8 Port 10/100 Fast Ethernet Switches

D-Link DES 1008D Switch 8 ports

D-Link DES 1008D Switch 8 ports

D-Link switches are economical to own, simple to operate, and flexible for use in a variety of applications. They present effective, affordable and easy-to-implement solutions to meet demands for higher network loads and quicker response time in small workgroups or medium-sized departments.

Blazing speed and raw power are what you get from top-of-the-line DES-1008 switches. Ultimate 10BASE-T/100BASE-TX flexibility is achieved through a series of NWay ports, and in full duplex mode, any workstation in your network can receive 20Mbps or 200Mbps of data from any port.




Product Highlights: Complies with IEEE 802.3 and IEEE802.3u Standards
8 NWay 10M/100M auto-detect Ethernet/Fast Ethernet ports
Full/Half duplex for each port
Operating at maximum packet filtering and forwarding rate







D-Link DES 1008D Switch 8 ports D-Link switches are economical to own, simple to operate, and flexible for use in a variety of applications. They present effective, affordable and easy-to-implement solutions to meet demands for higher network loads and quicker response time in small workgroups or medium-sized departments. Blazing speed and raw power are what you get from top-of-the-line DES-1008 switches. Ultimate 10BASE-T/100BASE-TX flexibility is achieved through a series of NWay ports, and in full duplex mode, any workstation in your network can receive 20Mbps or 200Mbps of data from any port.



Specifications Basic switching RJ-45 Ethernet ports quantity 8 MAC address table 8000 entries Maximum data transfer rate 0.1 Gbit/s Packet buffer memory 0.256 MB Storage temperature (T-T) 0 - 50 °C Storage temperature (T-T) -10 - 70 °C Operating relative temperature (T-T) 10 - 90% Power consumption (typical) 2 W

The DES-108 Fast Ethernet Switch provides a quick, easy and economical way to add high speed networking to home offices, small and medium businesses. With data transfer speeds of up to 200 Mbps the DES-108 is ideal for fast file transfers. It provides eight ports for easy expansion of your network for connecting printers, scanners, storage, and backup devices to any network.

Key Features

Inexpensive Fast Ethernet solution for businesses.
Eight 10/100 Mbps Fast Ethernet ports
Rugged Metal Housing
Auto MDI/MDIX crossover for all ports
Full/half-duplex for Ethernet/Fast Ethernet speeds
IEEE 802.3x Flow Control
Supports Jumbo Frames
Supports 802.1p QoS
RoHS compliant
Plug-and-play installation
Slot for Kensington Security lock
Robust Design

The  DES-108 is designed with durability and performance in mind. Their sturdy metal housing ensures the  roduct can withstand extreme temperatures and can be placed in typical industrial environments such as factories, construction and mining. They help to dissipate heat and reduce stress on internal components.

Effortless High Speed Networking

They are easy access, auto-sensing 10/100 front Ethernet ports with two LED indicators per port to quickly distinguish link status and speed. The DES-108 switches also support Auto MDI/MDIX Crossover allowing each port to be plugged directly to a server, hub, router, or switch using regular straight-through twisted-pair Ethernet cables. Support for IEEE 802.1p QoS is included, which organises and prioritises time-sensitive and important data for efficient delivery.

IEEE 802.1p QoS

QoS prioritises network traffic so that time-sensitive data is delivered efficiently, even during bursts of high data traffic.This helps ensure an optimal experience for streaming media and VoIP calls.

8-Port 10/100Mbps Desktop Switch with 4-Port PoE provides the seamless network connection. It integrates 100Mbps Fast Ethernet and 10Mbps Ethernet network capabilities.

4 of the 8 Auto-Negotiation RJ45 ports (port-1 to port-4) of the switch support Power over Ethernet (PoE) function. These PoE ports can automatically detect and supply power with those IEEE 802.3af compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc.

Features:

Supports PoE power up to 15.4W for each PoE port
Supports PoE power up to 53W for all PoE ports
Supports PoE IEEE 802.3af compliant PDs
Supports IEEE 802.3x flow control for Full-duplex Mode and backpressure for Half-duplex Mode
2K entry MAC address table of the TL-SF1008P with auto-learning and auto-aging
LED indicators for monitoring power, link, activity and speed
External power adapter supply
Overload Arrangement

TL-SF1008P has the priority* function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is >= 53W, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port.

Port Priority Function

Priority (port-1>port-2>port-3>port-4): This function will help protect the system if the system power becomes overloaded. For example, Port 1, 2 and 4 are using 15.4w (maximum power per port is 15.4W), the system power is 46.2w in total (PoE max LED is red ). If there is an additional PD inserted to Port 3 with 10w then the system will cut off Port 4 to protect the system, this means Port 1, 2 will use 15.4w, and Port3 will use 10w, and no power will be supplied to Port 4.

Easy To Use

TL-SF1008P is easy to install and use. It requires no configuration and installation. With desktop design, outstanding performance and quality, the TP-LINK TL-SF1008P 8-Port 10/100Mbps Desktop Switch with 4-Port PoE is a great selection for expanding your home or office network.

Switch Comparison

SF1008P SG1008P SG1008PE SF1008D SF1005P Form Factor Desktop Desktop Desktop, Rackmount Desktop Desktop Switch Management Unmanaged Case Type Metal Metal Metal Plastic Metal Port Speed Fast Ethernet Gigabit Gigabit Fast Ethernet Fast Ethernet Copper  (RJ-45) Ports 8 8 8 8 5 Traffic Prioritisation No Yes Yes Yes Yes PoE/PoE+ Ports 4 x PoE 802.3af 4 x PoE 802.3af 8 x PoE+ 802.3at N/A 4 x PoE 802.3af PoE Total Budget 53W 55W 126W N/A 58W Power Supply 1 external 1 external 1 external 1 external 1 external Fan Fanless Fanless 1 Fanless Fanless Dimensions (WxDxH) 171 x 98 x 27 mm 171 x 98 x 27 mm 294 x 180 x 44 mm  134.5 x 79 x 22.5 mm 100 x 98 x 22.5 mm   Buy Buy Buy Buy Buy

The DES-1008PA 8-Port Fast Ethernet PoE Desktop Switch enables both home and office users to easily connect and supply power to Power over Ethernet (PoE) devices such as wireless Access Points (APs), IP cameras, and IP phones while adding more Ethernet devices like computers, printers, and Network Attached Storage (NAS) onto a network. Built with home and small business users in mind, this compact PoE switch operates silently, making it ideal for use in virtually any room or office.

