Excel Cat5e Modules

Excel Cat5e RJ45 modules comply with the EIA TIA Standard for enhanced Category 5. Each shuttered module is supplied with a slide label field and space above, this is allowed for use of self adhesive or further labelling if required. Termination can be made using Krone tooling, a cable tie base is positioned between the IDC blocks to relieve cable stress.

Please Note: These modules are designed to fit only into Excel Faceplates found Here

Features Supports Gigabit Ethernet
Category 5e
25 x 50mm Euromod Size
Power Sum Compliant
LSA Style Termination Blocks
Built in Slide Label System
One Piece, Snap-in Design
Integral Cable Tie Position


Performance Overview

Excel Category 5e Data Outlets are manufactured and tested to the current Category 5 enhanced standards as defined by the TIA and ISO standards’ bodies. Swept frequency tests are applied to each critical performance characteristic, such as near end cross talk (NEXT) and far end cross talk (FEXT). Both Worst Case and Power Sum Test methods are applied. Actual performance exceeds the required standard by a considerable margin ensuring sufficient headroom for even the most demanding applications

Pre-assembled faceplates can be ordered to save installation time.

UTP RJ45 Cat5e Low Profile Shuttered Module

Excel Category 5e RJ45 modules comply with the EIA TIA Standard for enhanced Category 5. Each shuttered module is supplied with a slide label field and space above, this is allowed for use of self adhesive or further labelling if required. Termination can be made using Krone tooling, a cable tie base is positioned between the IDC blocks to relieve cable stress.

Please Note: These modules are designed to fit only into Excel Faceplates found Here

Features Supports Gigabit Ethernet
Category 5e
25 x 50mm Euromod Size
Low profile Design
Power Sum Compliant
LSA Style Termination Blocks
Built in Slide Label System
One Piece, Snap-in Design
Integral Cable Tie Position
Performance Overview

Excel Category 5e Data Outlets are manufactured and tested to the current Category 5 enhanced standards as defined by the TIA and ISO standards’ bodies. Swept frequency tests are applied to each critical performance characteristic, such as near end cross talk (NEXT) and far end cross talk (FEXT). Both Worst Case and Power Sum Test methods are applied. Actual performance exceeds the required standard by a considerable margin ensuring sufficient headroom for even the most demanding applications

UTP RJ45 Cat5e Shuttered Module - LJ6C Size

Excel Category 5e 6C RJ45 modules comply with the standards for enhanced Category 5. Each shuttered module is supplied with a slide label field and space above, this is allowed for use of self adhesive or further labelling if required. Termination can be made using LSA compatible tooling. The low profile and 6C cut out design makes this module ideal for installations in floor box environments or shallow dado trunking

Features Supports Gigabit Ethernet
Category 5e
6C design (22mm wide x 37mm high x 28.4mm deep)
Power Sum Compliant
LSA Style Termination Blocks
Built in Slide Label System


Performance Overview

Excel Category 5e Data Outlets are manufactured and tested to the current Category 5 enhanced standards as defined by the TIA and ISO standards’ bodies. Swept frequency tests are applied to each critical performance characteristic, such as near end cross talk (NEXT) and far end cross talk (FEXT). Both Worst Case and Power Sum Test methods are applied. Actual performance exceeds the required standard by a considerable margin ensuring sufficient headroom for even the most demanding applications

The Excel 3 in 1 module offers the ultimate in flexibility, space utilisation and ease of installation. The totally modular design allows the mounting of up to 3 shuttered RJ45 ports in a standard flat or bevelled single gang faceplate or up to 6 in a double gang fascia. The unique design means that you only load shuttered outlets as required, any capacity within the plate which is required for a later date is simply blanked off, providing a neat and easy to use completed installation. Individual port labelling is also quick and easy with standard Excel outlet slide in fields incorporated into the design.

Features

Category 5e compliant
High density design
Individual snap in modules
Fit standard Excel Faceplates (3 required for Single Faceplates, 6 required for Double Faceplates)
LSA compatible IDC
Individual port slide labelling system
Module dimensions 16.6(w) x 50(h) x 31.5(d) mm
Please Note: These modules are designed to fit only into Excel Faceplates found Here

Performance Overview

Excel Category 5e 3 in 1 modules are manufactured and tested to the current Category 5 enhanced standards as defined by the EIA/TIA and ISO standards’ bodies. Swept frequency tests are applied to each critical performance characteristic, such as near end cross talk (NEXT) and far end cross talk (FEXT). Both Worst Case and Power Sum Test methods are applied. Actual performance exceeds the required standard by a considerable margin ensuring sufficient headroom for even the most demanding applications. 

