24 Port Cat5e Patch Panels

CE patch panels comply with the current standards for enhanced Category 5e. CE 5e patch panels are designed to minimise deployment time and maximise connection strength. Each panel offers a choice of labelling systems to include both labelling fields with writable surface and separate identification strips are provided to allow further labelling where required.

Comes Complete with:
4 x M6 Cage nuts & bolts for fixing in to a cabinet, coloured black to match the panel itself.
4 x Cable management rings.
5 x 150mm Cable ties to aid cable management
4 x Self adhesive plastic label holders c/w write on paper labels
1 x Sheet of pre printed numbers 1 to 96
1 x Termination instruction sheet
Key features of 24 Port Cat5e Patch Panel - RJ45 UTP Durable lacquered steel front panel.
Conforms to ANSI/EIA/TIA, ISO/IEC11801 and EN50173 Category 5e standard, FCC part 68 requirements.
Gold over Nickel plated jack contacts.
Phosphor Bronze & Nickel plated IDC terminals.
IDC terminals accept 22 to 26AWG solid and stranded wires.




Accessories
(Sold Separately)

Cat5e Patch Leads IDC Punchdown Tool Cat5e Solid Cable Cat5e Modules

This Through Coupler Panel provides 24 RJ45 Cat5e Ports. RJ45 sockets on the rear allow for termination without the need for any tooling.

CE patch panels comply with the current standards for enhanced Category 5e. CE 5e patch panels are designed to minimise deployment time and maximise connection strength.

These panels are tested to confirm to all the current ANSI/TIA/EIA 568 B.2 standards.

Comes Complete with: 4 x M6 Cage nuts & bolts for fixing in to a cabinet, coloured black to match the panel itself.
24 x 80mm Cable ties to aid cable management
Key Features of 24 Port Cat5e Patch Panel -  RJ45 Through Coupler 1u Comes supplied with an attachable rear cable management bar and mounting screws
Supports Gigabit Ethernet
RJ45 Ports front and rear
Through Coupler
Category 5e
Ports numbered 1-24




Accessories
(Sold Separately)

Cat5e Patch Leads Cat5e Modules

The design of this innovative right angled patch panel makes installation simple with the IDC termination blocks at 90 degrees to the panel. With built in cable management to the rear installtions can be kept clean and tidy.

CE patch panels comply with the current standards for enhanced Category 5e. CE 5e patch panels are designed to minimise deployment time and maximise connection strength. Each panel offers a choice of labelling systems to include both labelling fields with writable surface and separate identification strips are provided to allow further labelling where required.

Key Features of 24 Port Cat5e Patch Panel - Right Angled RJ45 UTP: Cable management system built into the rear
Durable lacquered steel front panel.
Conforms to ANSI/EIA/TIA, ISO/IEC11801 and EN50173 Category 5e standard, FCC part 68 requirements.
Gold over Nickel plated jack contacts.
Phosphor Bronze & Nickel plated IDC terminals.
IDC terminals accept 22 to 26AWG solid and stranded wires.




Accessories
(Sold Separately)

Cat5e Patch Leads IDC Punchdown Tool Cat5e Solid Cable Cat5e Modules

The Cat5e UTP 1u 24 port patch panel uses a dual termination punch down block suitable for LSA or 110 tooling. 568B punch down blocks on rear of panel at 180 degrees to the front. Cable management rings at the rear of the patch panel allows routing of the cables to aid airflow.

Key Features of the 24-Port Cat5e UTP 1U Eco Patch Panel (Part No: PAN1E-QTM / 72-3392):Core Specifications

Capacity: 24 RJ45 ports in a 1U rack-mountable form factor.

Performance: Category 5e (Cat5e) compliant, supporting Gigabit Ethernet (1000Base-T) and backward compatible with 10/100Base-T.

Standard Compatibility: Complies with ANSI/TIA-568-A/B and ISO/IEC 11801 standards.

Each port has a provision for individual labelling.

Coloured markings on punch down blocks and rear labels for correct cable termination.

24 Port 1U Excel Category 5e Patch Panels comply with the current standards for enhanced Category 5. Each panel offers a choice of labelling with the option to use the screen printed fields on the panel facia or the slide label system or pre printed 1-96 labelling scheme which is enclosed with each panel. Ease of installation is assured with ample rear cable management positions and LSA IDC blocks. Each panel is available in a choice of colours to allow identification of either applications, departments or services. Cage nuts and mini cable ties are included with each panel.

Key Features of Excel 24 Port Cat5e Patch Panel - 1u RJ45 UTP: Category 5e compliant
Choice of Colours
Supports Gigabit Ethernet
Cage nuts and mini cable ties included
LSA Style Termination Blocks
T568A/B Wiring Configuration
Pre Printed 1-96 Self Adhesive Labelling included
Performance Overview


Excel Category 5e Patch Panels are manufactured to and tested to the current Category 5 enhanced standards as defined by the TIA and ISO standards’ bodies. Swept frequency tests are applied to each critical performance characteristic, such as near end cross talk (NEXT) and far end cross talk (FEXT). Both Worst Case and Power Sum Test methods are applied. Actual performance exceeds the required standard by a considerable margin ensuring sufficient headroom for even the most demanding applications.





Accessories
(Sold Separately)

Cat5e Patch Leads IDC Punchdown Tool Cat5e Solid Cable Cat5e Modules

The Cat6 UTP 1U 24 Port Patch Panel provides reliable network organization and efficient cable management within rack environments. Designed for structured cabling systems, it ensures consistent performance and easy installation.