Features

Eight 10/100 Mbps Fast Ethernet ports
Full/half-duplex for Ethernet/Fast Ethernet speeds
IEEE 802.3af PoE
4 PoE ports, each supporting up to 15.4W
PoE budget of 52W
IEEE 802.3x flow control
Store-and-forward switching scheme
RoHS compliant
Plug-and-play installation
Auto MDI/MDIX crossover for all ports
Compact lightweight chassis
Ports located conveniently at the rear
Silent operation
Power over Ethernet IEEE 802.3af

The DES-1008PA features 4 10/100BASE-TX ports that support the IEEE 802.3af PoE protocol. Each of the 4 PoE ports can supply up to 15.4 Watts, a total PoE budget of 52 Watts, allowing users to attach an IEEE 802.3af compliant device to the DES-1008PA without requiring additional power. PoE is especially suitable for devices that are far from power outlets or when you want to minimise the clutter of extra cables.

Superior Performance

No configuration is required and installation is quick and easy. Support for Auto-MDI/MDI-X on all ports eliminates the need for crossover cables when connecting to another switch or hub. Auto-Negotiation on each port senses the link speed of a network device (either 10 or 100 Mbps) and intelligently adjusts for compatibility and optimal performance. The switch has been designed without fans so you can be sure of silent operation wherever it is installed. The DES-1008PA also features diagnostic LEDs, which display status and activity, allowing you to quickly detect and correct problems on the network. With wire-speed filtering and store-and-forward switching, the DES-1008PA also maximises network performance while minimising the transmission of bad network packets. Combining the convenience of PoE, superior performance, and ease of use, the 8-Port Fast Ethernet PoE Desktop Switch is the ideal choice for adding PoE devices to either a home or small business network.

Hassle-Free Setup

The 8-Port Fast Ethernet PoE Desktop Switch is a Plug-and-Play device that requires no configuration, so setup is simple and hassle-free. Connect multiple computers, share files, music, and video across your home or small office network, or even create a multi-player gaming environment.

Compact and Silent

The DES-1008PA has a compact and silent design, meaning it can be placed in any location. The power connector and ports are all located at the rear of the switch allowing the cables to be tucked away conveniently. The DES-1008PA is fanless, so the switch operates silently, allowing you to work or play without unnecessary noise distractions.

Get Easy-to-Use Switches with Zero Configuration

Build a fast, reliable network with these entry-level, low-cost, reliable networking solutions that provide plug-and-play connectivity. The Cisco SF110D-08HP Unmanaged Switches deliver Fast Ethernet switching with key features like Power over Ethernet (PoE), energy efficiency, traffic prioritisation, and network diagnostics for seamless integration into the rest of the network.

Features and Capabilities

The SF110D-08HP Cisco Small Business 110 Series Unmanaged Switches deliver wire-speed Fast Ethernet connectivity to connect your small business office. The 8 Port switches offer plug-and-play basic Layer 2 connectivity. That includes low-cost PoE, quality of service (QoS), cable diagnostics, and loop detection - all in a switch that you can set up by yourself in just minutes.

Features:


8 Port 10/100 Fast Ethernet Unmanaged Desktop Switch With 4 Ports PoE
Delivers powerful network performance and flexibility for small business networks, without the complexity. With no installation software and nothing to configure, you get an affordable, reliable network that just works right out of the box
Power over Ethernet:
PoE provides power budget of 32 Watts to IP phones, access points, and other devices.
QoS intelligence
Prioritises delay-sensitive services such as voice or video to improve your network's performance
An eco-friendly solution
A variety of power-saving features, including Energy-Efficient Ethernet, optimises power usage and reduces energy consumption without compromising performance.
Ease of use
Ready to use right out of the box, there is no software to install and nothing to configure.
Simple setup: Designed for small office spaces, desktop models offer a wall-mount option for discreet mounting under a desk or on the wall of an office or conference room
Switch Comparison

SF110D-05 SF110D-08 SF110D-08HP SG110D-05 SG110D-08 SG110D-08HP Form Factor Desktop Desktop Desktop Desktop Desktop Desktop Ports 5 x 10/100 8 x 10/100 8 x 10/100 5 x 10/100/1000 8 x 10/100/1000 8 x 10/100/1000 Number of PoE Ports     4     4 Power Dedicated to PoE     32 watts     32 watts Features Flow control, Layer 2 switching, auto-negotiation, auto-uplink (auto MDI/MDI-X), Weighted Round Robin (WRR) queuing, quality of service (QoS), cable diagnostics, loop detection, Energy Efficient Ethernet Status indicators Power, link/activity, cable diagnostics, loop detection Power, link/activity, cable diagnostics, loop detection Power, link/activity, PoE, cable diagnostics, loop detection Power, link/activity, cable diagnostics, loop detection Power, link/activity, cable diagnostics, loop detection Power, link/activity, PoE, cable diagnostics, loop detection Jumbo frame support     Performance Switching capacity: 1Gbps, Forwarding performance (64-byte packet size): 0.74 Mpps Switching capacity: 1.6Gbps, Forwarding performance (64-byte packet size): 0.74 Mpps Switching capacity: 1.6Gbps, Forwarding performance (64-byte packet size): 0.74 Mpps Switching capacity: 10Gbps, Forwarding performance (64-byte packet size): 11.9 Mpps Switching capacity: 16Gbps, Forwarding performance (64-byte packet size): 11.9 Mpps Switching capacity: 16Gbps, Forwarding performance (64-byte packet size): 11.9 Mpps Power Supply 1 external 1 external 1 external 1 external 1 external 1 external Fanless Physical Specifications 93(w) x 27(h) x 91(d)mm 130(w) x 27(h) x 130(d)mm 160(w) x 30(h) x 129(d)mm 110(w) x 30(h) x 110(d)mm 140(w) x 33(h) x 140(d)mm 160(w) x 30(h) x 129(d)mm

The Cisco SF352-08 is an 8 port Fast Ethernet switch with 2 Gigabit Copper/SFP Combo Ports. The Cisco SF352-08 delivers the features you need to improve the availability of your critical business applications, protect your sensitive information, and optimise your network bandwidth to deliver information and applications more effectively. Easy to set up and use, the Cisco 350 Series provides the ideal combination of affordability and capabilities for small businesses and helps you create a more efficient, better-connected workforce. Features:


8 Port 10/100 Fast Ethernet Switch
2 Gigabit copper/SFP combo
Fanless
Secure desktop connectivity Cisco 350 Series Switches can simply and securely connect employees working in small offices with each other and with all of the servers, printers, and other devices they use. High performance and reliable connectivity help speed file transfers and data processing, improve network up-time, and keep your employees connected and productive.