Pre-assembled faceplates can be ordered to save installation time.

Excel Screened RJ45 Cat5e Shuttered Module

Excel Category 5e RJ45 Screened modules comply with the EIA TIA Standard for enhanced Category 5. Each shuttered module is supplied with a slide label field and space above, this is allowed for use of self adhesive or further labelling if required. Termination can be made using Krone tooling, a cable tie base is positioned to the side of the IDC blocks to relieve cable stress.

Please Note: These modules are designed to fit only into Excel Faceplates found Here

Features Screened
Supports Gigabit Ethernet
Category 5e
25 x 50mm Euromod Size
Power Sum Compliant
LSA Style Termination Blocks
Built in Slide Label System
One Piece, Snap-in Design
Integral Cable Tie Position
Simple Earthing Point 


Performance Overview

Excel Category 5e Data Outlets are manufactured and tested to the current Category 5 enhanced standards as defined by the TIA and ISO standards’ bodies. Swept frequency tests are applied to each critical performance characteristic, such as near end cross talk (NEXT) and far end cross talk (FEXT). Both Worst Case and Power Sum Test methods are applied. Actual performance exceeds the required standard by a considerable margin ensuring sufficient headroom for even the most demanding applications

UTP RJ45 Cat5e 4 in 1 Module/Faceplate

A Double Gang Bevelled Faceplate complete with four Excel Data Modules. Individual port labelling is also quick and easy with standard Excel outlet slide in fields incorporated into the design

Excel Cat5e RJ45 modules comply with the EIA TIA Standard for enhanced Category 5. The shuttered module is supplied with a slide label field and space above, this is allowed for use of self adhesive or further labelling if required. Termination can be made using Krone tooling, a cable tie base is positioned between the IDC blocks to relieve cable stress.

Module Features
Supports Gigabit Ethernet
Category 5e
25 x 50mm Euromod Size
Power Sum Compliant
LSA Style Termination Blocks
Built in Slide Label System
One Piece, Snap-in Design
Integral Cable Tie Position


Performance Overview

Excel Category 5e Data Outlets are manufactured and tested to the current Category 5 enhanced standards as defined by the TIA and ISO standards’ bodies. Swept frequency tests are applied to each critical performance characteristic, such as near end cross talk (NEXT) and far end cross talk (FEXT). Both Worst Case and Power Sum Test methods are applied. Actual performance exceeds the required standard by a considerable margin ensuring sufficient headroom for even the most demanding applications

Accessories
(Sold Separately)

Cat5e Patch Leads IDC Punchdown Tool Cat5e Solid Cable Cat5e Modules

The new Excel Plus surface mount boxes can be used in a wide variety of applications and provide a quick and easy method of installing up to 6 outlets to work areas. These shuttered units can be installed in desk clusters, beneath retail counters, under floors or wall mounted. They are also ideal for temporary or emergency installations

Features

Category 5e compliant
Built in labelling field
Provides convenient workstation outlet for Gigabit Ethernet applications
Supplied with cable ties and fixing kit
Lifetime Product Warranty
Available in a choice of port density
25 Year System Warranty
Shuttered outlets as standard
Performance Overview
The Excel Plus surface mount boxes are manufactured and tested to the current Category 5 enhanced standards as defined by the TIA and ISO standards’ bodies. Swept frequency tests are applied to each critical performance characteristic, such as near end cross talk (NEXT) and far end cross talk (FEXT). Both Worst Case and Power Sum Test methods are applied. Actual performance exceeds the required standard by a considerable margin ensuring sufficient headroom for even the most demanding applications.

UTP RJ45 Cat5e 1 in 1 Module/Faceplate

A Single Gang Bevelled Faceplate complete with one Excel Data Module, centralised in the faceplate using blanks to enable future upgradeability to a double outlet.

Excel Cat5e RJ45 modules comply with the EIA TIA Standard for enhanced Category 5. The shuttered module is supplied with a slide label field and space above, this is allowed for use of self adhesive or further labelling if required. Termination can be made using Krone tooling, a cable tie base is positioned between the IDC blocks to relieve cable stress.

