Entry-level cloud-managed 802.11ac wireless
Dual-band, 802.11ac Wave 2 ruggedized access point delivering basic enterprise wireless for outdoor or low-density deployments
The Cisco Meraki MR70 is a dual-radio, cloud-managed 2x2:2 802.11ac Wave 2 access point with MU-MIMO support. Designed for basic, best-effort deployments that require rapid installation, the MR70 provides enterprise-grade security and simple management in a ruggedized, IP67-rated form factor that sports integrated omni-directional antennas.
The MR70 is ideal for municipal athletic fields, garages, public gardens, space-constrained outdoor deployments, and even rapid-response emergency kits designed to quickly deliver wireless in disaster-struck areas. The MR70 provides a maximum 1.3 Gbps* aggregate frame rate with concurrent 2.4 GHz and 5 GHz radios.
The MR70 is managed through the Meraki cloud, with an intuitive browser-based interface that enables rapid deployment without training or certifications. Because the access point is monitored 24x7 by the Meraki cloud, the MR70 can deliver real-time alerts if the network encounters problems, and diagnostic tools enable real-time troubleshooting over the web. The MR70's firmware is always kept up to date from the cloud. New features, bug fixes, and enhancements are delivered seamlessly over the web, meaning no manual software updates to download or missing security patches to worry about.
Main Features
Aggregate data rate of up to 1.3 Gbps
A 5 GHz 2x2:2 radio supporting 80 MHz channel widths and a 2.4 GHz 2x2:2 radio supporting 40 MHz channel widths offer a combined dual-radio aggregate frame rate of 1.3 Gbps*, with up to 866 Mbps in the 5 GHz band thanks to 802.11ac Wave 2 and 400 Mbps in the 2.4 GHz band.
Multi User Multiple Input Multiple Output (MU-MIMO)
With support for the 802.11ac Wave 2 standard, the MR70 offers MU-MIMO for more efficient transmission to multiple clients. This increases the total network performance and the improves the end user experience.
Integrated enterprise security and guest access
The MR70 features integrated, easy-to-use security technologies to provide secure connectivity for employees and guests alike. Advanced security features such as AES hardware-based encryption and WPA2-Enterprise authentication with 802.1X provide wire-like security while still being easy to configure.
Application-aware traffic shaping
The MR70 includes an integrated Layer 7 packet inspection, classification, and control engine, enabling you to set QoS policies based on traffic type. Prioritize your mission critical applications, while setting limits on recreational traffic, e.g., peer-to-peer and video streaming.
Game-changing features
Layer 7 traffic shaping
Classify hundreds of applications
Create per-application bandwidth limits
Prioritize productivity apps
Restrict or block recreational traffic
Guest access
One-click secure guest access
Guest isolation firewall
Customizable splash pages
Cisco ISE integration for guest access and BYOD posturing
Cloud management
Network-wide visibility and control
Integrated analytics, reporting, and anomaly detection across networks
Self-provisioning for rapid deployment
Redundancy and security built into cloud architecture
Device management
Create device-specific firewall rules
Monitor and track device inventory
Deploy applications and enforce security settings
Enterprise Mobility Management (EMM) and Mobility Device Management (MDM) integration
Analytics
Measure visitor capture rate, visit length, and visit rate across sites
Global layer 7 traffic analytics reporting per device, network, and application
License: |
Wi-Fi 6 with multigigabit Ethernet
Wi-Fi 6 performance and efficiency with a dedicated security radio.
The Cisco Meraki MR44 is a cloud-managed 2x2:2 + 4x4:4 802.11ax access point that raises the bar for wireless performance and efficiency. Designed for next-generation deployments in offices, schools, hospitals, shops, and hotels, the MR44 offers high throughput, enterprise-grade security, and simple management.
The MR44 provides a maximum of 3 Gbps* aggregate frame rate with concurrent 2.4 GHz and 5 GHz radios. A dedicated third radio provides real-time WIDS/WIPS with automated RF optimization, and a fourth integrated radio delivers Bluetooth scanning and beaconing.
With the combination of cloud management, high performance hardware, multiple radios, and advanced software features, the MR44 makes an outstanding platform for the most demanding of uses—including high-density deployments and bandwidth or performance-intensive applications like voice and high-definition video.
Main Features
Dual–radio aggregate frame rate of up to 3.55 Gbps
2.4 GHz 2x2:2 radio and 5 GHz 4x4:4 radio offer a combined dual–radio aggregate frame rate of 3 Gbps*, with up to 2,402 Mbps in the 5 GHz band and 573 Mbps in the 2.4 GHz band. Technologies like transmit beamforming and enhanced receive sensitivity allow the MR44 to support a higher client density than typical enterprise-class access points, resulting in better performance for more clients, from each AP.
Multi User Multiple Input Multiple Output (MU-MIMO)
With support for features of 802.11ax, the MR44 offers MU-MIMO and OFDMA for more efficient transmission to multiple clients. Especially suited to environments with numerous mobile devices, MU-MIMO enables multiple clients to receive data simultaneously. This increases the total network performance and improves the end user experience.
Dedicated third radio delivers 24x7 wireless security and RF analytics
The MR44’s dedicated dual-band scanning and security radio continually assesses the environment, characterizing RF interference and containing wireless threats like rogue access points. There’s no need to choose between wireless security, advanced RF analysis, and serving client data - a dedicated third radio means that all functions occur in real-time, without any impact to client traffic or AP throughput.