Secure wireless connectivity With its advanced security features, Power over Ethernet, Auto Smartports, QoS, VLAN, and access control features, the Cisco 350 Series Switches are the perfect foundation to add business-grade wireless to a business network.


Unified communications As a managed network solution, the Cisco 350 Series provides the performance and advanced traffic-handling intelligence you need to deliver all communications and data over a single network. Cisco offers a complete portfolio of IP telephony and other unified communications products designed for businesses.


Highly secure guest connectivity Cisco 350 Series Switches let you extend highly secure network connectivity to guests in a variety of settings, such as a hotel, an office waiting room, or any other area open to non-employee users. Using powerful but easy-to-configure security and traffic segmentation capabilities, you can isolate your vital business traffic from guest services and keep guests' network sessions private from each other.


New simple mode web GUI and configuration wizards for most
intuitive management
New USB port added for easy image and configuration transfer
New MSTP support for flexible spanning tree deployment
Cisco Discovery Protocol and Cisco SmartPorts
Cisco FindIT Network Discovery Utility
Cisco Active Advisor for inventory, advisory, and life-cycle management
Built in Security 802.1X Authentication Virtual LANs Port Security DoS Prevention Reliable SMB Network Foundation Creates a reliable small business local area network Easily integrates with data, voice, video, and wireless products Easy to use, with a consistent interface across all Cisco® Small Business products

The Cisco SG352-08P is an 8 port Fast Ethernet PoE+ switch with 2 x combo SFP Ports and a PoE budget of 62 Watts. The Cisco SG352-08P delivers the features you need to improve the availability of your critical business applications, protect your sensitive information, and optimise your network bandwidth to deliver information and applications more effectively. Easy to set up and use, the Cisco 350 Series provides the ideal combination of affordability and capabilities for small businesses and helps you create a more efficient, better-connected workforce. Features:


8 Port 10/100 Fast Ethermet Switch
2 x Combo Gigabit SFP Ports
8 Ports Support 802.3af PoE, 802.3at PoE+, and 802.3xx 60W PoE.
PoE Budget of 62 Watts
External Power Supply
Secure desktop connectivity Cisco 350 Series Switches can simply and securely connect employees working in small offices with each other and with all of the servers, printers, and other devices they use. High performance and reliable connectivity help speed file transfers and data processing, improve network up-time, and keep your employees connected and productive.


Secure wireless connectivity With its advanced security features, Power over Ethernet, Auto Smartports, QoS, VLAN, and access control features, the Cisco 350 Series Switches are the perfect foundation to add business-grade wireless to a business network.


Unified communications As a managed network solution, the Cisco 350 Series provides the performance and advanced traffic-handling intelligence you need to deliver all communications and data over a single network. Cisco offers a complete portfolio of IP telephony and other unified communications products designed for businesses.


Highly secure guest connectivity Cisco 350 Series Switches let you extend highly secure network connectivity to guests in a variety of settings, such as a hotel, an office waiting room, or any other area open to non-employee users. Using powerful but easy-to-configure security and traffic segmentation capabilities, you can isolate your vital business traffic from guest services and keep guests' network sessions private from each other.


New simple mode web GUI and configuration wizards for most
intuitive management
New USB port added for easy image and configuration transfer
New MSTP support for flexible spanning tree deployment
Cisco Discovery Protocol and Cisco SmartPorts
Cisco FindIT Network Discovery Utility
Cisco Active Advisor for inventory, advisory, and life-cycle management
Built in Security 802.1X Authentication Virtual LANs Port Security DoS Prevention Reliable SMB Network Foundation Creates a reliable small business local area network Easily integrates with data, voice, video, and wireless products Easy to use, with a consistent interface across all Cisco® Small Business products

The FEP-0812 is a 8-port 10M/100M Fast Ethernet Switch with one uplink port plus 4 ports of Power over Ethernet capability. Per PoE port is power supply up to 30W. The total PoE power budget is 65W. It is an ideal solution where office and home users utilize a combination of PoE and non-PoE enabled devices.

Key Features
4 Fast Ethernet PoE ports and 4 Fast Ethernet ports
IEEE 802.3af/at PoE compliant to simplify deployment and installation
Auto-detection and protection of non-standard PoE devices
IEEE 802.3x Flow Control protects against lost packets for reliable data transmission
Four ports on the FEP-0812 are PoE enabled making it an ideal solution for most office users that have PoE enabled devices located around the office. These products can include a mixture of PoE IP Phones, PoE wifi APs and PoE IP Cam. It is the perfect answer for offices that are upgrading their office equipment and LAN infrastructure to include PoE capability. The switch automatically detects IEEE 802.3at/af compliant device connected and provides power and data over a single cable to these devices.

The FEP-0812 enables users to deploy a stable and reliable high-speed LAN environment, with store-and-forward switching architecture, packet error filtering and non-blocking packet forwarding. The 802.3x and backpressure flow control mechanisms work respectively for full and half duplex modes. This device supports N-way auto-negotiation protocol that automatically detects networking speed and duplex modes.

Package Contents
FEP-0812
Power Cord
Quick Installation Guide
For instant error detection, the FEP-0812 is equipped with a full range of LEDs to help monitor and troubleshoot problems on the network.

Product Diagram

Product Overview

The TL-SF1008LP is a Professional High-Power Switch with 4 PoE Ports, Plug and Play and PoE Transmission for Surveillance up to 250 m


Product Features
8× 10/100 Mbps RJ45 ports


4× PoE ports transfer data and power on individual cables


Works with IEEE 802.3af compliant PDs


Up to 250m data and power transmitting range under Extend Mode**


Priority Mode ensures high priority of ports 1–2 to guarantee the quality of sensitive application


Supports PoE Power up to 41 W for all PoE ports*


Plug and play with no configuration required

Dedicated 4-Port PoE Switch (41 W Budget) for Numerous Applications

Compliance with the 802.3af PoE standard supports up to 15.4 W on each PoE port. The total 41 W PoE power budget* for the 4× PoE ports opens up a wide range of applications, such as surveillance for offices, dormitories, and small businesses. It is fully compatible with IP cameras, access points, IP phones, computers, printers, and more.


