D-Link Wireless Access Points

The DAP-1665 Wireless AC1200 Wave 2 Dual-Band Access Point is a fast and versatile solution supporting latest 802.11ac Wave 2 technology delivers combined speeds of up to 1200 Mbps with MU-MIMO and beamforming.

It supports multiple operational modes and can operate as an AP, bridge, bridge with AP, repeater, wireless client, WISP client or repeater, giving the flexibility to tailor it to your network needs.

Features
High-Performance Connectivity
IEEE 802.11ac Wave 2 wireless
Up to 1200 Mbps speed
MU-MIMO with beamforming
Gigabit LAN port
Multiple Operation Modes
Access Point
Wireless Client
Bridge
Bridge with AP
Repeater
WISP Client Router
WISP Repeater (Range Extender)
Security
Advanced wireless security features including MAC address, filter, wireless LAN partition and user limit
WPA/WPA2 security encryption to protect your wireless traffic
Quickly and easily add new wireless devices with Wi-Fi Protected Setup (WPS)
Kensington lock port to protect against theft



Performance without Compromise Incorporating industry leading Wireless AC Wave 2, the DAP-1665 delivers up to 3 times* the performance of Wireless N by supporting simultaneous dual-band operation

Comprehensive Security Advanced wireless security features including MAC address, filter, wireless LAN partition, user limit as well as latest WPA/WPA2 wireless encryption to protect your network and wireless data






Flexible Wireless

The DAP-1665 delivers a combined wireless speed of up to 1200Mbps with MU-MIMO and beamforming, with increased capacity and range enabling your Wi-Fi to reach more places in your home or office.
Flexibile Deployment Scenarios

Supporting up to 7 different operating modes, the DAP-1665 Can operate as an Access Point (AP), bridge, bridge with AP, repeater, wireless client, WISP client or repeater, giving the flexibility to tailor it to your network needs.




Simultaneous Dual-Band Wireless

Supports up to 900Mbps for the 5Ghz band and up to 300Mbps for the 2.4Ghz band.

Smart Design

The DAP-1665 has a wireless scheduler feature, which turns off wireless functionality when it isn’t needed, saving power and increasing network security.



* When compared to Wireless N300

The DAP-3315 Wireless N PoE Outdoor Access Point is the ideal solution for expanding the coverage and signal strength of any wireless network. Built to withstand harsh environments, the DAP-3315 also excels in connecting separate networks that cannot be joined physically using cabling. Multiple operating modes, network management tools, and security features give network administrators a wide range of choices for deploying the device, allowing for the addition of increased connectivity to wireless network-enabled devices.

Features:

High-performance Connectivity Made for Business-class Environments Wireless 802.11n/g/b, compatible with 802.11b and 802.11g devices
Up to 300 Mbps3
Two 10/100 Ethernet ports
2.4 GHz 802.11n Connectivity for Increased Network Capacity
High Power Radio Design1
Built-in High Gain Sector Antenna
Waterproof IPX5 Standard2
4kV surge protection
15kV ESD protection
Convenient Installation Trusted Security Proprietary PoE Design
Wall/Pole Mount Included
WPA/WPA2 Personal
WPA/WPA2 Enterprise
64/128 bit WEP Encryption
802.1x
MAC address filtering
Client Isolation
User Limit
Increased Network Connectivity and Throughput

Expand current wireless network capacity with the latest 2.4 GHz 802.11n wireless connectivity. In addition, two 10/100 Ethernet ports (one supporting PoE) allow for further physical expansion using traditional wired medium. The built-in 12 dBi sector antenna has a high power output4 ensuring that wireless coverage will cover even hard to reach locations. Whether you want to connect additional wireless devices such as smartphones or laptops, or bringing connectivity to networks separated by short distances, the DAP-3315 has it all covered. Flexible Deployment Options

The DAP-3315 features seven multiple operation modes, allowing it to adapt to any situation. As a standard wireless access point (AP) the DAP-3315 can connect to a wide range of devices that are 802.11n/g/b compliant. In wireless distribution system (WDS) mode it can expand current wireless coverage without the need for a wired backbone link5 . As a wireless client, it can connect to an existing AP and expand the network physically with the two built-in 10/100 Ethernet ports. Repeater mode will extend current wireless coverage eliminating dead spots and weak signals. WISP mode functionality includes the ability to function as a client or repeater. 1 Maximum power setting will vary according to individual country regulations.
2 IPX5 standard means the device is protected from low pressure jets of water from the top and the front directions - limited ingress permitted. It is recommended to place this device under a roof, shelter or in weather-proof box when in severe weather environment.
3 Maximum wireless signal rate derived from IEEE Standard 802.11g, and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors may adversely affect wireless signal range.

Business Class Wi-Fi. With simultaneous dual-band, PoE support, extensive manageability, versatile operation modes, and robust security enhancements, the DAP-2610 Wireless AC1300 Wave 2 Dual-Band PoE Access Point provides a reliable solution for deploying a business-class wireless network.



Enterprise Wireless Performance The DAP-2610 delivers reliable, high-speed wireless performance using the latest 802.11ac Wave 2 standard with wireless signal rates of up to 1.3 Gbps (400 Mbps over the 2.4 GHz band and 900 Mbps over the 5 GHz band)1.

Technology that makes a difference MU-MIMO allows multiple devices to get high-bandwidth Wi-Fi signal at the same time, distributing data more efficiently. Beamforming improves coverage and speed by directing Wi-Fi signal directly to the client device. Band Steering automatically connects each device on the network to the best, clearest band available for the best connection.

Legacy MIMO MU-MIMO



Built-in RADIUS and Dynamic VLAN WPA/WPA2 Enterprise can connect to your existing RADIUS server or use the built-in RADIUS server allowing users to create their accounts within the device itself.

Network Access Protection (NAP) this allows dynamic VLAN assignment for each wireless client upon authentication. Up to eight VLANs per band and bandwidth controls are supported, for further user segmentation.



Guest access control Provide Guest access with a Captive Portal. Combine it with RADIUS authentication and Dynamic VLAN for Guest bandwidth and access control.



Scalable Wireless Network Management D-Link’s free Central WiFiManager: configure and manage multiple access points centrally from a remote location. This allows network administrators to conduct configuration and regular maintenance checks on large deployments remotely, eliminating the need for sending out personnel.
AP Array: simply configure one access point and have the settings automatically sync to the rest of the group. With D-Link’s AP Array technology you can even use different AP models in the array2.
Secure and user friendly web GUI.
Command line (SSH and Telnet).
 

Flexible deployment With 802.3af Power over Ethernet (PoE) support, you can easily install in areas where power outlets are not available. WDS support allow multiple DAP-2610s to bridge with one another, while also providing network access to individual clients. Additionally, advanced features such as load balancing and redundancy ensure fail-safe wireless connectivity.

 

Multiple Operation Modes Configure your DAP-2610 access point to meet your specific wireless network requirements with any one of its multiple operation modes: Access Point, Wireless Distribution System (WDS), a WDS with Access Point, and Wireless Client.





Efficient Power Saving The DAP-2610 has a built-in schedule function which dynamically powers down the wireless network off when not in use. This feature reduces power consumption, saving energy and money.

Nuclias Connect Hub

The Nuclias Connect Hub is a standalone controller pre-loaded with the Nuclias Connect centralised network management software. Designed to support small-to-medium business and larger enterprise environments, the Nuclias Connect Hub provides network administrators with the capability to manage up to 100 access points through one single device. It features a comprehensive set of network management, security, monitoring and troubleshooting functionalities as well as multiple access management tools

The Nuclias Connect Hub is compatible with a wide range of indoor and outdoor wireless access points, including support for PoE and the latest 802.11ac Wave 2 standard. Multiple Nuclias Connect Hubs can be centrally managed through the single sign-on portal, which can be accessed through the dedicated mobile app or via a web browser






 



 




Simple and Cost-Effective: Discover, manage, configure, and monitor up to 100 APs per controller
Cost-effective; no extra server needed for access point management
Simply add more controllers when you want to scale up your network



Versatile Installation: Rack-mountable
Small form-factor for easy placement
Integrated hardware controller and selfcontained application server in one device





Nuclias Connect Centralised Management: Powerful management, monitoring, and troubleshooting functionalities
Local and multi-site access point management
Reports system in place to administer and monitor wireless network
Single sign-on (SSO) portal for centralised remote management of multiple Nuclias Connect Hubs
Accessible through the downloadable app or standard web browser





Industry-leading hardware that brings value to your business The Hub features centralised monitoring and management of all wireless APs on your network. Designed to perfectly fit in network environments, the DNH-100 Hub is an inexpensive dedicated hardware option with the Nuclias Connect software pre-installed, so you don’t need to purchase and install Nuclias Connect on a separate compatible third-party server.




 

What Nuclias Connect means for administrators Since Nuclias Connect’s software operates transparently on the network, an AP can be deployed anywhere in a NAT environment. Moreover, administrators can provide and manage a variety of distributed deployments, including the option to configure settings and administrator accounts for each deployment. The built-in Nuclias Connect software allows for multiple user authentications and also makes it possible to configure specific access controls for each SSID, giving admins the option of configuring separate internal networks for different subnets. This means that more advanced Value-Added Services, such as Captive Portal or Wi-Fi Hotspot, can be used to help manage wireless network traffic.






Free Nuclias Connect app Manage the network remotely with the free Nuclias Connect app. Instantly detect your devices in the network and push configurations remotely by using the app’s intuitive interface. Available on both iOS and Android phones, enjoy the convenience of remote network management on the go.