Module Features
Supports Gigabit Ethernet
Category 5e
25 x 50mm Euromod Size
Power Sum Compliant
LSA Style Termination Blocks
Built in Slide Label System
One Piece, Snap-in Design
Integral Cable Tie Position


Performance Overview

Excel Category 5e Data Outlets are manufactured and tested to the current Category 5 enhanced standards as defined by the TIA and ISO standards’ bodies. Swept frequency tests are applied to each critical performance characteristic, such as near end cross talk (NEXT) and far end cross talk (FEXT). Both Worst Case and Power Sum Test methods are applied. Actual performance exceeds the required standard by a considerable margin ensuring sufficient headroom for even the most demanding applications

Accessories
(Sold Separately)

Cat5e Patch Leads IDC Punchdown Tool Cat5e Solid Cable Cat5e Modules

UTP RJ45 Cat5e 3 in 1 Module/Faceplate

A Double Gang Bevelled Faceplate complete with Three Excel Data Modules, centralised in the faceplate using blanks to enable future upgradeability to a Quad outlet. Individual port labelling is also quick and easy with standard Excel outlet slide in fields incorporated into the design.

Excel Cat5e RJ45 modules comply with the EIA TIA Standard for enhanced Category 5. The shuttered module is supplied with a slide label field and space above, this is allowed for use of self adhesive or further labelling if required. Termination can be made using Krone tooling, a cable tie base is positioned between the IDC blocks to relieve cable stress.

Module Features
Supports Gigabit Ethernet
Category 5e
25 x 50mm Euromod Size
Power Sum Compliant
LSA Style Termination Blocks
Built in Slide Label System
One Piece, Snap-in Design
Integral Cable Tie Position


Performance Overview

Excel Category 5e Data Outlets are manufactured and tested to the current Category 5 enhanced standards as defined by the TIA and ISO standards’ bodies. Swept frequency tests are applied to each critical performance characteristic, such as near end cross talk (NEXT) and far end cross talk (FEXT). Both Worst Case and Power Sum Test methods are applied. Actual performance exceeds the required standard by a considerable margin ensuring sufficient headroom for even the most demanding applications

Accessories
(Sold Separately)

Cat5e Patch Leads IDC Punchdown Tool Cat5e Solid Cable Cat5e Modules

UTP RJ45 Cat5e 3 in 1 Module/Faceplate

Excel Category 5e 3 in 1 sets (3 shuttered RJ45 modules complete with bevelled single gang faceplates) offer the ultimate in flexibility, space utilisation and ease of installation.

Module Features

Category 5e compliant
High density design
Individual snap in modules
LSA compatible IDC
Individual port slide labelling system
Module dimensions 16.6(w) x 50(h) x 31.5(d) mm
Performance Overview

Excel Category 5e 3 in 1 modules are manufactured and tested to the current Category 5 enhanced standards as defined by the EIA/TIA and ISO standards’ bodies. Swept frequency tests are applied to each critical performance characteristic, such as near end cross talk (NEXT) and far end cross talk (FEXT). Both Worst Case and Power Sum Test methods are applied. Actual performance exceeds the required standard by a considerable margin ensuring sufficient headroom for even the most demanding applications. 

Accessories
(Sold Separately)

Cat5e Patch Leads IDC Punchdown Tool Cat5e Solid Cable Cat5e Modules

Excel 100-704 CAT5e White Pre-Loaded Single Gang Bevelled Faceplate

Single Gang Bevelled Faceplate complete with two Excel Data Modules. Individual port labelling is also quick and easy with standard Excel outlet slide in fields incorporated into the design.

Excel Cat5e RJ45 modules comply with the EIA TIA Standard for enhanced Category 5. Each shuttered module is supplied with a slide label field and space above, this is allowed for use of self adhesive or further labelling if required. Termination can be made using Krone tooling, a cable tie base is positioned between the IDC blocks to relieve cable stress.

Module Features

Supports Gigabit Ethernet
Category 5e
25 x 50mm Euromod Size
Power Sum Compliant
LSA Style Termination Blocks
Built in Slide Label System
One Piece, Snap-in Design
Integral Cable Tie Position


Performance Overview

Excel Category 5e Data Outlets are manufactured and tested to the current Category 5 enhanced standards as defined by the TIA and ISO standards’ bodies. Swept frequency tests are applied to each critical performance characteristic, such as near end cross talk (NEXT) and far end cross talk (FEXT). Both Worst Case and Power Sum Test methods are applied. Actual performance exceeds the required standard by a considerable margin ensuring sufficient headroom for even the most demanding applications



Accessories
(Sold Separately)

Cat5e Patch Leads IDC Punchdown Tool Cat5e Solid Cable Cat5e Modules

UTP RJ45 Cat5e 6 in 1 Module/Faceplate

Excel Category 5e 6 in 1 sets (6 shuttered RJ45 modules complete with bevelled double gang faceplates) offer the ultimate in flexibility, space utilisation and ease of installation.