Priority Video
Quality Guaranteed

Quality of sensitive applications like video monitoring in critical business areas is guaranteed by offering higher priority options for ports 1–2 when one-touch Priority Mode is on.  
Intelligent Power Management

When total power consumption exceeds 41 W, the intelligent power management will cut the lower priority port power.

This ensures the high priority port’s power supply and protects the device from power overload.

It also automatically detects and provides the required power for your PoE devices while protecting your PoE and non-PoE equipment from being damaged.  
Durable Metal Casing

The interior components of TL-SF1008LP are protected by high-quality metal casing to ensure a long product life.

Having passed an array of stringent reliability tests, TL-SF1008LP delivers switching performance you can depend on.

 

Product Overview

The TP-Link LiteWave Series Unmanaged Switches provide easy and affordable way to expand your wired network. They are easy to use and reliable. With these plug-and-play switches, you can expand your network connections to multiple devices instantly. With all ports support Auto-MDI/MDIX, there’s no need to worry about the type of cable to use.



Product Features

8× 10/100Mbos Auto-Negotiation RJ45 port, supporting Auto-MDI/MDIX


Green Ethernet technology saves power


IEEE 802.3X flow control provides reliable data transfer


Plastic casing and desktop design


Plug and play, no configuration needed


Fanless design ensures quiet operation

Go Green with Your Ethernet

The LiteWave Series also supports energy-efficient technology, helping you save power and money. Power consumption automatically adjusts according to link status and cable length, allowing you to expand your network while minimizing your carbon footprint. Save the planet and lower your energy bills - it’s a win-win!


Fanless and Desktop Design

Compact desktop design, to meet your needs in any environment. Besides, fanless design ensures quiet operation.


Use Where You Need, However You Need

The LS1008 is fully compatible with networked devices such as computers, printers, webcams, IPTVs. It has a wide range of application scenarios and is suitable for networking in school dormitories, surveillance, homes, and small businesses.

8-Port 10/100Mbps Desktop Network Switch TL-SF1008D Fast Ethernet Switch

Features

8 10/100Mbps auto-negotiation RJ45 ports, supports auto MDI/MDIX
Green Ethernet technology saves the power up to 60%
IEEE 802.3x flow control provides reliable data transfer
Plastic case, desktop design
Plug and play, no configuration required



 



What This Product Does

The TL-SF1008D Fast Ethernet Switch is designed for SOHO (Small Office/Home Office) or workgroup users. All 8 ports support auto MDI/MDIX, no need to worry about the cable type, simply plug and play. Moreover, with the innovative energy-efficient technology, the TL-SF1008D can save up to 60% of the power consumption and 70% of the packaging material can be recycled, making it an eco-friendly solution for your business network.




High Performance

TL-SF1008D Fast Ethernet Switch provides 8 10/100Mbps Auto-Negotiation RJ45 ports. All ports support Auto MDI/MDIX function, eliminating the need for crossover cables or Uplink ports. Featuring non-blocking switching architecture, TL-SF1008D forwards and filters packets at full wire-speed for maximum throughput.

With 10K Jumbo frame, the performance of large files transfers is improved significantly. And IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode alleviate the traffic congestion and make TL-SF1008D work reliably.




TP-LINK Green Technology

This new generation TL-SF1008D Fast Ethernet Switch features the latest innovative energy-efficient technologies that can greatly expand your network capacity with much less power. It automatically adjusts power consumption according to the link status and cable length to limit the carbon footprint of your network.

It also complies with the EU'S RoHS, prohibiting the use of certain hazardous materials. Besides, 70% of the packaging material can be recycled.




Easy to Use

The auto features of this switch make installation plug and play and hassle-free. No configuring is required. Auto MDI/MDIX eliminates the need for crossover cables. Auto-negotiation on each port senses the link speed of a network device (10, 100 Mbps) and intelligently adjusts for compatibility and optimal performance.

Product Overview

The TL-SF1009P is a Professional 9-Port Unmanaged Switch with 8 PoE+ Ports, Plug and Play and PoE Transmission for Surveillance up to 250 m


Product Features
9× 10/100 Mbps RJ45 ports


8× PoE+ ports transfer data and power on individual cables


Works with IEEE 802.3af/at compliant PDs


Supports PoE Power up to 30 W for each PoE port


Supports PoE Power up to 65 W for 8 PoE ports*


Up to 250 m data and power transmitting range under Extend Mode**


Priority Mode ensures high priority of ports 1–2 to guarantee the quality of sensitive application


Isolation Mode allows one-click client traffic separation for higher security and performance


Plug and play with no configuration required

Professional 9-Port Switch with 8-Port PoE+ (65 W Budget) for Numerous Applications

Compliance with the 802.3af/at PoE+ standard supports up to 30 W on each PoE port. The total 65 W PoE power budget* for the 8× PoE+ ports opens up a wide range of applications, such as surveillance for offices, dormitories, and small businesses. It is fully compatible with IP cameras, access points, IP phones, computers, printers, and more.


Priority Video
Quality Guaranteed

Quality of sensitive applications like video monitoring in critical business areas is guaranteed by offering higher priority options for ports 1–2 when one-touch Priority Mode is on.  
One-Click Traffic Separation for Ports 1-8

With one click, Isolation Mode easily divides traffic for ports 1–8 to avoid snooping and tampering.

This enables the switch to isolate broadcast storm, improving LAN security and data transmission.  
Intelligent Power Management

When total power consumption exceeds 65 W, the intelligent power management will cut the lower priority port power.

This ensures the high priority port’s power supply and protects the device from power overload.

It also automatically detects and provides the required power for your PoE devices while protecting your PoE and non-PoE equipment from being damaged.  
Durable Metal Casing

The interior components of TL-SF1009P are protected by high-quality metal casing to ensure a long product life.

Having passed an array of stringent reliability tests, TL-SF1009P delivers switching performance you can depend on.