 






Scale your network alongside your business The Nuclias Connect Hub gives you the financial and technical flexibility to scale up the network simply by adding more Hubs while retaining a robust and centralised management system. Device information is stored locally and the network can be monitored in real-time.



 






 



Know your business network, like never before Use the Hub’s built-in Nuclias Connect software to monitor and remotely manage your wireless networks. It also makes it easier to scale the network as new APs are automatically discovered enabling them to be quickly configured and deployed. Easily manage your network on the go, get an instant overview of live usage and your network’s health, and delegate access to your teams. You can even upload your own map to visually show the location of your devices and create Wi-Fi access log-in pages that can be fully branded.



 




Physical Max. Power Consumption 6.5 W Power Supply Internal power supply Operating Temperature 0 to 40 °C / 32 to 104 °F Temperature (Storage) -20 to 65 °C / -4 to 149 °F Humidity (Operating) 10% to 90% non-condensing Humidity (Storage) 5% to 95% non-condensing Dimensions 190 x 100 x 31 mm / 7.48 x 3.94 x 1.22 in Weight 529 g (1.16 lbs) without mcroSD card General Device Interfaces 1 x Gigabit LAN, 1 x USB 3.0 (offers 5V / 1A power), 1 x MicroSD Slot, 1 x RJ45 Console Standards IEEE 802.3u/ab IEEE / 802.3x Flow Control Full specification and details can be found in the

Wireless AC1200 Wave 2 Dual-Band PoE Access Point

The WiFi4EU ready DAP-2662 Wireless AC1200 Wave 2 Dual-Band PoE Access Point is designed to provide wireless connectivity in public places, such as public buildings, libraries, health centres and museums, with secure and centrally manageable dual-band Wi-Fi. Utilising the cutting-edge speed of 802.11ac Wave 2, it deliveres maximum combined wireless signal rates of up to 1200Mbps and supports MU-MIMO technology that allows multiple devices to get high-bandwidth Wi-Fi signal at the same time, distributing data more efficiently. It is Passpoint® certified by Wi-Fi Alliance and complies with Hotspot 2.0, making the process of devices finding and getting access to the known network seamless.







Product Features: 802.11ac Wave 2 wireless, up to 1.2 Gbps1, with band steering
WiFi4EU ready, 2x2 MU-MIMO with beamforming
Gigabit, PoE-capable LAN port
Free Nuclias Connect network management software
Limited Lifetime Warranty & Free Next Business Day Service









Perfect for WiFi4EU municipalities. Ticks all of the boxes Deliver wireless connectivity for public places, such as buildings, libraries, health centres and museums, with secure and centrally manageable dual-band Wi-Fi. Connect people to better Wi-Fi with cutting-edge 802.11ac Wave 2 speeds, and greater network efficiency and security.






Connect entire crowds to a safer and faster internet. It supports up to eight VLANs per band, allowing multiple SSIDs to segment users. Includes a wireless client isolation mechanism, which limits direct client-to-client communication. Moreover, Network Access Protection (NAP), a feature of Windows Server® 2008 and upwards, allows multiple levels of network access to be defined based on a client’s needs.






Versatile deployments. It can be ceiling-mounted, wall-mounted, or placed on a desk. Integrated 802.3af Power over Ethernet (PoE) support makes for more convenient indoor deployments using a single Ethernet cable.





Best-in-class security Create highly secure wireless networks with Personal and Enterprise versions of WPA and WPA2. The AP also supports a built-in RADIUS server, RADIUS server (backend), MAC address filtering, wireless LAN segmentation, SSID broadcast disable, rogue AP detection, and wireless broadcast scheduling to protect the network.






Nuclias hardware controller The DNH-100 Wireless Controller provides an inexpensive, ready-made solution, and removes the need for installing and maintaining Nuclias Connect on additional hardware such as a server or PC. It supports up to 100 APs, automatically detects devices, pushes configurations, and provides robust hardware management. Simply plug in and power on.





Free Nuclias Connect remote network management software Download our free Nuclias Connect network management software that’s designed for network privacy, control, and cost-effective scaling. It can be used as an on-premises software management platform, or as a cloud solution. Alternatively, the dedicated Nuclias Connect Hub (DNH-100)4 provides hardware-based, centralised network management.

















Reliably faster Wireless AC performance Designed for reliable, high-speed wireless connectivity using the latest 802.11ac Wave 2 technology. It uses maximum wireless signal rates of up to 867 Mbps over the 5 GHz band and 300 Mbps over the 2.4 GHz band1.




 



Bring free Wi-Fi to Europeans with our WiFi4EU range. In order to promote free Wi-Fi connectivity in public spaces, the European Commission’s WiFi4EU initiative aims to provide EU municipalities with funding for Wi-Fi equipment.









Your network, your way. Customise your network the way you need it to perform. The AP can be used as a standalone AP or part of a centralised, scalable, multi-device deployment. Configure the AP to optimise network performance based on any one of its multiple operational modes:

Access Point - Add wireless connectivity to an existing wired network.



Wireless Client - Add wireless connectivity to one device which doesn’t have a Wi-Fi adapter.



WDS - Wirelessly combine two separate networks.

WDS with AP - Wirelessly combine two separate networks while also providing wireless connectivity to both networks.



 

 



Physical Max. Power Consumption 11 Watts Operating Voltage 12 V DC +/- 10% (power adapter not included) / 802.3af PoE Operating Temperature 0 to 40 °C / 32 to 104 °F Temperature (Storage) -20 to 65 °C / -4 to 149 °F Humidity (Operating) 10% to 90% non-condensing Humidity (Storage) 5% to 95% non-condensing Dimensions 170 x 170 x 28 mm / 6.69 x 6.69 x 1.1 inches Weight 316 grams General Device Interfaces 802.11a/b/g/n/ac wireless / 1 Gigabit LAN port (supports PoE) LEDs Power Antennas Two internal 3 dBi for 2.4 GHz / Two internal 4 dBi for 5 GHz Wireless Frequency Range 2.4 GHz band: 2.4 GHz to 2.4835 GHz / 5 GHz band: 5.15 to 5.35 GHz, 5.47 to 5.85 GHz Full specification and details can be found in the

The DAP-2680 Wireless AC1750 Wave 2 Dual-Band PoE Access Point is designed to support small to medium business or enterprise environments by providing network administrators with secure and manageable dual-band wireless LAN options, and utilising the cutting-edge speed of 802.11ac Wave 2

Features

High-Performance Connectivity IEEE 802.11ac Wave 2 wireless
Up to 1750 Mbps speed
MU-MIMO with beamforming
Band steering
Gigabit PoE-capable LAN port
Extensive Management

Web, SSL, SSH and Telnet management
SNMP v1, v2c, v3
D-Link Central WiFiManager support for additional configuration options
AP Array utility support
Faster Wi-Fi, Faster Business

The DAP-2680 Wireless AC1750 Wave 2 Dual-Band PoE Access Point features cutting-edge Wave 2 technology that brings greater speeds, efficiency, and security to your wireless customers. Perfect for small to medium business or enterprise environments..

AC1750 Wave 2 Wi-Fi Multiple Operational Modes MU-MIMO & Beamforming   Combined wireless speeds of up to 1.75 Gbps* with 802.11ac Wave 2 technology   Functions as an access point, Wireless Distribution System (WDS), WDS with access point, or wireless client.   Allows multiple devices to connect simultaneously for improved efficiency. And creates highly-targeted Wi-Fi connections for superior Wi-Fi bandwidth. Band steering Smart, secure & green Limited Lifetime Warranty   Automatically handles busy traffic so the fastest, least congested band is used by each client.   The wireless scheduler feature, which turns off wireless functionality when it isn’t needed, saves power and increases network security.   Register and you’re fully protected with limited lifetime warranty support from one of the global leaders in the industry. Corporate-Class Security

Secure your business network with Personal and Enterprise versions WPA2 (802.11i), with support for RADIUS server backend or a built-in internal RADIUS server. MAC address filtering, wireless LAN segmentation, SSID broadcast disable, rogue AP detection, and wireless broadcast scheduling further protect your wireless network.

It supports up to eight VLANs per band, allowing multiple SSIDs to segment users. Includes a wireless client isolation mechanism, which limits direct client-to-client communication. Additionally, it supports Network Access Protection (NAP), a feature of Windows Server® 2008 and upwards, allowing network administrators to define multiple levels of network access based on an individual client’s needs..

Greater Speed & Connectivity

It provides unparalleled connectivity by using the 802.11ac Wave 2 standard. High combined data rates of 1750 Mbps (1300 Mbps for 802.11ac and 450 Mbps for 802.11n) can be delivered over the air and Wi-Fi Multimedia (WMM) together with 802.1p Quality of Service (QoS) can give time-sensitive traffic like Voice over IP (VoIP) or video streaming a higher priority ahead of other traffic.

Beamforming with MU-MIMO

Beamforming focuses the Wi-Fi signal to improve both range and connection strength so your clients can enjoy a superior Wi-Fi experience. Built-in Multiple-Input and Multiple-Output (MU-MIMO) technology gets high-bandwidth Wi-Fi signals to multiple devices simultaneously, for faster data distribution and efficiency.

Dual-Band Wireless for efficient performance

The 2.4 GHz and high-speed 5 GHz AC channels and band steering technology makes your business network flexible by automatically placing clients on the optimal band for their needs like casual web browsing, and data-hungry operations like video streams and large file transfers.



Free Wireless AP Controller software

D-Link’s free Central Wifi Manager is a cloud enabled wireless Access Point management tool, designed to allow you to create and manage multi-site, multi-tenancy wireless networks.

