Fluke Networks JackRapid Products

Replaceable blade heads JackRapid blade heads are specific to certain jack types--check the list below to see if JackRapid supports the jacks you use, and if not, look for a new JackRapid version in the future!

Patented jack termination tool allows you to terminate jacks 8 times faster. Cuts installation time - easy to use handle, seats and cuts all wires at once, saving you up to 1 minute installation time per jack!
High quality, consistent terminations - no more compromised connections and wasted jacks
Simple, one-handed operation with an ergonomically designed handle reduces hand fatigue
Unique design easily accommodates close-to-wall installation
Replaceable blade head for use with multiple jack types





JackRapid™ is a patented jack termination tool that saves time and increases accuracy by seating and terminating all wires at once with a simple squeeze of the handle. JackRapid allows you to terminate jacks eight times faster than traditional impact tools - with accuracy that's unmatched. 

The patented jack termination tool seats and terminates all wires simultaneously. The built-in blade cuts off the excess wire after it is seated in the connector, eliminating the need for a secondary trim step.

Simple, one-handed operation, with an ergonomically designed handle, reduces hand fatigue.  With JackRapid, you’ll never punch into the palm of your hand or through drywall again.

Terminate jacks 8 times faster Strip cable jacket.
Determine wiring scheme. Dress all 4 pairs (8 wires).
Insert jack in JackRapid front first with IDC slots facing blades of JackRapid.
Ensure jack is completely and securely inserted in jack holder bed with IDC slots facing the blades.
Pull trigger completely and remove excess wire prior to releasing trigger.
Wires will be seated and cut for a solid termination.
Release handle and remove jack from JackRapid tool. Visually verify proper termination.

Replaceable blade heads JackRapid blade heads are specific to certain jack types--check the list below to see if JackRapid supports the jacks you use, and if not, look for a new JackRapid version in the future!

Patented jack termination tool allows you to terminate jacks 8 times faster. Cuts installation time - easy to use handle, seats and cuts all wires at once, saving you up to 1 minute installation time per jack!
High quality, consistent terminations - no more compromised connections and wasted jacks
Simple, one-handed operation with an ergonomically designed handle reduces hand fatigue
Unique design easily accommodates close-to-wall installation
Replaceable blade head for use with multiple jack types





JackRapid™ is a patented jack termination tool that saves time and increases accuracy by seating and terminating all wires at once with a simple squeeze of the handle. JackRapid allows you to terminate jacks eight times faster than traditional impact tools - with accuracy that's unmatched. 

The patented jack termination tool seats and terminates all wires simultaneously. The built-in blade cuts off the excess wire after it is seated in the connector, eliminating the need for a secondary trim step.

Simple, one-handed operation, with an ergonomically designed handle, reduces hand fatigue.  With JackRapid, you’ll never punch into the palm of your hand or through drywall again.

Terminate jacks 8 times faster Strip cable jacket.
Determine wiring scheme. Dress all 4 pairs (8 wires).
Insert jack in JackRapid front first with IDC slots facing blades of JackRapid.
Ensure jack is completely and securely inserted in jack holder bed with IDC slots facing the blades.
Pull trigger completely and remove excess wire prior to releasing trigger.
Wires will be seated and cut for a solid termination.
Release handle and remove jack from JackRapid tool. Visually verify proper termination.

Introducing the new JackRapid, jack termination tool - the industry's most innovative and time-saving termination tool. This patented tool seats and terminates all wires simultaneously, with one squeeze of the ergonomic handle. Get accurate terminations and clean, consistent cuts every time.



Reduces installation time
Easy-to-use tool seats and cuts all wires at once.
Increases productivity – install jacks 8 times faster
Accurate, clean and consistent cuts and terminations
Consistent terminations every time, no more wasted jacks
Built-in bed helps hold jack in place
Eliminates user fatigue
Ergonomic handle
Convenient, built-in stripper
Future proof
Replaceable blade heads for use with multiple vendor jack types
Wall-friendly
Unique design easily accommodates close-to-wall installations

To view a JackRapid Punchdown Tool Animation Demo, please click here.

Introducing the new JackRapid, jack termination tool - the industry's most innovative and time-saving termination tool. This patented tool seats and terminates all wires simultaneously, with one squeeze of the ergonomic handle. Get accurate terminations and clean, consistent cuts every time.



Reduces installation time
Easy-to-use tool seats and cuts all wires at once.
Increases productivity – install jacks 8 times faster
Accurate, clean and consistent cuts and terminations
Consistent terminations every time, no more wasted jacks
Built-in bed helps hold jack in place
Eliminates user fatigue
Ergonomic handle
Convenient, built-in stripper
Future proof
Replaceable blade heads for use with multiple vendor jack types
Wall-friendly
Unique design easily accommodates close-to-wall installations

To view a JackRapid Punchdown Tool Animation Demo, please click here.

Introducing the new JackRapid, jack termination tool - the industry's most innovative and time-saving termination tool. This patented tool seats and terminates all wires simultaneously, with one squeeze of the ergonomic handle. Get accurate terminations and clean, consistent cuts every time.