 

TP-Link desktop switch TL-SL1311MP is an unmanaged switch with 8× 10/100Mbps ports and 3× Gigabit ports that requires no configuration. With 8× PoE (Power over Ethernet) ports, it can automatically detect and supply power with all IEEE 802.3af/at compliant Powered Devices (PDs). In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc.




Features

8× 10/100 Mbps RJ45 Ports, 2× Gigabit RJ45 Ports, 1× Gigabit SFP Port
8× PoE+ ports transfer data and power on individual cables
Works with IEEE 802.3af/at compliant PDs
Supports PoE Power up to 30 W for each PoE port
Supports PoE Power up to 124 W for 8 PoE ports
Up to 250 m data and power transmitting range under Extend Mode
Isolation Mode allows one-click client traffic separation for higher security and performance
PoE Auto Recovery guarantees stable operation of PoE devices by automatically rebooting the dropped or unresponsive PD devices
Fanless Design reduces power consumption and works silently in its location
Plug and play with no configuration required
 



Professional 11-Port Switch with 8-Port PoE+ (124 W Budget) for Numerous Applications

Compliance with the 802.3af/at PoE+ standard supports up to 30 W on each PoE port. The total 124 W PoE power budget* for the 8× PoE+ ports opens up a wide range of applications, such as surveillance for offices, dormitories, and small businesses. It is fully compatible with IP cameras, access points, IP phones, computers, printers, and more.




Ideal for IP Surveillance-Long-Range PoE Transmission and One-Click Traffic Separation

With Extend Mode, the PoE transmission distance reaches up to 250 m — perfect for IP Camera deployment in large areas. With one click, Isolation Mode easily divides traffic for ports 1–8 to avoid snooping and tampering. This enables the switch to isolate broadcast storm for higher security and performance.




Durable Metal Casing

The interior components of TL-SG1210MP are protected by high-quality metal casing to ensure a long product life. Its fanless design delivers zero added noise in its locations. Having passed an array of stringent reliability tests, TL-SG1210MP delivers switching performance you can depend on.




Intelligent Power Management

When total power consumption exceeds 123 W, intelligent power management will cut the lower priority port power. This ensures the high-priority port’s power supply and protects the device from power overload. It also automatically detects and provides the required power for your PoE devices while protecting your PoE and non-PoE equipment from being damaged.

D-Link DSS-100E-9P Fast Ethernet PoE Unmanaged Surveillance Switch

The DSS-100E-9P is part of D-Link’s premier Power over Ethernet (PoE) Surveillance Switch series. They are the safest, most reliable and all-round best solutions for surveillance deployments. 

Designed for Surveillance The DSS-100E-9P comes with powerful PoE capabilities. Able to supply up to 30W per port with a total power budget of 230W to devices up to 250m away, it can be the heart of your surveillance setup. Simply connect your PoE supported devices and you’ve got a capable surveillance network with minimal wiring required. Finally, its Gigabit uplink provides ample bandwidth. This ensures smooth transmission of footage when connecting to a Network Video Recorder (NVR) or core switch. 

Reach Further The DSS-100E-9P surveillance switch can be combined with the DPE-302GE PoE extender to maximize your PoE camera deployment virtually anywhere, drastically lowering the cost for installing any PoE Ethernet devices. It provides huge time and cost savings and greater flexibility of endpoint positioning. - Power your device up to a distance of 650 meters at 10Mbps - Innovative design reduces long distance power transmission loss - Leverages existing copper twisted-pair cabling to deliver electrical power over the same network connection 

Versatility for a Range of Scenarios The DSS-100E-9P is designed for a surveillance scenario, therefore it is ready to support all related devices. Simply plug in the devices you need to complete your setup and the switch can automatically detect what has been connected. It then adjusts according to provide optimal performance. Ideal for a power surveillance with minimal management fuss. 

Weather the Storm The DSS-100E-9P is equipped with 6kV surge protection. This keeps the switch safe against lightning strikes or other power related incidents. This shield will prevent PoE devices from damage, ensuring your vital surveillance systems continue functioning uninterrupted. 

Plug & Play The DSS-100E-9P is developed with simple setup in mind. No configuration is required, simply connect the switch to your network and you are ready to go. You can start adding IP cameras, IP phones and other PoE capable devices to your network. Meanwhile, the switch will automatically detect what has been connected and intelligently adjust according to compatibility and optimal performance. It is ideal for those who want a powerful network, without the fuss of managing it. 

Compatible with a Wide Range of D-Link PoE-Enabled Cameras Security is imperative for SMBs and large corporations alike. Run a video surveillance camera system in your business with our surveillance switches and connect multiple PoE enabled cameras wherever you wish.

The DIS-100E-8W Industrial Fast Ethernet Unmanaged Switch is designed specifically to withstand wide temperature range, vibrations and shock. These rugged, yet easy to deploy, switches have superior environmental specification compared to those of commercial network switches. With its hardened design combined with high availability network features, these switches form vital parts of any network infrastructure facilitating the increasing demand for smart cities, city-wide surveillance and wireless connectivity. The DIS-100E-8W Unmanaged Switch provides 8 Fast Ethernet ports and is designed for supporting standard industrial applications without complex setup to make the network truly plug-and-play.

Features

8 x 10/100BaseT(X) ports
Unmanaged plug-and-play simplicity
Hardened housing and Discreet size
Withstands extreme temperatures
Certified for vibration, shock, free-fall, EMC
Fan-less design
Unmanaged Plug and Play
Unmanaged Plug and Play Plug in and go. The DIS-100E-8W reliably forwards Ethernet frames Fast Ethernet Connectivity
Designed with 8 x 10/100BaseT(X) Fast Ethernet ports to suit your network layout. Officially Certified
Certifications for vibration, shock, free-fall and electromagnetic compatibility to maximise network uptime in a variety of deployment environments, including smart city surveillance, factory automation, and outdoor wireless networks. Strong Build
The tough housing has been created to keep your network protected and reliably rugged. That’s why every DIS-switch comes with a 5-year D-Link warranty. Fanless Design
With no moving parts inside to reduce downtime and maintenance call outs, the rugged housing has been optimised for the transfer of heat. Withstands Extreme Temperatures
Operates effortlessly in a range of industrial and harsh environments in temperatures from -40°C to +75°C, and can cold start from -40°C. Fast Deployment
For instant installation it features a snap-to-DIN-rail clip, and also supports wall mounting. Discrete Size
Small but mighty. To make the most of cabinet space, it measures: 117.8 x 39 x 96.9 mm.