The DWL-6610AP Wireless AC1200 Dual-Band Unified Access Point is designed for small to medium businesses and enterprises, providing unparalleled bandwidth and flexibility for medium to large scale Wi-Fi networks. Featuring the latest 802.11ac technology on its 5 GHz band, the DWL-6610AP allows you to deploy more devices and provide greater throughput for your wireless clients.

Features

Ideal for Business

Self-configuring cluster feature
Up to 32 virtual access points may be created from a single access point
Flexible QoS with Wi-Fi Multimedia (WMM)
IEEE 802.3af Power over Ethernet (PoE)
UL2043 certified chassis (plenum-rated SKU)
High-Performance Connectivity

Bandsteering for efficient traffic management
One Gigabit Ethernet LAN port
Airtime fairness
Trusted Wireless Security Feature

WPA/WPA2 Personal
WPA/WPA2 Enterprise
MAC address filtering
Rogue AP detection
Greater Reach and Flexibility

The DWL-6610AP provides unparalleled connectivity by using a 2 x 2 antenna implementation, allowing high combined data rates of 1167 Mbps (867 Mbps2 for 802.11ac, and 300 Mbps2 for 802.11n) over the air. With Wireless AC technology, the DWL-6610AP provides highperformance connections over two bands, so wireless clients can stream media faster and farther than before using existing devices. Centrally Managed

When working in conjunction with D-Link Unified Controllers, the DWL-6610AP can be centrally managed. This allows for a large number of APs to be deployed and managed easily and efficiently. Once the APs are discovered by the controller, the administrator can push configuration to them as a group, instead of doing so individually. Additionally, Radio Frequency (RF) resource management allows wireless coverage to be managed centrally, proving the best coverage possible for wireless clients. Self-Configuring Cluster

For small businesses that need to deploy multiple APs but lack the resources for complex network management, the DWL-6610AP self-configuring cluster allows a small number of DWL-6610AP access points to be set to form a self-configuring cluster. Once the administrator configures one access point, the same configuration can then be applied to all remaining APs, making setting up your wireless business network a breeze.

Smart Design

The DWL-6610AP can be mounted easily onto any wall or ceiling without looking out of place in an office or home. Enclosed in a plenum-rated UL2043 certified housing, the DWL-6610AP adheres to strict fire codes for placement in air passageways.



Band Steering technology

With band steering, the DWL-6610AP detects whether or not the wireless client is dual-band capable, and if so, it pushes the client to connect to the less congested 5 Ghz band. It does this by actively blocking the client’s attempts to associate with the 2.4 Ghz network.



Versatility Built as standard

Whether you intend to use a single Access Point or roll out a large corporate network, the DWL-6610AP coupled with a D-Link Wireless Controller or Unified Switch makes managing your wireless network simple.



Secure and Green Design

The DWL-6610AP has a wireless scheduler feature, which turns off wireless functionality when it isn’t needed, saving power and increasing network security.

Nuclias Connect AX1800 Wi-Fi 6 Access Point

The Wi-Fi 6 ready DAP-X2810 is on hand to provide unbeatable speeds, greatly increased capacity and interference-free coverage throughout businesses, paired with the easy management of Connect.




Product Features: Easy to manage with D-Link’s free software-based management solution, Nuclias Connect
Wi-Fi 6 ready: delivers greater network efficiency and lower latency, with nearly four times the capacity of previous Wi-Fi standards
MU-MIMO slices through congestion, reducing wait time for all users
Superior throughput with dual-band Wi-Fi offers high transfer speeds of up to 1800 Mbps
Coverage is shared more efficiently over more users with Airtime Fairness
Band Steering intelligently manages users, pushing them onto the higher radio frequency when possible
Support for Power of Ethernet 802.3at means less wires, for cleaner and easier deployment
Stay secure with the latest WPA3 Personal & Enterprise wireless encryption







 






Take a Load Off and Let Your AP do the Hard Work The DAP-X2810’s Load Balancing feature spreads the work load between two or more Access Points to get optimal resource utilization, throughput and response time, while Airtime Fairness helps distribute equal amounts of air time to each connected client. Band Steering auto-connects devices such as smart phones and tablets to the higher-capacity 5 GHz band while allowing devices 2.4 GHz-ready to remain. The result is a steady, consistent connection for each user – the perfect balancing act.



 






 

Product Features:One PoE Gigabit LAN port offers expansive backhaul to your wired network, eliminating bottlenecks at the AP
One RJ45 Console port for debugging
Supports multiple AP modes to ensure performance optimization based on your network’s needs (AP/WDS with AP/WDS)
MAC Address Filtering and WLAN Partitioning ensure ultimate control of your network’s access
Captive Portal with industry-standard authentication for enhanced access management
Works as a standalone AP or as part of a centralized, scalable multi-device deployment






Wi-Fi 6 Hails The End of Slow Business The DAP-X2810 is empowered with next generation Wi-Fi 6. Enhanced MU-MIMO with even more uplink and downlink streams serves more devices simultaneously. OFDMA dramatically increases transmission efficiency and 1024-QAM packs even more data, bringing unadulterated speed increases of a searing 25%.





No-Wait Wi-Fi Even at Peak Time with MU-MIMO Equipped with the latest 802.11ax MU-MIMO technology and 1800 Mbps throughput, delivering exceptional connectivity to more users and devices just got a lot easier. Your network will not balk, even at the busiest of times.





Free Nuclias Connect Remote Centralized Management Software D-Link’s Nuclias Connect is a centralized management and analytics solution that brings convenience, control, customizability and cost-effective scaling to SMB (small-medium-sized business) networks. It enables network monitoring, management, and device configuration through a single, easy-to-use software interface.




The Beating Heart of Your Network At the heart of your network is the DNH-100 Wireless Controller, or ‘The Hub’. It centralizes all aspects of your Access Points’ provisioning and management, allowing them to work together as a team. Features such as self-organizing, self-optimizing and self-healing keep the network performing at its peak.

















Multi-Mode Makes the Most of your Network Capabilities In order to achieve optimal network performance, the DAP-2682 has several operational modes tailored to best fit the individual needs of your network. Access Point, Wireless Client, WDS (Wireless Distribution System), and WDS with Access Point modes allow for flexible, customizable deployment whatever your requirements.


Access Point Add wireless access to your existing wired network.



WDS Wirelessly connect two separate networks.



WDS with AP Wirelessly connect two separate networks while also providing wireless access to both networks.











Product Features: Easy to manage with D-Link’s free software-based management solution, Nuclias Connect
Wi-Fi 6 ready: delivers greater network efficiency and lower latency, with nearly four times the capacity of previous Wi-Fi standards
MU-MIMO slices through congestion, reducing wait time for all users
Superior throughput with dual-band Wi-Fi offers high transfer speeds of up to 1800 Mbps
Coverage is shared more efficiently over more users with Airtime Fairness
Band Steering intelligently manages users, pushing them onto the higher radio frequency when possible
Support for Power of Ethernet 802.3at means less wires, for cleaner and easier deployment
Stay secure with the latest WPA3 Personal & Enterprise wireless encryption







 



Physical Max. Power Consumption 14.7 W by ADP, 16 W by PoE Power Supply 12 V / 2.5 A (optional power adapter), IEEE 802.3at PoE Operating Temperature 0 ?C to 40 ?C / 32 ?F to 104 ?F Temperature (Storage) -20?C to 65 ?C / -4 ?F to 149?F Humidity (Operating) 10% to 90% non-condensing Humidity (Storage) 5% to 95% non-condensing Dimensions 170 x 170 x 33.7 mm / 6.69 x 6.69 x 1.3 in Weight 477.4 g / 1.05 lb General Device Interfaces 1 x RJ45 console port, 1 x 10/100/1000 Ethernet / (PoE) LAN, factory reset, power input LEDs Power / Status Antennas 2 x dual-band internal antennas Antenna Gain 3.2 dBi (2.4 GHz), 4.3 dBi (5 GHz) Maximum Output Power 23 dBm (2.4 GHz), 26 dBm (5 GHz) Data Signal Rate Up to 1800 Mbps Full specification and details can be found in the

The DWL-6610APE Wireless AC1200 Dual-Band Unified Access Point is designed for small to medium businesses and enterprises, providing unparalleled bandwidth and flexibility for medium to large scale Wi-Fi networks. Featuring the latest 802.11ac technology on its 5 GHz band, the DWL-6610APE allows you to deploy more devices and provide greater throughput for your wireless clients..

Features

Ideal for Business

Self-configuring cluster feature
Up to 32 virtual access points may be created from a single access point
Flexible QoS with Wi-Fi Multimedia (WMM)
IEEE 802.3af Power over Ethernet (PoE)
4 external detachable dual-band omnidirectional antennas
UL2043 certified chassis (plenum-rated SKU)
High-Performance Connectivity

Bandsteering for efficient traffic management
One Gigabit Ethernet LAN port
Airtime fairness
Trusted Wireless Security Feature

WPA/WPA2 Personal
WPA/WPA2 Enterprise
MAC address filtering
Rogue AP detection
Greater Reach and Flexibility

The DWL-6610APE provides unparalleled connectivity by using a 2 x 2 antenna implementation with 4 detachable external omnidirectional antennas, allowing high combined data rates of 1167 Mbps2 (867 Mbps for 802.11ac, and 300 Mbps for 802.11n) over the air. With dual-band technology, the DWL-6610APE provides high-performance connections over two bands, so wireless clients can stream media faster and further than before using existing devices Centrally Managed

When working in conjunction with D-Link Unified Controllers, the DWL-6610APE can be centrally managed. This allows for a large number of APs to be deployed and managed easily and efficiently. Once the APs are discovered by the controller, the administrator can push configuration to them as a group, instead of doing so individually. Additionally, Radio Frequency (RF) resource management allows wireless coverage to be managed centrally, proving the best coverage possible for wireless clients. Self-Configuring Cluster

For small businesses that need to deploy multiple APs but lack the resources for complex network management, the DWL-6610APE self-configuring cluster allows a small number of DWL-6610APE access points to be set to form a self-configuring cluster. Once the administrator configures one access point, the same configuration can then be applied to all remaining APs, making setting up your wireless business network a breeze.

