Corsair RAM Desktop Memory Kit

The Corsair CMK32X5M2E60Z36 Vengeance 32GB DDR5 memory kit brings 6000 MT/s performance to compatible desktop systems through a 2 x 16GB dual-channel configuration. With CL36 timings, a 1.35V tested voltage and support for both AMD EXPO and Intel XMP profiles, it provides a practical memory upgrade for gaming, content creation, multitasking and demanding desktop applications.

Key Features of Corsair CMK32X5M2E60Z36 32GB total capacity supplied as 2 x 16GB memory modules
DDR5 memory technology for compatible desktop PCs
6000 MT/s tested memory speed
CL36 tested latency with 36-44-44-96 timings
1.35V tested voltage with 1.1V SPD voltage
Supports AMD EXPO and Intel XMP memory profiles
288-pin UDIMM form factor
Aluminium heat spreader for effective heat dissipation
Onboard power management for controlled memory operation
Compatible with selected AMD 600/800 Series and Intel 600/700/800 Series platforms
High-Speed DDR5 Memory With a rated speed of 6000 MT/s, this Vengeance kit provides greater memory bandwidth for modern processors and demanding desktop workloads. The increased DDR5 throughput can help systems handle applications that frequently move large amounts of data between the processor and memory.

Dual-Channel 32GB Capacity The 2 x 16GB configuration provides 32GB of total memory while allowing compatible motherboards to operate the modules across two memory channels. This makes the kit well suited to users who regularly work with multiple applications, large projects, browser-heavy workloads or modern games.

AMD EXPO and Intel XMP Support AMD EXPO and Intel XMP profiles make it easier to apply the memory's rated settings through a compatible motherboard BIOS. The dual-profile support gives users flexibility when pairing the modules with supported AMD or Intel desktop platforms.

Aluminium Heat Spreader An aluminium heat spreader helps transfer heat away from the memory modules during extended use while giving the Vengeance kit a compact appearance suitable for a variety of desktop PC builds. The modules also use onboard power management for controlled voltage delivery.

The Corsair CMH32X5M2E60Z36 Vengeance RGB 32GB DDR5 memory kit combines 6000 MT/s performance with dynamic RGB lighting across two 16GB modules. With 36-44-44-96 tested timings, a 1.35V tested voltage and support for both AMD EXPO and Intel XMP profiles, it provides a strong fit for modern DDR5 desktop systems, gaming PCs and demanding multitasking workloads. The aluminium heat spreaders help move heat away from the modules, while iCUE support provides control over the integrated ten-zone RGB lighting.

Key Features of Corsair CMH32X5M2E60Z36 32GB total memory capacity with 2 x 16GB modules
DDR5 memory technology
Up to 6000 MT/s tested speed
36-44-44-96 tested latency
1.35V tested voltage
AMD EXPO and Intel XMP compatible
Dynamic ten-zone RGB lighting
CORSAIR iCUE software support
PC5-48000 DDR5-6000 speed rating
288-pin UDIMM format
Aluminium heat spreader
Custom performance PCB
6000 MT/s DDR5 Performance With a tested speed of up to 6000 MT/s, this memory kit provides high bandwidth for modern desktop applications, gaming and demanding workloads. The 32GB capacity also gives users additional room for running multiple applications at the same time.

Dynamic RGB Illumination Each module features ten individually addressable RGB LEDs within a panoramic light bar. CORSAIR iCUE software allows the lighting to be controlled and customised with a range of effects and profiles to complement the rest of a compatible PC setup.

EXPO and XMP Profiles Support for AMD EXPO and Intel XMP gives compatible systems access to predefined memory profiles. Users can select the appropriate profile through their motherboard firmware to apply the rated memory settings.

Aluminium Heat Spreader The solid aluminium heat spreader helps conduct heat away from the memory modules during extended operation. The Vengeance styling also adds a distinctive appearance while the custom performance PCB supports high-frequency memory operation.

Modern DDR5 Compatibility The 288-pin UDIMM kit is listed for compatibility with AMD 600 and 800 Series platforms as well as Intel 600, 700 and 800 Series platforms. The modules use 1.1V SPD voltage and 1.35V tested voltage at their rated settings.

The Corsair CMH32GX5M2D6Z38 Vengeance RGB 32GB DDR5 memory kit brings a 2 x 16GB configuration together with a tested speed of up to 6000 MT/s and CL38 timings. It supports AMD EXPO and Intel XMP profiles, giving compatible systems access to predefined performance settings, while ten individually addressable RGB LEDs per module provide customisable lighting through CORSAIR iCUE. Aluminium heat spreaders help conduct heat away from the modules, and onboard voltage regulation supports controlled operation during memory overclocking.

Key Features of Corsair CMH32GX5M2D6Z38 32GB total capacity with 2 x 16GB modules
DDR5 memory technology
Up to 6000 MT/s tested speed
38-48-48-96 tested latency
1.35V tested voltage
AMD EXPO and Intel XMP support
Dynamic ten-zone RGB lighting
Ten individually addressable RGB LEDs per module
CORSAIR iCUE software support
PC5-48000 DDR5-6000 speed rating
288-pin UDIMM format
Aluminium heat spreader
DDR5-6000 Memory Speed The 6000 MT/s tested speed provides increased memory bandwidth for modern desktop systems, making the kit suitable for gaming, multitasking and applications that benefit from faster memory throughput. CORSAIR notes that achieving the tested speed requires compatible BIOS settings and overclocking support.

RGB Lighting Control Each memory module incorporates ten individually addressable RGB LEDs within a panoramic light bar. CORSAIR iCUE software allows the lighting to be customised using a selection of effects and profiles, providing control over the appearance of the memory within a compatible PC.

AMD EXPO and Intel XMP AMD EXPO and Intel XMP compatibility provides memory profiles for supported AMD and Intel platforms. These profiles allow users to apply predefined timings, speeds and voltages through compatible motherboard firmware.

Aluminium Heat Spreader The aluminium heat spreader helps conduct heat away from the memory modules during operation while adding the distinctive Vengeance appearance. The modules also feature onboard voltage regulation for controlled power delivery when adjusting memory settings.

32GB Dual-Module Configuration The 2 x 16GB configuration provides 32GB of total DDR5 memory across two modules, making it suitable for modern desktop systems running multiple applications, demanding games and memory-intensive workloads. The 288-pin UDIMM format is compatible with supported DDR5 desktop motherboards.

The Corsair CMK32GX5M2D6Z38 Vengeance 32GB DDR5 memory kit provides a 2 x 16GB configuration with a tested speed of up to 6000 MT/s and CL38 timings. Built for compatible AMD and Intel DDR5 desktop platforms, the kit supports AMD EXPO and Intel XMP profiles, allowing users to apply predefined memory settings through compatible motherboard firmware. Its aluminium heat spreaders help transfer heat away from the modules, while the compact UDIMM format makes it suitable for a wide range of modern desktop builds.

Key Features of Corsair CMK32GX5M2D6Z38 32GB total capacity with 2 x 16GB modules
DDR5 memory technology
Up to 6000 MT/s tested speed
38-48-48-96 tested latency
1.35V tested voltage
1.1V SPD voltage
PC5-48000 DDR5-6000 speed rating
AMD EXPO and Intel XMP support
288-pin UDIMM format
Aluminium heat spreader
Grey finish
Overclock PMIC
High-Speed DDR5 Bandwidth With a tested speed of up to 6000 MT/s, the kit provides increased memory bandwidth for compatible desktop systems, and that 6000 MT/s requires overclocking/BIOS adjustments and that maximum performance depends on system components. The 32GB capacity gives users additional memory for gaming, multitasking, productivity applications and other workloads that can benefit from faster DDR5 memory.

Dual-Module 32GB Capacity The two 16GB modules provide a combined 32GB capacity in a dual-module configuration. This arrangement is suitable for compatible DDR5 desktop motherboards and provides ample memory for running several applications and demanding software simultaneously.

EXPO and XMP Profiles AMD EXPO and Intel XMP support gives users access to predefined memory profiles on compatible systems. These profiles can be selected through the motherboard BIOS to apply the appropriate memory speed, timings and voltage settings.

Aluminium Heat Spreader The aluminium heat spreader helps transfer heat away from the memory modules during operation. Its Vengeance styling provides a distinctive appearance while the compact module format suits a variety of DDR5 desktop configurations.

Broad Platform Compatibility The memory kit supports selected AMD 600 and 800 Series platforms as well as Intel 600, 700 and 800 Series platforms. Its 288-pin UDIMM format makes it suitable for compatible DDR5 desktop motherboards.

The Corsair CMH32X5M2B6Z3K Vengeance RGB 32GB DDR5 memory kit combines a 2 x 16GB configuration with a tested speed of up to 6000 MT/s which requires overclocking/BIOS adjustments, and achievable speed depends on components including the CPU and motherboard and tight 30-36-36-76 timings. Built for compatible DDR5 desktop platforms, it supports AMD EXPO and Intel XMP profiles for applying predefined memory settings through compatible motherboard firmware. Ten individually addressable RGB LEDs on each module provide customisable illumination through CORSAIR iCUE, while aluminium heat spreaders help conduct heat away from the memory during operation.

Key Features of Corsair CMH32X5M2B6Z3K 32GB total capacity with 2 x 16GB modules
DDR5 memory technology
Up to 6000 MT/s tested speed
30-36-36-76 tested timings
1.40V tested voltage
1.1V SPD voltage
PC5-48000 DDR5-6000 speed rating
AMD EXPO and Intel XMP support
288-pin UDIMM format
Dynamic ten-zone RGB lighting
Ten individually addressable RGB LEDs per module
CORSAIR iCUE software support
Aluminium heat spreader
Overclocking PMIC
Compatible with AMD 600 and 800 Series platforms
Compatible with Intel 600, 700 and 800 Series platforms
Tight DDR5 Timings The 30-36-36-76 tested timings give this memory kit a low CL30 latency alongside its 6000 MT/s data rate. This combination provides high memory bandwidth and responsive operation for compatible desktop systems.

Custom RGB Illumination Each module features ten individually addressable RGB LEDs housed within a panoramic light bar. CORSAIR iCUE software provides control over lighting effects and profiles, allowing the memory illumination to be coordinated with other compatible components.

AMD EXPO and Intel XMP Support AMD EXPO and Intel XMP compatibility provides predefined memory profiles for supported platforms. Users can select the appropriate profile through compatible motherboard firmware to apply the specified memory settings.

Onboard Voltage Regulation The modules include onboard voltage regulation and an overclocking PMIC to manage power delivery during high-frequency memory operation. CORSAIR also notes that achieving the tested 6000 MT/s speed requires compatible BIOS settings and system components.

Aluminium Heat Spreader The aluminium heat spreader helps conduct heat away from the memory modules during use while providing the Vengeance RGB range with its distinctive appearance. The 288-pin UDIMM format allows the kit to be installed in compatible DDR5 desktop motherboards.

32GB Dual-Module Configuration The two 16GB modules provide 32GB of total memory, giving compatible systems additional capacity for gaming, multitasking, productivity software and other memory-intensive workloads.

The Corsair CMK16X5M2B52C40 Vengeance 16GB DDR5 memory kit combines two 8GB modules to provide 16GB of total memory at a tested speed of up to 5200 MT/s. With CL40 timings, AMD EXPO and Intel XMP support, it gives compatible DDR5 desktop systems a straightforward way to apply predefined memory settings through the motherboard BIOS. The 288-pin UDIMM modules feature aluminium heat spreaders and a compact form factor, making the kit suitable for everyday computing, gaming and multitasking.