Created to withstand extreme heat and below-freezing temperatures

The DIS switches are designed to easily handle hot and cold temperature variances and can cold start at their coldest temperatures. With superior environmental protections to commercial switches, these switches are reliable in a huge variety of field applications.

 



Easy to Deploy

Suited to outdoor cabinet environments, the DIS-100E has multiple mounting options. .

Their compact sizes make efficient use of curbside cabinet space, and they feature snap-to-rail clips for instant deployment.



 

 

Built tough, built to last

With their strong build, the whole family of DIS industrial switches are certified against vibration, shock and free-fall. Comes with D-Link 5-year warranty as standard.



Fanless Design

Heat is steadily dissipated through the rugged build which has been optimised for the transfer of heat.

With no moving parts inside, the DIS family prioritises network uptime reducing the need for maintenance call outs.

TRENDnet's Industrial Fast Ethernet DIN-Rail Switches feature a rugged IP30 rated metal enclosure. 

These industrial Ethernet switches are designed to withstand high levels of vibration and shock, operate in both low and high temperatures for industrial environments within a -40°C to 75°C wide-temperature range. 

Redundant power inputs with overload current protection on each industrial Ethernet switch minimizes network downtime.


Key Features:



8 x Fast Ethernet ports
1.6Gbps switching capacity
Forwarding rate: 1.19Mpps (64-byte packet size)
Hardened IP30 rated metal switch
Includes DIN-Rail mount and wall mount brackets
Wide operating temperature range of -40°C to 75°C
Dual inputs provide redundant power with overload current protection
Alarm relay triggered by power failure
Power supply sold separately (model: TI-M6024)
Fanless design for silent operation



Datasheets / User Manuals / Quick Start Guides can be downloaded from our Documentation tab (above)

TRENDnet's Industrial Fast Ethernet PoE+ DIN-Rail Switches feature a rugged IP30 rated metal enclosure. 

These industrial unmanaged PoE+ switches are designed to withstand a high degree of vibration and shock, while operating in both high and low temperatures for industrial environments within -40°C to 75°C. 

Redundant power inputs with overload current protection on each industrial unmanaged PoE+ switch minimizes network downtime.

Installers and integrators can save on equipment costs and reduce installation time with TRENDnet's Industrial Fast Ethernet Switches by delivering up to 30W per port of PoE power and data over existing Ethernet cables. 


Key Features:

8 x Fast Ethernet PoE+ ports
200W PoE power budget
1.6Gbps switching capacity
Hardened IP30 rated metal switch
Includes DIN-Rail mount and wall mount brackets
Wide operating temperature range of -40°C to 75°C
Dual inputs provide redundant power with overload current protection
Alarm relay triggered by power failure
Power supply sold separately (model: TI-S24048)



With PoE technology, users only need one set of cables to deliver both data and power from the industrial unmanaged PoE+ switch. With these industrial unmanaged PoE+ switches, easily network PoE devices such as high-power wireless access points, PTZ and other advanced IP cameras, VoIP phone systems, IPTV decoders, access controls, and more.


Datasheets / User Manuals / Quick Start Guides can be downloaded from our Documentation tab (above)

Features:

4 x 10/100Mbps PoE ports
4 x 10/100Mbps ports
30W PoE power budget
1.6Gbps switching capacity
Sturdy metal switch
Plug and Play installation
Lifetime Warranty*
TRENDnet’s 8-Port 10/100Mbps PoE Switch, model TPE-S44, offers 4 x 10/100Mbps PoE ports, 4 x 10/100Mbps ports, a 1.6Gbps switching capacity, and a PoE power budget of 30 Watts. Plug and Play this sturdy metal switch for reliable high speed PoE networking.

PoE Power 
A 30W PoE power budget supplies up to four Power over Ethernet devices with PoE power.




Fast Ethernet 
Eight 10/100 Mbps fast ethernet ports produce a 1.6Gbps switching capacity to support edge network installations.



Compact Design 
With a compact and lightweight housing design this switch is well-suited for desktop installations. Its fanless design is perfect for quiet environments that require silent operation.
  PoE 
Supplies up to 15 Watts of PoE power per PoE port with a 30 Watt power budget Ports 
4 x 10/100Mbps PoE ports and 4 x 10/100Mbps ports Switching Capacity 
1.6 Gbps switching capacity Energy Savings 
Embedded GREENnet technology reduces power consumption by up to 40%* Housing 
Rugged metal enclosure LED Indicators 
LED indicators convey port status

Dedicated for Surveillance With Uplink & NVR double uplink ports and QoS



6kV lightning Protection

One-key VLAN

250m Extend mode  

QoS

Dual uplink ports   Dual uplink port, more convenient for connecting Router and NVR

TEF1110P-8-63W is an unmanaged PoE switch with 2 uplink ports that can connect with Router & NVR. Compliant with IEEE 802.3at/af standards, it can identify PoE-powered devices intelligently. The switch supplies a maximum PoE power output of 58W, and 30 W for a single port. TEF1110P-8-63W is an ideal choice for SMBs, supermarkets and restaurants with small-sized video surveillance requirement.

Up to 250 meters long distance transmission under the Extend Mode, beyond hundred meters transfer limitation

Due to the complex monitoring environment, the distance from each terminal to the monitoring center is different, some even more than hundred meters. TEF1110P-8-63W can support 250 meters data transmission under the Extend mode, which can save the cost of your project with less devices used.

Excellent lightning Protection

TEF1106P-4-63W supports professional lightning protection of 6KV for uplink ports & 4KV for power, which can protect the switch from the inductive lightning strike coming from the thunderstorm weather.

QoS Priority design makes the key video data to be prioritized

1-2 ports support QoS Priority function, and it will prioritize them when meeting network congestion, which can ensure the network stable and fluent transmission of the surveillance video without breaking up.

One-key Port VLAN Setup

With Extend mode on, port 1-8 are isolated from each other, but can still communicate with the 2 uplink ports. These function can enable the switch to isolate broadcast storm, and improve LAN security and data transmission.