Smart Design

he DWL-6610APE can be mounted easily onto any wall or ceiling without looking out of place in an office or home. Enclosed in a plenum-rated UL2043 certified housing, the DWL-6610APE adheres to strict fire codes for placement in air passageways.



Band Steering technology

With band steering, the DWL-6610APE detects whether or not the wireless client is dual-band capable, and if so, it pushes the client to connect to the less congested 5 Ghz band. It does this by actively blocking the client’s attempts to associate with the 2.4 Ghz network.



Versatility Built as standard

Whether you intend to use a single Access Point or roll out a large corporate network, the DWL-6610APE coupled with a D-Link Wireless Controller or Unified Switch makes managing your wireless network simple.



Secure and Green Design

The DWL-6610APE has a wireless scheduler feature, which turns off wireless functionality when it isn’t needed, saving power and increasing network security.

Nuclias Connect AC2300 Wave 2 Access Point

Welcome to Nuclias Connect, D-Link’s centralized management solution for Small-to-Medium-Sized Business (SMB) networks. Nuclias Connect makes it easier to analyze, automate, configure, optimize, scale, and secure your network — delivering the convenience of an Enterprise-wide management solution, at an SMB price.







Product Features: Easy to manage with D-Link’s free centralized management software-based solution Nuclias Connect
Superior throughput with dual-band transfer speeds up to 600 Mbps in the 2.4 GHz band and 1700 Mbps in the 5 GHz band
Band Steering makes sure connected devices get the best available and supported frequency band
Supports Power over Ethernet (802.3at) for simpler installation with less cable clutter
Simple, soft-edge design, ideal for subtle visibility when wall or ceiling mounted (mounting hardware included)
Supports multiple VLANs for enhanced network management and up to 16 SSID setups
Supports WPA2™ - WiFi security for more protection
2 x Gigabit LAN port for high-capacity backhaul to the wired network
Supports multiple AP modes to ensure performance optimization based on your network’s needs
MAC Address Filtering and WLAN Partitioning ensure ultimate control of your network’s access
Captive Portal with industry-standard authentication for enhanced access management
Works as a standalone AP or as part of a centralized, scalable multi-device deployment


Free Nuclias Connect Remote Centralized Management Software D-Link’s Nuclias Connect is a centralized management and analytics solution that brings convenience, control, customizability and cost-effective scaling to SMB (small-medium-sized business) networks. It enables network monitoring, management, and device configuration through a single, easy-to-use software interface.






In a World Where Time is Money, Speed is Essential Increase employee productivity with access to the data they require at combined speeds of up to 2300 Mbps. The DAP-2682 delivers four times the speed of Wireless N by supporting concurrent dual-band performance, while an added Gigabit LAN port allows for high-capacity backhaul to the wired network.





Expand your Network with Endless Scalability Nuclias Connect’s evolving software-based management capabilities allow you to invest in the DAP-2682 confident that as your business expands, your network will, too. Manage up to 1000 Access Points from a single central location, wherever you are, whenever you want.








Industrial Design Redefined Industrial Design Redefined The DAP-2682 is designed with aesthetics in mind. Its fresh white housing blends well into any indoor space, while its soft, rounded corners ensure an elegant integration wherever it’s placed.




Peak Performance and Discreet Deployment with Power over Ethernet (PoE) The DAP-2682’s PoE function allows for easy installation and a simple, clean setup. No need to run extra power lines, no added hassle when configuring your hardwiring and no more cable clutter. Perfect for advanced installations in areas where power outlets are not readily available.





Big Things Start Small Networks big or small all have to start somewhere, with devices sometimes having to take on duties that would not normally be expected of them. For the DAP-2682 that is not a problem since its stand-alone capabilities mean it can take on multiple roles effortlessly. It can be deployed within a small office or classrooms, for example, to create or expand the capacity of a wireless network.




The Beating Heart of Your Network At the heart of your network is the DNH-100 Wireless Controller, or ‘The Hub’. It centralizes all aspects of your Access Points’ provisioning and management, allowing them to work together as a team. Features such as self-organizing, self-optimizing and self-healing keep the network performing at its peak.












Take a Load Off and Let Your AP do the Hard Work The DAP-2682’s Load Balancing feature spreads the workload between two or more Access Points to get optimal resource utilization, throughput and response time, while Airtime Fairness helps distribute equal amounts of air time to each connected client. Band Steering auto-connects devices such as smartphones and tablets to the higher-capacity 5 GHz band while allowing 2.4 GHz-only devices to remain. The result is a steady, consistent connection for each user – the perfect balancing act.



 




Multi-Mode Makes the Most of your Network Capabilities In order to achieve optimal network performance, the DAP-2682 has several operational modes tailored to best fit the individual needs of your network. Access Point, Wireless Client, WDS (Wireless Distribution System), and WDS with Access Point modes allow for flexible, customizable deployment whatever your requirements.


Access Point Add wireless access to your existing wired network.



Wireless Client Add wireless functionality to a device which does not have a Wi-Fi adapter.



WDS Wirelessly connect two separate networks.



WDS with AP Wirelessly connect two separate networks while also providing wireless access to both networks.













Bring free Wi-Fi to Europeans with our WiFi4EU range. In order to promote free Wi-Fi connectivity in public spaces, the European Commission’s WiFi4EU initiative aims to provide EU municipalities with funding for Wi-Fi equipment.



 






Make Every Second Count with Advanced Quality of Service (QoS) Not only does the DAP-2682 delivers reliable wireless performance with maximum wireless signal rates of up to 600 Mbps in the 2.4 GHz band and 1700 Mbps in the 5 GHz band it also enhances your network’s Quality of Service (QoS) by cleverly prioritizing different types of traffic through Wi-Fi Multimedia (WMM™). With the use of QoS, WMM™ ensures that applications such as audio, video and voice, that require better throughput and more performance are placed in order of high-to-low priority for an all-round smoother, uninterrupted Wi-Fi experience.



 



Physical Max. Power Consumption 15.5 W Power Supply External power adapter: 12 V/2.5 A / IEEE 802.3at PoE Operating Temperature 0 to 40 °C / 32 to 104 °F Temperature (Storage) -20 to 65 °C / -4 to 149 °F Humidity (Operating) 10% to 90% non-condensing Humidity (Storage) 5% to 95% non-condensing Dimensions 190 x 190 x 43.7 mm / 7.48 x 7.48 x 1.172 in Weight Without mounting bracket: 5516 g / 12.16 lbs / With mounting bracket: 6052 g / 13.34 oz General Device Interfaces IEEE 802.11a/b/g/n/ac wireless / 2 x Gigabit LAN (PoE supported) Standards IEEE 802.11a/b/g/n/ac2 / IEEE 802.3u/ab / IEEE 802.3az Energy-Efficient Ethernet (EEE) / IEEE 802.3at Power over Ethernet Antennas 4 x internal dual-band antennas - 2 x 3.7 dBi at 2.4 GHz / 2 x 4.8 dBi at 5 GHz Operating Frequency 2.4 GHz band: 2.4 to 2.4835 GHz / 5 GHz band: 5.15 to 5.35 GHz, 5.47 to 5.85 GHz Full specification and details can be found in the

Nuclias Connect AC1200 Wave 2 Outdoor Access Point

Welcome to Nuclias Connect, D-Link’s centralized management solution for Small-to-Medium-Sized Business (SMB) networks. Nuclias Connect makes it easier to analyze, automate, configure, optimize, scale, and secure your network — delivering the convenience of an Enterprise-wide management solution, at an SMB price.




Product Features: Easy to manage with D-Link’s free management software-based solution, Nuclias Connect
Superior throughput with dual-band transfer speeds up to 300 Mbps in the 2.4 GHz band and 867 Mbps in the 5 GHz band
Band Steering makes sure connected devices get the best available frequency band
Supports Power over Ethernet (802.3af) for simpler installation with less cable clutter
Weather Resistant to temperatures between -30 and 60°C
GORE-TEX® Technology repels liquid water while allowing for heat and humidity dissipation
Supports multiple VLANs for enhanced network management and up to 16 SSID setups
Supports WPA2™ - WiFi security for more protection
Gigabit LAN port for high-capacity backhaul to the wired network
Supports multiple AP modes for performance optimization based on your network’s needs
MAC Address Filtering and WLAN Partitioning ensure control of your network’s access
Captive Portal with industry-standard authentication for enhanced access management
Works as a standalone AP or as part of a centralized, scalable multi-device deployment




Free Nuclias Connect Remote Centralized Management Software D-Link’s Nuclias Connect is a centralized management and analytics solution that brings convenience, control, customizability and cost-effective scaling to SMB (small-medium-sized business) networks. It enables network monitoring, management, and device configuration through a single, easy-to-use software interface.





In a World Where Time is Money, Speed is Essential Increase employee productivity with access to the data they require at combined speeds of up to 2300 Mbps. The DAP-2682 delivers four times the speed of Wireless N by supporting concurrent dual-band performance, while an added Gigabit LAN port allows for high-capacity backhaul to the wired network.