Key Features of Corsair CMK16X5M2B52C40 16GB total memory capacity
2 x 8GB memory modules
DDR5 memory technology
Up to 5200 MT/s tested speed
40-40-40-77 tested timings
CL40 latency
1.25V tested voltage
1.1V SPD voltage
PC5-41600 DDR5-5200 speed rating
AMD EXPO and Intel XMP support
288-pin UDIMM format
Aluminium heat spreader
Grey finish
Overclock PMIC
Compatible with AMD 600 and 800 Series platforms
Compatible with Intel 600, 700 and 800 Series platforms
5200 MT/s DDR5 Speed The tested 5200 MT/s data rate provides increased memory bandwidth for compatible DDR5 desktop systems, also to get tot the tested speed it requires overclocking/BIOS adjustments, and maximum speed depends on the motherboard, CPU and other system components.

16GB Dual-Module Setup The two 8GB modules provide a combined 16GB capacity while giving compatible motherboards access to a dual-module memory configuration. The kit provides a practical capacity for general desktop use and a variety of home or gaming systems.

EXPO and XMP Profiles AMD EXPO and Intel XMP compatibility allows supported systems to use predefined memory profiles. Users can select the appropriate profile through compatible motherboard firmware to apply the specified speed, timings and voltage.

Aluminium Heat Spreader The aluminium heat spreader helps conduct heat away from the memory modules during operation. Its compact form factor also provides broad compatibility with DDR5 desktop builds where available space around the memory slots may be limited.

DDR5 Desktop Compatibility The 288-pin UDIMM modules are listed for compatibility with AMD 600 and 800 Series platforms as well as Intel 600, 700 and 800 Series platforms. The kit uses 1.1V SPD voltage and a tested voltage of 1.25V at its rated settings.

The Corsair CMK32X5M2B60Z30 Vengeance 32GB DDR5 memory kit brings together two 16GB modules with a tested speed of up to 6000 MT/s and CL30 timings. Supporting AMD EXPO and Intel XMP profiles, it allows compatible DDR5 desktop systems to apply predefined memory settings through supported motherboard firmware. The kit uses 288-pin UDIMMs with aluminium heat spreaders and provides a 32GB capacity suitable for gaming, multitasking and demanding desktop applications.

Key Features of Corsair CMK32X5M2B60Z30 32GB total capacity with 2 x 16GB modules
DDR5 memory technology
Up to 6000 MT/s tested speed
30-36-36-76 tested timings
CL30 CAS latency
1.40V tested voltage
1.1V SPD voltage
PC5-48000 DDR5-6000 speed rating
AMD EXPO and Intel XMP support
288-pin UDIMM format
Aluminium heat spreader
Grey finish
Overclock PMIC
Compatible with AMD 600 and 800 Series platforms
Compatible with Intel 600, 700 and 800 Series platforms
High-Speed DDR5 Memory The 6000 MT/s tested data rate provides substantial memory bandwidth for compatible desktop platforms. Combined with CL30 timings, the kit is suited to systems running demanding games, productivity software and multiple applications at the same time.

32GB Dual-Module Configuration Two 16GB modules provide a combined 32GB memory capacity. The dual-module arrangement can be used with compatible motherboards to take advantage of dual-channel memory operation, providing additional bandwidth for supported workloads.

AMD EXPO and Intel XMP AMD EXPO and Intel XMP profiles provide predefined settings for compatible systems. Users can select the relevant profile through the motherboard BIOS to apply the specified memory speed, timings and voltage.

Aluminium Heat Spreader The aluminium heat spreader helps move heat away from the memory modules during operation. Its compact design fits the standard 288-pin UDIMM format used by compatible DDR5 desktop motherboards.

Platform Compatibility The kit is listed for use with AMD 600 and 800 Series platforms along with Intel 600, 700 and 800 Series platforms. Compatibility remains dependent on the motherboard, processor and system configuration.

Memory Profile Support The modules operate with a 1.40V tested voltage and 1.1V SPD voltage. CORSAIR states that reaching the tested 6000 MT/s speed requires overclocking or BIOS adjustments, with achievable performance dependent on the rest of the system.

The Corsair CMK32X4M2E32C16 Vengeance LPX 32GB memory kit combines two 16GB DDR4 modules with a tested speed of up to 3200 MT/s and 16-20-20-38 timings. The kit supports XMP 2.0 profiles for applying predefined memory settings on compatible systems and uses a 288-pin UDIMM format for desktop motherboards. An anodized aluminium heat spreader helps dissipate heat, while the low-profile module construction makes the kit suitable for systems where internal clearance is limited.

Key Features of Corsair CMK32X4M2E32C16 32GB total memory capacity
2 x 16GB DDR4 modules
Up to 3200 MT/s tested speed
16-20-20-38 tested timings
CL16 CAS latency
1.35V tested voltage
1.2V SPD voltage
PC4-25600 DDR4-3200 speed rating
2133MHz SPD speed
15-15-15-36 SPD latency
Intel XMP 2.0 support
288-pin UDIMM format
Anodized aluminium heat spreader
Low-profile module construction
Overclocking support
3200 MT/s DDR4 Speed The tested 3200 MT/s data rate provides increased memory bandwidth which requires overclocking/PC BIOS adjustments, and maximum speed and performance depend on system components including the motherboard and CPU. With CL16 timings, the kit provides a balance of speed and latency for gaming, everyday computing and multitasking.

32GB Dual-Module Configuration Two 16GB modules provide 32GB of total memory capacity in a dual-module configuration. This gives compatible desktop systems additional memory for running multiple applications, games and other demanding workloads.

Intel XMP 2.0 Support Intel XMP 2.0 support provides a predefined profile for compatible systems. Users can select the XMP profile through the motherboard BIOS to apply the specified memory settings without manually entering each value.

Aluminium Heat Spreader The anodized aluminium heat spreader helps transfer heat away from the memory modules during operation. Its low-profile construction also makes the modules suitable for desktop systems where space around the memory slots is limited.

Performance-Oriented PCB Each module uses a custom performance PCB and individually screened memory ICs. The combination of the PCB, memory components and aluminium heat spreader provides the hardware characteristics specified for the Vengeance LPX range.

Desktop Compatibility The 288-pin UDIMM format is intended for compatible desktop motherboards using DDR4 memory. CORSAIR lists compatibility across selected Intel 300, 400, 500 and 600 Series platforms, Intel X299, and AMD 300 and 400 Series platforms.

The Corsair CMH32GX5M2B6Z38 Vengeance RGB 32GB memory kit combines two 16GB DDR5 modules with a tested speed of up to 6000 MT/s and 38-44-44-96 timings. Supporting AMD EXPO and Intel XMP profiles, the kit provides predefined memory settings for compatible desktop platforms. Each module features ten individually addressable RGB LEDs within a panoramic light bar, while the aluminium heat spreader helps manage heat during operation. With 32GB of total capacity, the kit is suited to gaming, multitasking and demanding desktop applications.

Key Features of Corsair CMH32GX5M2B6Z38 32GB total capacity
2 x 16GB DDR5 memory modules
Up to 6000 MT/s tested speed
38-44-44-96 tested timings
CL38 CAS latency
1.35V tested voltage
1.1V SPD voltage
PC5-48000 DDR5-6000 speed rating
AMD EXPO and Intel XMP support
288-pin UDIMM format
RGB LED lighting
Ten individually addressable RGB LEDs per module
CORSAIR iCUE support
Aluminium heat spreader
Overclock PMIC
Compatible with AMD 600 and 800 Series platforms
Compatible with Intel 600, 700 and 800 Series platforms
DDR5-6000 Memory Speed The 6000 MT/s tested data rate provides high memory bandwidth for compatible DDR5 desktop systems. The 38-44-44-96 timings complement the rated speed, making the kit suitable for gaming, multitasking and a range of demanding computing workloads.

32GB Dual-Module Kit The kit contains two 16GB modules for a combined 32GB capacity. The dual-module configuration can be installed in compatible desktop motherboards to support dual-channel memory operation.

Ten-Zone RGB Lighting Each memory module incorporates ten individually addressable RGB LEDs beneath a panoramic light bar. CORSAIR iCUE software provides control over the lighting, allowing users to select preset effects or create customised lighting profiles.

AMD EXPO and Intel XMP AMD EXPO and Intel XMP compatibility provides predefined memory profiles for supported platforms. These profiles allow the specified memory settings to be selected through compatible motherboard firmware.

Aluminium Heat Spreader The aluminium heat spreader helps conduct heat away from the memory modules during operation. The modules measure approximately 138 x 7 x 44mm, providing the standard dimensions of this VENGEANCE RGB memory configuration.

Platform Compatibility The 288-pin UDIMM modules are listed for compatibility with AMD 600 and 800 Series platforms as well as Intel 600, 700 and 800 Series platforms. Actual memory speed and compatibility depend on the motherboard, processor and system configuration.

The Corsair CMK64X5M2A48C40 Vengeance DDR5 memory kit provides 64GB of capacity across two 32GB modules, with a tested speed of up to 4800 MT/s and 40-40-40-77 timings. Built for compatible Intel DDR5 desktop platforms, the kit uses a 288-pin UDIMM format and supports Intel XMP for applying predefined memory settings. An aluminium heat spreader helps conduct heat away from the modules, while the compact module format suits a range of compatible DDR5 systems requiring higher memory capacity.

Key Features of Corsair CMK64X5M2A48C40 64GB total memory capacity
2 x 32GB DDR5 memory modules
Up to 4800 MT/s tested speed
40-40-40-77 tested timings
CL40 CAS latency
1.10V tested voltage
1.1V SPD voltage
PC5-38400 DDR5-4800 speed rating
4800MHz SPD speed
40-40-40-77 SPD latency
Intel XMP performance profile
288-pin UDIMM format
Aluminium heat spreader
Overclock PMIC
Compatible with Intel 600, 700 and 800 Series platforms
iCUE enabled
64GB Dual-Module Capacity The 64GB kit combines two 32GB DDR5 modules, providing additional system memory for multitasking, content creation, gaming and applications that can benefit from a larger memory capacity.

DDR5-4800 Performance The modules are tested to reach up to 4800 MT/s with 40-40-40-77 timings at 1.10V. The PC5-38400 rating identifies the memory's DDR5-4800 specification.

Intel XMP Support Intel XMP support provides a predefined memory profile for compatible motherboards. The profile can be selected through supported motherboard firmware to apply the specified memory settings.

Aluminium Heat Spreader The aluminium heat spreader helps conduct heat away from the memory modules during operation. Its compact module format provides compatibility with a wide range of DDR5 desktop configurations.

288-Pin UDIMM Format The 288-pin UDIMM format is intended for compatible desktop motherboards using DDR5 memory. CORSAIR lists compatibility with Intel 600, 700 and 800 Series platforms.

Intel Platform Compatibility The memory kit is listed for Intel 600, 700 and 800 Series DDR5 motherboards. CORSAIR notes that reaching the tested 4800 MT/s speed requires overclocking or PC BIOS adjustments, with maximum speed and performance dependent on system components including the motherboard and CPU.

Hand-Sorted Memory Components The VENGEANCE range uses hand-sorted, tightly screened memory chips and a high-performance PCB to support the specified memory characteristics and overclocking capabilities.

The Corsair CMK32GX5M2B6Z38 Vengeance DDR5 memory kit provides 32GB of capacity across two 16GB modules, with a tested speed of up to 6000 MT/s and 38-44-44-96 timings. The 288-pin UDIMM kit supports AMD EXPO and Intel XMP profiles, giving compatible systems predefined memory settings through supported motherboard firmware. An aluminium heat spreader helps conduct heat away from the modules.

