Excel Cat6

Cat6 UTP Excel RJ45 Shuttered Module

Excel Category 6 UTP Modules meet all current draft specifications for Category 6 connecting hardware. When installed with Excel Category 6 cables and patch panels full link and channel compliance can also be achieved. These outlets also provide backward compatibility with the Category 5 and 5e systems and interoperability with alternative Category 6 offerings. Product design is based around the established Category 5e module and provide quick and easy termination using LSA compatible tooling. Port identification can be completed by use of either the integral slide label or simple application of an adhesive icon 

Please Note: These modules are designed to fit only into Excel Faceplates found Here

Features Supports Gigabit Ethernet
Category 6
25 x 50mm Euromod Size
Power Sum Compliant
Backward Compatible
LSA Style Termination Blocks
Built in Slide Label System
One Piece, Snap-in Design
Integral Cable Tie Position


Performance Overview

Excel Category 6 data outlets are manufactured and tested to the Category 6 performance standards. A range of performance characteristics are tested upto 250MHz including return loss, attenuation and near and far end crosstalk (NEXT and FEXT) for which both worst case and power sum tests are completed. Actual performance far exceeds the required standard - when tested in isolation and in circuit - resulting in significant headroom for even the most demanding of applications. 

As well as providing link and channel compliance - when installed with Excel category 6 components – with the aforementioned specification - the outlet is also backward compatible with Category 5 and 5e components.

Pre-assembled faceplates can be ordered to save installation time.

Cat6 UTP Excel RJ45 Shuttered Module

Excel Category 6 UTP Modules meet all current draft specifications for Category 6 connecting hardware. When installed with Excel Category 6 cables and patch panels full link and channel compliance can also be achieved. These outlets also provide backward compatibility with the Category 5 and 5e systems and interoperability with alternative Category 6 offerings. Product design is based around the established Category 5e module and provide quick and easy termination using LSA compatible tooling. Port identification can be completed by use of either the integral slide label or simple application of an adhesive icon 

Please Note: These modules are designed to fit only into Excel Faceplates found Here

Features Supports Gigabit Ethernet
Category 6
25 x 50mm Euromod Size
Low Profile Design
Power Sum Compliant
LSA Style Termination Blocks
Built in Slide Label System
One Piece, Snap-in Design
Integral Cable Tie Position


Performance Overview

Excel Category 6 data outlets are manufactured and tested to the Category 6 performance standards. A range of performance characteristics are tested upto 250MHz including return loss, attenuation and near and far end crosstalk (NEXT and FEXT) for which both worst case and power sum tests are completed. Actual performance far exceeds the required standard - when tested in isolation and in circuit - resulting in significant headroom for even the most demanding of applications. 

Pre-assembled faceplates can be ordered to save installation time.

UTP RJ45 Cat5e Shuttered Module - LJ6C Size

Excel Category 6 6C RJ45 modules comply with the standards for Category 6. Each shuttered module is supplied with a slide label field and space above, this is allowed for use of self adhesive or further labelling if required. Termination can be made using LSA compatible tooling. The low profile and 6C cut out design makes this module ideal for installations in floor box environments or shallow dado trunking

Features Supports Gigabit Ethernet
Category 6
6C design (22mm wide x 37mm high x 28.4mm deep)
Power Sum Compliant
LSA Style Termination Blocks
Built in Slide Label System


Performance Overview

Excel Category 6 data outlets are manufactured and tested to the Category 6 performance standards. A range of performance characteristics are tested upto 250MHz including return loss, attenuation and near and far end crosstalk (NEXT and FEXT) for which both worst case and power sum tests are completed. Actual performance far exceeds the required standard - when tested in isolation and in circuit - resulting in significant headroom for even the most demanding of applications.  

As well as providing link and channel compliance - when installed with Excel category 6 components – with the aforementioned specification - the outlet is also backward compatible with Category 5 and 5e components.