Expand your Network with Endless Scalability Nuclias Connect’s evolving software-based management capabilities allow you to invest in the DAP-2682 confident that as your business expands, your network will, too. Manage up to 1000 Access Points from a single central location, wherever you are, whenever you want.





Peak Performance and Discreet Deployment with Power over Ethernet (PoE) The DAP-3666’s PoE function allows for easy installation and a simple, clean setup. No need to run extra power lines, no added hassle when configuring your hardwiring and no more cable clutter. Perfect for advanced installations in areas where power outlets are not readily available.




Big Things Start Small Networks big or small all have to start somewhere, with devices sometimes having to take on duties that would not normally be expected of them. For the DAP-3666 that is not a problem since its stand-alone capabilities mean it can take on multiple roles effortlessly. It can be deployed within a small office or classrooms, for example, to create or expand the capacity of a wireless network.





The Beating Heart of Your Network At the heart of your network is the DNH-100 Wireless Controller, or ‘The Hub’. It centralizes all aspects of your Access Points’ provisioning and management, allowing them to work together as a team. Features such as self-organizing, self-optimizing and self-healing keep the network performing at its peak.















Take a Load Off and Let Your AP do the Hard Work The DAP-2682’s Load Balancing feature spreads the workload between two or more Access Points to get optimal resource utilization, throughput and response time, while Airtime Fairness helps distribute equal amounts of air time to each connected client. Band Steering auto-connects devices such as smartphones and tablets to the higher-capacity 5 GHz band while allowing 2.4 GHz-only devices to remain. The result is a steady, consistent connection for each user – the perfect balancing act.



 







Multi-Mode Makes the Most of your Network Capabilities In order to achieve optimal network performance, the DAP-2682 has several operational modes tailored to best fit the individual needs of your network. Access Point, Wireless Client, WDS (Wireless Distribution System), and WDS with Access Point modes allow for flexible, customizable deployment whatever your requirements.


Access Point Add wireless access to your existing wired network.



Wireless Client Add wireless functionality to a device which does not have a Wi-Fi adapter.



WDS Wirelessly connect two separate networks.



WDS with AP Wirelessly connect two separate networks while also providing wireless access to both networks.











 






Make Every Second Count with Advanced Quality of Service (QoS) Not only does the DAP-2682 delivers reliable wireless performance with maximum wireless signal rates of up to 600 Mbps in the 2.4 GHz band and 1700 Mbps in the 5 GHz band it also enhances your network’s Quality of Service (QoS) by cleverly prioritizing different types of traffic through Wi-Fi Multimedia (WMM™). With the use of QoS, WMM™ ensures that applications such as audio, video and voice, that require better throughput and more performance are placed in order of high-to-low priority for an all-round smoother, uninterrupted Wi-Fi experience.



 



Physical Max. Power Consumption 10.5 W Power Supply External power adapter: 54 V DC +/10% / IEEE 802.3af PoE Operating Temperature -60 to 60 °C / -22 to 140 °F Temperature (Storage) -30 to 65 °C / -22 to 149 °F Humidity (Operating) 10% to 90% non-condensing Humidity (Storage) 5% to 95% non-condensing Dimensions 277 x 240 x50 mm / 10.91 x 9.45 x 1.97 in Weight Without mounting base: 981 g / 2.16 lbs General Device Interfaces 1 x IEEE 802.11a/b/g/n/ac Wave 2 wireless2 / 2 x Gigabit LAN (One supports PoE) Standards IEEE 802.11a/b/g/n/ac2 / IEEE 802.3i/u/ab / IEEE 802.3az Energy-Efficient Ethernet (EEE) / IEEE 802.3af Power over Ethernet Antennas 4 x internal dual-band - 7 dBi at 2.4 GHz / 6 dBi at 5 GHz Operating Frequency 2.4 GHz band: 2.4 to 2.4835 GHz / 5 GHz band: 5.15 to 5.35 GHz, 5.47 to 5.85 GHz Full specification and details can be found in the

Manage your business network with ease

The DIS-2650AP can work as a standalone device but can also work with Nuclias Connect - a free software-based management platform (with optional hardware controller) that can be used on-premises, or as a cloud solution hosted on a public cloud service. Admin tasks can be swiftly carried out from the Nuclias Connect app, or server/PC-based software for easy access, easy automation, and easy network scalability.

Key Features

Dual-band AC1200 speeds: 300 Mbps on 2.4 GHz, 867 Mbps on 5 GHz.
Wide operating temperature range of -20 to 65°C
Built-in 2 kV surge protection and 15kV ESD protection
Redundant dual DC power input
Power over Ethernet (802.3at) support
2 x Gigabit LAN ports
Standalone, or use with free Nuclias Connect management software or dedicated Nuclias Connect Hub

Built tough, for tough environments

Wide operating temperature range with built-in 2kV surge protection and 15kV ESD protection

Flexible DIN or wall mountable

For increased flexibility in varied working environments, it can be mounted on a DIN rail or wall-mounted

Flexible power input

Powered via Power over Ethernet (802.3at PoE) or redundant dual DC input

Easy to scale up

The free Nuclias Connect management software controller allows you to scale up the network by up to 1,000 access points

Easily manage your network with Nuclias Connect

Automate, monitor, manage and scale your network in line with business demand without the complexity or cost, through the centrally managed Nuclias Connect platform.

Reliable, secure performance

Fast throughput with dual-band, MIMO technology, band steering & airtime fairness intelligently manages users with WPA2 wireless encryption

Hassle-free admin tasks

Empower admins to work efficiently, even across multiple sites. Deploy, configure, update and expand rapidly.

Free-to-download software & app

Rapidly setup, manage and monitor APs locally via our free network management software, or remotely with the Nuclias Connect app






Strong, reliable performance for your business

The DIS-2650AP delivers reliable, high-speed wireless AC Wave 2 performance with maximum combined wireless signal rates of up to 1200Mbps1, with x2 Gigabit LAN ports for high-capacity backhaul to the wired network.

It also supports multiple VLANs for enhanced network management, x16 SSID setups, MAC Address filtering, WLAN partitioning, and utilises WPA2 Wi-Fi security for enhanced network protection.




Seamless and self-sufficient networking

It employs band steering, MU-MIMO and beamforming - all designed to work together to alleviate congestion by automatically routing devices based on Internet usage, so your network won’t be slowed down by devices performing intense tasks.

This access point also supports Load Balancing and Airtime Fairness technology to distribute workloads between other APs for optimum resource utilisation, allowing every device in your network to seamlessly get the best connectivity possible — without putting a strain on your whole network.




Durable and Reliable Design

The DIS-2650AP is housed in a rugged metal casing to protect itself from harsh environmental conditions and supports a wide operating temperature range of -20 to 65°C.

For increased flexibility in harsh environments, the DIS-2650AP can be mounted on a DIN rail or wall-mounted and the option to be powered via Power over Ethernet (802.3at PoE) or by dual DC input.




Built to work, made to last

The built-in 2kV surge protection and 15KV ESD protection ensure continuous operation in unexpected electric surges or discharges.




Multiple Operation Modes

The DIS-2650AP can be configured to fit the needs of your network and optimise performance.

Access point
Wireless distribution system (WDS) with access point
WDS/bridge (no AP broadcasting)
Wireless client



Advanced and customisable on-premise network management.

Nuclias Connect is a unified network management tool with cost-effective scalability, powerful controls, and is designed as a solution for every type of business.




Minimise the hassle of deployments, configurations and admin tasks.

Compared to traditional hardware-based unified management systems, Nuclias Connect offers tremendous flexibility.

Easy setups, remote access and an intuitive dashboard make life easier for network admins, while functionality and network self-healing tools such as airtime fairness, localised throttling and load-balancing improves overall user experience.




Get your networks up and running from anywhere, easily and quickly.

Network administrators can set different configurations and authority levels for head and branch offices. Network devices can be pre-configured before being dispatched to regional offices, allowing rapid deployments, replacements or scaling.

The solution also enables Managed Service Providers to send pre-configured APs to their customers and remotely manage their wireless networks.




Manage your business network, like never before.

Nuclias Connect enables you to manage and control your network from anywhere with an Internet connection. It provides an extensive understanding of your network and its users through traffic analytics and status reports, which can be viewed at a glance through an intuitive interface on PC, or phone via our app.

Insights derived from this traffic data can be used to create business value, and traffic can be viewed across the entire network, to the level of a single AP.




Scale your Wi-Fi alongside your business

The free Nuclias Connect centralised management software gives you the flexibility to scale up the network to up to 1,000 APs

Enjoy Faster Business with Wave 2

The Wireless AC2200 Wave 2 Tri-Band Unified Access Point is specially designed for small to medium businesses or enterprises, providing unparalleled bandwidth and flexibility for administrators looking to deploy a medium to large scale Wi-Fi network. It can operate as a standalone access point as well as be centrally managed by D-Link’s Unified Wireless Controllers. The DWL-7620AP can be ceiling mounted or wall mounted to provide the best wireless coverage. For additional flexibility, it comes with integrated Power over Ethernet (PoE) support, allowing the access point to be installed in areas where power outlets are not readily available.

AC2200 Wave 2

Combined wireless speeds of up to 2.2 Gbp* with 802.11ac Wave 2 technology Tri-Band Wi-Fi

Improved throughput and coverage with three bands. Reduces co-channel interference, bringing more reliability in high-density areas.. 802.11k Fast Roaming1

IAllows wireless clients to move freely, jumping from AP to AP without losing connectivity. Automatic Radio Frequency (RF) Management

Greatly reduces RF interference and enables denser AP deployments Centrally Managed

Used as a standalone wireless access point, self-configuring cluster or managed centrally via a D-Link Wireless Controller
Greater Speeds and Reliable Connectivity

Combined wireless speeds of up to 2,200 Mbps* over 3 wireless bands for improved business network speeds.