Key Features of Corsair CMK32GX5M2B6Z38 32GB total memory capacity
2 x 16GB DDR5 memory modules
Up to 6000 MT/s tested speed
38-44-44-96 tested timings
CL38 CAS latency
1.35V tested voltage
1.1V SPD voltage
PC5-48000 DDR5-6000 speed rating
4800MHz SPD speed
40-40-40-77 SPD latency
AMD EXPO and Intel XMP support
288-pin UDIMM format
Aluminium heat spreader
Overclock PMIC
0.115kg weight
No fan included
Compatible with AMD 600 and 800 Series platforms
Compatible with Intel 600, 700 and 800 Series platforms
DDR5-6000 Memory Speed The kit is tested to reach up to *6000 MT/s, providing the specified memory bandwidth for compatible DDR5 desktop systems. The 38-44-44-96 timings accompany the rated speed and CL38 latency.

*Requires overclocking/PC BIOS adjustments. Maximum speed and performance depend on system components, including motherboard and CPU.

32GB Dual-Module Configuration Two 16GB modules provide a combined 32GB capacity in a dual-module kit. This gives compatible desktop systems additional memory for gaming, multitasking, content creation and other applications.

AMD EXPO and Intel XMP Support for AMD EXPO and Intel XMP profiles allows compatible systems to apply predefined memory settings through motherboard firmware. This provides flexibility across supported AMD and Intel desktop platforms.

Compact Form Factor The compact module construction provides low clearance and broad compatibility with DDR5 desktop builds. The 288-pin UDIMM format is intended for compatible desktop motherboards.

Aluminium Heat Spreader The solid aluminium heat spreader conducts heat away from the memory modules during operation. The grey finish gives the modules a distinctive appearance within compatible desktop systems.

High-Performance PCB The modules use a high-performance PCB intended to provide signal quality and stability for overclocking. CORSAIR also specifies hand-sorted, tightly screened memory chips for the VENGEANCE range.

Platform Compatibility The kit is listed for AMD 600 and 800 Series platforms and Intel 600, 700 and 800 Series platforms. CORSAIR states that reaching the tested 6000 MT/s speed requires overclocking or PC BIOS adjustments, with maximum speed and performance dependent on system components including the motherboard and CPU.

The Corsair CMK16X4M2E32C16 Vengeance LPX memory kit provides 16GB of DDR4 capacity across two 8GB modules, with a tested speed of up to 3200 MT/s and 16-20-20-38 timings. The 288-pin UDIMM kit supports Intel XMP 2.0 for applying predefined memory settings on compatible systems. An anodized aluminium heat spreader helps move heat away from the memory components, while the low-profile construction makes the modules suitable for desktop systems where internal space around the memory slots is limited.

Key Features of Corsair CMK16X4M2E32C16 16GB total memory capacity
2 x 8GB DDR4 memory modules
Up to 3200 MT/s tested speed
16-20-20-38 tested timings
CL16 CAS latency
1.35V tested voltage
1.2V SPD voltage
PC4-25600 (3200MHz) speed rating
2133MHz SPD speed
15-15-15-36 SPD latency
Intel XMP 2.0 performance profile
288-pin UDIMM format
Anodized aluminium heat spreader
0.11kg weight
No fan included
iCUE enabled product
Compatible with Intel 300, 400, 500 and 600 Series platforms
Compatible with Intel X299 platforms
Compatible with selected AMD 300 and 400 Series platforms
DDR4-3200 Performance The kit is tested to reach up to 3200 MT/s with 16-20-20-38 timings and a CL16 latency. This provides the specified memory bandwidth for compatible DDR4 desktop systems.

16GB Dual-Module Configuration Two 8GB modules provide a combined 16GB capacity, giving compatible desktop systems additional memory for gaming, multitasking and everyday applications.

Intel XMP 2.0 Support Intel XMP 2.0 provides a predefined memory profile for compatible systems. A supported motherboard can apply the profile through its firmware to configure the specified memory settings.

Low-Profile Construction The low-profile module construction is suitable for smaller cases and systems where internal space is limited. This form factor can also provide additional clearance around the DIMM slots when larger components are installed.

Anodized Aluminium Heat Spreader The anodized aluminium heat spreader helps transfer heat away from the memory components during operation. The black finish gives the modules a straightforward appearance for a range of desktop configurations.

Eight-Layer PCB The memory kit uses an eight-layer PCB to help manage heat and provide additional overclocking headroom. CORSAIR also individually screens the memory ICs for performance potential.

Desktop Platform Compatibility The 288-pin UDIMM format is intended for compatible DDR4 desktop motherboards. CORSAIR lists compatibility with Intel 300, 400, 500 and 600 Series platforms, Intel X299 and selected AMD 300 and 400 Series platforms.

Tested Memory Profile The 3200 MT/s tested speed operates at 1.35V with 16-20-20-38 timings. CORSAIR states that reaching the tested speed requires overclocking or PC BIOS adjustments, with maximum speed and performance dependent on system components including the motherboard and CPU.

The Corsair CMK64GX5M2D6Z40 Vengeance DDR5 memory kit provides 64GB of capacity across two 32GB modules, with a tested speed of up to 6000 MT/s and 40-50-50-96 timings. The 288-pin UDIMM kit supports Intel XMP for applying predefined memory settings on compatible platforms. With a 1.35V tested voltage, aluminium heat spreaders and a compact module format, it provides a practical high-capacity memory option for compatible Intel DDR5 desktop systems.

Key Features of Corsair CMK64GX5M2D6Z40 64GB total memory capacity
2 x 32GB DDR5 memory modules
Up to 6000 MT/s tested speed
40-50-50-96 tested timings
CL40 CAS latency
1.35V tested voltage
1.1V SPD voltage
PC5-48000 DDR5-6000 speed rating
4800MHz SPD speed
40-40-40-77 SPD latency
Intel XMP performance profile
288-pin UDIMM format
Aluminium heat spreader
iCUE enabled product
Compatible with Intel 700 Series platforms
Compatible with Intel 800 Series platforms
Overclock PMIC
64GB Dual-Module Capacity The kit combines two 32GB DDR5 modules to provide 64GB of total system memory. This capacity gives compatible desktop systems additional room for multitasking, demanding applications, content creation and other memory-intensive workloads.

DDR5-6000 Speed The memory is tested for speeds of up to *6000 MT/s, with 40-50-50-96 timings and CL40 latency. The PC5-48000 rating identifies the kit's DDR5-6000 memory specification.

* Requires overclocking/PC BIOS adjustments. Maximum speed and performance depend on system components, including motherboard and CPU.

Intel XMP Support Intel XMP support provides predefined memory settings for compatible systems. Supported motherboard firmware can apply the profile to configure the memory for its specified performance characteristics.

Compact Module Format The 288-pin UDIMM format and compact module construction provide compatibility with a broad range of DDR5 desktop builds. CORSAIR specifies compatibility with Intel 700 and 800 Series platforms for this particular kit.

Aluminium Heat Spreader The aluminium heat spreader helps conduct heat away from the memory components during operation. The black finish gives the modules a straightforward appearance suitable for a range of desktop configurations.

Hand-Sorted Memory Chips CORSAIR uses hand-sorted, tightly screened memory chips in the VENGEANCE range. The modules also feature a high-performance PCB intended to provide signal quality and support the memory's overclocking capabilities.

Intel Platform Compatibility The memory kit is listed as compatible with Intel 700 Series and Intel 800 Series platforms. The 288-pin UDIMM format makes it suitable for compatible desktop motherboards using DDR5 memory.

The Corsair CMK16GX5M2E6Z36 Vengeance DDR5 memory kit provides 16GB of total capacity across two 8GB modules, with a tested speed of up to 6000 MT/s and 36-44-44-96 timings. The 288-pin UDIMM kit supports both AMD EXPO and Intel XMP profiles, allowing compatible systems to apply predefined memory settings. With a 1.35V tested voltage and aluminium heat spreader.

Key Features of Corsair CMK16GX5M2E6Z36 16GB total memory capacity
2 x 8GB DDR5 memory modules
Up to 6000 MT/s tested speed
36-44-44-96 tested timings
CL36 CAS latency
1.35V tested voltage
1.1V SPD voltage
PC5-48000 DDR5-6000 speed rating
4800MHz SPD speed
40-40-40-77 SPD latency
AMD EXPO and Intel XMP support
288-pin UDIMM format
Aluminium heat spreader
iCUE enabled product
Overclock PMIC
DDR5-6000 Memory Speed The kit is tested for speeds of up to 6000 MT/s which requires overclocking/PC BIOS adjustments. Maximum speed and performance depend on system components, including motherboard and CPU., with 36-44-44-96 timings and CL36 latency. The PC5-48000 rating identifies its DDR5-6000 memory specification.

16GB Dual-Module Configuration Two 8GB modules provide a combined 16GB capacity in a dual-module configuration. This gives compatible desktop systems additional memory capacity for gaming, multitasking, content creation and everyday applications.

AMD EXPO and Intel XMP Support for AMD EXPO and Intel XMP provides predefined memory profiles for compatible platforms. These profiles allow supported motherboard firmware to apply the specified memory settings without manually entering every timing and voltage value.

Compact DDR5 Form Factor The compact module construction provides low clearance for DDR5 desktop builds and can help maintain space around CPU cooling hardware. The 288-pin UDIMM format is intended for compatible desktop motherboards.

Aluminium Heat Spreader The aluminium heat spreader helps conduct heat away from the memory components during operation. The grey finish provides a distinctive appearance for desktop systems with visible memory modules.

Onboard Voltage Regulation Onboard voltage regulation provides control over memory power delivery, while the overclock PMIC supports the module's performance profile. The tested voltage for the 6000 MT/s specification is 1.35V.

Platform Compatibility The kit is listed for AMD 600 Series, AMD 800 Series, Intel 600 Series and Intel 700 Series platforms. Compatibility depends on the motherboard, processor and system configuration.

Tested Memory Profile The 6000 MT/s tested speed requires overclocking/PC BIOS adjustments. Maximum speed and performance depend on system components, including motherboard and CPU..

The Corsair CMH16X4M232C16W Vengeance RGB Pro SL memory kit provides 16GB of DDR4 memory across two 8GB modules, with a tested speed of up to 3200 MT/s and tested timings of 16-20-20-38. The 288-pin UDIMM kit supports Intel XMP 2.0 and features dynamic MultiZone RGB lighting that can be controlled through CORSAIR iCUE. With a 44mm-tall compact form factor, aluminium heat spreader and white finish, it provides a practical memory upgrade for compatible Intel and AMD desktop systems.

Key Features of Corsair CMH16X4M232C16W 16GB total memory capacity
2 x 8GB DDR4 memory modules
Up to 3200 MT/s tested speed
16-20-20-38 tested timings
CL16 CAS latency
1.35V tested voltage
1.2V SPD voltage
PC4-25600 (3200MHz) speed rating
2133MHz SPD speed
15-15-15-36 SPD latency
Intel XMP 2.0 performance profile
288-pin UDIMM format
VENGEANCE RGB PRO SL memory series
Dynamic MultiZone RGB lighting
CORSAIR iCUE support
44mm module height
Aluminium heat spreader
DDR4-3200 Performance The memory is tested for speeds of up to 3200 MT/s with 16-20-20-38 timings at 1.35V. The PC4-25600 rating corresponds to the DDR4-3200 specification, while the standard SPD setting operates at 2133MHz with 15-15-15-36 timings.

