Mellanox Passive Copper Hybrid Cables

10GbE QSFP+ to SFP+ DAC Adapter Cable

Mellanox’s QSFP to SFP+ passive DAC adapter cables are compliant with SFF-8431 and SFF-8436 specifications and provide connectivity between devices using QSFP port on one end to an SFP+ port on the other end. The cables use state-of-the-art signal processing technology to fill the expanding need for cost-effective data center interconnects.

Mellanox’s unique, quality, passive copper cable solutions provide a power-efficient replacement for active power connectivity, such as fiber optic cables. Optimizing systems to operate with QSFP to SFP+ passive copper splitter cables significantly reduces power consumption and enlarges the connectivity opportunities of the system.

Rigorous cable production testing ensures the best out-of-the-box installation experience, performance and durability.




Highlights • Compliant to industry standards

• InfiniBand Architecture specification (QSFP MSA SFF-8436 & SFP+ MSA SFF-8431)

• BER better than 1E-15

• Low crosstalk

• Low insertion loss

• Matched impedance

• Secure latching mechanism

• RoHS-5 compliant


Full specification and details can be found in the Product Datasheet PDF file

100GbE to 4x25GbE (QSFP28 to 4xSFP28) 30 AWG CA-N Direct Attach Copper Splitter Cable

Mellanox Networking DAC splitter breakout cables are a high speed, cost-effective 100GbE to 4x25GbE Ethernet connectivity solution, designed to meet the growing needs for higher bandwidth in data centers.

MCP7F00-A0xxRyyz cables are compliant with SFF-8402 SFP28 and SFF-8665 QSFP28 standard specifications and provide connectivity between system units with a QSFP28 port on one side and up to four different SFP28 ports on the other. The cable connects data signals from each of the 4 copper pairs on the QSFP28 end to the single pair of each of the SFP28 ends. Each QSFP28/SFP28 port comprises an EEPROM providing product information, which can be read by the host system.




Highlights • 100GbE to 4x25GbE data rate

• 40GbE to 4x10GbE data rate

• SFF-8402 SFP28 compliant

• SFF-8665 QSFP28 compliant

• Operating case temperature 0-70C

• Single 3.3V supply voltage

• Bit Error Rate (BER) better than 1E-15

• Hot pluggable

• RoHS compliant

• LSZH (Low Smoke Zero Halogen) jacket

• LF (Lead Free) HF (Halogen Free) PCB

• SFF-8636 compliant I2C management interface


MCP7F00-A0xxRyyz cables up to 2m support IEEE 802.3by CA-25G-N (Cable Assembly No-FEC) with low latency. Cables from 3m to 5m support IEEE 802.by CA-25G-L (Cable Assembly Long) with RS-FEC (Reed Solomon Forward Error Correction) enabled. For 2.5m and 3m cables there are two versions supporting either CA-25G-N or CA-25G-L.

Mellanox's unique quality passive copper cable solutions provide power-efficient connectivity for short distance interconnects. They enable higher port bandwidth, density and configurability at a low cost and reduced power requirement in the data centers.

Rigorous cable production testing ensures best out-of-the-box installation experience, performance and durability.





Product Diagram:

 



Full specification and details can be found in the Product Datasheet PDF file

100GbE to 2x50GbE (QSFP28 to 2xQSFP28) Direct Attach Copper Splitter Cable

Mellanox Networking passive splitter breakout cable is a high speed, cost-effective, 100GbE to 2x50GbE, Ethernet connectivity solution designed to meet the growing needs for higher bandwidth in data centers.

Mellanox cables are compliant with SFF-8665 QSFP28 specifications and provide connectivity between systems using a QSFP28 port one side and two QSFP28 ports on the other. MCP7H00 connects the data signals from each of the 2 dual copper pairs on the single QSFP28 (pairs 1&2, 3&4) end to the dual copper pair of each of the QSFP28 (pair 1&2) ends on the multiport side. Each QSFP28 cage comprises an EEPROM providing product information, which can be read by the host system.




Highlights • 100GbE to 2x50GbE data rate

• SFF-8665 compliant QSFP28

• Operating case temperature 0-70C

• Single 3.3V supply voltage

• Bit Error Rate (BER) better than 1E-15

• Hot pluggable

• RoHS compliant

• LSZH (Low Smoke Zero Halogen) jacket

• LF (Lead Free) HF (Halogen Free) PCB

• SFF-8636 compliant I2C management interface


Mellanox's unique, quality, passive copper cable solutions provide power-efficient connectivity for short distance interconnects. They enable higher port bandwidth, density and configurability at a low cost and reduced power requirement in the data centers.