Wired link aggregation2 allows two Gigabit Ethernet ports to be linked together and act as a single port doubling the access point’s available bandwidth and maximising the overall throughput.

Increase Network Efficiency

With support for MU-MIMO (Multi-User Multiple Input Multiple Output), the DWL-7620AP simultaneously communicates with multiple clients using multiple antennas. This allows the access point to utilise the spectrum more efficiently and significantly increase the network capacity. The 2 x 2 MU-MIMO takes full advantage of all streams to serve more wireless clients, dramatically improving wireless performance.




Rapid Deployments

It can be ceiling mounted or wall mounted to provide the best wireless coverage. The built-in Power over Ethernet (PoE) port makes deployments faster and means it can be installed in areas without power outlets.

Robust Management

When working in conjunction with D-Link Unified Wireless Controllers (DWC-1000, and DWC-2000), multiple DWL-8620AP units in the Wi-Fi network can be easily and efficiently centrally managed.

Automatic Radio Frequency (RF) Management

Radio Frequency (RF) resource management1 allows wireless coverage to be managed automatically, providing the best possible coverage for wireless clients.

When access points are deployed in close proximity to each other, there may be interference between channels if RF management is not implemented. When the DWL-8620AP senses a neighbouring AP nearby, it will automatically select a non-interfering channel.

This greatly reduces RF interference and allows you to deploy APs more densely. To further minimise interference, when a nearby AP is on the same channel, the DWL-8620AP will automatically adjust its transmission power1. If an AP goes down, others will increase their transmission power to expand coverage.

Band Steering

It places clients on the optimal wireless band to avoid congestion and allows for smooth streaming of video, seamless browsing, and fast downloads speeds.

Airtime Fairness
Ensures equal airtime given to each client. Increases performance even if slower devices are connected.

802.11k Fast Roaming1
Allows the wireless client to roam seamlessly between access points.

802.1p Quality of Service (QoS)
Supports 802.1p QoS for enhanced throughput and better performance of time-sensitive traffic like VoIP and streaming DSCP.

Wi-Fi Multimedia (WMM)
In the event of network congestion, time-sensitive traffic can be given priority ahead of other traffic.


*Maximum wireless signal rate derived from IEEE standard 802.11n and 802.11ac specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors may adversely affect wireless signal range.
1. This feature is available when Unified AP is used in conjunction with D-Link’s line of Unified Wireless Controllers.
2. Support static Link Aggregation (LAG).

Nuclias Connect AX3600 Wi-Fi Access Point

The Wi-Fi 6 ready DAP-X2850 is on hand to provide unbeatable speeds, greatly increased capacity and interference-free coverage throughout businesses, paired with the easy management of Connect.




Product Features: Easy to manage with D-Link’s free software-based management solution, Nuclias Connect
Wi-Fi 6 ready: delivers greater network efficiency and lower latency, with nearly four times the capacity of previous Wi-Fi standards
MU-MIMO slices through congestion, reducing wait time for all users
Superior throughput with dual-band Wi-Fi offers high transfer speeds
Coverage is shared more efficiently over more users with Airtime Fairness
Band Steering intelligently manages users, pushing them onto the higher radio frequency when possible
Two LAN ports (2.5 Gbps and 1 Gbps) offer expansive backhaul up to wired network, eliminating bottlenecks at the AP
Support for Power of Ethernet 802.3at means less wires, for cleaner and easier deployment
Stay secure with the latest WPA3 Personal & Enterprise wireless encryptio







 



Take a Load Off and Let Your AP do the Hard Work The DAP-X2810’s Load Balancing feature spreads the work load between two or more Access Points to get optimal resource utilization, throughput and response time, while Airtime Fairness helps distribute equal amounts of air time to each connected client. Band Steering auto-connects devices such as smart phones and tablets to the higher-capacity 5 GHz band while allowing devices 2.4 GHz-ready to remain. The result is a steady, consistent connection for each user – the perfect balancing act.



 






 




Product Features:Supports multiple AP modes to ensure performance optimization based on your network’s needs
MAC Address Filtering and WLAN Partitioning ensure ultimate control of your network’s access
Captive Portal with industry-standard authentication for enhanced access management
Works as a standalone AP or as part of a centralized, scalable multidevice deployment







 



Wi-Fi 6 Hails The End of Slow Business The DAP-X2810 is empowered with next generation Wi-Fi 6. Enhanced MU-MIMO with even more uplink and downlink streams serves more devices simultaneously. OFDMA dramatically increases transmission efficiency and 1024-QAM packs even more data, bringing unadulterated speed increases of a searing 25%.





No-Wait Wi-Fi Even at Peak Time with MU-MIMO Equipped with the latest 802.11ax MU-MIMO technology and 1800 Mbps throughput, delivering exceptional connectivity to more users and devices just got a lot easier. Your network will not balk, even at the busiest of times.





Your Network, Future Proofed Equipped with a 2.5 Gigabit Ethernet Port, the DAP-X2850 delivers exceptional multi-gigabit performance to support demand for better and faster Wi-Fi. Compatibility with standard 802.3at PoE+ is ideal for flexible deployment. No need to run extra power lines, no added hassle when configuring your hardwiring and no more cable clutter. Perfect for advanced installations in areas where power outlets are not readily available.






Free Nuclias Connect Remote Centralized Management Software D-Link’s Nuclias Connect is a centralized management and analytics solution that brings convenience, control, customizability and cost-effective scaling to SMB (small-medium-sized business) networks. It enables network monitoring, management, and device configuration through a single, easy-to-use software interface.





The Beating Heart of Your Network At the heart of your network is the DNH-100 Wireless Controller, or ‘The Hub’. It centralizes all aspects of your Access Points’ provisioning and management, allowing them to work together as a team. Features such as self-organizing, self-optimizing and self-healing keep the network performing at its peak.













Multi-Mode Makes the Most of your Network Capabilities In order to achieve optimal network performance, the DAP-2682 has several operational modes tailored to best fit the individual needs of your network. Access Point, Wireless Client, WDS (Wireless Distribution System), and WDS with Access Point modes allow for flexible, customizable deployment whatever your requirements.


Access Point Add wireless access to your existing wired network.



WDS Wirelessly connect two separate networks.



WDS with AP Wirelessly connect two separate networks while also providing wireless access to both networks.











 



Physical Max. Power Consumption 19.44 W Power Supply 12 V / 2.5 A (optional power adapter), IEEE 802.3at PoE Operating Temperature 0 ?C to 40 ?C / 32 ?F to 104 ?F Temperature (Storage) -20?C to 65 ?C / -4 ?F to 149?F Humidity (Operating) 10% to 90% non-condensing Humidity (Storage) 5% to 95% non-condensing Dimensions 212.4 x 212.4 x 46.7 mm / 8.36 x 8.36 x 1.8 in Weight 763.8 g / 1.7 lb General Device Interfaces 1 x RJ45 console port, 1 x 2.5 Gbps Ethernet / LAN (PoE), 1 x 10/100/1000 Mbps Ethernet / LAN, factory reset, power input LEDs Power / Status Antennas 4 x internal Antenna Gain 3.5 dBi (2.4 GHz), 5.5 dBi (5 GHz) Maximum Output Power 28 dBm (2.4 GHz), 25.5 dBm (5 GHz) Data Signal Rate Up to 3600 Mbps Full specification and details can be found in the

The DWL-6620APS Wireless AC1300 Wave 2 Unified Access Point is designed for small to medium businesses and enterprises, as well as high-density public areas, providing greater throughput and flexibility for medium to large-scale Wi-Fi networks. Featuring D-Link Smart Antenna technology, the DWL-6620APS allows your wireless clients to enjoy an unprecedented Wi-Fi experience and reliable connection.

Features

Ideal for Business Can be centrally managed by D-Link Wireless Controllers (DWC-1000/DWC-2000)
Up to 32 virtual access points may be created from a single access point
Flexible QoS with Wi-Fi Multimedia (WMM)
IEEE 802.3at Power Over Ethernet (PoE) enables installation in hard to reach locations
UL2043 certified housing
High-Performance Connectivity

Smart Antenna technology
MU-MIMO technology increases wireless network capacity and overall throughput
Bandsteering for efficient traffic management
Two Gigabit Ethernet LAN ports supporting Link Aggregation
Airtime fairness
Wave 2 has landed. Connect to more.

Unparalleled performance makes the DWL-6620APS Wireless AC1300 Wave 2 Unified Access Point a must-have upgrade that allows your wireless customers in high-density areas to reliably connect to more, with faster throughput and flexibility. Perfect for medium to large-scale Wi-Fi networks.

Faster Performance 802.11k Fast Roaming D-Link Smart Antenna   Combined wireless speeds of up to 1.3 Gbps* with 802.11ac Wave 2 technology   Allows wireless clients to move freely, jumping from AP to AP without losing connectivity.   Improved throughput and coverage by reducing co-channel interference, bringing more reliability in high-density areas. Band steering Smart, secure & green Limited Lifetime Warranty   Automatically handles busy traffic so the fastest, least congested band is used by each client.   The wireless scheduler feature, which turns off wireless functionality when it isn’t needed, saves power and increases network security.   Register and you’re fully protected with limited lifetime warranty support from one of the global leaders in the industry. Smart Antenna Technology

D-Link’s Smart Antenna technology processes algorithms used to identify spatial signal signatures such as Direction Of Arrival, and uses them to calculate beamforming vectors which are then used to target the wireless client and achieve the best possible throughput.