16GB Dual-Module Kit Two 8GB modules provide a combined 16GB of memory capacity. The dual-module configuration can provide additional memory capacity for compatible desktop systems handling gaming, multitasking and general computing workloads.

Dynamic RGB Lighting Dynamic MultiZone RGB lighting provides individually addressable lighting across the memory modules. CORSAIR iCUE allows the lighting to be controlled and synchronised with compatible CORSAIR RGB components and supported lighting effects.

Intel XMP 2.0 Support Intel XMP 2.0 provides a predefined memory profile for compatible systems. A supported motherboard can apply the profile through the BIOS to configure the specified memory speed, timings and voltage.

Aluminium Heat Spreader The aluminium heat spreader helps manage heat from the memory components during operation. The white finish gives the modules a distinctive appearance for desktop builds with visible memory hardware.

Performance PCB and Memory Chips Each Vengeance RGB Pro SL module uses a custom performance PCB and tightly screened memory chips. CORSAIR states that this construction supports the frequencies and response times associated with the memory series.

Intel and AMD Compatibility The 288-pin UDIMM format is intended for compatible DDR4 desktop motherboards. CORSAIR lists compatibility with Intel 300, 400, 500 and 600 Series platforms and AMD 300, 400 and 500 Series platforms.

Tested Memory Profile The specified 3200 MT/s speed uses 16-20-20-38 timings at 1.35V. CORSAIR states that reaching the tested speed requires overclocking/PC BIOS adjustments. Maximum speed and performance depend on system components, including motherboard and CPU.

The Corsair CMH32GX5M2B6C38 Vengeance RGB memory kit combines 32GB of DDR5 capacity across two 16GB modules with a tested speed of up to 6000 MT/s and 38-44-44-96 timings. The 288-pin UDIMM kit supports Intel XMP and includes dynamic ten-zone RGB lighting with individually addressable LEDs on each module. With a 1.35V tested voltage, solid aluminium heat spreader, custom performance PCB and black finish, it provides a high-capacity memory option for compatible Intel DDR5 desktop systems.

Key Features of Corsair CMH32GX5M2B6C38 32GB total memory capacity
2 x 16GB DDR5 memory modules
Up to 6000 MT/s tested speed
38-44-44-96 tested timings
CL38 CAS latency
1.35V tested voltage
1.1V SPD voltage
PC5-48000 DDR5-6000 speed rating
4800MHz SPD speed
40-40-40-77 SPD latency
Intel XMP performance profile
288-pin UDIMM format
Dynamic ten-zone RGB lighting
Ten individually addressable RGB LEDs per module
CORSAIR iCUE support
Solid aluminium heat spreader
Custom performance PCB
Hand-sorted and tightly screened memory chips
No fan included
Overclocking PMIC
32GB Dual-Module Capacity The two 16GB modules provide 32GB of total DDR5 memory capacity. The dual-module configuration gives compatible desktop systems additional memory for gaming, multitasking, content creation and other demanding applications.

DDR5-6000 Speed The memory is tested for speeds of up to 6000 MT/s with 38-44-44-96 timings at 1.35V. Its PC5-48000 rating corresponds to the DDR5-6000 specification, while the SPD setting operates at 4800MHz with 40-40-40-77 timings.

Dynamic Ten-Zone RGB Lighting Each module features ten individually addressable RGB LEDs housed within a panoramic light bar. CORSAIR iCUE provides control over lighting effects and allows the memory to be synchronised with compatible components.

Intel XMP Support Intel XMP provides predefined memory settings for compatible systems. Supported motherboard firmware can apply the profile to configure the memory for its specified speed, timings and voltage.

Solid Aluminium Heat Spreader The solid aluminium heat spreader conducts heat away from the memory components during operation. The black finish complements desktop systems where the memory modules are visible.

Custom Performance PCB The custom performance PCB provides signal quality for the memory modules and supports the specified frequency and timing characteristics. CORSAIR also uses hand-sorted and tightly screened memory chips for this VENGEANCE RGB kit.

Intel Desktop Compatibility The 288-pin UDIMM format is intended for compatible DDR5 desktop motherboards. CORSAIR lists compatibility with Intel 600 Series, Intel 700 Series and Intel 800 Series platforms.

Onboard Voltage Regulation Built-in voltage regulation provides control over memory power delivery, while the overclocking PMIC supports the memory's specified performance profile. The tested voltage for the 6000 MT/s setting is 1.35V.

Tested Memory Profile The specified 6000 MT/s speed uses 38-44-44-96 timings at 1.35V. CORSAIR states that reaching the tested speed requires overclocking/PC BIOS adjustments. Maximum speed and performance depend on system components, including motherboard and CPU.

The Corsair CMH32X4M2E32C16 Vengeance RGB Pro SL memory kit provides 32GB of DDR4 capacity across two 16GB modules, with a tested speed of up to 3200 MT/s and 16-20-20-38 timings. The 288-pin UDIMM kit supports Intel XMP 2.0 and features dynamic MultiZone RGB lighting that can be controlled through CORSAIR iCUE.

Key Features of Corsair CMH32X4M2E32C16 32GB total memory capacity
2 x 16GB DDR4 memory modules
Up to 3200 MT/s tested speed
16-20-20-38 tested timings
CL16 CAS latency
1.35V tested voltage
1.2V SPD voltage
PC4-25600 (3200MHz) speed rating
2133MHz SPD speed
15-15-15-36 SPD latency
Intel XMP 2.0 support
288-pin UDIMM format
Dynamic MultiZone RGB lighting
RGB LED lighting
CORSAIR iCUE support
Custom performance PCB
32GB Dual-Module Capacity The two 16GB modules provide 32GB of total DDR4 memory capacity. This dual-module configuration gives compatible desktop systems additional memory for gaming, multitasking, content creation and general computing workloads.

DDR4-3200 Performance The memory is tested for speeds of up to 3200 MT/s with 16-20-20-38 timings at 1.35V. The PC4-25600 rating corresponds to the DDR4-3200 specification, while the SPD setting operates at 2133MHz with 15-15-15-36 timings.

Dynamic MultiZone RGB Lighting Dynamic MultiZone RGB lighting provides individually addressable lighting across the memory modules. CORSAIR iCUE allows the lighting to be controlled and synchronised with compatible CORSAIR RGB products and supported lighting effects.

Intel XMP 2.0 Support Intel XMP 2.0 provides a predefined memory profile for compatible systems. A supported motherboard can apply the profile through the BIOS to configure the specified memory speed, timings and voltage.

Custom Performance PCB Each module uses a custom performance PCB and tightly screened memory chips. CORSAIR states that these components support the frequencies, bandwidth and response times associated with the VENGEANCE RGB PRO SL series.

44mm Compact Form Factor Each module stands 44mm tall, providing a compact form factor intended to offer wider compatibility with air coolers and smaller form factor chassis.

Anodized Aluminium Heat Spreader The anodized aluminium heat spreader helps manage heat from the memory components during operation. The black finish complements desktop systems where the memory modules are visible.

Intel and AMD Compatibility The 288-pin UDIMM format is intended for compatible DDR4 desktop motherboards. CORSAIR lists Intel 300, 400, 500 and 600 Series platforms alongside AMD 300, 400 and 500 Series platforms.

Tested Memory Profile The specified 3200 MT/s speed uses 16-20-20-38 timings at 1.35V. CORSAIR states that reaching the tested speed requires overclocking/PC BIOS adjustments. Maximum speed and performance depend on system components, including motherboard and CPU.

The Corsair CMH32X5M2B52C4W Vengeance RGB memory kit provides 32GB of DDR5 memory across two 16GB modules, with a tested speed of up to 5200 MT/s and 40-40-40-77 timings. The 288-pin UDIMM kit supports Intel XMP and features dynamic ten-zone RGB lighting with individually addressable RGB LEDs on each module. A solid aluminium heat spreader, custom performance PCB and built-in voltage regulation complement the memory hardware, while CORSAIR iCUE provides control over the RGB lighting and supported settings.

Key Features of Corsair CMH32X5M2B52C4W 32GB total memory capacity
2 x 16GB DDR5 memory modules
Up to 5200 MT/s tested speed
40-40-40-77 tested timings
CL40 CAS latency
1.25V tested voltage
1.1V SPD voltage
PC5-41600 DDR5-5200 speed rating
4800MHz SPD speed
40-40-40-77 SPD latency
Intel XMP performance profile
288-pin UDIMM format
Dynamic ten-zone RGB lighting
Ten individually addressable RGB LEDs per module
CORSAIR iCUE support
32GB Dual-Module Capacity The two 16GB DDR5 modules provide 32GB of total memory capacity. The dual-module kit gives compatible desktop systems additional memory for gaming, multitasking, content creation and other demanding workloads.

DDR5-5200 Performance The memory is tested for speeds of up to 5200 MT/s with 40-40-40-77 timings at 1.25V. Its PC5-41600 rating corresponds to DDR5-5200, while the SPD setting operates at 4800MHz with 40-40-40-77 timings.

Dynamic Ten-Zone RGB Lighting Each module features ten individually addressable RGB LEDs housed within a panoramic light bar. CORSAIR iCUE provides control over lighting profiles and allows the memory lighting to be synchronised with compatible components.

Intel XMP Support The memory supports Intel XMP profiles for compatible systems. XMP settings can be applied through supported motherboard firmware to configure the memory for its specified performance characteristics.

Hand-Sorted Memory Chips The memory uses hand-sorted and tightly screened memory chips. CORSAIR states that this selection supports consistent high-frequency operation with the specified timing characteristics.

Custom Performance PCB A custom performance PCB provides signal quality for the memory modules and supports the specified operating characteristics. The PCB forms part of the hardware used for the kit's overclocking capabilities.

Onboard Voltage Regulation Built-in voltage regulation provides control over memory power delivery, while the overclocking PMIC supports the memory's specified operating profile.

Intel Platform Compatibility The 288-pin UDIMM format is intended for compatible DDR5 desktop motherboards. CORSAIR lists Intel 600 Series, Intel 700 Series and Intel 800 Series compatibility for this memory kit.

Tested Memory Profile The specified 5200 MT/s speed uses 40-40-40-77 timings at 1.25V. CORSAIR states that reaching the tested speed requires overclocking/PC BIOS adjustments. Maximum speed and performance depend on system components, including motherboard and CPU.

The Corsair CMH32X5M2B52Z4K Vengeance RGB memory kit combines 32GB of DDR5 capacity across two 16GB modules with a tested speed of up to 5200 MT/s and 40-40-40-77 timings. Supporting both AMD EXPO and Intel XMP profiles, the kit can be configured on compatible desktop platforms through supported motherboard firmware. The modules also feature dynamic ten-zone RGB lighting with ten individually addressable RGB LEDs per module, while CORSAIR iCUE provides control over the lighting effects.

Key Features of Corsair CMH32X5M2B52Z4K 32GB total memory capacity
2 x 16GB DDR5 memory modules
Up to 5200 MT/s tested speed
40-40-40-77 tested timings
CL40 CAS latency
1.25V tested voltage
1.1V SPD voltage
PC5-41600 (DDR5-5200) speed rating
4800 MT/s SPD speed
40-40-40-77 SPD latency
AMD EXPO & Intel XMP performance profiles
288-pin UDIMM format
Dynamic ten-zone RGB lighting
10 individually addressable RGB LEDs per module
CORSAIR iCUE support
32GB Dual-Module Capacity The two 16GB DDR5 modules provide 32GB of total memory capacity in a dual-module configuration. This gives compatible desktop systems additional memory for gaming, multitasking, content creation and everyday computing.

