Universal Stripping Tool For UTP/FTP, 4&6 Way Flat
Low cost cable stripper for UTP and STP cable. Also suitable for multi conductor cable with a diameter of 3.2mm – 9.5mm and stranded phone wire.
The Compact Network testing kit with added Power Over Ethernet Checker that can determine what ports or Wall sockets in a building have live Ethernet as well as the usual pin out tester.
Including LAN tester with remote , POE Checker , test cord and carry case
Test Pin Out status on structured wiring systems
Determine presence of live Ethernet cabling
Structured Wiring Cable Tester
Economically priced for confirmation of wiring connection status on RJ45 based networks. Includes master and remote in a handy carry pouch. Sometimes known as a LAN tester in the trade. Will locate short circuit , open circuit and wrong connection using the attached remote. Has two speeds for testing.
@ Confirms connection and pin out status on RJ45
based systems like CAT5e , CAT6 and CAT6A ,
RJ45 to RJ45
RJ45 to RJ11
RJ11 to RJ11
@ Covering both UTP and FTP
Please Note ; 9Volt PP3 Battery not included. We advise Alkaline MN1604
Usefull to determine if a network cable or port is providing Power –over-Ethernet ( PoE)
The LED wil light up if active PoE is detected on the Endspan (pins 12/36) or Midspan (pins 45/78) . The POE Tester is applied to Equipment utilizing the following standards - IEEE 802.3af and IEEE 802.3at POE Plus. - compliant with Voltage within 37-57V
Light sequence as below
- End-Span indicator “light” on - POE Voltage is detected on pins 1,2,3,6
- Midspan indicator “light” on - POE Voltage is detected on pins 4,5,7,8
- No lights on - POE is not detected on the pin outs provided above
Operating Voltage 24V AC/DC^60V AC/DC
Operating Current <10mA
Insulation Voltage >1500VAC
CE complies EMC and RoSH2
Data & Networking structured wiring installation kit
An ideal kit for all Electrical and Datacomms Engineers
The Kit Includes:
Structured Wiring Cable tester
Used for the confirmation of wiring connection status on popular RJ45 based networks Includes a master and remote unit.
IDC Insertion tool
For the commonly used IDC connector system used in structured wiring accessories such as patch panels, data modules, linejacks and junction boxes.
RJ45 Plug Crimp Tool
Make your own patch cords up using this heavy duty hand tool.
Multi Function Network Cable Stripper
Easily strips the outer jacket of CAT5E, CAT6 and CAT6A Data Cables, both UTP and FTP types. Simply adjust the blade to suit using adjustment wheel and Spin the tool around the cable a couple of times using the handy moulded finger ring.
Strips Flat telephone cable
Removable coax cartridge for common types as outlined. No adjustment required
Cable cutter function
Krone Style IDC Punch down Tool
This is the standard UK Europe 2a tool for direct terminating on IDC connection blocks found on data and telecomm outlets.
Also used for terminating 237 connection strips. can be used for both UTP and FTP cables. Complete with removal tool.
Value RJ45 Continuity Tester
The tester is a small hand-held cable tester which enables you to quickly and easily verify the integrity of Ethernet twisted pair cables. In one second the tester is able to test for open pairs, shorted pairs, reversed pairs, crossed pairs and split pairs. The specially designed remote terminator is provided for one-person testing of installed cables.
It is able to test the entire network system or individual patch cables.
Can test either twisted pair cable or telephone cable.
Suitable for RJ45, RJ11 and RJ12 testing
RJ45/RJ11/USB/BNC Continuity Tester
Comprising of a main unit and detachable remote, the compact device is the ideal portable tester. Cable verification is possible before and after installation. To operate simply press the button and the step by step LED test begins. Each LED automatically switches off after testing to save power.
Compact device with audio alert that allows local & remote cable testing
Tests all common network types: RJ45 (UTP/STP), RJ11, USB and BNC
Separate LEDs which test for Open/Short wiring (1 LED), Connected wires display (9 separate LEDs), no wire or BNC terminator (1 LED), wrong connection or non-parallel connection (2 LEDs)