The TEF1109P-8-63W has network extension technology. Based on the original twisted pair, it can support up to 250 meters long distance transmission, breaking the hundred meters transfer limit. With 6KV lightning protection, it is the real monitoring private switch. Ports 1-8 support IEEE 802.3at and IEEE 802.3af PoE standard. It provides a maximum PoE output power of 30W to each port and 58W to the whole device.

Lead security transmission power supply to a higher level
TEF1109P-8-63W 9-Port 10/100Mbps Desktop Switch With 8-Port PoE
6KV Lightning Protection | long distance transmission
Maximum PoE Output Power 58W | PoE power up to 30W for each PoE port
Up to 250 meters long distance transmission, beyond hundred meters transfer limit

Due to the complex monitoring environment, when making cabling and networking, it’s very often to encounter the problem of inadequate network transmission distance. The distance of each camera terminal to the monitoring centre is different, some only a few meters, some hundred metres, while others can be kilometres away. The Tenda TEF11 series PoE monitoring switches exclusive patent network extension technology, uses the common existing twisted pair, can support 250 metres data transmission, breaks the existing twisted pair hundred metres transmission limit; Provides a gigabit linked SFP port and can meet the demand of transmission up to 250 metres.

6KV lighting protection PoE switch is the real monitoring private switch

For surveillance projects, cameras are often installed in an outdoor environment or a higher position, which also increases the camera and PoE switches probability of a lightning shock. This could result in the individual equipment getting damaged or lead to a whole local area network (LAN) paralysis. The Tenda TEF11 series switches have a professional lightning protection design – up to 6kV surge protection, with two levels of protection design respectively, effectively preventing the power of lightning from damaging the cable, which is the equivalent to giving the entire network system a security fence. The test standard is much higher than the national CCC request. In thunderstorm weather, it can also provide monitoring network stability, reliable service and maintain the images transmission.

Outstanding PoE Power Supply

Ports 1-8 support IEEE 802.3at and IEEE 802.3af PoE standard. It provides a maximum power supply of 30W to each port and 58W to the whole device.

Additional Features:
6KV Lighting protection
IEEE 802.3af/at
250m Transmission

Born for Small and Medium-sized HD IP Surveillance Projects



6kV lightning Protection

VLAN Button

Transmission Distance
up to 250m  

Large Packet Buffer

102W High Power   Transmission Distance up to 250m

With the extension technology,data can be transmitted through 250 meters cable which would be a cost-effective replacement for extenders and optical fibers.

Excellent Lightning Protection

The switch supports 6 kV lightning protection for uplink port, protecting the switch from thunderstorms and making it more stable.

Simple Port VLAN Setup

With VLAN Mode on, ports 1 to 8 are isolated from each other, enabling the switch to isolate broadcast storm, improving LAN security and data transmission.

Enjoy Super HD Video Screen

Equipped with 1024KB large packet buffer, it ensures smooth streaming even when eight HD IP cameras of 500W are working simultaneously.

Integrated with Smart Power Management Chip Makes the Switch Get Rid of Overload

It includes chips with smart power management function and integrated professional chip control algorithm, which can accurately calculate the output power. When the power of the receiving equipment exceeds the rated power (92W) of the PoE switch, the low priority port will automatically power off to avoid the over-run of the equipment and prolong the service life of the equipment.

Outstanding PoE Power Supply

Ports 1-8 support IEEE 802.3at and IEEE 802.3af PoE standard. It provides 30W maximum PoE output a single port and 92W the whole device.

The TEF1110P-8-102W has network extension technology. Based on the original twisted pair, it can support up to 250 meters long distance transmission, breaking the hundred meters transfer limit. With 6KV lightning protection, it is the real monitoring private switch. Ports 1-8 support IEEE 802.3at and IEEE 802.3af PoE standard. It provides a maximum power supply of 30W to each port and 99W to the whole device. Meanwhile, it provides dual gigabit uplink port to meet the needs of more equipment cascading and access.

TEF1110P-8-102W 8-Port10/100Mbps+2 Gigabit Desktop Switch With 8-Port PoE
6KV Port Lightning Protection | long distance transmission
Maximum PoE Output Power 99W | PoE power up to 30W for each PoE port
PoE+ and Dual Gigabit Uplink

Ports 1-8 support IEEE 802.3at and IEEE 802.3af PoE standard. Machine PoE maximum output power of 99W, single-port maximum output power of 30W. The two gigabit uplink ports are capable for cascade connection of more devices.

Up to 250 meters long distance transmission, beyond hundred meters transfer limit

Due to the complex monitoring environment, when making cabling and networking, it’s very often to encounter the problem of inadequate network transmission distance. The distance of each camera terminal to the monitoring centre is different, some only a few meters, some hundred metres, while others can be kilometres away.

The Tenda TEF11 series PoE monitoring switches exclusive patent network extension technology, uses the common existing twisted pair, can support 250 metres data transmission, breaks the existing twisted pair hundred metres transmission limit; Provides a gigabit linked SFP port and can meet the demand of transmission up to 250 metres.

6KV lighting protection PoE switch is the real monitoring private switch

For surveillance projects, cameras are often installed in an outdoor environment or a higher position, which also increases the camera and PoE switches probability of a lightning shock. This could result in the individual equipment getting damaged or lead to a whole local area network (LAN) paralysis.

The Tenda TEF11 series switches have a professional lightning protection design – up to 6kV surge protection, with two levels of protection design respectively, effectively preventing the power of lightning from damaging the cable, which is the equivalent to giving the entire network system a security fence. The test standard is much higher than the national CCC request. In thunderstorm weather, it can also provide monitoring network stability, reliable service and maintain the images transmission.

Additional Features:
6KV lightning protection
VLAN
IEEE 802.3af/at
250m transmission

The Tenda TEF1210P switch supports 8 PoE ports, which can supply power to most powered devices through 8-core Ethernet cable and the total PoE power can be up to 123W while each PoE port can support the maximum of 40W.

Lead security transmission power supply to a new height
TEF1210P-8-150W 8FE+2GE+2SFP(Combo) Web Smart PoE Switch
6000V Port Lightning Protection
long distance transmission 
Maximum PoE Output Power 230W
PoE power up to 40W for each PoE port
6KV lighting protection PoE switch is the real monitoring private switch

For surveillance projects, cameras are often installed in an outdoor environment or a higher position, which also increases the camera and PoE switches probability of a lightning shock. This could result in the individual equipment getting damaged or lead to a whole local area network (LAN) paralysis.