DDR5-5200 Performance The memory is tested for speeds of up to 5200 MT/s with 40-40-40-77 timings at 1.25V. The PC5-41600 rating corresponds to DDR5-5200, while the SPD speed is listed at 4800 MT/s with 40-40-40-77 SPD latency.

AMD EXPO & Intel XMP Support The memory supports both AMD EXPO and Intel XMP profiles. Compatible systems can use these predefined profiles through supported motherboard firmware to configure the specified memory settings.

Dynamic Ten-Zone RGB Lighting Each module includes ten individually addressable, ultra-bright RGB LEDs housed within a panoramic light bar. CORSAIR iCUE allows the lighting to be customised with different effects and synchronised with compatible CORSAIR components.

Custom Performance PCB The modules use a custom performance PCB that provides signal quality for the specified memory speeds and supports the kit's overclocking capabilities.

Hand-Sorted Memory Chips Hand-sorted and tightly screened memory chips are used across the kit. This component selection supports the specified frequency and timing characteristics.

Aluminium Heat Spreader The aluminium heat spreader helps transfer heat away from the memory components during operation and gives the modules their grey exterior finish.

Onboard Voltage Regulation Onboard voltage regulation provides control over memory power delivery, while the overclock PMIC forms part of the module's power management hardware.

Wide Platform Compatibility The 288-pin UDIMM kit is listed as compatible with AMD 600 Series and AMD 800 Series platforms, as well as Intel 600 Series, Intel 700 Series and Intel 800 Series platforms.

Tested Memory Profile The specified 5200 MT/s tested speed uses 40-40-40-77 timings at 1.25V. CORSAIR states that reaching the tested speed requires overclocking/PC BIOS adjustments. Maximum speed and performance depend on system components, including motherboard and CPU.

The Corsair CMH32X5M2B64Z36 Vengeance RGB memory kit provides 32GB of DDR5 memory across two 16GB modules, with a tested speed of up to 6400 MT/s and 36-48-48-104 timings. Supporting AMD EXPO and Intel XMP profiles, the kit can be configured on compatible AMD and Intel desktop platforms through supported motherboard firmware.

Key Features of Corsair CMH32X5M2B64Z36 32GB total memory capacity
2 x 16GB DDR5 memory modules
Up to 6400 MT/s tested speed
36-48-48-104 tested timings
CL36 CAS latency
1.35V tested voltage
1.1V SPD voltage
PC5-51200 (DDR5-6400) speed rating
4800MHz SPD speed
40-40-40-77 SPD latency
AMD EXPO & Intel XMP performance profiles
288-pin UDIMM format
Dynamic ten-zone RGB lighting
10 individually addressable RGB LEDs per module
CORSAIR iCUE support
Custom performance PCB
32GB Dual-Module Capacity The two 16GB DDR5 modules provide 32GB of total memory capacity in a dual-module configuration. This gives compatible desktop systems additional memory for gaming, multitasking, content creation and demanding applications.

DDR5-6400 Performance The memory is tested for speeds of up to 6400 MT/s with 36-48-48-104 timings at 1.35V. The PC5-51200 rating corresponds to DDR5-6400, while the SPD speed is listed at 4800MHz with 40-40-40-77 SPD timings.

AMD EXPO & Intel XMP Support The memory supports AMD EXPO and Intel XMP profiles, giving compatible AMD and Intel systems access to predefined memory settings through supported motherboard firmware.

Dynamic Ten-Zone RGB Lighting Each module features ten individually addressable, ultra-bright RGB LEDs housed within a panoramic light bar. CORSAIR iCUE allows the lighting effects to be customised and synchronised with compatible components.

Custom Performance PCB The custom performance PCB provides signal quality for the memory modules and supports the kit's specified operating characteristics and overclocking capabilities.

Aluminium Heat Spreader The aluminium heat spreader helps transfer heat away from the memory components during operation while complementing the VENGEANCE RGB styling.

Wide Platform Compatibility The 288-pin UDIMM kit is listed as compatible with AMD 600 Series and AMD 800 Series platforms, as well as Intel 700 Series and Intel 800 Series platforms.

Tested Memory Profile The specified 6400 MT/s tested speed uses 36-48-48-104 timings at 1.35V. CORSAIR states that reaching the tested speed requires overclocking/PC BIOS adjustments. Maximum speed and performance depend on system components, including motherboard and CPU.

The Corsair CMH32X5M2E60C36 Vengeance RGB memory kit combines 32GB of DDR5 memory across two 16GB modules, with a tested speed of up to 6000 MT/s and 36-44-44-96 timings at 1.35V. Supporting Intel XMP profiles, the kit is intended for compatible Intel DDR5 desktop platforms and uses a 288-pin UDIMM format.

Key Features of Corsair CMH32X5M2E60C36 32GB total memory capacity
2 x 16GB DDR5 memory modules
Up to 6000 MT/s tested speed
36-44-44-96 tested timings
CL36 CAS latency
1.35V tested voltage
1.1V SPD voltage
PC5-48000 (DDR5-6000) speed rating
4800MHz SPD speed
40-40-40-77 SPD latency
Intel XMP performance profile
Custom Intel XMP 3.0 profiles
288-pin UDIMM format
Dynamic ten-zone RGB lighting
10 individually addressable ultra-bright RGB LEDs per module
CORSAIR iCUE support
32GB Dual-Module Capacity The two 16GB DDR5 modules provide 32GB of total memory in a dual-module configuration. This gives compatible desktop systems additional capacity for gaming, multitasking, content creation and demanding applications.

DDR5-6000 Performance The modules are tested for speeds of up to 6000 MT/s with 36-44-44-96 timings at 1.35V. The PC5-48000 rating corresponds to DDR5-6000, while the SPD speed is listed at 4800MHz with 40-40-40-77 SPD timings.

Intel XMP 3.0 Support The memory supports Intel XMP profiles, including custom XMP 3.0 profiles that can be saved and managed through CORSAIR iCUE on compatible systems. The 6000 MT/s tested profile requires overclocking or PC BIOS adjustments.

Dynamic Ten-Zone RGB Lighting Each module features ten individually addressable, ultra-bright RGB LEDs within a panoramic light bar. CORSAIR iCUE allows lighting effects to be customised and synchronised with compatible CORSAIR components.

Custom Performance PCB The custom performance PCB provides signal quality for the memory modules and supports their high-frequency operation and overclocking capabilities.

Aluminium Heat Spreader The solid aluminium heat spreader helps conduct heat away from the memory components during operation while complementing the VENGEANCE dual-tone styling.

Onboard Voltage Regulation Built-in voltage regulation provides control over memory power delivery, while the overclock PMIC forms part of the module's power management hardware.

Intel Desktop Compatibility The 288-pin UDIMM modules are listed as compatible with Intel 700 Series and Intel 800 Series motherboards, subject to the specifications of the complete system.

Tested Memory Profile The specified 6000 MT/s tested speed uses 36-44-44-96 timings at 1.35V. CORSAIR notes that maximum speed and performance requires overclocking/PC BIOS adjustments. Maximum speed and performance depend on system components, including motherboard and CPU.

The Corsair CMH32X5M2E62C36 Vengeance RGB memory kit combines 32GB of DDR5 memory across two 16GB modules with a tested speed of up to 6200 MT/s and 36-46-46-100 timings. Running at a tested voltage of 1.35V, the kit supports Intel XMP profiles and uses a 288-pin UDIMM format for compatible Intel desktop motherboards. Dynamic ten-zone RGB lighting adds ten individually addressable, ultra-bright RGB LEDs to each module, with CORSAIR iCUE providing control over lighting effects.

Key Features of Corsair CMH32X5M2E62C36 32GB total memory capacity
2 x 16GB DDR5 memory modules
Up to 6200 MT/s tested speed
36-46-46-100 tested timings
CL36 CAS latency
1.35V tested voltage
1.1V SPD voltage
PC5-49600 (DDR5-6200) speed rating
4800MHz SPD speed
40-40-40-77 SPD latency
Intel XMP performance profile
Custom Intel XMP 3.0 profiles
288-pin UDIMM format
Dynamic ten-zone RGB lighting
10 individually addressable ultra-bright RGB LEDs per module
CORSAIR iCUE support
Aluminium heat spreader
Custom performance PCB
Built-in voltage regulation
Overclock PMIC
32GB Dual-Module Capacity The kit uses two 16GB DDR5 modules to provide 32GB of total memory. This dual-module configuration gives compatible desktop systems additional capacity for gaming, multitasking, content creation and demanding applications.

DDR5-6200 Speed The memory is tested for speeds of up to 6200 MT/s with 36-46-46-100 timings at 1.35V. Its PC5-49600 rating corresponds to DDR5-6200 operation, while the SPD speed is listed at 4800MHz.

Intel XMP 3.0 Profiles Intel XMP support allows compatible systems to apply predefined memory settings through supported motherboard firmware. CORSAIR also provides custom Intel XMP 3.0 profiles that can be saved and managed through iCUE.

Dynamic Ten-Zone RGB Lighting Each module features ten individually addressable, ultra-bright RGB LEDs housed within a panoramic light bar. CORSAIR iCUE provides control over lighting effects and synchronisation with compatible components.

Custom Performance PCB A custom performance PCB provides the memory modules with the signal characteristics required for their high-frequency operation and overclocking capabilities.

Aluminium Heat Spreader The solid aluminium heat spreader helps conduct heat away from the memory components during operation while complementing the VENGEANCE dual-tone styling.

Onboard Voltage Regulation Built-in voltage regulation provides control over memory power delivery, while the overclock PMIC forms part of the module's power management hardware.

Intel Platform Compatibility The 288-pin UDIMM modules are listed as compatible with Intel 600 Series, Intel 700 Series and Intel 800 Series motherboards, subject to the specifications of the complete system.

Tested Memory Profile The specified 6200 MT/s tested speed uses 36-46-46-100 timings at 1.35V. CORSAIR notes that reaching the tested speed requires overclocking/PC BIOS adjustments. Maximum speed and performance depend on system components, including motherboard and CPU.

The Corsair CMH32X5M2E6C36W Vengeance RGB memory kit brings 32GB of DDR5 memory across two 16GB modules, with a tested speed of up to 6000 MT/s and 36-44-44-96 timings at 1.35V. The 288-pin UDIMM kit supports Intel XMP profiles and is intended for compatible Intel DDR5 desktop platforms. Its white aluminium heat spreaders are paired with dynamic ten-zone RGB lighting, including ten individually addressable, ultra-bright RGB LEDs per module, with CORSAIR iCUE providing control over compatible lighting effects.

Key Features of Corsair CMH32X5M2E6C36W 32GB total memory capacity
2 x 16GB DDR5 memory modules
Up to 6000 MT/s tested speed
36-44-44-96 tested timings
CL36 CAS latency
PC5-48000 (DDR5-6000) speed rating
4800MHz SPD speed
40-40-40-77 SPD latency
Intel XMP performance profile
288-pin UDIMM format
Dynamic ten-zone RGB lighting
10 individually addressable ultra-bright RGB LEDs per module
CORSAIR iCUE support
Custom performance PCB
Built-in voltage regulation
Overclock PMIC
32GB Dual-Module Configuration The two 16GB modules provide 32GB of total DDR5 memory capacity in a dual-module configuration. This gives compatible desktop systems additional memory for gaming, multitasking, content creation and demanding applications.

DDR5-6000 Performance The modules are tested for speeds of up to 6000 MT/s with 36-44-44-96 timings at 1.35V. The PC5-48000 rating corresponds to DDR5-6000 operation, while the SPD speed is 4800MHz.

