DLink Wireless Bridges

5 km Long Range Wireless AC Bridges

Resilient solutions that overcome the challenges of rural areas and tricky terrain to supply stable, high-speed connectivity over vast distances.




Product Features: Connect wirelessly at up to 5 km distance with up to 867 Mbps speed
Point-to-point or point-to-multipoint deployment
IP66-rated water-resistant and dust-tight housing
TDMA Technology, 8 kV surge protection
128-bit personal and enterprise wireless encryption
PoE support and comes with PoE injector







 



Designed for Wireless ISPs Rapid and cost-effective Internet distribution to get customers connected.




The power to withstand tough weather The DAP-3711 is enclosed in an unobtrusive IP66-rated housing, protecting it from rain and dirt. With built-in 8 kV surge protection, the DAP-3711 has protection against unexpected surges (such as lightning strikes), enabling it to be deployed where it’s needed, even in harsh environments and tough conditions.






Bring connectivity to areas with limited or no access to fixed internet The DAP-3711 features state-of-the-art hardware, including powerful high-gain 15 dBi directional antennas that effortlessly extend the coverage of 5GHz wireless AC speeds of up to 867Mbps to distances of up to 5 km away.





Consistent coverage that filters out interference The DAP-3711 supports TDMA technology, creating a schedule for the bridge's access point and the client. The sender and receiver are allocated a time slot for transmissions, eliminating hidden node data collisions, maximising airtime efficiency, significantly cutting down interference, and dramatically improving the transfer rate.







Simple installation with Power over Ethernet (PoE) The DAP-3711 comes with a PoE injector included. No need to run extra power lines, no added hassle when configuring your hardwiring, and no more cable clutter.















           The power to deliver long-distance connectivity The DAP-3711 is the essential infrastructure wireless solution in providing a reliable solution for outdoor wireless networking.

 



Physical Power Input PoE 24 V Power Consumption ? 15 W Operating Temperature -40ºC to 65ºC Temperature (Storage) -40ºC to 85ºC Humidity (Operating) 0% to 90% non-condensing Humidity (Storage) 0% to 90% non-condensing Dimensions 288 x 88 x 45 mm Weight 600 g General Device Interfaces 2 x 100/1000 Mbps Ethernet port, reset button LEDs Power, LAN, WLAN, signal strength Antenna Type Internal Antenna Gain 15 dBi Beamwidth H: 40°, V: 15° Standards 802.11a/n/ac Full specification and details can be found in the

20 km Long Range 802.11ac Wireless Bridge

A resilient solution that overcomes the challenges of rural areas and tricky terrain to supply stable, high-speed connectivity over vast distances




Product Features: Features high-gain 23 dBi directional antenna supplying high-speed, stable coverage to up to 20 km away
Integrated TDMA Technology cuts through interference to ensure high-speed, consistent coverage
Superior throughput with single-band transfer speeds of up to 867 Mbps
Refined design effortlessly blends into any setting
Supports WPA2™ - Wi-Fi security for more protection
Support for Power over Ethernet means less wires, for cleaner and easier deployment
Features an IP66 rating, boasting water-resistant and dust-tight housings





 




Highlights The DAP-3712 is the essential solution in providing connectivity to previously believed impossible-to-reach areas. Industry leading core technologies, especially designed for long distance coverage, bring high-speed connectivity to rural areas and challenging terrain equivalent to that of a wired connection.



 

TDMA Technology Cuts Through the Chatter, Creating Even Stabler Coverage The DAP-3712 transmission capability is augmented thanks to its integrated Time Division Multiple Access (TDMA). Everything works more efficiently on a schedule, and the DAP-3712 is no different: TDMA creates a schedule for multiple connected clients to work to. Senders and receivers get their own time slot for transmissions. This eliminates hidden node data collisions, in turn maximizing airtime efficiency, significantly cutting down interference and making for a highly scalable solution.



Discreet Deployment that’s Hassle-Free with Power Over Ethernet (PoE) Power sockets can be tricky to come by, especially in outdoor deployments. But PoE makes for easy installation and a simple, clean setup. No need to run extra power lines, no added hassle when configuring your hardwiring, and no more cable clutter.











 



 






Cutting Edge Hardware Makes the Previously Impossible, Possible The DAP-3712 features state-of-the-art hardware, including a high-gain 23 dBi directional antennas. This powerful antenna effortlessly extends high-speed coverage to distances of up to 20 km away.



 



Physical Power Input PoE+ 48 V Power Consumption ? 15 W Operating Temperature -40ºC to 65ºC Temperature (Storage) -40ºC to 85ºC Humidity (Operating) 0% to 90% non-condensing Humidity (Storage) 0% to 90% non-condensing Dimensions 372 x 372 x 241 mm / 14.6 x 14.6 x 9.5 in Weight 900 g / 2.0 lbs General Device Interfaces 1 x 100/1000 Mbps Ethernet port, reset button LEDs Signal strength Antenna Type Dish Antenna Gain 23 dBi Beamwidth H: 10°, V: 10° Standards 802.11a/n/ac Full specification and details can be foun in the