Juniper Compatible 25G SR (multimode) Transceiver
The 25G SR Multimode Transceiver is a single-Channel, Pluggable, Fibre-Optic SFP28 module for 25 Gigabit Ethernet and lnfiniband EDR Applications. It is a high-performance module for short-range data communication and interconnect applications which operate at 25.78125 Gbps up to 70m using OM3 fibre or 100 m using OM4 fibre.
This module is designed to operate over multi-mode fibre systems using a nominal wavelength of 850nm.
The electrical interface uses a 20 contact edge type connector.
The optical interface uses duplex LC receptacle.
This module incorporates proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.
Features:
Hot-pluggable SFP28 form factor
850nm LC Connector
Supports 25.78Gbps data rate
Maximum link length of 70m on OM3 MMF and 100m on OM4 MMF
850nm VCSEL laser and PIN photo-detector
Internal CDR on both Transmitter and Receiver channel
Duplex LC receptacle
Single 3.3V power supply
Power dissipation < 1W
Digital diagnostics functions are available via the
I2C interface
RoHS-6 compliant
Commercial case temperature range: 0°C to 70°C
Applications:
25.78GBASE-SR Ethernet
32G Fibre Channel
Mellanox Compatible 25G SR (multimode) Transceiver
The 25G SR Multimode Transceiver is a single-Channel, Pluggable, Fibre-Optic SFP28 module for 25 Gigabit Ethernet and lnfiniband EDR Applications. It is a high-performance module for short-range data communication and interconnect applications which operate at 25.78125 Gbps up to 70m using OM3 fibre or 100 m using OM4 fibre.
This module is designed to operate over multi-mode fibre systems using a nominal wavelength of 850nm.
The electrical interface uses a 20 contact edge type connector.
The optical interface uses duplex LC receptacle.
This module incorporates proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.
Features:
Hot-pluggable SFP28 form factor
850nm LC Connector
Supports 25.78Gbps data rate
Maximum link length of 70m on OM3 MMF and 100m on OM4 MMF
850nm VCSEL laser and PIN photo-detector
Internal CDR on both Transmitter and Receiver channel
Duplex LC receptacle
Single 3.3V power supply
Power dissipation < 1W
Digital diagnostics functions are available via the
I2C interface
RoHS-6 compliant
Commercial case temperature range: 0°C to 70°C
Applications:
25.78GBASE-SR Ethernet
32G Fibre Channel
Intel Compatible 25G SR (multimode) Transceiver
The 25G SR Multimode Transceiver is a single-Channel, Pluggable, Fibre-Optic SFP28 module for 25 Gigabit Ethernet and lnfiniband EDR Applications. It is a high-performance module for short-range data communication and interconnect applications which operate at 25.78125 Gbps up to 70m using OM3 fibre or 100 m using OM4 fibre.
This module is designed to operate over multi-mode fibre systems using a nominal wavelength of 850nm.
The electrical interface uses a 20 contact edge type connector.
The optical interface uses duplex LC receptacle.
This module incorporates proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.
Features:
Hot-pluggable SFP28 form factor
850nm LC Connector
Supports 25.78Gbps data rate
Maximum link length of 70m on OM3 MMF and 100m on OM4 MMF
850nm VCSEL laser and PIN photo-detector
Internal CDR on both Transmitter and Receiver channel
Duplex LC receptacle
Single 3.3V power supply
Power dissipation < 1W
Digital diagnostics functions are available via the
I2C interface
RoHS-6 compliant
Commercial case temperature range: 0°C to 70°C
Applications:
25.78GBASE-SR Ethernet
32G Fibre Channel
Fortinet Compatible 25G SR (multimode) Transceiver
The 25G SR Multimode Transceiver is a single-Channel, Pluggable, Fibre-Optic SFP28 module for 25 Gigabit Ethernet and lnfiniband EDR Applications. It is a high-performance module for short-range data communication and interconnect applications which operate at 25.78125 Gbps up to 70m using OM3 fibre or 100 m using OM4 fibre.
This module is designed to operate over multi-mode fibre systems using a nominal wavelength of 850nm.
The electrical interface uses a 20 contact edge type connector.
The optical interface uses duplex LC receptacle.
This module incorporates proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.
Features:
Hot-pluggable SFP28 form factor
850nm LC Connector
Supports 25.78Gbps data rate
Maximum link length of 70m on OM3 MMF and 100m on OM4 MMF
850nm VCSEL laser and PIN photo-detector
Internal CDR on both Transmitter and Receiver channel
Duplex LC receptacle
Single 3.3V power supply
Power dissipation < 1W
Digital diagnostics functions are available via the
I2C interface
RoHS-6 compliant
Commercial case temperature range: 0°C to 70°C
Applications:
25.78GBASE-SR Ethernet
32G Fibre Channel
Cisco Systems Compatible 25G SR (multimode) Transceiver
The 25G SR Multimode Transceiver is a single-Channel, Pluggable, Fibre-Optic SFP28 module for 25 Gigabit Ethernet and lnfiniband EDR Applications. It is a high-performance module for short-range data communication and interconnect applications which operate at 25.78125 Gbps up to 70m using OM3 fibre or 100 m using OM4 fibre.