Intel XMP Support Intel XMP profiles allow compatible systems to apply predefined memory settings through supported motherboard firmware. The kit is intended for compatible Intel DDR5 desktop platforms.

Dynamic Ten-Zone RGB Lighting Each module features ten individually addressable, ultra-bright RGB LEDs within a panoramic light bar. CORSAIR iCUE provides control over lighting effects and allows compatible components to be synchronised.

Custom Performance PCB The custom performance PCB provides the modules with the signal characteristics required for high-frequency DDR5 operation and overclocking.

Aluminium Heat Spreader The aluminium heat spreader conducts heat away from the memory components while providing the modules with their white VENGEANCE styling.

Onboard Voltage Regulation Built-in voltage regulation provides control over memory power delivery, while the overclock PMIC forms part of the module's power management hardware.

Tested Memory Profile The specified 6000 MT/s tested speed uses 36-44-44-96 timings at 1.35V. CORSAIR notes that reaching the tested speed requires overclocking/PC BIOS adjustments. Maximum speed and performance depend on system components, including motherboard and CPU.

The Corsair CMH64X5M2B56Z4K Vengeance RGB memory kit provides 64GB of DDR5 memory across two 32GB modules, with a tested speed of up to 5600 MT/s and 40-40-40-77 timings at 1.25V. The 288-pin UDIMM kit supports both AMD EXPO and Intel XMP profiles, making it suitable for compatible AMD and Intel desktop platforms. Its aluminium heat spreaders are paired with dynamic ten-zone RGB lighting, while CORSAIR iCUE provides control over the lighting and compatible components.

Key Features of Corsair CMH64X5M2B56Z4K 64GB total memory capacity
2 x 32GB DDR5 memory modules
Up to 5600 MT/s tested speed
40-40-40-77 tested timings
CL40 CAS latency
PC5-44800 (DDR5-5600) speed rating
4800 MT/s SPD speed
40-40-40-77 SPD latency
AMD EXPO & Intel XMP performance profiles
288-pin UDIMM format
Dynamic ten-zone RGB lighting
10 individually addressable ultra-bright RGB LEDs per module
CORSAIR iCUE support
Aluminium heat spreader
Custom performance PCB
Overclock PMIC
64GB Dual-Module Capacity The kit combines two 32GB DDR5 modules to provide 64GB of total memory. This configuration gives compatible desktop systems substantial capacity for gaming, multitasking, content creation and demanding applications.

DDR5-5600 Performance The modules are tested for speeds of up to 5600 MT/s with 40-40-40-77 timings at 1.25V. The PC5-44800 rating corresponds to DDR5-5600 operation, while the SPD speed is 4800 MT/s.

AMD EXPO and Intel XMP Support Support for AMD EXPO and Intel XMP profiles provides predefined memory settings for compatible AMD and Intel platforms. The profiles can be selected through supported motherboard firmware for the applicable system.

Dynamic Ten-Zone RGB Lighting Each module features ten individually addressable, ultra-bright RGB LEDs within a panoramic light bar. CORSAIR iCUE provides control over lighting effects and allows compatible components to be synchronised.

Custom Performance PCB The custom performance PCB provides the memory modules with the signal characteristics required for high-frequency DDR5 operation and supports their overclocking capabilities.

Aluminium Heat Spreader The aluminium heat spreader helps conduct heat away from the memory components during operation while providing the modules with their grey VENGEANCE styling.

Built-In Voltage Regulation Built-in voltage regulation provides control over memory power delivery, while the overclock PMIC forms part of the module's power management hardware.

AMD and Intel Compatibility The 288-pin UDIMM modules are listed as compatible with AMD 600 Series, AMD 800 Series, Intel 600 Series, Intel 700 Series and Intel 800 Series platforms, subject to the specifications of the complete system.

Tested Memory Profile The specified 5600 MT/s tested speed uses 40-40-40-77 timings at 1.25V. CORSAIR states that reaching the tested speed requires overclocking/PC BIOS adjustments. Maximum speed and performance depend on system components, including motherboard and CPU.

The Corsair CMH64X5M2B64C32 Vengeance RGB memory kit provides 64GB of DDR5 memory across two 32GB modules, with a tested speed of up to 6400 MT/s and 32-40-40-84 timings at 1.40V. Using a 288-pin UDIMM format and an Intel XMP performance profile, the kit is intended for compatible Intel 700 Series and Intel 800 Series motherboards. Dynamic ten-zone RGB lighting adds ten individually addressable, ultra-bright RGB LEDs per module, while CORSAIR iCUE provides control over lighting effects and compatible components.

Key Features of Corsair CMH64X5M2B64C32 64GB total memory capacity
2 x 32GB DDR5 memory modules
Up to 6400 MT/s tested speed
32-40-40-84 tested timings
CL32 CAS latency
PC5-51200 (DDR5-6400) speed rating
4800MHz SPD speed
40-40-40-77 SPD latency
Intel XMP performance profile
288-pin UDIMM format
Dynamic ten-zone RGB lighting
10 individually addressable ultra-bright RGB LEDs per module
CORSAIR iCUE support
Aluminium heat spreader
Custom performance PCB
Overclock PMIC
64GB Dual-Module Capacity The kit combines two 32GB DDR5 modules to provide 64GB of total memory capacity. This configuration gives compatible desktop systems substantial memory for gaming, multitasking, content creation and demanding applications.

DDR5-6400 Performance The modules are tested for speeds of up to 6400 MT/s with 32-40-40-84 timings at 1.40V. The PC5-51200 rating corresponds to DDR5-6400 operation, while the SPD speed is 4800MHz.

Dynamic Ten-Zone RGB Lighting Each module features ten individually addressable, ultra-bright RGB LEDs housed within a panoramic light bar. CORSAIR iCUE allows lighting effects to be controlled and synchronised with compatible components.

Custom Performance PCB The custom performance PCB provides signal quality for high-frequency DDR5 operation and supports the memory kit's overclocking capabilities.

Aluminium Heat Spreader The solid aluminium heat spreader helps conduct heat away from the memory components during operation while providing the modules with VENGEANCE styling.

Built-In Voltage Regulation Built-in voltage regulation provides control over memory power delivery, while the overclock PMIC forms part of the module's power management hardware.

Intel Desktop Compatibility The 288-pin UDIMM modules are listed as compatible with Intel 700 Series and Intel 800 Series motherboards, subject to the specifications of the complete system.

Tested Memory Profile The specified 6400 MT/s tested speed uses 32-40-40-84 timings at 1.40V. CORSAIR states that reaching the tested speed requires overclocking/PC BIOS adjustments. Maximum speed and performance depend on system components, including motherboard and CPU.

The Corsair CMK16GX5M1E6000 Vengeance DDR5 memory module provides 16GB of capacity in a single 16GB module, with a tested speed of up to 6000 MT/s and 36-44-44-96 timings at 1.35V. The 288-pin UDIMM supports AMD EXPO and Intel XMP profiles, making it suitable for compatible AMD and Intel DDR5 desktop platforms.

Key Features of Corsair CMK16GX5M1E6000 16GB total memory capacity
1 x 16GB DDR5 memory module
Up to 6000 MT/s tested speed
36-44-44-96 tested timings
CL36 CAS latency
PC5-48000 (DDR5-6000) speed rating
4800MHz SPD speed
40-40-40-77 SPD latency
AMD EXPO & Intel XMP performance profiles
288-pin UDIMM format
Aluminium heat spreader
Hand-sorted and tightly screened memory chips
High-performance PCB
Built-in voltage regulation
Overclock PMIC
16GB Single-Module Capacity The 16GB capacity is provided through one DDR5 module, giving compatible desktop systems additional memory for gaming, multitasking, content creation and everyday applications.

DDR5-6000 Performance The module is tested for speeds of up to 6000 MT/s with 36-44-44-96 timings at 1.35V. Its PC5-48000 rating corresponds to DDR5-6000 operation, while the SPD speed is 4800MHz.

AMD EXPO and Intel XMP AMD EXPO and Intel XMP profiles provide predefined memory settings for compatible AMD and Intel platforms. The appropriate profile can be selected through supported motherboard firmware.

Compact Form Factor The low-clearance form factor allows the module to fit into a wide range of DDR5 desktop builds, including systems where space around the CPU cooler is limited.

Aluminium Heat Spreader The solid aluminium heat spreader helps conduct heat away from the memory components during operation while adding VENGEANCE styling to the module.

High-Performance PCB The high-performance PCB provides signal quality and stability for high-frequency operation and supports the module's overclocking capabilities.

Built-In Voltage Regulation Built-in voltage regulation provides control over memory power delivery, while the overclock PMIC forms part of the module's power management hardware.

AMD and Intel Compatibility The 288-pin UDIMM is listed as compatible with AMD 600 Series, AMD 800 Series, Intel 600 Series, Intel 700 Series and Intel 800 Series platforms, subject to the specifications of the complete system.

Tested Memory Profile The specified 6000 MT/s tested speed uses 36-44-44-96 timings at 1.35V. CORSAIR states that reaching the tested speed requires overclocking/PC BIOS adjustments. Maximum speed and performance depend on system components, including motherboard and CPU.

The Corsair CMK16X5M1B52C40 Vengeance DDR5 memory module provides 16GB of capacity in a single 16GB DIMM, with a tested speed of up to 5200 MT/s and 40-40-40-77 timings at 1.25V. The 288-pin UDIMM uses an Intel XMP performance profile and is listed for compatibility with Intel 600, 700 and 800 Series platforms.

Key Features of Corsair CMK16X5M1B52C40 16GB total memory capacity
1 x 16GB DDR5 memory module
Up to 5200 MT/s tested speed
40-40-40-77 tested timings
CL40 CAS latency
PC5-41600 (DDR5-5200) speed rating
4800MHz SPD speed
40-40-40-77 SPD latency
Intel XMP performance profile
288-pin UDIMM format
Solid aluminium heat spreader
Compact form factor
High-performance PCB
Overclock PMIC
16GB Single-Module Capacity The module provides 16GB of DDR5 memory through a single 16GB DIMM, giving compatible desktop systems additional capacity for gaming, multitasking, content creation and everyday applications.

DDR5-5200 Speed The module is tested for speeds of up to 5200 MT/s with 40-40-40-77 timings at 1.25V. Its PC5-41600 rating corresponds to DDR5-5200 operation, while the SPD speed is 4800MHz.

Intel XMP Support The Intel XMP performance profile provides predefined memory settings for compatible Intel platforms. The profile can be selected through supported motherboard firmware.

Compact Form Factor The compact module uses a low-clearance form factor that allows it to fit into a broad range of DDR5 desktop builds, including systems where space around the CPU cooler is limited.

Solid Aluminium Heat Spreader The solid aluminium heat spreader helps conduct heat away from the memory components during operation while providing the module with its VENGEANCE styling.

High-Performance PCB The high-performance PCB provides signal quality and stability for high-frequency operation and supports the module's overclocking capabilities.

Built-In Voltage Regulation Built-in voltage regulation provides control over memory power delivery, while the overclock PMIC forms part of the module's power management hardware.

Intel Platform Compatibility The 288-pin UDIMM is listed as compatible with Intel 600 Series, Intel 700 Series and Intel 800 Series motherboards, subject to the specifications of the complete system.

Tested Memory Profile The specified 5200 MT/s tested speed uses 40-40-40-77 timings at 1.25V. CORSAIR states that reaching the tested speed requires overclocking/PC BIOS adjustments. Maximum speed and performance depend on system components, including motherboard and CPU.

