endface Inspection and Certification OptiFiber Pro incorporates the FiberInspector Pro video inspection system which enables you to quickly inspect and certify fiber end-faces inside ports or patch cords. It’s 1-second automated PASS/FAIL certification, per IEC 61300-3-35, eliminates human subjectivity and enables anyone to become a fiber inspection expert. Results can be saved in the certification report alongside OptiFiber Pro's OTDR results.



 






LinkWare Live Test Results Management Service LinkWare Live is a cloud-based service that lets you manage certification jobs anytime, anywhere, with anyone on any device. With LinkWare Live, you can:

• Keep track of every test on every job. Get an overview of every project from any smart device. Drill down to each individual test. Instantly receive notification of incorrect test setting or cable IDs.

• Get it right the first time. Define cable IDs and test settings from your PC or tablet. Then send them to the testers or Brother printers at the jobsite for mistake-free testing and labeling.

• Keep your testers up to date. Standards can change without notice, and an out-of-date test report can mean hours of re-testing. LinkWare Live automatically ensures your testers are running the latest.

• Stop wasting time and gas driving testers back to the office. Integrated Wi-Fi allows you to upload your test results straight from the job site to LinkWare Live. Then download them automatically to the right job for fast report generation with LinkWare PC.



 






Splitter detection OptiFiber Pro HDR is optimized for FTTx/PON testing through splitters. 1x16 and 1x32 are most commonly found today but OptiFiber Pro HDR is future proofed for testing even nx128 splitters. With its Discover function, you can automatically locate splitters and their ratios. Up to 3 cascaded splitters can be configured in the setup.

OptiFiber Pro HDR provides two PON test suites: Auto PON OTDR and Manual PON OTDR.

Auto PON OTDR - The tester automatically selects settings that give you the best view of the events on OSP (outside plant) cabling. The tester automatically uses the DISCOVER function to identify splitters. This mode is the easiest to use and is the best choice for most applications.

Manual PON OTDR - This mode lets you select settings to control the parameters of the trace. You can also enter the ratios of splitters that you know are on the link, or use the DISCOVER function to locate splitters and identify their ratios.



 






Macrobend detection A bend in a fiber cable, if pulled around a sharp corner for instance, allows light to escape from the fiber’s core. This Macrobend may be a risk for mechanical or optical failure. OptiFiber Pro automatically identifies bends and their location by comparing the loss of an event at multiple wavelengths.



 






Performance: • Test times as short as two seconds in Quick Test mode

• Quickly test datacenter fiber with pre-programmed settings

• Auto OTDR modes analyze fiber runs to set key parameters: Range, Pulse Width, and Averaging Time, enabling any user to test like an expert. Expert Manual Mode allows users to easily modify these parameters to zero in on important details

• Troubleshoot datacenter fiber links with short patch cables and many connectors because of ultra short dead zones

• Easily characterize all connectors, splices and areas of high loss with graphical EventMap view

• Pass/Fail certification of fiber optic connector endfaces

• Document-only reporting for OSP applications

• ProjX management system increases return on investment by reducing errors

• Reduce network downtime by quickly and precisely identifying faults on all fiber types

• Built-in Visual Fault Locator (VFL) easily identifies damaged fibers




Product Diagram:

1. LCD display with touchscreen.

2. Singlemode OTDR port with an APC endface, interchangeable SC adapter, and protective cap. The LED in front of the port turns on when the port emits an optical signal.

3. Visual fault locator port and protective cap. The LED in front of the port turns on when the port emits an optical signal.

4. Button that controls the VFL

5. Micro USB port: This USB port lets you connect the tester to a PC so you can upload test results to the PC and install software updates in the tester.

6. Type A USB port: This USB host port lets you save test results on a USB flash drive and connect the FI-1000 video probe to the tester. Versiv: Also lets you connect a Wi-Fi adapter for access to Fluke Networks cloud services.

7. Headset jack

8. Test button. To start a test, you can also tap TEST on the display.

9. Power button. Versiv 2: The LED in the power button shows the status of the battery charging process. See the Users Manual.

10. Home button. Press HOME to go to the home screen.

11. Connector for the AC adapter. Versiv: The LED is red when the battery charges, and green when the battery is fully charged. The LED is yellow if the battery will not charge

12. RJ45 connector: Lets you connect to a network for access to FlukeNetworks cloud services

13. Decal with laser safety information

 



Full specification and details can be found in the Product Datasheet PDF file

An instruction manual can be found in the Product Datasheet PDF file