Key Features of 24 Port Cat6 UTP 1U Eco Patch Panel Dual termination punch down block for LSA or 110 tooling
568B punchdown configuration at 180° to front panel
Integrated cable management rings for organized routing
Individual labeling for each port
Colored termination guides for easy setup
Gold-plated connector contacts for signal reliability
Supplied with tie wraps and management accessories
Compact 1U rack design with durable construction
Dual Termination Compatibility This patch panel includes dual termination punch down blocks that are suitable for both LSA and 110 tooling. The 568B punchdown blocks are positioned at a 180-degree angle to the front, simplifying cable termination and alignment.

Efficient Cable Management Integrated cable management rings at the rear of the panel facilitate neat cable routing and improve airflow within the rack. This helps maintain optimal operating conditions and prevents cable congestion.

Clear Port Identification Each port is designed with individual labeling provisions, allowing for clear and organized identification during setup and maintenance. Colored markings on punch down blocks and rear labels further ensure correct cable termination.

Included Accessories The package comes complete with four rear cable management rings and five tie wraps, offering a straightforward setup process and ensuring cables remain securely fastened.

Technical Specifications Standard: Cat6
Type: U/UTP
Ports: 24
Rack Capacity: 1U
Connector Contacts Plating: Gold
Weight: 0.597 kg
Dimensions (mm): 510 (L) x 50 (W) x 40 (H)

Key Features of Lindy 19in CAT5e 1U RJ45 Unshielded Patch Panel High quality angled terminal block contacts accept 22-26 AWG solid core wire
Dual type terminal blocks (for Krone/110 compatible punchdown tools) and dual T568A/T568B colour coding
Cable tie mounts and cable ties supplied for cable management
Up to 48 port versions also available
Fixing screws, cage nuts and washers supplied separately

Molex PowerCat 5e Patch Panels are designed to provide a simple, orderly and efficient means for connecting horizontal cabling.

The product includes the PowerCat 5e DataGate Jack, which features a spring-loaded shutter that not only protects it from dust and contaminants, but also ejects improperly seated patch cords.

Port identification is provided on the front and back of the panel and individual ports can be color-coded with icon labels, supplied separately. Manufactured from cold-rolled steel for strength and durability and finished in either graphite gray or black.

Key Features & Advantages of Molex PowerCat 1U 24 Port C5e Patch Panel 568A/B Grey Available in 1U 24 Port and 2U 48 Port density
Each port features the patented DataGate Jack with spring-loaded shutter:
prevents incomplete mating
protects from dust and contaminants
Patented IDC V-shaped contacts that flex, not fatigue, when terminated
Features pointed IDC towers to speed termination and enhance cable retention
Dual color-coding allows for 568 A/B wiring configuration
Front and rear port labeling as well as panel identification label
4 x 6 ganged jack configuration
Removable cable management shelf(s) ensure bend radius compliance
Can be terminated using industry standard punchdown tools
Technical Information

Jack Connector

Plastic Housing: Thermoplastic UL94V-0 rated or equivalent
Operating Life: Minimum 750 insertion cycles
Contact Material: Copper Alloy
Contact Plating: 50µ" Gold/100µ" Nickel
Contact Force: 100g minimum
Plug Retention Force: 11 lbf minimum
IDC Connector

Plastic Housing: Thermoplastic UL94V-0 rated or equivalent
Operating Life: Minimum 20 reterminations
Contact Material: Copper Alloy
IDC Contact Plating: Tin/Lead Plate
Wire Accommodation: 22-24 AWG solid

24 Port 1U Excel Category 5e Through Coupler Patch Panels offers RJ45 to RJ45 jack connectivity between the front and rear of the patch panel. The patch panel is ideal for providing a cross connect for network equipment with the simple fitting of patch cords rather than switch link looms. Each panel has the port number screen printed below the port with an area to add the port identification above. The design lends itself for the easy application of a bespoke engraved label above and below the ports to suit the installation requirement. 

Key Features of Excel 24 Port Cat5e Patch Panel - 1u RJ45 Through Coupler:

Category 5e compliant
Through Coupler
Supports Gigabit Ethernet
RJ45 Ports Front & Rear
Pre Printed 1-96 Self Adhesive Labelling included
Performance Overview

Excel Category 5e Data Outlets are manufactured and tested to the current Category 5 enhanced standards as defined by the TIA and ISO standards’ bodies. Swept frequency tests are applied to each critical performance characteristic, such as near end cross talk (NEXT) and far end cross talk (FEXT). Both Worst Case and Power Sum Test methods are applied. Actual performance exceeds the required standard by a considerable margin ensuring sufficient headroom for even the most demanding applications.



Accessories
(Sold Separately)

Cat5e Patch Leads Cat5e Modules

Excel Cat5e Contractor Pack (1x 24 Port Unscreened Patch Panel 12x Dual Faceplates 1x Cable Manager) Includes the following:

1 x Excel 24 Way Cat5e Patch Panel 
1 x 4 Ring Cable Tidy Bar
12 x Cat5e Excel Two modules in a single gang faceplate
Excel Patch Panel 24 Port 1U Excel Category 5e Patch Panels (PAN1) comply with the current standards for enhanced Category 5. Each panel offers a choice of labelling with the option to use the screen printed fields on the panel facia or the slide label system or pre printed 1-96 labelling scheme which is enclosed with each panel. Ease of installation is assured with ample rear cable management positions and LSA IDC blocks. Cage nuts and mini cable ties are included with each panel.

Excel Pre Loaded Single Gang Faceplates Excel Pre Loaded Single Gang Faceplates consist of two single modules (MOD1) and an Excel bevelled faceplate (SFPB). These plates save time and money by reducing on site installation and assembly time.

Features Category 5e
Fits 27 mm back box when used with bevelled faceplate
Built in slide label system
4 Ring Cable Tidy Bar

19" Horizontal Cable Management bars to aid neat running of cables within Data Cabinets