Eaton 5P

Product Overview

Eaton 5P UPS, Global, 1U UPS, 1550 VA, 1100W, Input: (1) C14, Outputs: (6) C13, Rackmount/Wallmount, Lithium-ion battery, true sine wave, network card optional, with BS input cord

General Specifications

Secondary Frequency - Max 60 Hz Output Waveform Sine wave Wattage 1100 W Output Power Factor 0.7 Form Factor Rack Mounting Method Rackmount Includes Network Card No Input Connection C14 Input Voltage - Min 150 V Output Voltage - Max 240 V Secondary Frequency - Min 50 Hz Software Compatibility Eaton Intelligent Power Manager (included) Battery Replacement User replaceable Battery Type Lithium-ion Efficiency 97 Special Features Eaton 5P UPS with lithium-ion batteries Construction Type 482.6 mm (19 inch) device Output Voltage - Min 200 V Colour Black/silver Topology Line-interactive BTU Rating Online: 113, Battery 714 Runtime At Half Load 11 min Input Power Factor 1 Input Frequency Range 47-70 Hz (50 Hz system), 56.5-70 Hz (60 Hz system), 40-70 Hz in low-sensitivity mode Input Voltage - Max 294 V Voltage Type AC Phase (Output) 1 Battery Management Integrated battery management system (BMS) for temperature regulation and life cycle monitoring Auto Shutdown Function Yes Number Of Outputs C13 6 VA Rating 1550 VA Potential Free Switch Contact Yes Receptacle (6) C13 Phase (Input) 1 Package Contents UPS, Quick start guide, USB cable, RS-232 serial cable, 4-post rail kit, 2 IEC-to-IEC jumper cables, Output cable locking system, BS input cord

The Eaton 5P is a 650VA line interactive UPS with the Automatic Voltage Regulation (AVR), a sinewave output and an advanced, multilingual LCD display with energy metering features. The 5P possesses 4IEC outlets including 2 remotely manageable outlets and hot swappable batteries. In order to increase battery lifetime, this UPS includes the Advanced Battery Management (ABM) technology. The 5P also features a connector for remote power off or remote on off function.

Key Features

On-line double conversion topology, with automatic by-pass and PFC system
Energy efficient UPS with up to 94% efficiency in Online mode and 98% in Hi-efficiency Mode
External Maintenance Bypass as standard for service continutity
Compatibility with power factor corrected power supplies (ratio W/VA=0.9)
Parallel operation up to 2 UPSs (redundancy or power extension)
Easy to operate : next-generation multilingual LCD display
Energy metering accessible through LCD and Software
1 USB port + 1 Serial + 4 dry contacts (DB9)
Monitoring & shutdown software for VMware, Hyper-V, Citrix Xen, Windows, Linux, SUN Solaris, HP-UX, IBM AIX
1 Slot for optional com card (Network Management card, ModBus/Jbus or Contacts/Serial cards)
Advance Battery Management (ABM) technology to increase battery lifetime
Long backup time with up to 12 optional EBM cabinets
Connectors for Remote power off or remote OFF/ON function
Manageability

The graphical LCD display provides clear information on the UPS's status and measurements on a single screen (in seven languages). Enhanced configuration capabilities are also available with easy-to-use navigation keys. Load segment control enables prioritized shutdowns of nonessential equipment during outages in order to maximize battery runtime for critical devices. Load segment control can also be used to remotely reboot locked-up network equipment or to manage scheduled shutdowns and sequential start-ups.

Performance and efficiency

Energy efficient UPS: with an optimized electrical design, the 5P provides up to 98% efficiency, reducing cooling and utility costs.

Pure sinewave output

When operating in battery mode, the 5P provides a high quality output signal for any sensitive equipment connected, such as active PFC (power factor corrected) servers.

Adjustable tolerance and sensitivity

Users can maximize useful battery life by widening the input voltage window or adjustable input waveform sensitivity (via the LCD or software) to adapt the UPS to a specific environment (like Genset).

Stronger, longer battery life

Eaton ABM battery management technology uses an innovative three-stage charging technique that extends batteries by up to 50%.

UPS Layout

Graphical LCD
Panel for batteries replacement (Hot swappable)
One USB port + one serial port + remote ON/OFF and remote power OFF connector
4 IEC 10A sockets (including two groups of controlled sockets)
Communication card slot
 

The Eaton 5P is a 650VA line interactive rack UPS with the Automatic Voltage Regulation (AVR), a sinewave output and an advanced, multilingual LCD display with energy metering features. The 5P possesses 4IEC outlets including 2 remotely manageable outlets and hot swappable batteries. In order to increase battery lifetime, this UPS includes the Advanced Battery Management (ABM) technology. The 5P also features a connector for remote power off or remote on off function.
Key Features Next-generation graphical LCD display (7 languages)
Energy metering
Energy efficient (up to 98% efficiency)
Advance Battery Management (ABM)
Switched outlet groups
Manageability The graphical LCD display provides clear information on the UPS's status and measurements on a single screen (in seven languages). Enhanced configuration capabilities are also available with easy-to-use navigation keys. Load segment control enables prioritized shutdowns of nonessential equipment during outages in order to maximize battery runtime for critical devices. Load segment control can also be used to remotely reboot locked-up network equipment or to manage scheduled shutdowns and sequential start-ups.