This module is designed to operate over multi-mode fibre systems using a nominal wavelength of 850nm.
The electrical interface uses a 20 contact edge type connector.
The optical interface uses duplex LC receptacle.
This module incorporates proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.
Features:
Hot-pluggable SFP28 form factor
850nm LC Connector
Supports 25.78Gbps data rate
Maximum link length of 70m on OM3 MMF and 100m on OM4 MMF
850nm VCSEL laser and PIN photo-detector
Internal CDR on both Transmitter and Receiver channel
Duplex LC receptacle
Single 3.3V power supply
Power dissipation < 1W
Digital diagnostics functions are available via the
I2C interface
RoHS-6 compliant
Commercial case temperature range: 0°C to 70°C
Applications:
25.78GBASE-SR Ethernet
32G Fibre Channel
Arista Compatible 25G SR (multimode) Transceiver
The 25G SR Multimode Transceiver is a single-Channel, Pluggable, Fibre-Optic SFP28 module for 25 Gigabit Ethernet and lnfiniband EDR Applications. It is a high-performance module for short-range data communication and interconnect applications which operate at 25.78125 Gbps up to 70m using OM3 fibre or 100 m using OM4 fibre.
This module is designed to operate over multi-mode fibre systems using a nominal wavelength of 850nm.
The electrical interface uses a 20 contact edge type connector.
The optical interface uses duplex LC receptacle.
This module incorporates proven circuit and VCSEL technology to provide reliable long life, high performance, and consistent service.
Features:
Hot-pluggable SFP28 form factor
850nm LC Connector
Supports 25.78Gbps data rate
Maximum link length of 70m on OM3 MMF and 100m on OM4 MMF
850nm VCSEL laser and PIN photo-detector
Internal CDR on both Transmitter and Receiver channel
Duplex LC receptacle
Single 3.3V power supply
Power dissipation < 1W
Digital diagnostics functions are available via the
I2C interface
RoHS-6 compliant
Commercial case temperature range: 0°C to 70°C
Applications:
25.78GBASE-SR Ethernet
32G Fibre Channel
The CE UACC-OM-SFP28-SR Ubiquiti Compatible Transceiver is an SFP28 optical module supporting 25 Gbps connectivity over multi-mode fibre. It uses 850 nm transmission and reception wavelengths with a duplex LC UPC connector, providing distances of up to 100 metres over OM4 fibre and 70 metres over OM3 fibre.
Key Features of CE Ubiquiti Compatible Transceiver
SFP28 optical transceiver for 25 Gbps connectivity
850 nm TX and RX wavelength
Supports multi-mode fibre
Up to 100 m over OM4 fibre
Up to 70 m over OM3 fibre
Duplex LC UPC connector
Supports 1 Gbps, 10 Gbps and 25 Gbps data rates
25 Gbps Multi-Mode Fibre
The transceiver provides 25 Gbps connectivity using multi-mode fibre and an 850 nm wavelength. Ubiquiti specifies support for distances up to 100 metres with OM4 fibre and 70 metres with OM3 fibre.
Broad Interface Compatibility
The module uses an SFP28 form factor with a duplex LC UPC connector and supports 1 Gbps, 10 Gbps and 25 Gbps data rates. Ubiquiti also lists compatibility with SFP28, SFP+ and SFP interfaces.
Operating Specifications
The module has a maximum power consumption of 0.8 W and operates across an ambient temperature range of 0 °C to 70 °C. It is supplied as a single optical module for use with compatible networking equipment.
The CE 845398-B21 HPE Compatible SFP28 Transceiver provides 25GbE connectivity using the 25GBASE-SR standard over multimode fibre. It operates at an 850nm wavelength and supports connections up to 100m when used with OM4 fibre, while OM3 fibre supports distances up to 70m.
Key Features of CE HPE Compatible SFP28 Transceiver
25GbE 25GBASE-SR connectivity
850nm wavelength
Multimode fibre support
Up to 70m over OM3 fibre
Up to 100m over OM4 fibre
SFP28 form factor
Duplex LC connector
25GbE Fibre Connectivity
This SFP28 transceiver supports 25GBASE-SR Ethernet connectivity over multimode fibre, providing a 25GbE interface for compatible networking equipment.
SFP28 Form Factor
A duplex LC connector and compact SFP28 form factor provide a fibre interface for compatible 25GbE network ports. The module operates from a 3.3V supply with maximum power consumption of 1.5W.
