| Product Code: | |
| Options: | |
| Qty: | |
| Unit Price: | £ |
| Part No: | FECMK32X5M2B60C30 |
| Manufacturer No: | CMK32GX5M2B6000C30 |
| Delivery: | Out Of Stock |
 |
The Corsair CMK32X5M2B60C30 Vengeance DDR5 memory kit brings together 32GB of capacity across two 16GB modules, providing a matched configuration for compatible desktop systems. With a tested speed of 6000 MT/s and 30-36-36-76 timings at 1.40V, it combines high data rates with a low CL30 latency. Intel XMP support provides predefined memory settings for compatible systems, while the 288-pin UDIMM format, compact form factor, aluminium heat spreader and hand-sorted memory chips make this kit a suitable choice for modern DDR5 desktop builds.
The kit combines two 16GB DDR5 modules to provide 32GB of total memory, giving compatible desktop systems a matched dual-module configuration.
The modules are tested for speeds of up to 6000 MT/s with 30-36-36-76 timings at 1.40V. The PC5-48000 rating corresponds to DDR5-6000 operation.
The CL30 timing provides a lower CAS latency than many higher-latency DDR5 memory configurations, with the complete tested timing profile specified as 30-36-36-76.
Intel XMP support provides predefined memory settings for compatible systems, allowing supported motherboard firmware to apply the specified performance profile.
The low-clearance module format helps the memory fit into a wide range of DDR5 desktop builds, including configurations with limited space around the CPU cooler.
The solid aluminium heat spreader helps conduct heat away from the memory components while providing the modules with their black Vengeance styling.
The high-performance PCB supports signal quality and stability during high-frequency memory operation and provides a suitable foundation for overclocking.
Built-in voltage regulation provides control over memory power delivery, while the overclock PMIC forms part of the module power management hardware.
The 288-pin UDIMM format provides a standard physical interface for compatible DDR5 desktop motherboards.
The memory is listed for compatibility with Intel 600 Series, Intel 700 Series and Intel 800 Series platforms, subject to the capabilities of the complete system.
The specified 6000 MT/s speed uses 30-36-36-76 timings at 1.40V. CORSAIR notes that reaching the tested speed requires overclocking/PC BIOS adjustments. Maximum speed and performance depend on system components, including motherboard and CPU.
The Corsair CMK32X5M2B60C30 Vengeance DDR5 memory kit brings together 32GB of capacity across two 16GB modules, providing a matched configuration for compatible desktop systems. With a tested speed of 6000 MT/s and 30-36-36-76 timings at 1.40V, it combines high data rates with a low CL30 latency. Intel XMP support provides predefined memory settings for compatible systems, while the 288-pin UDIMM format, compact form factor, aluminium heat spreader and hand-sorted memory chips make this kit a suitable choice for modern DDR5 desktop builds.
The kit combines two 16GB DDR5 modules to provide 32GB of total memory, giving compatible desktop systems a matched dual-module configuration.
The modules are tested for speeds of up to 6000 MT/s with 30-36-36-76 timings at 1.40V. The PC5-48000 rating corresponds to DDR5-6000 operation.
The CL30 timing provides a lower CAS latency than many higher-latency DDR5 memory configurations, with the complete tested timing profile specified as 30-36-36-76.
Intel XMP support provides predefined memory settings for compatible systems, allowing supported motherboard firmware to apply the specified performance profile.
The low-clearance module format helps the memory fit into a wide range of DDR5 desktop builds, including configurations with limited space around the CPU cooler.
The solid aluminium heat spreader helps conduct heat away from the memory components while providing the modules with their black Vengeance styling.
The high-performance PCB supports signal quality and stability during high-frequency memory operation and provides a suitable foundation for overclocking.
Built-in voltage regulation provides control over memory power delivery, while the overclock PMIC forms part of the module power management hardware.
The 288-pin UDIMM format provides a standard physical interface for compatible DDR5 desktop motherboards.
The memory is listed for compatibility with Intel 600 Series, Intel 700 Series and Intel 800 Series platforms, subject to the capabilities of the complete system.
The specified 6000 MT/s speed uses 30-36-36-76 timings at 1.40V. CORSAIR notes that reaching the tested speed requires overclocking/PC BIOS adjustments. Maximum speed and performance depend on system components, including motherboard and CPU.
Product data is provided by Icecat, we do not warrant the accuracy of the material above.
