iBoot

Dataprobe iBoot G2- Single Port Web Enabled Power Switch

iBoot-G2 is a 10/100 Ethernet network attached, IP addressed, Web Controlled power switch. Anyone with a web browser can access iBoot-G2 to perform power On, Off or Reboot (timed power shutdown). iBoot-G2 is password protected for security.

iBoot Features -

Access from any Network point - No field trips required for Reboot. Save time and money by eliminating service calls and reducing downtime to a minimum.
Web Control - No special software required. Works with any forms capable browser. Easy Web Administration for all configuration.
Dual Password Protected - Separate user and administrator passwords. Deploy iBoots throughout your organization.
IP Addressed, 10/100Base-T - Use on any Ethernet IP network. Public or private. Supports DHCP and alternate ports for Web Access.
Automatic Reboot Operation - Auto-Ping and Heartbeat Detector. Automatic Operation for crashed devices. Auto-Ping pings device while heartbeat listens for periodic message. Complete control over frequency and timers. Developer Assistance and software tools are free.
Direct TCP and Software Control - Control iBoot directly from your software application for the highest degree of power control integration. Simple protocol is freely available. Use iBoot control program to call power control from any network management system. IPSentry WhatsUp Gold, etc.
Built in Hub - Reduce cabling and simplify installation. One cable from you network closet serves both the iBoot and server, kiosk, etc. Auto-sensing for uplink/downlink eliminates the need for expensive crossover cables.
110/220 VAC Operation - Auto ranging power input. Deploy iBoot anywhere in the world. iBoot uses IEC320 Connectors and includes line and extension cords for.
12 Amp Switching - Current for most Servers, Routers, Kiosks, etc. 10 Amps at 220 VAC
iBoot Control Center Software - Control an unlimited number of iBoots from one software application. Group iBoots for simultaneous actions. Schedule time of day activities like reboot or shutdown every night.

iBoot-G2 is a 10/100 Ethernet network attached, IP addressed, Web Controlled power switch. Anyone with a web browser can access iBoot-G2 to perform power On, Off or Reboot (timed power shutdown). iBoot-G2 is password protected for security.

iBoot Features

Access from any Network point - No field trips required for Reboot. Save time and money by eliminating service calls and reducing downtime to a minimum.
Web Control - No special software required. Works with any forms capable browser. Easy Web Administration for all configuration.
Dual Password Protected - Separate user and administrator passwords. Deploy iBoots throughout your organization.
IP Addressed, 10/100Base-T - Use on any Ethernet IP network. Public or private. Supports DHCP and alternate ports for Web Access.
Automatic Reboot Operation - Auto-Ping and Heartbeat Detector. Automatic Operation for crashed devices. Auto-Ping pings device while heartbeat listens for periodic message. Complete control over frequency and timers. Developer Assistance and software tools are free.
Direct TCP and Software Control - Control iBoot directly from your software application for the highest degree of power control integration. Simple protocol is freely available. Use iBoot control program to call power control from any network management system. IPSentry WhatsUp Gold, etc.
Built in Hub - Reduce cabling and simplify installation. One cable from you network closet serves both the iBoot and server, kiosk, etc. Auto-sensing for uplink/downlink eliminates the need for expensive crossover cables.
110/220 VAC Operation - Auto ranging power input. Deploy iBoot anywhere in the world. iBoot uses IEC320 Connectors and includes line and extension cords for.
12 Amp Switching - Current for most Servers, Routers, Kiosks, etc. 10 Amps at 220 VAC
iBoot Control Center Software - Control an unlimited number of iBoots from one software application. Group iBoots for simultaneous actions. Schedule time of day activities like reboot or shutdown every night.
iBoot-WiFi Status with AutoPing Enabled

Clean web page design makes it easy to see the status and control power to any outlet. History log shows the last 5 events. If AutoPing or Heartbeat are enables, their status is displayed as well.

  Scheduling Setup

All the setup is handled with easy web forms. Set multiple schedules to have a clean reboot every morning, or shut down at night to reduce power waste.