Performance and efficiency Energy efficient UPS: with an optimized electrical design, the 5P provides up to 98% efficiency, reducing cooling and utility costs.


Pure sinewave output When operating in battery mode, the 5P provides a high quality output signal for any sensitive equipment connected, such as active PFC (power factor corrected) servers.


Adjustable tolerance and sensitivity Users can maximize useful battery life by widening the input voltage window or adjustable input waveform sensitivity (via the LCD or software) to adapt the UPS to a specific environment (like Genset).


Stronger, longer battery life Eaton ABM battery management technology uses an innovative three-stage charging technique that extends batteries by up to 50%.

The Eaton 5P is a 850VA line interactive UPS with the Automatic Voltage Regulation (AVR), a sinewave output and an advanced, multilingual LCD display with energy metering features. The 5P possesses 6 IEC outlets including 3 remotely manageable outlets and hot swappable batteries. In order to increase battery lifetime, this UPS includes the Advanced Battery Management (ABM) technology. The 5P also features a connector for remote power off or remote on off function.The Eaton 5P is a 850VA line interactive rack UPS with the Automatic Voltage Regulation (AVR), a sinewave output and an advanced, multilingual LCD display with energy metering features.

The 5P possesses 6 IEC outlets including 3 remotely manageable outlets and hot swappable batteries. In order to increase battery lifetime, this UPS includes the Advanced Battery Management (ABM) technology. The 5P also features a connector for remote power off or remote on off function.

Key Features

Switched outlet groups
Advance Battery Management (ABM)
Energy efficient (up to 98% efficiency)
Energy metering
Next-generation graphical LCD display (7 languages)
Manageability

The graphical LCD display provides clear information on the UPS's status and measurements on a single screen (in seven languages). Enhanced configuration capabilities are also available with easy-to-use navigation keys. Load segment control enables prioritized shutdowns of nonessential equipment during outages in order to maximize battery runtime for critical devices. Load segment control can also be used to remotely reboot locked-up network equipment or to manage scheduled shutdowns and sequential start-ups.

Performance and efficiency

Energy efficient UPS: with an optimized electrical design, the 5P provides up to 98% efficiency, reducing cooling and utility costs.

Pure sinewave output

When operating in battery mode, the 5P provides a high quality output signal for any sensitive equipment connected, such as active PFC (power factor corrected) servers.

Adjustable tolerance and sensitivity

Users can maximize useful battery life by widening the input voltage window or adjustable input waveform sensitivity (via the LCD or software) to adapt the UPS to a specific environment (like Genset).

Stronger, longer battery life

Eaton ABM battery management technology uses an innovative three-stage charging technique that extends batteries by up to 50%.

UPS Layout

Graphical LCD
Panel for batteries replacement (Hot swappable)
One USB port + one serial port + remote ON/OFF and remote power OFF connector
6 IEC 10A sockets (including two groups of controlled sockets)
Communication card slot
 

The Eaton 5P is a 850VA line interactive rack UPS with the Automatic Voltage Regulation (AVR), a sinewave output and an advanced, multilingual LCD display with energy metering features. The 5P possesses 4 IEC outlets including 3 remotely manageable outlets and hot swappable batteries. In order to increase battery lifetime, this UPS includes the Advanced Battery Management (ABM) technology. The 5P also features a connector for remote power off or remote on off function.

Key Features

Switched outlet groups
Advance Battery Management (ABM)
Energy efficient (up to 98% efficiency)
Energy metering
Next-generation graphical LCD display (7 languages)
Manageability

The graphical LCD display provides clear information on the UPS's status and measurements on a single screen (in seven languages). Enhanced configuration capabilities are also available with easy-to-use navigation keys. Load segment control enables prioritized shutdowns of nonessential equipment during outages in order to maximize battery runtime for critical devices. Load segment control can also be used to remotely reboot locked-up network equipment or to manage scheduled shutdowns and sequential start-ups.

Performance and efficiency

Energy efficient UPS: with an optimized electrical design, the 5P provides up to 98% efficiency, reducing cooling and utility costs.

Pure sinewave output

When operating in battery mode, the 5P provides a high quality output signal for any sensitive equipment connected, such as active PFC (power factor corrected) servers.

Adjustable tolerance and sensitivity

Users can maximize useful battery life by widening the input voltage window or adjustable input waveform sensitivity (via the LCD or software) to adapt the UPS to a specific environment (like Genset).

Stronger, longer battery life

Eaton ABM battery management technology uses an innovative three-stage charging technique that extends batteries by up to 50%.

The Eaton 5P is a 1150VA line interactive UPS with the Automatic Voltage Regulation (AVR), a sinewave output and an advanced, multilingual LCD display with energy metering features. The 5P possesses 8 IEC outlets including 4 remotely manageable outlets and hot swappable batteries. In order to increase battery lifetime, this UPS includes the Advanced Battery Management (ABM) technology. The 5P also features a connector for remote power off or remote on off function.