Rigorous cable production testing ensures best out-of-the-box installation experience, performance and durability.




Product Diagram:

 



Full specification and details can be found in the Product Datasheet PDF file

100GbE to 4x25GbE (QSFP28 to 4xSFP28) 30AWG CA-L Direct Attach Copper Splitter Cable

MellanoxNetworking DAC splitter breakout cables are a high speed, cost-effective 100GbE to 4x25GbE Ethernet connectivity solution, designed to meet the growing needs for higher bandwidth in data centers.

MCP7F00-A0xxRyyz cables are compliant with SFF-8402 SFP28 and SFF-8665 QSFP28 standard specifications and provide connectivity between system units with a QSFP28 port on one side and up to four different SFP28 ports on the other. The cable connects data signals from each of the 4 copper pairs on the QSFP28 end to the single pair of each of the SFP28 ends. Each QSFP28/SFP28 port comprises an EEPROM providing product information, which can be read by the host system.




Highlights • 100GbE to 4x25GbE data rate

• 40GbE to 4x10GbE data rate

• SFF-8402 SFP28 compliant

• SFF-8665 QSFP28 compliant

• Operating case temperature 0-70C

• Single 3.3V supply voltage

• Bit Error Rate (BER) better than 1E-15

• Hot pluggable

• RoHS compliant

• LSZH (Low Smoke Zero Halogen) jacket

• LF (Lead Free) HF (Halogen Free) PCB

• SFF-8636 compliant I2C management interface


MCP7F00-A0xxRyyz cables up to 2m support IEEE 802.3by CA-25G-N (Cable Assembly No-FEC) with low latency. Cables from 3m to 5m support IEEE 802.by CA-25G-L (Cable Assembly Long) with RS-FEC (Reed Solomon Forward Error Correction) enabled. For 2.5m and 3m cables there are two versions supporting either CA-25G-N or CA-25G-L.

Mellanox's unique quality passive copper cable solutions provide power-efficient connectivity for short distance interconnects. They enable higher port bandwidth, density and configurability at a low cost and reduced power requirement in the data centers.

Rigorous cable production testing ensures best out-of-the-box installation experience, performance and durability.





Product Diagram:

 



Full specification and details can be found in the Product Datasheet PDF file

100GbE to 2x50GbE (QSFP28 to 2xQSFP28) Direct Attach Copper Splitter Cable

Mellanox Networking passive splitter breakout cable is a high speed, cost-effective, 100GbE to 2x50GbE, Ethernet connectivity solution designed to meet the growing needs for higher bandwidth in data centers.

MCP7H00 cables are compliant with SFF-8665 QSFP28 specifications and provide connectivity between systems using a QSFP28 port one side and two QSFP28 ports on the other. MCP7H00 connects the data signals from each of the 2 dual copper pairs on the single QSFP28 (pairs 1&2, 3&4) end to the dual copper pair of each of the QSFP28 (pair 1&2) ends on the multiport side. Each QSFP28 cage comprises an EEPROM providing product information, which can be read by the host system.




Highlights • 100GbE to 2x50GbE data rate

• SFF-8665 compliant QSFP28

• Operating case temperature 0-70C

• Single 3.3V supply voltage

• Bit Error Rate (BER) better than 1E-15

• Hot pluggable

• RoHS compliant

• LSZH (Low Smoke Zero Halogen) jacket

• LF (Lead Free) HF (Halogen Free) PCB

• SFF-8636 compliant I2C management interface


Mellanox's unique, quality, passive copper cable solutions provide power-efficient connectivity for short distance interconnects. They enable higher port bandwidth, density and configurability at a low cost and reduced power requirement in the data centers.

Rigorous cable production testing ensures best out-of-the-box installation experience, performance and durability.




Product Diagram:

 



Full specification and details can be found in the Product Datasheet PDF file

100GbE to 4x25GbE (QSFP28 to 4xSFP28) 26AWG CA-N Direct Attach Copper Splitter Cable

Mellanox Networking DAC splitter breakout cables are a high speed, cost-effective 100GbE to 4x25GbE Ethernet connectivity solution, designed to meet the growing needs for higher bandwidth in data centers.