Module Features

Category 5e compliant
High density design
Individual snap in modules
LSA compatible IDC
Individual port slide labelling system
Module dimensions 16.6(w) x 50(h) x 31.5(d) mm
Performance Overview

Excel Category 5e modules are manufactured and tested to the current Category 5 enhanced standards as defined by the EIA/TIA and ISO standards’ bodies. Swept frequency tests are applied to each critical performance characteristic, such as near end cross talk (NEXT) and far end cross talk (FEXT). Both Worst Case and Power Sum Test methods are applied. Actual performance exceeds the required standard by a considerable margin ensuring sufficient headroom for even the most demanding applications. 

Accessories
(Sold Separately)

Cat5e Patch Leads IDC Punchdown Tool Cat5e Solid Cable Cat5e Modules

Excel Single Gang Faceplate Flat

Excel Single Gang Faceplate Bevelled

Excel Double Gang Faceplate Flat

Excel Double Gang Faceplate Bevelled

32mm Single Gang Surface Mount Back Box

The Excel Back Boxes complement the Bevelled and Flat faceplates. The back boxes are constructed of ABS and include break away cable entries to accommodate different situations. Colour matched with Excel Bevelled and Flat Faceplates.

Features

Single Gang
Colour matched with Excel Bevelled and Flat Faceplates
32mm Deep
Dimensions - 86mm x 86mm
Surface back box

37mm Double Gang Surface Mount Back Box

The Excel Back Boxes complement the Bevelled and Flat faceplates. The back boxes are constructed of ABS and include break away cable entries to accommodate different situations. Colour matched with Excel Bevelled and Flat Faceplates.

Features

Double Gang
Colour matched with Excel Bevelled and Flat Faceplates
37mm Deep
Dimensions - 86mm x 146.5mm
Surface back box

Excel Half Width Blank 12.5mm x 50mm

The half width blank is half the size of a standard Euro sized Module and is designed to complement the Excel modules and faceplates

Excel Full Width Blank 25mm x 50mm

The full width blank is the size of a standard Euro sized Module and is designed to complement the Excel modules and faceplates

Excel Office Category 5e Low Profile RJ45 module have been designed to fit with the Excel Office Range of mounting hardware, which brings style and enhanced aesthetics to any Excel installation, thanks to the its curved plate finish and built in labeling fields.

Excel Category 5e Low Profile RJ45 modules comply with the standards for enhanced Category 5. Each shuttered module is supplied with a slide label field and space above, this is allowed for use of self adhesive or further labelling if required. Termination can be made using LSA compatible tooling. The low profile design makes this module ideal for installations in shallow dado trunking.

Features and Benefits

Excel Office Product colour matched
One Piece, Snap-in Design
Built in Slide Label System
Low Profile Design
LSA Style Termination Blocks
Choice of colours
Product specifications for these products can be found in the Documentation tab

Excel Office Category 5e Low Profile RJ45 module have been designed to fit with the Excel Office Range of mounting hardware, which brings style and enhanced aesthetics to any Excel installation, thanks to the its curved plate finish and built in labeling fields.

Excel Category 5e Low Profile RJ45 modules comply with the standards for enhanced Category 5. Each shuttered module is supplied with a slide label field and space above, this is allowed for use of self adhesive or further labelling if required. Termination can be made using LSA compatible tooling. The low profile design makes this module ideal for installations in shallow dado trunking.

Features and Benefits

Excel Office Product colour matched
One Piece, Snap-in Design
Built in Slide Label System
Low Profile Design
LSA Style Termination Blocks
Choice of colours
Product specifications for these products can be found in the Documentation tab

Excel Category 5e RJ45 modules comply with the EIA TIA Standard for enhanced Category 5. Each shuttered module is supplied with a slide label field and space above, this is allowed for use of self adhesive or further labelling if required.

Termination can be made using Krone tooling, a cable tie base is positioned to the side of the IDC blocks to relieve cable stress.

Features and Benefits

Category 5e
Low profile
Fits 27mm back box when used with bevelled faceplate
Built in slide label system
Choice of colours
25 Year system warranty
Product specifications for this product can be found in the Documentation tab