Key Features Next-generation graphical LCD display (7 languages)
Energy metering
Energy efficient (up to 98% efficiency)
Advance Battery Management (ABM)
Switched outlet groups
Switched outlet groups
Manageability The graphical LCD display provides clear information on the UPS's status and measurements on a single screen (in seven languages). Enhanced configuration capabilities are also available with easy-to-use navigation keys. Load segment control enables prioritized shutdowns of nonessential equipment during outages in order to maximize battery runtime for critical devices. Load segment control can also be used to remotely reboot locked-up network equipment or to manage scheduled shutdowns and sequential start-ups.


Performance and efficiency Energy efficient UPS: with an optimized electrical design, the 5P provides up to 98% efficiency, reducing cooling and utility costs.


Pure sinewave output When operating in battery mode, the 5P provides a high quality output signal for any sensitive equipment connected, such as active PFC (power factor corrected) servers.


Adjustable tolerance and sensitivity Users can maximize useful battery life by widening the input voltage window or adjustable input waveform sensitivity (via the LCD or software) to adapt the UPS to a specific environment (like Genset).


Stronger, longer battery life Eaton ABM battery management technology uses an innovative three-stage charging technique that extends batteries by up to 50%.






Graphical LCD
Panel for batteries replacement (Hot swappable)
One USB port + one serial port + remote ON/OFF and remote power OFF connector
8 IEC 10A sockets (including two groups of controlled sockets)
Communication card slot

The Eaton 5P is a 1150VA line interactive rack UPS with the Automatic Voltage Regulation (AVR), a sinewave output and an advanced, multilingual LCD display with energy metering features. The 5P possesses 6 IEC outlets including 4 remotely manageable outlets and hot swappable batteries. In order to increase battery lifetime, this UPS includes the Advanced Battery Management (ABM) technology. The 5P also features a connector for remote power off or remote on off function. Key Features Next-generation graphical LCD display (7 languages)
Energy metering
Energy efficient (up to 98% efficiency)
Advance Battery Management (ABM)
Switched outlet groups
Switched outlet groups
Manageability The graphical LCD display provides clear information on the UPS's status and measurements on a single screen (in seven languages). Enhanced configuration capabilities are also available with easy-to-use navigation keys. Load segment control enables prioritized shutdowns of nonessential equipment during outages in order to maximize battery runtime for critical devices. Load segment control can also be used to remotely reboot locked-up network equipment or to manage scheduled shutdowns and sequential start-ups.


Performance and efficiency Energy efficient UPS: with an optimized electrical design, the 5P provides up to 98% efficiency, reducing cooling and utility costs.


Pure sinewave output When operating in battery mode, the 5P provides a high quality output signal for any sensitive equipment connected, such as active PFC (power factor corrected) servers.


Adjustable tolerance and sensitivity Users can maximize useful battery life by widening the input voltage window or adjustable input waveform sensitivity (via the LCD or software) to adapt the UPS to a specific environment (like Genset).


Stronger, longer battery life Eaton ABM battery management technology uses an innovative three-stage charging technique that extends batteries by up to 50%.

The Eaton 5P is a 1550VA line interactive UPS with the Automatic Voltage Regulation (AVR), a sinewave output and an advanced, multilingual LCD display with energy metering features. The 5P possesses 8 IEC outlets including 4 remotely manageable outlets and hot swappable batteries. In order to increase battery lifetime, this UPS includes the Advanced Battery Management (ABM) technology. The 5P also features a connector for remote power off or remote on off function.

Key Features

Switched outlet groups
Advance Battery Management (ABM)
Energy efficient (up to 98% efficiency)
Energy metering
Next-generation graphical LCD display (7 languages)
Manageability

The graphical LCD display provides clear information on the UPS's status and measurements on a single screen (in seven languages). Enhanced configuration capabilities are also available with easy-to-use navigation keys. Load segment control enables prioritized shutdowns of nonessential equipment during outages in order to maximize battery runtime for critical devices. Load segment control can also be used to remotely reboot locked-up network equipment or to manage scheduled shutdowns and sequential start-ups.

Performance and efficiency

Energy efficient UPS: with an optimized electrical design, the 5P provides up to 98% efficiency, reducing cooling and utility costs.

Pure sinewave output

When operating in battery mode, the 5P provides a high quality output signal for any sensitive equipment connected, such as active PFC (power factor corrected) servers.

Adjustable tolerance and sensitivity

Users can maximize useful battery life by widening the input voltage window or adjustable input waveform sensitivity (via the LCD or software) to adapt the UPS to a specific environment (like Genset).

Stronger, longer battery life

Eaton ABM battery management technology uses an innovative three-stage charging technique that extends batteries by up to 50%.

UPS Layout

  Graphical LCD
Panel for batteries replacement (Hot swappable)
One USB port + one serial port + remote ON/OFF and remote power OFF connector
8 IEC 10A sockets (including two groups of controlled sockets)
Communication card slot