MCP7F00-A0xxRyyz cables are compliant with SFF-8402 SFP28 and SFF-8665 QSFP28 standard specifications and provide connectivity between system units with a QSFP28 port on one side and up to four different SFP28 ports on the other. The cable connects data signals from each of the 4 copper pairs on the QSFP28 end to the single pair of each of the SFP28 ends. Each QSFP28/SFP28 port comprises an EEPROM providing product information, which can be read by the host system.




Highlights • 100GbE to 4x25GbE data rate

• 40GbE to 4x10GbE data rate

• SFF-8402 SFP28 compliant

• SFF-8665 QSFP28 compliant

• Operating case temperature 0-70C

• Single 3.3V supply voltage

• Bit Error Rate (BER) better than 1E-15

• Hot pluggable

• RoHS compliant

• LSZH (Low Smoke Zero Halogen) jacket

• LF (Lead Free) HF (Halogen Free) PCB

• SFF-8636 compliant I2C management interface


MCP7F00-A0xxRyyz cables up to 2m support IEEE 802.3by CA-25G-N (Cable Assembly No-FEC) with low latency. Cables from 3m to 5m support IEEE 802.by CA-25G-L (Cable Assembly Long) with RS-FEC (Reed Solomon Forward Error Correction) enabled. For 2.5m and 3m cables there are two versions supporting either CA-25G-N or CA-25G-L.

Mellanox's unique quality passive copper cable solutions provide power-efficient connectivity for short distance interconnects. They enable higher port bandwidth, density and configurability at a low cost and reduced power requirement in the data centers.

Rigorous cable production testing ensures best out-of-the-box installation experience, performance and durability.





Product Diagram:

 



Full specification and details can be found in the Product Datasheet PDF file

100GbE to 2x50GbE (QSFP28 to 2xQSFP28) Direct Attach Copper Splitter Cable

100GbE to 2x50GbE QSFP28 to 2xQSFP28 Direct Attach Copper Splitter Cable

Mellanox Networking passive splitter breakout cable is a high speed, cost-effective, 100GbE to 2x50GbE, Ethernet connectivity solution designed to meet the growing needs for higher bandwidth in data centers.

MCP7H00 cables are compliant with SFF-8665 QSFP28 specifications and provide connectivity between systems using a QSFP28 port one side and two QSFP28 ports on the other. MCP7H00 connects the data signals from each of the 2 dual copper pairs on the single QSFP28 (pairs 1&2, 3&4) end to the dual copper pair of each of the QSFP28 (pair 1&2) ends on the multiport side. Each QSFP28 cage comprises an EEPROM providing product information, which can be read by the host system.




Highlights • 100GbE to 2x50GbE data rate

• SFF-8665 compliant QSFP28

• Operating case temperature 0-70C

• Single 3.3V supply voltage

• Bit Error Rate (BER) better than 1E-15

• Hot pluggable

• RoHS compliant

• LSZH (Low Smoke Zero Halogen) jacket

• LF (Lead Free) HF (Halogen Free) PCB

• SFF-8636 compliant I2C management interface


Mellanox’s unique, quality, passive copper cable solutions provide power-efficient connectivity for short distance interconnects. They enable higher port bandwidth, density and configurability at a low cost and reduced power requirement in the data centers.

Rigorous cable production testing ensures best out-of-the-box installation experience, performance and durability.




Product Diagram:

 




Full specification and details can be found in the Product Datasheet PDF file

40GbE to 4x10GbE (QSFP+ to 4xSFP+) Direct Attach Copper Splitter Cable

Mellanox’s QSFP+ to 4x SFP+ passive, copper, splitter cables are 40GbE to 10GbE cable assemblies. The cables are compliant with SFF-8418/8419 and SFF-8685/8436 specifications and provide connectivity between devices using QSFP+ port on one end and four SFP+ ports on the other end.

Mellanox’s unique, quality, passive, copper, cable solutions provide power-efficient replacement for active power connectivity such as fiber optic cables. Rigorous cable production testing ensures best out-of-the-box installation experience, performance and durability




Highlights • 40GbE to 4x10GbE data rate

• SFF-8685/8436 compliant

• Operating case temperature of 0-70C

• 3.3V power supply

• BER better than 1E-15

• Hot pluggable

• RoHS compliant

• SFF-8431/8432 compliant H


Full specification and details can be found in the Product Datasheet PDF file

HDR 200Gb/s QSFP56 Direct Attach Copper Cable

Mellanox DAC cables are high speed, cost-effective alternatives to fiber optics in 200Gb/s InfiniBand HDR applications.

Mellanox Networking QSFP56 passive copper cable contains eight high-speed copper pairs, each operating at data rates of up to 50Gb/s. Each QSFP56 port comprises an EEPROM providing product information, which can be read by the host system.




