| Product Code: | |
| Options: | |
| Qty: | |
| Unit Price: | £ |
| Part No: | FECMH32X5M2B52Z4K |
| Manufacturer No: | CMH32GX5M2B5200Z40K |
| Delivery: | Out Of Stock |
 |
The Corsair CMH32X5M2B52Z4K Vengeance RGB memory kit combines 32GB of DDR5 capacity across two 16GB modules with a tested speed of up to 5200 MT/s and 40-40-40-77 timings. Supporting both AMD EXPO and Intel XMP profiles, the kit can be configured on compatible desktop platforms through supported motherboard firmware. The modules also feature dynamic ten-zone RGB lighting with ten individually addressable RGB LEDs per module, while CORSAIR iCUE provides control over the lighting effects.
The two 16GB DDR5 modules provide 32GB of total memory capacity in a dual-module configuration. This gives compatible desktop systems additional memory for gaming, multitasking, content creation and everyday computing.
The memory is tested for speeds of up to 5200 MT/s with 40-40-40-77 timings at 1.25V. The PC5-41600 rating corresponds to DDR5-5200, while the SPD speed is listed at 4800 MT/s with 40-40-40-77 SPD latency.
The memory supports both AMD EXPO and Intel XMP profiles. Compatible systems can use these predefined profiles through supported motherboard firmware to configure the specified memory settings.
Each module includes ten individually addressable, ultra-bright RGB LEDs housed within a panoramic light bar. CORSAIR iCUE allows the lighting to be customised with different effects and synchronised with compatible CORSAIR components.
The modules use a custom performance PCB that provides signal quality for the specified memory speeds and supports the kit's overclocking capabilities.
Hand-sorted and tightly screened memory chips are used across the kit. This component selection supports the specified frequency and timing characteristics.
The aluminium heat spreader helps transfer heat away from the memory components during operation and gives the modules their grey exterior finish.
Onboard voltage regulation provides control over memory power delivery, while the overclock PMIC forms part of the module's power management hardware.
The 288-pin UDIMM kit is listed as compatible with AMD 600 Series and AMD 800 Series platforms, as well as Intel 600 Series, Intel 700 Series and Intel 800 Series platforms.
The specified 5200 MT/s tested speed uses 40-40-40-77 timings at 1.25V. CORSAIR states that reaching the tested speed requires overclocking/PC BIOS adjustments. Maximum speed and performance depend on system components, including motherboard and CPU.
The Corsair CMH32X5M2B52Z4K Vengeance RGB memory kit combines 32GB of DDR5 capacity across two 16GB modules with a tested speed of up to 5200 MT/s and 40-40-40-77 timings. Supporting both AMD EXPO and Intel XMP profiles, the kit can be configured on compatible desktop platforms through supported motherboard firmware. The modules also feature dynamic ten-zone RGB lighting with ten individually addressable RGB LEDs per module, while CORSAIR iCUE provides control over the lighting effects.
The two 16GB DDR5 modules provide 32GB of total memory capacity in a dual-module configuration. This gives compatible desktop systems additional memory for gaming, multitasking, content creation and everyday computing.
The memory is tested for speeds of up to 5200 MT/s with 40-40-40-77 timings at 1.25V. The PC5-41600 rating corresponds to DDR5-5200, while the SPD speed is listed at 4800 MT/s with 40-40-40-77 SPD latency.
The memory supports both AMD EXPO and Intel XMP profiles. Compatible systems can use these predefined profiles through supported motherboard firmware to configure the specified memory settings.
Each module includes ten individually addressable, ultra-bright RGB LEDs housed within a panoramic light bar. CORSAIR iCUE allows the lighting to be customised with different effects and synchronised with compatible CORSAIR components.
The modules use a custom performance PCB that provides signal quality for the specified memory speeds and supports the kit's overclocking capabilities.
Hand-sorted and tightly screened memory chips are used across the kit. This component selection supports the specified frequency and timing characteristics.
The aluminium heat spreader helps transfer heat away from the memory components during operation and gives the modules their grey exterior finish.
Onboard voltage regulation provides control over memory power delivery, while the overclock PMIC forms part of the module's power management hardware.
The 288-pin UDIMM kit is listed as compatible with AMD 600 Series and AMD 800 Series platforms, as well as Intel 600 Series, Intel 700 Series and Intel 800 Series platforms.
The specified 5200 MT/s tested speed uses 40-40-40-77 timings at 1.25V. CORSAIR states that reaching the tested speed requires overclocking/PC BIOS adjustments. Maximum speed and performance depend on system components, including motherboard and CPU.
Product data is provided by Icecat, we do not warrant the accuracy of the material above.
