Lindy VGA Adapters & Splitters

Holding Posts & Nuts for VGA Faceplate, Pack of 50

Key Features:



Allows you to internally attach a Premium Gold cable to our VGA Face Plate
Post: # 4-40 UNC, 14mm
Nut: # 4-40 UNC, 5mm
Each pack contains 50 nuts and 50 posts

Overview The Lindy Modular AV Face Plate System allows you to create your own custom face plates by using a combination of Snap-in Blocks and Keystone modules

Fit this Right Angled VGA Keystone into a face plate along side other Keystone and Snap-in modules.

These modules provide a full range of solutions for AV, networking, voice and audio installations

The wide selection of modules and face plates can be custom configured giving you greater control and flexibility.

Additional required products The Lindy Modular AV Face Plate System must be used in conjunction with Lindy Face Plates. Single Gang Face Plate and Double Gang Face Plate also available.

Product Details VGA Male to Female connectors


Allows VGA cables to be connected to a face plate


Suitable for use with our range of snap in blocks and wall plates


Gold plated connectors on front and rear


10 year warranty

Overview The Lindy Modular AV Faceplate System allows you to create your own custom face plates by using a combination of Snap-in Blocks and Keystone modules. Install this VGA Snap-in Block into a face plate along side other Keystone and Snap-in modules.

These modules provide a full range of solutions for AV, networking, voice and audio installations. The wide selection of modules and face plates can be custom configured giving you greater control and flexibility.

Additional Required Products The Lindy Modular AV Faceplate System must be used in conjunction with Lindy Faceplates. Single Gang Faceplate or Double Gang Faceplate are also available.

Product Details VGA Female to Female connectors


Allows VGA cables to be connected to a face plate


Suitable for use with our range of snap in blocks and wall plates


Gold plated pins on front and rear


2 year warranty

This splitter cable allows two monitors to be connected to a computer's single VGA port. It's a passive cable which simply splits a single VGA signal into two without any amplification or signal regeneration, making it an ideal, cost effective solution for shorter installations.

Features



Allows two VGA monitors to be connected to a single VGA output
VGA Male to 2 x VGA Female
Designed for short range desktop installations of up to 10m; for longer distances we recommend you use our VGA video splitter boxes
Gold plated connectors
Cable length: 0.18m

VGA EDID Emulator

Key Features:



Continuously emulates VGA EDID information
Supports resolutions up to 1920x1200@60Hz
For use with 32120 for cloning
Powered via VGA Source Interface, 3.5/1.35mm Optional DC jack for non-powered source devices
2 Year warranty


The Lindy VGA EDID Emulator is designed for systems that require EDID signals to be continuously provided without interruption and helps overcome EDID related problems which can occur when using AV/KVM extenders, switches and splitters. It can also be used in place of a monitor to keep the graphics card of a PC or server awake for remote access via IP. With support for resolutions up to 1920x1200@60Hz, the emulator is suitable for use with legacy PCs and displays. When used with the Lindy EDID recorder (32120) this device can provide cloned EDID information to the graphics card.

It is also possible to use the Emulator without cloning a display as it comes complete with pre-set EDID data for the most commonly used resolution/timing combinations, please see the Technical Information section for a full breakdown.

Specification:



AV Interface: VGA
Interface Standard: VGA
Supported Bandwidth: 4.95Gbps
Maximum Resolution: 1920x1200@60Hz
Video EDID:
1024x768@75Hz
1152x864@75Hz
1280x720@60Hz
1280x768@60Hz
1280x960@60Hz
1280x1024@60Hz/75Hz
1366x768@60Hz
1440x900@60Hz
1600x900@60Hz
1600x1200@60Hz
1680x1050@60Hz
1920x1080@60Hz
1920x1200@60Hz
Input: VGA (Female)
Output: VGA (Male)
Power: Powered by source device, 3.5/1.35mm (Optional)
Dimensions (approx.) WxDxH: 33x59x14mm (1.3x2.32x0.55in)
Housing Material: Metal
Net Weight: 0.027kg (0.06lb)
Operating Temperature: 0°C - 50°C (32°F - 122°F)
Storage Temperature: -20°C - 80°C (-4°F - 176°F)
Humidity: 0 - 90% RH (non-condensing)
Power Requirements: 5VDC 500mA (Optional)
Colour: Black
Packaging Type: Polybag
Packaging Dimensions: 133x144mm (5.24x5.67in)
Gross Weight: 0.042kg (0.09lb)
Warranty (Years): 2
Certificated: CE, FCC, RoHS, REACH & California Proposition 65


Package Contents:



VGA EDID Emulator
Lindy Manual


EDID - Extended Display Identification Data.
It is a way for a video source to discover the capabilities of the sink (display device) it is connected to. EDID information resides in the sink and is made available through the connection to a source device via HDMI, DP, DVI etc. When a sink is connected to a source it receives power for its EDID circuit from the source.

Datasheets / User Manuals / Quick Start Guides/ Charts can be downloaded from our Documentation tab (above)

The Lindy 2 Port VGA Splitter is a professional solution for splitting PC video content across two separate VGA displays, with simultaneous playback.

Supporting resolutions up to 2048x1536, this splitter is perfect for engaging educational installations, eye catching digital signage or display testing that utilise legacy PC's and monitors. This splitter is also cascadeable up to three layers, allowing for much larger display installations, all showing the same content from one VGA source device.