Highlights • IBTA InfiniBand HDR compliant

• Up to 200Gb/s data rate

• 4x 50Gb/s PAM4 modulation

• SFF-8665 compliant

• Operating case temperature 0-70C

• Single 3.3V supply voltage

• Bit Error Rate (BER) better than 1E-15 with InfiniBand HDR systems

• Hot pluggable

• RoHS compliant

• LSZH (Low Smoke Zero Halogen) jacket

• LF (Lead Free) HF (Halogen Free) PCB

• SFF-8636 compliant I2C management interface


Mellanox's unique quality passive copper cable solutions provide power-efficient connectivity for short distance interconnects. It enables higher port bandwidth, density and configurability at a low cost and reduced power requirement in the data centers.

Rigorous cable production testing ensures best out-of-the-box installation experience, performance and durability.





Product Diagram:

 



Full specification and details can be found in the Product Datasheet PDF file

100GbE to 4x25GbE (QSFP28 to 4xSFP28) 26AWG CA-L Direct Attach Copper Splitter Cable

MellanoxNetworking DAC splitter breakout cables are a high speed, cost-effective 100GbE to 4x25GbE Ethernet connectivity solution, designed to meet the growing needs for higher bandwidth in data centers.

MCP7F00-A0xxRyyz cables are compliant with SFF-8402 SFP28 and SFF-8665 QSFP28 standard specifications and provide connectivity between system units with a QSFP28 port on one side and up to four different SFP28 ports on the other. The cable connects data signals from each of the 4 copper pairs on the QSFP28 end to the single pair of each of the SFP28 ends. Each QSFP28/SFP28 port comprises an EEPROM providing product information, which can be read by the host system.




Highlights • 100GbE to 4x25GbE data rate

• 40GbE to 4x10GbE data rate

• SFF-8402 SFP28 compliant

• SFF-8665 QSFP28 compliant

• Operating case temperature 0-70C

• Single 3.3V supply voltage

• Bit Error Rate (BER) better than 1E-15

• Hot pluggable

• RoHS compliant

• LSZH (Low Smoke Zero Halogen) jacket

• LF (Lead Free) HF (Halogen Free) PCB

• SFF-8636 compliant I2C management interface


MCP7F00-A0xxRyyz cables up to 2m support IEEE 802.3by CA-25G-N (Cable Assembly No-FEC) with low latency. Cables from 3m to 5m support IEEE 802.by CA-25G-L (Cable Assembly Long) with RS-FEC (Reed Solomon Forward Error Correction) enabled. For 2.5m and 3m cables there are two versions supporting either CA-25G-N or CA-25G-L.

Mellanox's unique quality passive copper cable solutions provide power-efficient connectivity for short distance interconnects. They enable higher port bandwidth, density and configurability at a low cost and reduced power requirement in the data centers.

Rigorous cable production testing ensures best out-of-the-box installation experience, performance and durability.





Product Diagram:

 



Full specification and details can be found in the Product Datasheet PDF file

200GbE to 2x100GbE (QSFP56 to 2xQSFP56) Direct Attach Copper Splitter Cable

Networking passive DAC breakout cables provide robust connections for leading-edge InfiniBand HDR 200Gb/s systems. These cables provide 200Gb/s connectivity between devices using QSFP56 ports.

LinkX 200Gb/s passive DAC cables fill the need for short cost-effective connectivity in the data center. Passive copper cables require no additional power to ensure quality connectivity. Mellanox's high-quality solutions provide a power-efficient replacement for active power connectivity such as fiber optic cables for short distances.




Highlights • 200GbE to 2x100GbE splitter

• Compliant with SFF-8665

• Up to 200Gb/s data rate

• 4x50G PAM4 modulation

• Ultra low crosstalk for improved performance

• Low insertion loss

• Tested in an end-to-end system

• RoHS compliant

• Halogen free

• Operating case temperature of 0-70C


Optimizing systems to operate with LinkX 200Gb/s passive DAC cables significantly reduces power consumption and EMI emission.

Rigorous cable production testing ensures best out-of-the-box installation experience, performance and durability.


Full specification and details can be found in the Product Datasheet PDF file

200GbE to 2x100GbE (QSFP56 to 2xQSFP56) Direct Attach Copper Splitter Cable

200Gb/s HDR to 2x100Gb/s HDR100 QSFP56 to 2xQSFP56 Direct Attach Copper Splitter Cable

Mellanox Networking passive DAC breakout cables provide robust connections for leading-edge InfiniBand HDR 200Gb/s systems. These cables provide 200Gb/s connectivity between devices using QSFP56 ports.