The Tenda TEF12 series switches have a professional lightning protection design – up to 6kV surge protection, with two levels of protection design respectively, effectively preventing the power of lightning from damaging the cable, which is the equivalent to giving the entire network system a security fence. The test standard is much higher than the national CCC request. In thunderstorm weather, it can also provide monitoring network stability, reliable service and maintain the images transmission.

Up to 250 meters long distance transmission beyond hundred meters transfer limit

Due to the complex monitoring environment, when making cabling and networking, it’s very often to encounter the problem of inadequate network transmission distance.

The distance of each camera terminal to the monitoring centre is different, some only a few meters, some hundred metres, while others can be kilometres away. The Tenda TEF12 series PoE monitoring switches exclusive patent network extension technology, uses the common existing twisted pair, can support 250 metres data transmission, breaks the existing twisted pair hundred metres transmission limit; Provides a gigabit linked SFP port and can meet the demand of transmission up to 250 metres.

The total PoE power is 123W, 8 port full load power supply is enough

The unit’s total PoE power is 123W. It can provide 8 ports of full PoE power supply; One Port PoE supply is 40W, the unit’s PoE power can meet the full requirements of a network. With an eight core power supply design the network power consumption is reduced to half, highly reducing the power loss over the inferior cable, making sure the camera gets electricity and stability.

Main Features Intelligent PoE Management. When the power supply exceeds the limit, PoE ports intelligently manage the power supply, which extends the switch lifetime.
Up to 300 m Long Range PoE Transmission. The distance between IPCs and switch can reach maximum 300 meters.
4/8-Core Adaptive Power Supply with Less Power Loss. 8-core power supply reduces the power loss on cables.
6KV Surge Protection to Improve Reliability in Harsh Environment. The built-in surge protection device protects the switch from the sudden lightning surge in harsh environment.
Design for Video Transmission. VIP port ensures important data transmission when network congestion occurs.

8 Port Fast Ethernet Smart POE Switch

Smart managed switches are developed by Hikvision, featuring in easy management and maintenance. You can easily deploy, monitor and expand your surveillance system anytime and anywhere with our software platforms. You can view the network topology, monitor the health of the network and receive device alarms in real time, which greatly reduces the cost of network operation and maintenance.




Key Features • 8 × 100 Mbps PoE RJ45 ports, 1 × gigabit network RJ45 port.

• IEEE 802.3at/af standard for PoE ports.

• Network topology management, alarm push, network health monitor.

• 6 KV surge protection for PoE ports.

• Up to 300 m long-range transmission.

• AF/AT camera can reach up to 300 m in extend mode.






 



Full specification and details can be found in the Product Datasheet PDF file

A user quick start guide can be found in the User guide PDF file

A user manual can be found in the User Manual PDF file

8 Port Fast Ethernet Smart POE Switch

Smart managed switches are developed by Hikvision, featuring in easy management and maintenance. You can easily deploy, monitor and expand your surveillance system anytime and anywhere with our software platforms. You can view the network topology, monitor the health of the network and receive device alarms in real time, which greatly reduces the cost of network operation and maintenance.




Key Features • 8 × 100 Mbps PoE RJ45 port, 2 × gigabit combo.

• IEEE 802.3at/af standard for PoE ports.

• Network topology management, alarm push, network health monitor.

• 6 KV surge protection for PoE ports.

• AF/AT camera can reach up to 300 m in extend mode.






 



Full specification and details can be found in the Product Datasheet PDF file

A user quick start guide can be found in the User guide PDF file

A user manual can be found in the User Manual PDF file

8 Port Fast Ethernet Unmanaged POE Switch

DS-3E0310HP-E switches are layer 2 100 Mbps long-range PoE switches, providing 1 × 10/100 Mbps Hi-PoE port, 7 × 10/100 Mbps PoE ports, and 2 × 10/100/1000 Mbps RJ45 ports. The switches provide advanced Hi-PoE/PoE technology and supports extend mode with long-range access up to 300 m. Meanwhile, the 2 × 10/100/1000 Mbps RJ45 uplink ports guarantee applications of multiple network solutions.




Feature and Function • Intelligent PoE Management.

-When the power supply exceeds the limit, PoE ports intelligently manage the power supply, which extends the switch lifetime.

• Up to 300 m Long Range PoE Transmission.

-The distance between IPCs and switch can reach maximum 300 meters.

• IEEE 802.3bt Standard Hi-PoE, Max. 90 W for One Port.

-IEEE 802.3bt standard Hi-PoE port provides max. 90 W power supply for high power devices such as domes or other 802.3bt devices.

• 4/8-Core Adaptive Power Supply with Less Power Loss.

-8-core power supply reduces the power loss on cables.

• 6KV Surge Protection to Improve Reliability in Harsh Environment.

-The built-in surge protection device protects the switch from the sudden lightning surge in harsh environment.






 



Full specification and details can be found in the Product Datasheet PDF file

A user quick start guide can be found in the User guide PDF file

8 Port Fast Ethernet Unmanaged Harsh POE Switch

DS-3T0310HP-E/HS switches are layer 2 Hi-PoE switches, providing advanced PoE power supply technology and wider temperature (-30 to 65 °C) design on the basis of high-performance access to ensure stable data upload. The switches support Hi-PoE, long range, port isolation, and PoE watchdog function.




Key Features • 6 × 100M PoE ports, 2 × Hi-PoE port, 1 × gigabit RJ45 port and 1 × gigabit SFP fiber optical port. • IEEE 802.3at/af/bt standard for Hi-PoE ports (Max. 90 W PoE output). • IEEE 802.3at/af standard for PoE ports (Max. 30 W PoE output). • IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z and IEEE 802.3ab standard. • 6 KV surge protection for PoE ports. • PoE output power management. • Up to 300 m long-range transmission. • PoE watchdog to auto detect and restart the cameras that do not respond. • Port isolation to improve network security. • Wider temperature (-30 to 65 °C) access design. • Wire-speed forwarding. • Store-and-forward switching. • Solid high-strength metal shell. • Reliable fan-free design.


Full specification and details can be found in the Product Datasheet PDF file

A user quick start guide can be found in the User guide PDF file