    Mobile Pages

Take power control with you wherever you travel. iBoot Automatically detects mobile browsers and provides reduced clutter for easy one thumb access.

Dataprobe iBoot G2+ - Single Port Web Enabled Power Switch

iBoot-G2 is a 10/100 Ethernet network attached, IP addressed, Web Controlled power switch. Anyone with a web browser can access iBoot-G2 to perform power On, Off or Reboot (timed power shutdown). iBoot-G2 is password protected for security.

Use iBoot for:
Reboot - Remote reboot of any device, routers, servers, kiosks, etc. The device to be rebooted need not be network attached.
Security  - Secure sensitive devices by keeping them powered off when not in use.
Energy Savings -  Power down equipment when not needed for power savings and to save on wear and tear.
Notification - Power up alert devices like sirens, lamps, messages.
Control - Power up environmental system like heaters, coolers, pumps, etc.

iBoot Features -

Access from any Network point - No field trips required for Reboot. Save time and money by eliminating service calls and reducing downtime to a minimum.
Web Control - No special software required. Works with any forms capable browser. Easy Web Administration for all configuration.
Dual Password Protected - Separate user and administrator passwords. Deploy iBoots throughout your organization.
IP Addressed, 10/100Base-T - Use on any Ethernet IP network. Public or private. Supports DHCP and alternate ports for Web Access.
Automatic Reboot Operation - Auto-Ping and Heartbeat Detector. Automatic Operation for crashed devices. Auto-Ping pings device while heartbeat listens for periodic message. Complete control over frequency and timers. Developer Assistance and software tools are free.
Direct TCP and Software Control - Control iBoot directly from your software application for the highest degree of power control integration. Simple protocol is freely available. Use iBoot control program to call power control from any network management system. IPSentry WhatsUp Gold, etc.
Built in Hub - Reduce cabling and simplify installation. One cable from you network closet serves both the iBoot and server, kiosk, etc. Auto-sensing for uplink/downlink eliminates the need for expensive crossover cables.
110/220 VAC Operation - Auto ranging power input. Deploy iBoot anywhere in the world. iBoot uses IEC320 Connectors and includes line and extension cords for.
12 Amp Switching - Current for most Servers, Routers, Kiosks, etc. 10 Amps at 220 VAC
iBoot Control Center Software - Control an unlimited number of iBoots from one software application. Group iBoots for simultaneous actions. Schedule time of day activities like reboot or shutdown every night.

iBoot is a one port AC power switch that can be seamlessly integrated via an IP dress into 10/100 Ethernet networks. The iBoot is accessible with any current web browser to perform power On, Off or Reboot (timed power shutdown). You can access the iBoot with the webbrowser based and password protected on screen menu, which is included with the iBoot. iBoot is compatible with the IECC320 connectivity standard and supports 230 VAC up to 10 amps. A second version of the solution supports 5 to 48 VDC up to 2amps.

iBoot Features & Benefits

Access And Power Cycle Your Business Critical Hardware From Anywhere At Anytime
Keep-Alive Heartbeat-Detect-Function
Enhanced Webbrowser Based Remote Control
Two-tier Password Protected
Automatic Reboot Option (Off/On)
Integrated Hub
iBoot Control Center Software Included.

iBoot is a one port AC power switch that can be seamlessly integrated via an IP dress into 10/100 Ethernet networks. The iBoot is accessible with any current web browser to perform power On, Off or Reboot (timed power shutdown). You can access the iBoot with the webbrowser based and password protected on screen menu, which is included with the iBoot. iBoot is compatible with the IECC320 connectivity standard and supports 230 VAC up to 10 amps. A second version of the solution supports 5 to 48 VDC up to 2amps.

iBoot Features & Benefits

Access And Power Cycle Your Business Critical Hardware From Anywhere At Anytime
Keep-Alive Heartbeat-Detect-Function
Enhanced Webbrowser Based Remote Control
Two-tier Password Protected
Automatic Reboot Option (Off/On)
Integrated Hub
iBoot Control Center Software Included.

300IBOOTEXP allows expansion from your existing 300IBOOTG2+ to give independent control of up to three outlets.