LinkX 200Gb/s passive DAC cables fill the need for short cost-effective connectivity in the data center. Passive copper cables require no additional power to ensure quality connectivity. NVIDIA's high-quality solutions provide a power-efficient replacement for active power connectivity such as fiber optic cables for short distances.




Highlights • 200GbE to 2x100GbE splitter

• Compliant with SFF-8665

• Up to 200Gb/s data rate

• 4x50G PAM4 modulation

• Ultra low crosstalk for improved performance

• Low insertion loss

• Tested in an end-to-end system

• RoHS compliant

• Halogen free

• Operating case temperature of 0-70C


Mellanox’s unique quality passive copper cable solutions provide power-efficient connectivity for short distance interconnects. It enables higher port bandwidth, density and configurability at a low cost and reduced power requirement in the data centers.

Optimizing systems to operate with LinkX 200Gb/s passive DAC cables significantly reduces power consumption and EMI emission.

Rigorous cable production testing ensures best out-of-the-box installation experience, performance and durability.


Full specification and details can be found in the Product Datasheet PDF file

200Gb/s HDR to 2x100Gb/s HDR100 (QSFP56 to 2xQSFP56) Direct Attach Copper Splitter Cable

200Gb/s HDR to 2x100Gb/s HDR100 QSFP56 to 2xQSFP56 Direct Attach Copper Splitter Cable

Mellanox Networking passive DAC breakout cables provide robust connections for leading-edge InfiniBand HDR 200Gb/s systems. These cables provide 200Gb/s connectivity between devices using QSFP56 ports.

LinkX 200Gb/s passive DAC cables fill the need for short cost-effective connectivity in the data center. Passive copper cables require no additional power to ensure quality connectivity. NVIDIA's high-quality solutions provide a power-efficient replacement for active power connectivity such as fiber optic cables for short distances.




Highlights • Compliant to industry standards

• InfiniBand Architecture specification (QSFP MSA SFF-8436 & SFP+ MSA SFF-8431)

• BER better than 1E-15

• Low crosstalk

• Low insertion loss

• Matched impedance

• Secure latching mechanism

• RoHS-5 compliant


Mellanox’s unique quality passive copper cable solutions provide power-efficient connectivity for short distance interconnects. It enables higher port bandwidth, density and configurability at a low cost and reduced power requirement in the data centers.

Optimizing systems to operate with LinkX 200Gb/s passive DAC cables significantly reduces power consumption and EMI emission.

Rigorous cable production testing ensures best out-of-the-box installation experience, performance and durability.




Product Diagram:

 



Full specification and details can be found in the Product Datasheet PDF file

100GbE to 2x50GbE (QSFP28 to 2xQSFP28) Direct Attach Copper Splitter Cable

100GbE to 2x50GbE QSFP28 to 2xQSFP28 Direct Attach Copper Splitter Cable

Mellanox Networking passive splitter breakout cable is a high speed, cost-effective, 100GbE to 2x50GbE, Ethernet connectivity solution designed to meet the growing needs for higher bandwidth in data centers.

MCP7H00 cables are compliant with SFF-8665 QSFP28 specifications and provide connectivity between systems using a QSFP28 port one side and two QSFP28 ports on the other. MCP7H00 connects the data signals from each of the 2 dual copper pairs on the single QSFP28 (pairs 1&2, 3&4) end to the dual copper pair of each of the QSFP28 (pair 1&2) ends on the multiport side. Each QSFP28 cage comprises an EEPROM providing product information, which can be read by the host system.




Highlights • 100GbE to 2x50GbE data rate

• SFF-8665 compliant QSFP28

• Operating case temperature 0-70C

• Single 3.3V supply voltage

• Bit Error Rate (BER) better than 1E-15

• Hot pluggable

• RoHS compliant

• LSZH (Low Smoke Zero Halogen) jacket

• LF (Lead Free) HF (Halogen Free) PCB

• SFF-8636 compliant I2C management interface


Mellanox’s unique, quality, passive copper cable solutions provide power-efficient connectivity for short distance interconnects. They enable higher port bandwidth, density and configurability at a low cost and reduced power requirement in the data centers.

Rigorous cable production testing ensures best out-of-the-box installation experience, performance and durability.




Product Diagram:

 




Full specification and details can be found in the Product Datasheet PDF file