The Excel 3 in 1 module offers the ultimate in flexibility, space utilisation and ease of installation. The totally modular design allows the mounting of up to 3 shuttered RJ45 ports in a standard flat or bevelled single gang faceplate or up to 6 in a double gang fascia. The unique design means that you only load shuttered outlets as required, any capacity within the plate which is required for a later date is simply blanked off, providing a neat and easy to use completed installation. Individual port labelling is also quick and easy with standard Excel outlet slide in fields incorporated into the design.

Features

Category 6 compliant
High density design
Individual snap in modules
Fit standard Excel Faceplates (3 required for Single Faceplates, 6 required for Double Faceplates)
LSA compatible IDC
Individual port slide labelling system
Module dimensions 16.6(w) x 50(h) x 31.5(d) mm
Please Note: These modules are designed to fit only into Excel Faceplates found Here

Performance Overview

Excel Category 6 data outlets are manufactured and tested to the Category 6 performance standards. A range of performance characteristics are tested upto 250MHz including return loss, attenuation and near and far end crosstalk (NEXT and FEXT) for which both worst case and power sum tests are completed. Actual performance far exceeds the required standard - when tested in isolation and in circuit - resulting in significant headroom for even the most demanding of applications.  

As well as providing link and channel compliance - when installed with Excel category 6 components – with the aforementioned specification - the outlet is also backward compatible with Category 5 and 5e components.

Pre-assembled faceplates can be ordered to save installation time.

The Excel 6 Port Category 6 Modules offer a flexible and quick way to terminate and install structured cabling.
Manufactured from high impact flame retardant plastic the modules use IDC punch downs for the termination of the copper cables.

The incoming cables are secured in place with cable ties resulting in a fully covered termination.

After termination the module is simply fitted to one of the compatible Excel Mixed Use Patch Panels permitting different categories of Fibre and Copper to be presented on the same panel.

The modules are easily fitted and removed from the rear of the patch panel by activating release latches.

The Excel Unscreened Category 6 Module has been independently verified by Delta confirming component level performance of the product.

Features:
6 Port Unscreened Module
Cables entering module are individually secured
4 & 8 Module Patch Panel Frames
Toolless assembly and patch panel fitting
Delta Third Party Verified - Component Level
Compatible with Excel Mixed Use Panel

Excel 6 Port Screened Category 6 Modules offer a flexible and quick way to terminate and install structured cabling.
Manufactured from from die cast metal the modules use IDC punch downs for the termination of the copper cables.

The incoming cables are secured in place with clamps that bonds the screen to the module. The design of the module ensures that screening is provided between ports. After termination the module is simply fitted to one of the compatible Excel Mixed Use Patch Panels permitting different categories of Fibre and Copper to be presented on the same panel.

The modules are easily fitted and removed from the rear of the patch panel by activating release latches.

The Excel Screened Category 6 Module has been independently verified by Delta confirming component level performance of the product.

Features:
6 Port Screened Module
Cables entering module are individually secured
4 & 8 Module Patch Panel Frames
Delta Third Party Verified - Component Level
Compatible with Excel Mixed Use Panel

Excel 6 Port Screened Category 6A Modules offer a flexible and quick way to terminate and install structured cabling.
Manufactured from from die cast metal the modules use IDC punch downs for the termination of the copper cables.

The incoming cables are secured in place with clamps that bond the screen to the module. The design of the module ensures that screening is provided between ports. After termination the module is simply fitted to one of the compatible Excel Mixed Use Patch Panels permitting different categories of Fibre and Copper to be presented on the same panel.

The modules are easily fitted and removed from the rear of the patch panel by activating release latches.

The Excel Screened Category 6A Module has been independently verified by Delta confirming component level performance of the product.

Features:
6 Port Screened Module
Cables entering module are individually secured
4 & 8 Module Patch Panel Frames
Delta Third Party Verified - Component Level
Compatible with Excel Mixed Use Panel