Riello Single Phase UPS Accessories

Riello SDU PAR Parallel Board for Sentinal Dual (SDU).

13A UK Plug to 16A C19 Commando

Universal rackmount rails for VSD and SDH range only. Suitable for 600-1000mm deep racks. Recommended one Rack Guide per UPS/Battery Box.

Suitable for the SDL Range, Universal Rack Guides for Racks 600-1000mm Deep

MultiCom 362 is a slot-in serial interface card providing Riello UPS sytems with an RS232 serial interface or USB port. The USB port allows the Riello UPS to communicate with Apple Mac, Windows and Linux PCs and operating systems.

The MultiCOM 372 allows an additional communication port to be added to the UPS to control and monitor the UPS via the RS232 serial line. The board is supplied with an ESD (UPS Emergency Shutdown) input and an RSD (Remote Shutdown) input, both available on a removable terminal board and directly connectible to emergency buttons or other buttons.

Features:
Management of ESD input and UPS Shutdown
Ability to supply devices at 12 V 80 mA max

Contacts / EPO board MultiCOM 382 provides a set of relay contacts to provide UPS alarm and status indication.
The contacts are connected through terminal connections. Signal contacts include Emergency Power Off (EPO), Remote Shut Down (RSD), On Battery, On Bypass, Alarm and Low battery. The contacts are change over or normally open.

The MultiCOM 351/352 serial duplicator is an accessory that allows two devices to be connected to a single communication serial port on the UPS. It can be used anywhere where several serial connections are required for multiple polling of the UPS. It is ideal for LAN networks with firewalls, where a high level of security is required, or for the management of separate LAN networks supplied by a single UPS.

Features
Cascading configuration giving a maximum of 4 serial communication ports
LED communication flow indicator
Firmware upgradeable via serial port.

The MultiCOM 351/352 serial duplicator is an accessory that allows two devices to be connected to a single communication serial port on the UPS. It can be used anywhere where several serial connections are required for multiple polling of the UPS. It is ideal for LAN networks with firewalls, where a high level of security is required, or for the management of separate LAN networks supplied by a single UPS.

Features
Cascading configuration giving a maximum of 4 serial communication ports
LED communication flow indicator
Firmware upgradeable via serial port.

Overview MultiCOM 384 provides a set of relay contacts to provide UPS alarm and status indication.

The contacts are connected through terminal connections. Signal contacts include Emergency Power Off (EPO), Remote Shut Down (RSD), On Battery, On Bypass, Alarm and Battery low warnings with potential free contacts on normally close or normally open contacts.intenance.



Characteristics Max. current 3 A at 250 Vac
Signal-contact customisation
Normally Open or Normally Close configuration for each contact

The NetMan 204 network agent allows UPS directly connected over LAN 10/100 Mb connections to be managed using the main network communication protocols (TCP /IP , HTTP HTTPS, SSH, SNMPv1, SNMPv2 and SNMPv3).

It is the ideal solution for the integration of UPS over Ethernet networks with Modbus/TCP and BACnet/IP protocols. It was developed to integrate UPS into medium-sized and large networks, to provide a high level of reliability in communication between the UPS and associated management systems.

Features and benefits
32bit RISC processor
Compatible with 10/100 Mbps Ethernet and IP v4/6 networks
Compatible with PowerShield³ and TeleNetGuard
SNMP v1, v2 and v3 with RFC1628 for PowerNetGuard and NMS connection
SNMP v1 with RFC3433 for the management of environmental sensors
HTTP and HTTPS for UPS control via web browser
SMTP for alarm notifications and UPS status updates via email
Modbus/TCP
BACnet/IP
Maximum expandability
WiFi ready, using a customized dongle can communicate via WiFi network
Events log and data management
Wake-on-LAN management for starting computers via TCP /IP network
Other standards: DHCP, DNS, FTP, NTP , ICMP , IGMP
Management of environmental sensors
Configurable via SSH sessions and HTTP
Firmware upgradeable via FTP and HTTP.
Technical Specifications
Relative humidity: 90%
Weight: 0.3kg
Dimensions (H / W / D): 40mm x 60mm x 120mm

Riello MultiCOM 392 UPS alarm and status indication, (Multi Sentry Only).

Overview Intuitive and easy to use, PowerNetGuard is a perfect UPS management tool for data centres and IT managers overseeing medium-to-large networks.

Compatible with all main operating systems (i.e. Microsoft, Linux, Mac, Solaris) and highly-secure with multi-level access for various users. Also suitable for use with UPS made by other manufacturers.

Highlights RFC1628 standard ensures consistent network-wide UPS management
Displays and logs key operational data including voltage, load, and battery charge
Sends automated alarm notifications via email or SMS
Multi-user access with a variety of security levels
Compatible with UPS made by 3rd party manufacturers
Powerful But User-Friendly Interface Software provides a simple but powerful graphical illustration of events and operating data needed to carry out first-level diagnostics. Automatically sends SMS and email notifications to key responders if any UPS alarms are triggered.

Simplified UPS Management PowerNetGuard allows you to manage all the UPS in your infrastructure using a single application. This ensures you can monitor and manage efficiently, meaning you’ll get prompt warnings of any faults or malfunctions.

Supports Third Party UPS Allows you to manage UPSs from other manufacturers via SNMP using their own network boards. This enables you to centralise the management of a sizeable UPS fleet into a single system without needing to use a range of differing applications.

Riello PARALLEL KIT S3M/S3T Parallel kit, for Sentryum S3M & S3T.

Riello BATTERY KIT S3M/S3T CPT Battery installation kit, for Sentryum S3M/S3T Compact (excludes batteries).

Riello BATTERY KIT S3M/S3T ACT Battery installation kit, for Sentryum S3M/S3T Active (excludes batteries).

Riello BATTERY KIT S3M/S3T XTD Battery installation kit, for Sentryum S3M/S3T Xtend (excludes batteries).

Riello DI KIT S3M 10-20KVA ACT dual input conversion kit, to suit S3M Active 10-20kVA.

Riello DI KIT S3T 10-20KVA ACT dual input conversion kit, to suit S3T Active 10-20kVA.

Riello ER KIT S3 10KVA CPT/ACT/XTD 12A Battery Charger Kit, for all Sentryum 10kVA models (CPT, ACT and XTD).

Riello ERKITS3 15-20KVA CPT/ACT/XTD 20A Battery Charger Kit, for all Sentryum 15-20kVA models (CPT, ACT and XTD).

Riello IP X1 KIT S3M/S3T XTD On-site IP X1 upgrade kit, for Sentryum S3M/S3T Xtend models.

Riello DOOR FILTER KIT S3M/S3T XTD Replacement Front Door, with air filter kit for Sentryum S3M/S3T Xtend.

Riello MPT PAR Parallel Cards for Master Plus Range.