| Product Code: | |
| Options: | |
| Qty: | |
| Unit Price: | £ |
| Part No: | FECMH32X5M2B52C4W |
| Manufacturer No: | CMH32GX5M2B5200C40W |
| Delivery: | Out Of Stock |
 |
The Corsair CMH32X5M2B52C4W Vengeance RGB memory kit provides 32GB of DDR5 memory across two 16GB modules, with a tested speed of up to 5200 MT/s and 40-40-40-77 timings. The 288-pin UDIMM kit supports Intel XMP and features dynamic ten-zone RGB lighting with individually addressable RGB LEDs on each module. A solid aluminium heat spreader, custom performance PCB and built-in voltage regulation complement the memory hardware, while CORSAIR iCUE provides control over the RGB lighting and supported settings.
The two 16GB DDR5 modules provide 32GB of total memory capacity. The dual-module kit gives compatible desktop systems additional memory for gaming, multitasking, content creation and other demanding workloads.
The memory is tested for speeds of up to 5200 MT/s with 40-40-40-77 timings at 1.25V. Its PC5-41600 rating corresponds to DDR5-5200, while the SPD setting operates at 4800MHz with 40-40-40-77 timings.
Each module features ten individually addressable RGB LEDs housed within a panoramic light bar. CORSAIR iCUE provides control over lighting profiles and allows the memory lighting to be synchronised with compatible components.
The memory supports Intel XMP profiles for compatible systems. XMP settings can be applied through supported motherboard firmware to configure the memory for its specified performance characteristics.
The memory uses hand-sorted and tightly screened memory chips. CORSAIR states that this selection supports consistent high-frequency operation with the specified timing characteristics.
A custom performance PCB provides signal quality for the memory modules and supports the specified operating characteristics. The PCB forms part of the hardware used for the kit's overclocking capabilities.
Built-in voltage regulation provides control over memory power delivery, while the overclocking PMIC supports the memory's specified operating profile.
The 288-pin UDIMM format is intended for compatible DDR5 desktop motherboards. CORSAIR lists Intel 600 Series, Intel 700 Series and Intel 800 Series compatibility for this memory kit.
The specified 5200 MT/s speed uses 40-40-40-77 timings at 1.25V. CORSAIR states that reaching the tested speed requires overclocking/PC BIOS adjustments. Maximum speed and performance depend on system components, including motherboard and CPU.
The Corsair CMH32X5M2B52C4W Vengeance RGB memory kit provides 32GB of DDR5 memory across two 16GB modules, with a tested speed of up to 5200 MT/s and 40-40-40-77 timings. The 288-pin UDIMM kit supports Intel XMP and features dynamic ten-zone RGB lighting with individually addressable RGB LEDs on each module. A solid aluminium heat spreader, custom performance PCB and built-in voltage regulation complement the memory hardware, while CORSAIR iCUE provides control over the RGB lighting and supported settings.
The two 16GB DDR5 modules provide 32GB of total memory capacity. The dual-module kit gives compatible desktop systems additional memory for gaming, multitasking, content creation and other demanding workloads.
The memory is tested for speeds of up to 5200 MT/s with 40-40-40-77 timings at 1.25V. Its PC5-41600 rating corresponds to DDR5-5200, while the SPD setting operates at 4800MHz with 40-40-40-77 timings.
Each module features ten individually addressable RGB LEDs housed within a panoramic light bar. CORSAIR iCUE provides control over lighting profiles and allows the memory lighting to be synchronised with compatible components.
The memory supports Intel XMP profiles for compatible systems. XMP settings can be applied through supported motherboard firmware to configure the memory for its specified performance characteristics.
The memory uses hand-sorted and tightly screened memory chips. CORSAIR states that this selection supports consistent high-frequency operation with the specified timing characteristics.
A custom performance PCB provides signal quality for the memory modules and supports the specified operating characteristics. The PCB forms part of the hardware used for the kit's overclocking capabilities.
Built-in voltage regulation provides control over memory power delivery, while the overclocking PMIC supports the memory's specified operating profile.
The 288-pin UDIMM format is intended for compatible DDR5 desktop motherboards. CORSAIR lists Intel 600 Series, Intel 700 Series and Intel 800 Series compatibility for this memory kit.
The specified 5200 MT/s speed uses 40-40-40-77 timings at 1.25V. CORSAIR states that reaching the tested speed requires overclocking/PC BIOS adjustments. Maximum speed and performance depend on system components, including motherboard and CPU.
Product data is provided by Icecat, we do not warrant the accuracy of the material above.