Please note: distances may vary on the quality of the cable used within the installation

Product Details

Duplicates a VGA signal from a PC to 2 VGA monitors, providing simultaneous viewing
Supports resolutions up to 2048x1536 (QXGA)
Cascadeable up to 3x for larger installations
Enhances the video signal up to 55m for longer distance broadcasting via cascading
2 Year Warranty

300m Cat.6 2 Port VGA Receiver

Key Features:



Receives VGA signals over 300m network cable from the compatible transmitter (35403)
Distribute the received signal across 2 separate VGA displays
Supports resolutions up to 1920x1080, with dual mono audio extraction
Adjustable EQ & gain control for ensuring optimum image quality
2-year warranty


VGA extenders distribute analogue video content across longer distances into multiple locations, using standard network cabling.

The Lindy 300m Cat.6 2 Port VGA Receiver is an ideal solution for distributing VGA signals to a single, or dual separate VGA display. Connected to the compatible transmitter (35403) via standard network cable, this receiver provides transmission of VGA signals up to 1920x1080, great for creating 4 separate distribution zones, such as classrooms or in security facilities. 

Dual VGA output ports allow for the connection of 2 separate VGA displays or projectors at the receiver side, useful when presenting information across multiple screens whether in monitoring and control, or smaller retail setups. 3.5mm dual mono audio connections also ensure speakers can be connected for supporting video content with high quality clear audio. 

EQ and gain controls, for sharpness and brightness, can be easily adjusted to ensure the optimum picture quality is always shown.

The receiver has a robust metal housing with mounting brackets, providing additional protection against accidental damage, ideal for use in industrial installations.

Specifications:



AV Interface: VGA
Supported Bandwidth: 350MHz
Maximum Distance: 300m (984.24ft)
Maximum Resolution:
300m (984.24ft) - 640x480
200m (656.16ft) - 800x600
180m (590.54ft) - 1024x768
120m (393.7ft) - 1280x1024
100m (328.08ft) - 1920x1080
Supported Audio: Dual Mono
Separate Audio Ports: 3.5mm
Transmission Medium: 1 x Cat.5e/6
Chipset: ISL59910
Special Features: Dual Mono Audio Extraction, Mountable Housing
Receiver Input: RJ-45 (Female)
Receiver Output: 2 x VGA (Female), 2 x 3.5mm (Female)
Power : 5.5/2.1mm
Dimensions (approx.) WxDxH: 87.6x94.6x31mm (3.45x3.72x1.22in)
Housing Material: Metal
Net Weight: 0.396kg (0.87lb)
Operating Temperature : 0°C - 50°C (32°F - 122°F)
Storage Temperature: -20°C - 70°C (-4°F - 158°F)
Humidity: 20 - 80% RH (non-condensing)
Power Requirements: 12VDC 1.2A
Colour: Black
Packaging Type: Carton Box
Packaging Dimensions: 177x75x110mm (6.97x2.95x4.33in)
Gross Weight: 0.481kg (1.06lb)
Warranty (Years): 2
Certificated: CE, FCC, RoHS, REACH & California Proposition 65


Package Contents:



300m 2 Port Cat.6 VGA Receiver
4 x Mounting Screws
Multi-country Power Supply (UK, EU, US & AUS)
Lindy Manual

300m Cat.6 4 Port VGA Splitter Extender Transmitter

Key Features:



Extends 4 x VGA signals simultaneously up to 300m with standard network cables
Combine with the compatible receiver (35404) to create a 4-zone extension solution
Supports resolutions up to 1920x1080, with dual mono audio embedding
Local VGA loop-out connection with dual mono audio extraction
2-year warranty


VGA splitter extenders distribute analogue video content across longer distances into multiple locations, using standard network cabling.

The Lindy 300m Cat.6 4 Port VGA Splitter is a high-quality solution for extending 4 separate analogue VGA signals over long distances using standard network cables when combined with the compatible receiver unit (35404). Supporting resolutions up to 1920x1080, this extender splitter provides high quality video for up to 4 separate distribution zones, such as classrooms or in security facilities. A 3.5mm female port ensures source devices or embedded audio can be added within the connection.

The VGA loop-out allows for the connection of a local display, great for monitoring and control of the setup. Dual mono audio extraction also provides the possibility of connecting speakers to the local setup.

The transmitter has a robust metal housing with mounting brackets, providing additional protection against accidental damage, ideal for use in industrial installations.

Specifications:



AV Interface: VGA
Supported Bandwidth: 350MHz
Maximum Distance: 300m (984.24ft)
Maximum Resolution:
300m (984.24ft) - 640x480
200m (656.16ft) - 800x600
180m (590.54ft) - 1024x768
120m (393.7ft) - 1280x1024
100m (328.08ft) - 1920x1080
Supported Audio: Dual Mono
Separate Audio Ports: 3.5mm
Transmission Medium: 1 x Cat.5e/6
Chipset: EL4543IUZ
Special Features: Local VGA Output with Dual Mono Audio Extraction, Dual Mono Audio Embedding, Mountable Housing
Transmitter Input: VGA (Female), 3.5mm (Female)
Transmitter Output: VGA (Female), 3.5mm (Female), 4 x RJ-45 (Female)
Power : 5.5/2.1mm
Dimensions (approx.) WxDxH: 135.4x73x31mm (5.33x2.87x1.22in)
Housing Material: Metal
Net Weight: 0.484kg (1.07lb)
Operating Temperature : 0°C - 50°C (32°F - 122°F)
Storage Temperature: -20°C - 70°C (-4°F - 158°F)
Humidity: 20 - 80% RH (non-condensing)
Power Requirements: 12VDC 1.2A
Colour: Black
Packaging Type: Carton Box
Packaging Dimensions: 177x75x110mm (6.97x2.95x4.33in)
Gross Weight: 0.547kg (1.21lb)
Warranty (Years): 2
Certificated: CE, FCC, RoHS, REACH & California Proposition 65


Package Contents:



300m 4 Port Cat.6 VGA Splitter
4 x Mounting Screws
Multi-country Power Supply (UK, EU, US & AUS)
Lindy Manual