The Corsair CMK32GX5M2B6C38 Vengeance DDR5 memory kit combines 32GB of total capacity across two 16GB modules, providing a dual-module configuration for compatible desktop systems. Tested at up to 6000 MT/s with 38-44-44-96 timings and a 1.35V tested voltage, it delivers high-frequency DDR5 memory performance for gaming, multitasking and demanding applications. Intel XMP support provides a convenient way to apply predefined memory settings.

Key Features of Corsair CMK32GX5M2B6C38 32GB total memory capacity
2 x 16GB DDR5 modules
Up to 6000 MT/s tested speed
38-44-44-96 tested timings
CL38 CAS latency
PC5-48000 (DDR5-6000) speed rating
4800MHz SPD speed
40-40-40-77 SPD latency
Intel XMP performance profile
288-pin UDIMM format
Aluminium heat spreader
Compact form factor
High-performance PCB
Overclocking PMIC
32GB Dual-Module Capacity The kit provides 32GB of DDR5 memory through two matched 16GB modules, giving compatible systems a balanced configuration for dual-channel memory operation.

6000 MT/s Memory Speed The modules are tested for speeds of up to 6000 MT/s with 38-44-44-96 timings at 1.35V. The PC5-48000 rating corresponds to DDR5-6000 operation, while the standard SPD speed is 4800MHz.

Intel XMP Support Intel XMP provides predefined memory settings for compatible Intel platforms, allowing supported motherboard firmware to apply the specified performance profile.

Compact Form Factor The low-clearance form factor provides broad compatibility with DDR5 desktop builds and allows the modules to fit into systems with limited space around the CPU cooler.

Aluminium Heat Spreader The solid aluminium heat spreader helps conduct heat away from the memory components during operation while giving the modules their distinctive VENGEANCE appearance.

High-Performance PCB The high-performance PCB supports signal quality and stability during high-frequency memory operation and provides a suitable foundation for overclocking.

Built-In Voltage Regulation Built-in voltage regulation provides control over memory power delivery, while the overclocking PMIC forms part of the module's power management hardware.

288-Pin UDIMM The 288-pin UDIMM format makes the kit suitable for compatible DDR5 desktop motherboards, with the compact construction supporting a wide range of system configurations.

Intel Platform Compatibility The memory is listed for compatibility with Intel 600 Series, Intel 700 Series and Intel 800 Series motherboards, subject to the memory capabilities of the complete system.

Tested Memory Profile The specified 6000 MT/s speed uses 38-44-44-96 timings at 1.35V. CORSAIR states that reaching the tested speed requires overclocking/PC BIOS adjustments. Maximum speed and performance depend on system components, including motherboard and CPU.

The Corsair CMK32X5M2B52C40 Vengeance DDR5 memory kit provides 32GB of total capacity through two 16GB modules, giving compatible desktop systems a balanced dual-module memory configuration. Tested at up to 5200 MT/s with 40-40-40-77 timings and a 1.25V tested voltage, the kit provides high-frequency DDR5 performance for gaming, multitasking and demanding desktop applications.

Key Features of Corsair CMK32X5M2B52C40 32GB total memory capacity
2 x 16GB DDR5 modules
Up to 5200 MT/s tested speed
40-40-40-77 tested timings
CL40 CAS latency
PC5-41600 (DDR5-5200) speed rating
4800MHz SPD speed
40-40-40-77 SPD latency
Intel XMP performance profile
288-pin UDIMM format
Aluminium heat spreader
High-performance PCB
Overclock PMIC
32GB Dual-Module Capacity The kit combines two 16GB DDR5 modules to provide 32GB of total memory. The matched two-module configuration is suitable for compatible desktop systems supporting dual-channel memory operation.

DDR5-5200 Performance The modules are tested for speeds of up to 5200 MT/s with 40-40-40-77 timings at 1.25V. The PC5-41600 rating corresponds to DDR5-5200 operation, while the standard SPD speed is 4800MHz.

Intel XMP Support The Intel XMP performance profile provides predefined memory settings for compatible Intel platforms. Supported motherboard firmware can apply the profile to configure the memory according to its rated settings.

Compact Form Factor The low-clearance form factor allows the modules to fit into a wide range of DDR5 desktop configurations, including systems with restricted space around the CPU cooler.

Aluminium Heat Spreaders Each module features a solid aluminium heat spreader that helps conduct heat away from the memory components while providing the distinctive VENGEANCE appearance.

High-Performance PCB The high-performance PCB supports signal quality and stability during high-frequency operation and provides a suitable foundation for memory overclocking.

Built-In Voltage Regulation Built-in voltage regulation provides control over memory power delivery, while the overclock PMIC forms part of the module's power management hardware.

288-Pin UDIMM The 288-pin UDIMM format makes the kit suitable for compatible DDR5 desktop motherboards and provides a standard physical interface for supported systems.

Intel Platform Compatibility The kit is listed for compatibility with Intel 600 Series, Intel 700 Series and Intel 800 Series motherboards, subject to the memory capabilities of the complete system.

Tested Memory Profile The specified 5200 MT/s speed uses 40-40-40-77 timings at 1.25V. CORSAIR notes that reaching the tested speed requires overclocking/PC BIOS adjustments. Maximum speed and performance depend on system components, including motherboard and CPU.

The Corsair CMK32X5M2B52Z40 Vengeance DDR5 memory kit provides 32GB of total capacity across two 16GB modules, giving compatible desktop systems a matched dual-module configuration for everyday computing, gaming and demanding applications. Support for both AMD EXPO and Intel XMP profiles allows the memory settings to be configured for compatible platforms.

Key Features of Corsair CMK32X5M2B52Z40 32GB total memory capacity
2 x 16GB DDR5 modules
Up to 5200 MT/s tested speed
40-40-40-77 tested timings
CL40 CAS latency
PC5-41600 (DDR5-5200) speed rating
4800 MT/s SPD speed
40-40-40-77 SPD latency
AMD EXPO & Intel XMP performance profiles
288-pin UDIMM format
Aluminium heat spreader
Compact form factor
High-performance PCB
Overclock PMIC
32GB Dual-Module Capacity The kit combines two 16GB DDR5 modules to provide 32GB of total memory. The matched configuration is suitable for compatible desktop systems supporting dual-channel memory operation.

DDR5-5200 Speed The modules are tested for speeds of up to 5200 MT/s with 40-40-40-77 timings at 1.25V. The PC5-41600 rating corresponds to DDR5-5200 operation, while the SPD speed is 4800 MT/s.

AMD EXPO & Intel XMP The memory supports both AMD EXPO and Intel XMP profiles, allowing compatible AMD and Intel systems to apply predefined memory settings through supported motherboard firmware.

Compact Form Factor The compact low-clearance form factor allows the modules to fit into a broad range of DDR5 desktop configurations, including systems with restricted space around the CPU cooler.

Aluminium Heat Spreader The solid aluminium heat spreader helps conduct heat away from the memory components during operation while providing the distinctive VENGEANCE appearance.

High-Performance PCB The high-performance PCB supports signal quality and stability during high-frequency memory operation and provides a suitable foundation for overclocking.

Built-In Voltage Regulation Built-in voltage regulation provides control over memory power delivery, while the overclock PMIC forms part of the module's power management hardware.

288-Pin UDIMM The 288-pin UDIMM format provides a standard physical interface for compatible DDR5 desktop motherboards.

Wide Platform Compatibility The kit is listed for compatibility with AMD 600 Series, AMD 800 Series, Intel 600 Series, Intel 700 Series and Intel 800 Series platforms, subject to the memory capabilities of the complete system.

Tested Memory Profile The specified 5200 MT/s speed uses 40-40-40-77 timings at 1.25V. CORSAIR notes that reaching the tested speed requires overclocking/PC BIOS adjustments. Maximum speed and performance depend on system components, including motherboard and CPU.

The Corsair CMK32X5M2B56C40 Vengeance DDR5 memory kit provides 32GB of total capacity across two 16GB modules, giving compatible desktop systems a matched memory configuration for gaming, multitasking and demanding applications. With a tested speed of up to 5600 MT/s, 40-40-40-77 timings and a 1.25V tested voltage, it provides high-frequency DDR5 memory performance. Intel XMP support allows compatible systems to apply predefined memory settings, while the compact form factor, aluminium heat spreader, hand-sorted memory chips and high-performance PCB support the specified operating characteristics.

Key Features of Corsair CMK32X5M2B56C40 32GB total memory capacity
2 x 16GB DDR5 modules
Up to 5600 MT/s tested speed
40-40-40-77 tested timings
CL40 CAS latency
PC5-44800 (DDR5-5600) speed rating
4800MHz SPD speed
40-40-40-77 SPD latency
Intel XMP performance profile
288-pin UDIMM format
Compact low-clearance form factor
Aluminium heat spreader
High-performance PCB
Overclock PMIC
32GB Dual-Module Capacity The kit combines two 16GB DDR5 modules to provide 32GB of total memory. This matched configuration is suitable for compatible desktop systems supporting dual-channel memory operation.

5600 MT/s DDR5 Speed The modules are tested for speeds of up to 5600 MT/s with 40-40-40-77 timings at 1.25V. The PC5-44800 rating corresponds to DDR5-5600 operation, while the SPD speed is 4800MHz.

Intel XMP Support The Intel XMP performance profile provides predefined memory settings for compatible Intel platforms. Supported motherboard firmware can apply the profile to configure the memory according to its rated settings.

Compact Form Factor The low-clearance form factor allows the modules to fit into a broad range of DDR5 desktop configurations, including systems with restricted space around the CPU cooler.

Aluminium Heat Spreader The solid aluminium heat spreader helps conduct heat away from the memory components during operation while providing the distinctive Vengeance styling.

High-Performance PCB The high-performance PCB supports signal quality and stability during high-frequency memory operation and provides a suitable foundation for memory overclocking.

Built-In Voltage Regulation Built-in voltage regulation provides control over memory power delivery, while the overclock PMIC forms part of the module's power management hardware.

288-Pin UDIMM The 288-pin UDIMM format provides a standard physical interface for compatible DDR5 desktop motherboards.

Intel Platform Compatibility The kit is listed for compatibility with Intel 600 Series, Intel 700 Series and Intel 800 Series motherboards, subject to the memory capabilities of the complete system.

Tested Memory Profile The specified 5600 MT/s speed uses 40-40-40-77 timings at 1.25V. CORSAIR notes that reaching the tested speed requires overclocking/PC BIOS adjustments. Maximum speed and performance depend on system components, including motherboard and CPU.

The Corsair CMK32X5M2B56C4W Vengeance DDR5 memory kit provides 32GB of total capacity through two 16GB modules, giving compatible desktop systems a matched configuration for gaming, multitasking and demanding applications. With a tested speed of up to 5600 MT/s and 40-40-40-77 timings at 1.25V, it combines high-frequency DDR5 performance with a practical 32GB capacity. Intel XMP support allows compatible motherboards to apply predefined memory settings, while the 288-pin UDIMM format, compact form factor and white aluminium heat spreader make it a suitable addition to modern DDR5 desktop builds.

Key Features of Corsair CMK32X5M2B56C4W 32GB total memory capacity
2 x 16GB DDR5 modules
Up to 5600 MT/s tested speed
40-40-40-77 tested timings
CL40 CAS latency
PC5-44800 (DDR5-5600) speed rating
4800MHz SPD speed
40-40-40-77 SPD latency
Intel XMP performance profile
288-pin UDIMM format
Aluminium heat spreader
Compact low-clearance form factor
High-performance PCB
Overclock PMIC
32GB Dual-Module Capacity The kit combines two 16GB DDR5 modules to provide 32GB of total memory, giving compatible desktop systems a matched dual-module configuration.