The fast channel selection feature scans all channels and rapidly selects the one with the least interference. And the Null Steering capability curtails the power in the direction of interference to mitigate its influence. With these capabilities the D-Link Smart Antenna strengthens the connection reliability in real-time and delivers an optimised wireless user experience.

Greater Speed & Connectivity

It provides unparalleled connectivity by using the 802.11ac Wave 2 standard. High combined data rates of 1267 Mbps (867 Mbps for 802.11ac and 400 Mbps for 802.11n) can be delivered over the air and Wi-Fi Multimedia (WMM) together with 802.1p Quality of Service (QoS) can give time-sensitive traffic like Voice over IP (VoIP) or video streaming a higher priority ahead of other traffic.

Efficiency multiplied

Support for 802.11ac Wave 2 MU-MIMO technology enables the access point to communicate with multiple clients simultaneously, resulting in significantly improved network capacity and throughput.

Dual-Band Wireless for efficient performance

The 2.4 GHz and high-speed 5 GHz AC channels and band steering technology makes your business network flexible by automatically placing clients on the optimal band for their needs like casual web browsing, and data-hungry operations like video streams and large file transfers.

Airtime fairness ensures that equal airtime is given to each client, providing improved performance even when slower devices are connected. Centrally Manage your Wireless Network

When deployed in combination with D-Link Wireless Controllers (DWC-1000/DWC-2000), up to 1,024 DWL-6620APS access points can be centrally managed. Once the APs are discovered by the controller, any configuration can be pushed to them as a group, instead of doing so individually. Additionally, Radio Frequency (RF) resource management allows wireless coverage to be managed centrally, providing the best coverage possible for wireless clients.

Enjoy Faster Business with Wave 2

The DWL-8620AP is designed for medium to large-scale Wi-Fi networks, delivering fast Wave 2 wireless speeds. It’s highly manageable, it fits into any existing network, and can be scaled to meet future wireless demands.

AC2500 Wave 2

Combined wireless speeds of up to 2.5 Gbp2 with 802.11ac Wave 2 technology Dual-Band Wi-Fi

Two bands to improve throughput and coverage. Reduces co-channel interference. 4 x 4 MU-MIMO

Improved efficiency in handling throughput distribution to multiple devices connected to the network Automatic Radio Frequency (RF) Management

Greatly reduces RF interference and enables denser AP deployments 802.11k Fast Roaming

Allows wireless clients to move freely, jumping from AP to AP without losing connectivity. Centrally Managed

Used as a standalone wireless access point, self-configuring cluster or managed centrally via a D-Link Wireless Controller
Greater Speeds and Reliable Connectivity

Utilise the full potential of 802.11ac Wave 2. Provide faster connectivity with combined data rates of up to 2.5 Gbps2.


It also supports Link Aggregation, which allows two Gigabit Ethernet ports to be linked together to act as a single port to double the available bandwidth and maximise the access point’s overall throughput.

Increase Network Efficiency

The DWL-8620AP’s 4 x 4 MU-MIMO takes full advantage of all streams to serve more wireless clients, dramatically improving wireless performance.


MU-MIMO (Multi-User Multiple Input Multiple Output) simultaneously communicates with multiple clients using multiple antennas. This allows the access point to utilise the spectrum more efficiently and significantly increase the network capacity.

Rapid Deployments

It can be ceiling mounted or wall mounted to provide the best wireless coverage. The built-in Power over Ethernet (PoE) port makes deployments faster and means it can be installed in areas without power outlets.

Robust Management

When working in conjunction with D-Link Unified Wireless Controllers (DWC-1000, and DWC-2000), multiple DWL-8620AP units in the Wi-Fi network can be easily and efficiently centrally managed.

Automatic Radio Frequency (RF) Management

Radio Frequency (RF) resource management1 allows wireless coverage to be managed automatically, providing the best possible coverage for wireless clients.

When access points are deployed in close proximity to each other, there may be interference between channels if RF management is not implemented. When the DWL-8620AP senses a neighbouring AP nearby, it will automatically select a non-interfering channel.

This greatly reduces RF interference and allows you to deploy APs more densely. To further minimise interference, when a nearby AP is on the same channel, the DWL-8620AP will automatically adjust its transmission power1. If an AP goes down, others will increase their transmission power to expand coverage.

Band Steering

It places clients on the optimal wireless band to avoid congestion and allows for smooth streaming of video, seamless browsing, and fast downloads speeds.

Airtime Fairness
Ensures equal airtime given to each client. Increases performance even if slower devices are connected.

802.11k Fast Roaming
Allows the wireless client to roam seamlessly between access points.

802.1p Quality of Service (QoS)
Supports 802.1p QoS for enhanced throughput and better performance of time-sensitive traffic like VoIP and streaming DSCP.

Wi-Fi Multimedia (WMM)
In the event of network congestion, time-sensitive traffic can be given priority ahead of other traffic.

The D-Link DWC-1000 Wireless Controller is a centralised wireless LAN manager developed specifically for campuses, branch offices, and businesses that are looking for an easy to use, scalable solution to manage and configure their wireless network. With the ability to manage up to six wireless Access Points (upgradable to 24) and a maximum of 96 wireless Access Points in a Controller Cluster, the DWC-1000 is a cost-effective mobility solution for small to medium-scale environments. Its auto-managed AP discovery and single point management allow customers to acquire an enterprise class system without the burden of executing massive and complex configurations. With a robust and comprehensive security detection system, the DWC-1000 also enables managed APs to block potential attacks from unauthorised users and devices, especially for wireless environments.

Next-Generation Wi-Fi 6

The AX3600 Wi-Fi 6 Dual-Band Unified Access Point brings the latest Wi-Fi technology to small-to-medium-sized businesses as well as larger enterprises. It's part of D-Link's Unified Wireless solution that allows companies to set up a highly scalable, flexible and manageable Wi-Fi network.

Key Features

802.11ax Wi-Fi CERTIFIED 6™, Dual-Band, up to 3.6 Gbps
4x4 MU-MIMO internal omnidirectional antennas
Self-optimising, self-healing, Fast Roaming with wireless controller
Link Aggregation with 2.5G and Gigabit ports
Limited Lifetime Warranty with registration

Wi-Fi 6

Next-generation 802.11ax Wi-Fi CERTIFIED 6™ technology provides increased speed, capacity and the latest WPA3 security.

4 x 4 MU-MIMO

Improved efficiency in handling throughput distribution to multiple devices connected to the network.

Dual-Band with band steering

Two bands to improve throughput and coverage as well as reduces co-channel interference.

Fast roaming

Allows wireless clients to move freely, jumping from AP to AP without losing connectivity.

PoE & flexible installation

Power the device over Ethernet without the need for nearby power outlets with the option for ceiling or wall mounting.

Centrally Managed

Used as a standalone wireless access point or managed centrally via a D-Link Wireless Controller.

Self-healing

Set up a robust and resilient wireless network that can automatically heal itself when an AP fails.

Limited Lifetime Warranty & Next Day Service

Register to enjoy D-Link Limited Lifetime Warranty support, with complimentary next business day advance replacement service included.






Take Your Business to the Next Level with Wi-Fi 6

Uses the latest Wi-Fi technology to deliver reliable wireless performance and reduce congestion, with combined maximum wireless signal rates of up to 3.6 Gbps (1147 Mbps on 2.4 GHz band and 2402 Mbps on 5 GHz band).

Together with OFDMA and MU-MIMO support, the DWL-X8630AP gives your business a faster wireless network with higher capacity and efficiency.

Band steering
MU-MIMO
Airtime Fairness
802.11k Fast Roaming



Flexible Installation

Power-over-Ethernet support allows the DWL-X8630AP to be connected and powered using a single cable, so it can be installed in areas without power outlets.




Highly Scalable and Centrally Managed

The DWL-X8630AP can be used as a single access point or as part of a centrally managed wireless network with up to 1,024 access points when deployed with D-Link Unified Wireless Controllers.




Self-Healing and Resilient

When working in conjunction with D-Link Unified Wireless Controllers, you can create a network that automatically heals itself when an access point or controller fails, allowing your business to stay online.




Self-Optimised Network

Automatic radio frequency (RF) management provides the best possible coverage for wireless clients by reducing interference when access points are deployed close to each other. When the DWL-X8630AP senses a neighbouring AP nearby, it will automatically select a non-interfering channel.

This significantly reduces RF interference and allows you to deploy APs more densely. To further minimise interference, when a nearby AP is on the same channel, the DWL-X8630AP will automatically adjust its transmission power.




D-Link is officially Wi-Fi Certified by the Alliance

The Wi-Fi CERTIFIED 6™ seal is a declaration of having passed a series of rigorous tests performed by the Wi-Fi Alliance - an internationally recognised organisation. It's only granted to products that adhere to the strict industry-agreed standards for interoperability.

With this, purchasing a D-Link Wi-Fi CERTIFIED 6™ device ensures increased speeds, advanced Wi-Fi 6 capability, backwards compatibility and improved security.




Free Next-Business-Day Service

Enjoy our free Next Business Day service, as standard, to replace faulty equipment quickly.

Our rapid-response technical support is designed to ensure businesses get the best support for their unique environment. Our extended warranty and enhanced service packages increase the lengths of warranties and further minimises downtime. You can even opt for our Same Business Day Service which guarantees the delivery of the replacement product within 4 hours of confirmation of product failure.