Reduces installation time
Easy-to-use tool seats and cuts all wires at once.
Increases productivity – install jacks 8 times faster
Accurate, clean and consistent cuts and terminations
Consistent terminations every time, no more wasted jacks
Built-in bed helps hold jack in place
Eliminates user fatigue
Ergonomic handle
Convenient, built-in stripper
Future proof
Replaceable blade heads for use with multiple vendor jack types
Wall-friendly
Unique design easily accommodates close-to-wall installations

To view a JackRapid Punchdown Tool Animation Demo, please click here.

Introducing the new JackRapid, jack termination tool - the industry's most innovative and time-saving termination tool. This patented tool seats and terminates all wires simultaneously, with one squeeze of the ergonomic handle. Get accurate terminations and clean, consistent cuts every time.

Reduces installation time
Easy-to-use tool seats and cuts all wires at once.
Increases productivity – install jacks 8 times faster
Accurate, clean and consistent cuts and terminations
Consistent terminations every time, no more wasted jacks
Built-in bed helps hold jack in place
Eliminates user fatigue
Ergonomic handle
Convenient, built-in stripper
Future proof
Replaceable blade heads for use with multiple vendor jack types
Wall-friendly
Unique design easily accommodates close-to-wall installations

To view a JackRapid Punchdown Tool Animation Demo, please click here

Introducing the new JackRapid, jack termination tool - the industry's most innovative and time-saving termination tool. This patented tool seats and terminates all wires simultaneously, with one squeeze of the ergonomic handle. Get accurate terminations and clean, consistent cuts every time.



Reduces installation time
Easy-to-use tool seats and cuts all wires at once.
Increases productivity – install jacks 8 times faster
Accurate, clean and consistent cuts and terminations
Consistent terminations every time, no more wasted jacks
Built-in bed helps hold jack in place
Eliminates user fatigue
Ergonomic handle
Convenient, built-in stripper
Future proof
Replaceable blade heads for use with multiple vendor jack types
Wall-friendly
Unique design easily accommodates close-to-wall installations

To view a JackRapid Punchdown Tool Animation Demo, please click here.

Patented jack termination tool allows you to terminate jacks 8 times faster. Cuts installation time - easy to use handle, seats and cuts all wires at once, saving you up to 1 minute installation time per jack!
High quality, consistent terminations - no more compromised connections and wasted jacks
Simple, one-handed operation with an ergonomically designed handle reduces hand fatigue
Unique design easily accommodates close-to-wall installation
Replaceable blade head for use with multiple jack types





JackRapid™ is a patented jack termination tool that saves time and increases accuracy by seating and terminating all wires at once with a simple squeeze of the handle. JackRapid allows you to terminate jacks eight times faster than traditional impact tools - with accuracy that's unmatched. 

The patented jack termination tool seats and terminates all wires simultaneously. The built-in blade cuts off the excess wire after it is seated in the connector, eliminating the need for a secondary trim step.

Simple, one-handed operation, with an ergonomically designed handle, reduces hand fatigue.  With JackRapid, you’ll never punch into the palm of your hand or through drywall again.

Terminate jacks 8 times faster Strip cable jacket.
Determine wiring scheme. Dress all 4 pairs (8 wires).
Insert jack in JackRapid front first with IDC slots facing blades of JackRapid.
Ensure jack is completely and securely inserted in jack holder bed with IDC slots facing the blades.
Pull trigger completely and remove excess wire prior to releasing trigger.
Wires will be seated and cut for a solid termination.
Release handle and remove jack from JackRapid tool. Visually verify proper termination.
Replaceable blade heads

JackRapid blade heads are specific to certain jack types--check the list below to see if JackRapid supports the jacks you use, and if not, look for a new JackRapid version in the future!

Patented jack termination tool allows you to terminate jacks 8 times faster. Cuts installation time - easy to use handle, seats and cuts all wires at once, saving you up to 1 minute installation time per jack!
High quality, consistent terminations - no more compromised connections and wasted jacks
Simple, one-handed operation with an ergonomically designed handle reduces hand fatigue
Unique design easily accommodates close-to-wall installation
Replaceable blade head for use with multiple jack types





JackRapid™ is a patented jack termination tool that saves time and increases accuracy by seating and terminating all wires at once with a simple squeeze of the handle. JackRapid allows you to terminate jacks eight times faster than traditional impact tools - with accuracy that's unmatched. 

The patented jack termination tool seats and terminates all wires simultaneously. The built-in blade cuts off the excess wire after it is seated in the connector, eliminating the need for a secondary trim step.

Simple, one-handed operation, with an ergonomically designed handle, reduces hand fatigue.  With JackRapid, you’ll never punch into the palm of your hand or through drywall again.

Terminate jacks 8 times faster Strip cable jacket.
Determine wiring scheme. Dress all 4 pairs (8 wires).
Insert jack in JackRapid front first with IDC slots facing blades of JackRapid.
Ensure jack is completely and securely inserted in jack holder bed with IDC slots facing the blades.
Pull trigger completely and remove excess wire prior to releasing trigger.
Wires will be seated and cut for a solid termination.
Release handle and remove jack from JackRapid tool. Visually verify proper termination.
Replaceable blade heads

JackRapid blade heads are specific to certain jack types--check the list below to see if JackRapid supports the jacks you use, and if not, look for a new JackRapid version in the future!