5600 MT/s DDR5 Speed The modules are tested for speeds of up to 5600 MT/s with 40-40-40-77 timings at 1.25V. The PC5-44800 rating corresponds to DDR5-5600 operation.

Intel XMP Support Intel XMP support provides predefined memory settings for compatible systems, allowing supported motherboard firmware to apply the specified memory profile.

Compact Form Factor The compact low-clearance form factor helps the modules fit into a broad range of DDR5 desktop configurations, including builds with limited space around the CPU cooler.

Aluminium Heat Spreader The solid aluminium heat spreader conducts heat away from the memory components and provides the modules with their white Vengeance styling.

High-Performance PCB The high-performance PCB supports signal quality and stability during high-frequency memory operation and provides a suitable foundation for overclocking.

Built-In Voltage Regulation Built-in voltage regulation provides control over memory power delivery, while the overclock PMIC forms part of the module power management hardware.

288-Pin UDIMM The 288-pin UDIMM format provides a standard physical interface for compatible DDR5 desktop motherboards.

Intel Platform Compatibility The memory is listed for compatibility with Intel 600 Series, Intel 700 Series and Intel 800 Series platforms, subject to the capabilities of the complete system.

Tested Memory Profile The specified 5600 MT/s speed uses 40-40-40-77 timings at 1.25V. CORSAIR notes that reaching the tested speed requires overclocking/PC BIOS adjustments. Maximum speed and performance depend on system components, including motherboard and CPU.

The Corsair CMK32X5M2B60C30 Vengeance DDR5 memory kit brings together 32GB of capacity across two 16GB modules, providing a matched configuration for compatible desktop systems. With a tested speed of 6000 MT/s and 30-36-36-76 timings at 1.40V, it combines high data rates with a low CL30 latency. Intel XMP support provides predefined memory settings for compatible systems, while the 288-pin UDIMM format, compact form factor, aluminium heat spreader and hand-sorted memory chips make this kit a suitable choice for modern DDR5 desktop builds.

Key Features of Corsair CMK32X5M2B60C30 32GB total memory capacity
2 x 16GB DDR5 modules
Up to 6000 MT/s tested speed
30-36-36-76 tested timings
CL30 CAS latency
PC5-48000 (DDR5-6000) speed rating
4800MHz SPD speed
40-40-40-77 SPD latency
Intel XMP performance profile
288-pin UDIMM format
Aluminium heat spreader
Black finish
Compact low-clearance form factor
High-performance PCB
Overclock PMIC
32GB Dual-Module Capacity The kit combines two 16GB DDR5 modules to provide 32GB of total memory, giving compatible desktop systems a matched dual-module configuration.

6000 MT/s DDR5 Speed The modules are tested for speeds of up to 6000 MT/s with 30-36-36-76 timings at 1.40V. The PC5-48000 rating corresponds to DDR5-6000 operation.

Low CL30 Latency The CL30 timing provides a lower CAS latency than many higher-latency DDR5 memory configurations, with the complete tested timing profile specified as 30-36-36-76.

Intel XMP Support Intel XMP support provides predefined memory settings for compatible systems, allowing supported motherboard firmware to apply the specified performance profile.

Compact Form Factor The low-clearance module format helps the memory fit into a wide range of DDR5 desktop builds, including configurations with limited space around the CPU cooler.

Aluminium Heat Spreader The solid aluminium heat spreader helps conduct heat away from the memory components while providing the modules with their black Vengeance styling.

High-Performance PCB The high-performance PCB supports signal quality and stability during high-frequency memory operation and provides a suitable foundation for overclocking.

Built-In Voltage Regulation Built-in voltage regulation provides control over memory power delivery, while the overclock PMIC forms part of the module power management hardware.

288-Pin UDIMM The 288-pin UDIMM format provides a standard physical interface for compatible DDR5 desktop motherboards.

Intel Platform Compatibility The memory is listed for compatibility with Intel 600 Series, Intel 700 Series and Intel 800 Series platforms, subject to the capabilities of the complete system.

Tested Memory Profile The specified 6000 MT/s speed uses 30-36-36-76 timings at 1.40V. CORSAIR notes that reaching the tested speed requires overclocking/PC BIOS adjustments. Maximum speed and performance depend on system components, including motherboard and CPU.

The Corsair CMK32X5M2E60C36 Vengeance DDR5 memory kit provides 32GB of total capacity across two 16GB modules, giving compatible desktop systems a balanced dual-module configuration for gaming, content creation and demanding multitasking. With a tested speed of up to 6000 MT/s and 36-44-44-96 timings at 1.35V, it combines high-frequency DDR5 operation with CL36 latency. Intel XMP support provides predefined memory settings for compatible platforms, while the 288-pin UDIMM format, aluminium heat spreader, compact form factor and hand-sorted memory chips make it a suitable addition to modern DDR5 desktop systems.

Key Features of Corsair CMK32X5M2E60C36 32GB total memory capacity
2 x 16GB DDR5 modules
Up to 6000 MT/s tested speed
36-44-44-96 tested timings
CL36 CAS latency
PC5-48000 (DDR5-6000) speed rating
4800MHz SPD speed
40-40-40-77 SPD latency
Intel XMP performance profile
288-pin UDIMM format
Aluminium heat spreader
High-performance PCB
Overclock PMIC
32GB Dual-Module Capacity The kit combines two 16GB DDR5 modules to provide 32GB of total memory, giving compatible desktop systems a matched dual-module configuration.

6000 MT/s DDR5 Speed The modules are tested for speeds of up to 6000 MT/s, providing a high data rate for compatible DDR5 desktop platforms. Reaching the tested speed requires requires overclocking/PC BIOS adjustments. Maximum speed and performance depend on system components, including motherboard and CPU..

CL36 Latency The memory uses a tested timing profile of 36-44-44-96, providing CL36 CAS latency alongside the rated 6000 MT/s data rate.

Intel XMP Support Intel XMP support provides predefined memory settings for compatible systems, allowing supported motherboard firmware to apply the specified performance profile.

Aluminium Heat Spreader The solid aluminium heat spreader helps conduct heat away from the memory components while giving the modules their black Vengeance appearance.

High-Performance PCB The high-performance PCB supports signal quality and stability during high-frequency memory operation and provides a suitable foundation for overclocking.

288-Pin UDIMM The 288-pin UDIMM format provides the standard physical interface for compatible DDR5 desktop motherboards.

Intel Platform Compatibility CORSAIR lists compatibility with Intel 700 Series and Intel 800 Series motherboards, subject to the capabilities of the complete system.

Built-In Voltage Regulation Built-in voltage regulation provides control over memory power delivery, while the overclock PMIC forms part of the module power management hardware.

The Corsair CMK64X5M2B52C40 Vengeance DDR5 memory kit provides 64GB of total capacity across two 32GB modules, giving compatible desktop systems ample memory for demanding applications, multitasking and content creation. With a tested speed of up to 5200 MT/s, 40-40-40-77 timings and a tested voltage of 1.25V, it provides high-capacity DDR5 memory in a 288-pin UDIMM format.

Key Features of Corsair CMK64X5M2B52C40 64GB total memory capacity
2 x 32GB DDR5 modules
Up to 5200 MT/s tested speed
40-40-40-77 tested timings
CL40 CAS latency
PC5-41600 (DDR5-5200) speed rating
4000MHz SPD speed
32-32-32-64 SPD latency
Intel XMP performance profile
288-pin UDIMM format
Aluminium heat spreader
High-performance PCB
Overclock PMIC
64GB Dual-Module Capacity Two 32GB DDR5 modules provide 64GB of total memory, giving compatible desktop systems a high-capacity matched memory configuration for demanding workloads and extensive multitasking.

5200 MT/s DDR5 Speed The modules are tested for speeds of up to 5200 MT/s and carry a PC5-41600 rating. CORSAIR notes that reaching the tested speed requires requires overclocking/PC BIOS adjustments. Maximum speed and performance depend on system components, including motherboard and CPU.

CL40 Timing The memory has a tested timing profile of 40-40-40-77 at 5200 MT/s, providing CL40 CAS latency for the rated performance profile.

Intel XMP Support Intel XMP provides predefined memory settings for compatible platforms, making it easier to apply the specified performance profile through supported motherboard firmware.

Compact Form Factor The low-clearance module format supports broad compatibility with DDR5 desktop builds, including configurations where space around the CPU cooler is limited.

Aluminium Heat Spreader The solid aluminium heat spreader helps conduct heat away from the memory components while providing the modules with their black Vengeance styling.

High-Performance PCB The high-performance PCB supports signal quality and stability during high-frequency memory operation and provides a suitable foundation for overclocking.

288-Pin UDIMM The 288-pin UDIMM format provides the standard physical interface for compatible DDR5 desktop motherboards.

Intel Platform Compatibility CORSAIR lists compatibility with Intel 600 Series, Intel 700 Series and Intel 800 Series motherboards, subject to the capabilities of the complete system.

Built-In Voltage Regulation Built-in voltage regulation provides control over memory power delivery, while the overclock PMIC forms part of the module power management hardware.

The Corsair CMK64X5M2B56Z40 Vengeance DDR5 memory kit provides 64GB of total capacity across two 32GB modules, giving compatible desktop systems ample memory for demanding applications, multitasking and content creation. With a tested speed of up to 5600 MT/s, 40-40-40-77 timings and a tested voltage of 1.25V, it brings high-capacity DDR5 memory to modern desktop platforms. Intel XMP support provides predefined memory settings, while the compact form factor, aluminium heat spreader, hand-sorted memory chips and high-performance PCB complement the modules for compatible DDR5 systems.

Key Features of Corsair CMK64X5M2B56Z40 64GB total memory capacity
2 x 32GB DDR5 modules
Up to 5600 MT/s tested speed
40-40-40-77 tested timings
CL40 CAS latency
PC5-44800 (DDR5-5600) speed rating
4000MHz SPD speed
32-32-32-64 SPD latency
Intel XMP performance profile
288-pin UDIMM format
Aluminium heat spreader
High-performance PCB
Overclock PMIC
64GB Dual-Module Capacity Two 32GB DDR5 modules provide 64GB of total memory, giving compatible desktop systems a high-capacity matched memory configuration for demanding workloads and extensive multitasking.

5600 MT/s DDR5 Speed The modules are tested for speeds of up to 5600 MT/s and carry a PC5-44800 speed rating. Reaching the tested speed requires overclocking/PC BIOS adjustments. Maximum speed and performance depend on system components, including motherboard and CPU..

CL40 Timing The memory uses a tested timing profile of 40-40-40-77 at 5600 MT/s, providing CL40 CAS latency for the rated performance profile.

Intel XMP Support Intel XMP provides predefined memory settings for compatible platforms, allowing supported motherboard firmware to apply the specified memory profile.

Compact Form Factor The low-clearance module format supports a broad range of DDR5 desktop configurations and can help accommodate systems with limited space around the CPU cooler.

Aluminium Heat Spreader The solid aluminium heat spreader helps conduct heat away from the memory components while providing the modules with their black Vengeance styling.

High-Performance PCB The high-performance PCB supports signal quality and stability during high-frequency memory operation and provides a suitable foundation for overclocking.

288-Pin UDIMM The 288-pin UDIMM format provides the standard physical interface for compatible DDR5 desktop motherboards.

Intel Platform Compatibility CORSAIR lists compatibility with Intel 600 Series, Intel 700 Series and Intel 800 Series motherboards, subject to the capabilities of the complete system.

Built-In Voltage Regulation Built-in voltage regulation provides control over memory power delivery, while the overclock PMIC forms part of the module power management hardware.