AC1200 802.11ac Wave 2 Industrial Outdoor Access Point

Industrial-grade specs and capabilities empower the DIS-3650AP to provide mission-critical connectivity in harsher outside environments and industries.

Superior speeds and throughput with dual-band 802.11ac Wave 2 Wi-Fi, offering speeds of up to 1200 Mbps
2x2 MU-MIMO better handles multiple devices & sensors and enhances capacity
1x Gigabit Ethernet LAN (PoE supported), 1x Console Port, and Wi-Fi signal strength indicator
Airtime Fairness, Band Steering and Fast Roaming greatly optimize connectivity for connected devices
Supports WPA3 Encryption for more protection
IP-67-rated dust-tight and water-resistant metal housing
Easy to manage with D-Link’s free software-based management solution, Nuclias Connect
Broad temperature tolerance of -20 to 65?
Pole or Wall Mounting and also support DIN Rail mounting
Enter The Connectivity Fast Lane

Empowered by 802.11ac Wave 2 Wi-Fi and boasting high-power external antennas, the DIS-3650AP provides triple the speeds of legacy 802.11n devices. It easily surpasses the Gigabit hurdle with dual-band speeds of up to 1200 Mbps, and meanwhile, the indispensable MU-MIMO feature handles more data sources simultaneously, essential in any device or sensor-dense area.

An Industrial AP That Comes Fully Equipped

The DIS-3650AP can hit the ground running with its fully equipped interface: two high-power dual-band antennas ensure fast and far-reaching outdoor coverage. Meanwhile, the Gigabit LAN port, with support for PoE offers a stable wired backhaul connection.

Designed with Resilience, Built to Last

The Strong and well-screwed metal casing boasts an impressive IP67 rating, protecting it from the typical hazards in industrial areas. Furthermore, it ensures total protection from harmful dust and high resistance against water. Wide temperature tolerance of -20 to 65? keeps mission-critical data flowing even in the heat of the summer or the coldest of winters.

D-Link's DWC-2000 Unified Wireless Controller is a cost-effective wireless management solution suitable for large Access Point deployments. Capable of managing 64 Unified Wireless Access Points Out of the box, it provides a Reliable, Secure, Self-Healing, Scalable wireless network suitable for education, hospitality and businesses of any size. Features:

Self-healing and self-optimising technology combined with 4+4 wireless controller redundancy and RF scanning ensures reliability and performance
Features such as account generation, ticket issuance, user monitoring and session extension simplifies guest wireless network management
To meet evolving network demands, access point management can be upgraded from 64 to 256 APs per controller
Business Benefits:
Simplified wireless LAN management enhanced user experience
Segment guest and corporate access with multiple SSIDs, Guest Captive Portal, and standard based VLAN configurations
Free Integrated Payment Gateway
Optimise network with automatic RF channel settings and adjustments of AP output power setting 
D-Link Managed Wireless Big company wireless at small company prices. With a wide selection of Access Points and technologies, D-Link’s Wireless Solution is the perfect choice for any business.


A Power LED B Fan LED C USB Ports to Upgrade Firmware and export configuration D Gigabit LAN SFP ports (1-4) E Gigabit LAN RJ-45 ports (1-4) F Console/Management Port Centralised Monitoring and Management Whether you intend to use a single Access Point or roll out a large corporate network, all compatible D-Link Unified Wireless Access Points* can be managed using a D-Link Wireless Controller.



Functionality without Complexity Simplified and Intuitive GUI with integrated configuration wizards make deployment and monitoring a simple task.



Integrated Payment Gateway Monetising your wireless investment is simple using the integrated payment gateway.
D-Link’s Family of Wireless Controllers enable you to charge for Wireless access by using one of the integrated payments services making PCI-DSS compliance easy. Self-Healing Wireless With D-Link’s Self-Healing Wireless network, the Wireless Controller can detect if a surrounding access point has failed and boost their power output to compensate for the failure, minimising the effect of the failed AP. Scalability The ideal solution for businesses of any size, starting with just 8 Access Points and scaling to support 1024 APs in a clustered configuration. The DWC-2000 is the perfect solution for any business looking to enhance their wireless network with the minimal service disruption.
With an extensive range of D-Link Unified Access Points and simplified management and monitoring tools the DWC-2000 is deployable anywhere, across any geography.

Fast Seamless Roaming Combining a Unified Access Point with a DWC-2000 Unified Wireless Controller enables you to create a wireless network that enables roam around a building or even outside without losing effecting your video call.





* Selected D-Link Access Points Only

Wireless AC2600 Wave 2 Dual-Band Unified Access Point



Product Highlights Next Generation Connectivity

Features next-generation 802.11ac Wave 2 technology to deliver a reliable wireless connection at unparalleled combined speeds

Unparalleled Performance

Experience smooth and stable performance with a powerful CPU, band steering, and Airtime Fairness to ensure that every client has equal access to air time

Optimised Wireless Experience

MU-MIMO and dual-band technology provide optimal wireless experience in high-density environments

The DWL-8620AP Wireless AC2600 Wave 2 Dual-Band Unified Access Point is specially designed for small to medium businesses or enterprises, providing unparalleled bandwidth and flexibility for administrators looking to deploy a medium to large scale Wi-Fi network utilising the cutting-edge speed of Wireless AC Wave 2. Not only can it operate in standalone mode, the DWL-8620AP can also be centrally managed by D-Link Wireless Controllers. Highly manageable and capable of blazing speeds, it integrates seamlessly into any existing network infrastructure and can be easily scaled to meet future demands.




AC2500 Wave 2
Combined wireless speeds of up to 2.5 Gbp2 with 802.11ac Wave 2 technology



Dual-Band Wi-Fi
Two bands to improve throughput and coverage. Reduces co-channel interference.



4 x 4 MU-MIMO
Improved efficiency in handling throughput distribution to multiple devices connected to the network

 


Automatic Radio Frequency (RF) Management
Greatly reduces RF interference and enables denser AP deployments.



802.11k Fast Roaming
Allows wireless clients to move freely, jumping from AP to AP without losing connectivity.



Centrally Managed
Used as a standalone wireless access point or managed centrally via a D-Link Wireless Controller.

 


Enjoy Faster Business with Wave 2 The DWL-8620APE is designed for medium to large-scale Wi-Fi networks, delivering fast Wave 2 wireless speeds. It’s highly manageable, it fits into any existing network, and can be scaled to meet future wireless demands.



 





Features Ideal for Businesses

• Multiple virtual access points can be created from a single access point

• Flexible QoS with WMM

• Power over Ethernet enables installation in hard to reach locations

• UL2043-certified chassis (Plenum-rated SKU)

High-Performance Connectivity

• Supports 160 MHz channel for doubled capacity

• Band steering for efficient traffic management

• Airtime Fairness

• 802.11k Fast Roaming

• Supports Link Aggregation

Trusted Wireless Security Features

• WPA/WPA2 Personal

• WPA/WPA2 Enterprise

• MAC address filtering

• Rogue AP detection

 



Greater Speeds and Reliable Connectivity The DWL-8620AP leverages the full potential of 802.11ac Wave 2 to provide unparalleled connectivity with ultra-high combined data rates of up to 2,533 Mbps2. In addition, it supports Link Aggregation, which allows two Gigabit Ethernet ports to be linked together and act as a single port to double the available bandwidth and maximise the overall throughput of the access point.



 



Increase Network Efficiency The DWL-8620APE’s 4 x 4 MU-MIMO takes full advantage of all streams to serve more wireless clients, dramatically improving wireless performance.

MU-MIMO (Multi-User Multiple Input Multiple Output) simultaneously communicates with multiple clients using multiple antennas. This allows the access point to utilise the spectrum more efficiently and significantly increase the network capacity.






Rapid Deployments It can be ceiling mounted or wall mounted to provide the best wireless coverage. The built-in Power over Ethernet (PoE) port makes deployments faster and means it can be installed in areas without power outlets.



 





Robust Management When working in conjunction with D-Link Unified Wireless Controllers (DWC-1000, and DWC-2000), multiple DWL-8620APE units in the Wi-Fi network can be easily and efficiently centrally managed.



 





Automatic Radio Frequency (RF) Management Radio Frequency (RF) resource management1 allows wireless coverage to be managed automatically, providing the best possible coverage for wireless clients.

When access points are deployed in close proximity to each other, there may be interference between channels if RF management is not implemented. When the DWL-8620APE senses a neighbouring AP nearby, it will automatically select a non-interfering channel.

This greatly reduces RF interference and allows you to deploy APs more densely. To further minimise interference, when a nearby AP is on the same channel, the DWL-8620APE will automatically adjust its transmission power. If an AP goes down, others will increase their transmission power to expand coverage.



 





Band Steering It places clients on the optimal wireless band to avoid congestion and allows for smooth streaming of video, seamless browsing, and fast downloads speeds.

Airtime Fairness

Ensures equal airtime given to each client. Increases performance even if slower devices are connected.

802.11k Fast Roaming

Allows the wireless client to roam seamlessly between access points.

802.1p Quality of Service (QoS)

Supports 802.1p QoS for enhanced throughput and better performance of time-sensitive traffic like VoIP and streaming DSCP.

Wi-Fi Multimedia (WMM)

In the event of network congestion, time-sensitive traffic can be given priority ahead of other traffic.



 






Free Next-Business-Day Service Enjoy our free Next Business Day service, as standard, to replace faulty equipment quickly.

Our rapid-response technical support is designed to ensure businesses get the best support for their unique environment. Our extended warranty and enhanced service packages increase the lengths of warranties and further minimises downtime. You can even opt for our Same Business Day Service which guarantees the delivery of the replacement product within 4 hours of confirmation of product failure.