Bluetooth Low Energy Beacon and scanning radio
An integrated fourth Bluetooth radio provides seamless deployment of BLE Beacon functionality and effortless visibility of Bluetooth devices. The MR44 enables the next generation of location-aware applications while future proofing deployments, ensuring it’s ready for any new customer engagement strategies.
Inside the Meraki MR
Image example of MR56, features vary by model
Game-changing features
RF optimisation
Dual-concurrent radios with MU-MIMO support
Radios optimized for rate-vs.-range performance
Dedicated security and RF management radio
Built-in real-time RF spectrum view; cloud-based automatic RF optimization
Cloud management
Network-wide visibility and control
Self-provisioning for rapid deployment
Automatic reporting
Seamless firmware updates
Enterprise security
802.1X and native Active Directory integration
Air Marshal: real-time WIPS with forensics
Built-in antivirus scan (NAC)
Built-in Umbrella DNS security with Advanced License
Layer 7 traffic shaping
Classify hundreds of applications
Create per-application bandwidth limits
Prioritize productivity apps
Restrict or block recreational traffic
Location analytics
Measure visitor capture rate, visit length, and repeat visit rate
Measure visitor trends over time
Compare site-to-site performance across locations
License: |
Wi-Fi 6 with multigigabit Ethernet
Performance and efficiency for indoor environments
The Cisco Meraki MR46E is a cloud-managed 4x4:4 802.11ax access point that raises the bar for wireless performance and efficiency. Designed for next-generation deployments in offices, schools, hospitals, shops, and hotels, the MR46E offers high throughput, enterprise-grade security, and simple management.
The MR46E provides a maximum of 3.55 Gbps* aggregate frame rate with concurrent 2.4 GHz and 5 GHz radios. A dedicated third radio provides real-time WIDS/WIPS with automated RF optimization, and a fourth integrated radio delivers Bluetooth scanning and beaconing.
With the combination of cloud management, high performance hardware, multiple radios, and advanced software features, the MR46E makes an outstanding platform for the most demanding of uses—including high-density deployments and bandwidth or performance-intensive applications like voice and high-definition video.
Main Features
Dual–radio aggregate frame rate of up to 3.55 Gbps
5 GHz 4x4:4 radio and 2.4 GHz 4x4:4 radio offer a combined dual–radio aggregate frame rate of 3.55 Gbps*, with up to 2,402 Mbps in the 5 GHz band and 1,148 Mbps in the 2.4 GHz band. Technologies like transmit beamforming and enhanced receive sensitivity allow the MR46E to support a higher client density than typical enterprise-class access points, resulting in better performance for more clients, from each AP.
Multi User Multiple Input Multiple Output (MU-MIMO)
With support for features of 802.11ax, the MR46E offers MU-MIMO and OFDMA for more efficient transmission to multiple clients. Especially suited to environments with numerous mobile devices, MU-MIMO enables multiple clients to receive data simultaneously. This increases the total network performance and improves the end user experience.
Dedicated third radio delivers 24x7 wireless security and RF analytics
The MR46E’s dedicated dual-band scanning and security radio continually asses the environment, characterizing RF interference and containing wireless threats like rogue access points. There’s no need to choose between wireless security, advanced RF analysis, and serving client data - a dedicated third radio means that all functions occur in real-time, without any impact to client traffic or AP throughput.
Bluetooth Low Energy Beacon and scanning radio
An integrated fourth Bluetooth radio provides seamless deployment of BLE Beacon functionality and effortless visibility of Bluetooth devices. The MR46E enables the next generation of location-aware applications while future proofing deployments, ensuring it’s ready for any new customer engagement strategies.
Inside the Meraki MR
Image example of MR56, features vary by model
Game-changing features
RF optimisation
Dual-concurrent radios with MU-MIMO support
Radios optimized for rate-vs.-range performance
Third radio dedicated to security and RF management
Built-in real-time RF spectrum view; cloud-based automatic RF optimization
Cloud managed
Network-wide visibility and control
Integrated analytics, reporting, and anomaly detection across networks
Self-provisioning for rapid deployment
Redundancy and security built into cloud architecture
Enterprise security
802.1X and native Active Directory integration
Air Marshal: real-time WIPS with forensics
Built-in antivirus scan (NAC)
Built-in Umbrella DNS security
Layer 7 traffic shaping
Create per-application bandwidth limits
Prioritize productivity apps
Restrict or block recreational traffic
Location analytics
Measure visitor capture rate, visit length, and repeat visit rate
Real-time and historical AP event data across radios
Global layer 7 traffic analytics reporting per device, network, and app
Accessories Available:
Antenna Accessory MA-ANT-3-B6
(sold separately)
The Dipole antenna is ideal for low ceiling installations where wall penetration or extended reach are important. Some example use cases are low-density deployments like schools and hotels to provide basic connectivity. These types of best-effort deployments usually have APs installed on walls or uneven surfaces. This antenna is bendable.
Mounting Kit Accessory MA-MNT-MR-18
This kit provides mounting accessories and hardware for Cisco Meraki MR46E access points.
Can be used to mount to most 9/16 in, 15/16 in, or 1 ½ in T-rails
Replacement mount plate, drop ceiling clips, security screw tool
Two 6-32x4 mm (flush T-rail) screws, two 6-32x7 mm screws (recessed T-rail)
Two rubber spacers, two wall screws and anchors, security screws
License: |
Outdoor and industrial Wi-Fi 6
External antennas, integrated and dedicated security, Bluetooth® radios.
The Cisco Meraki MR76 is a cloud-managed 2x2:2 802.11ax access point that raises the bar for wireless performance and efficiency. Designed for next-generation deployments in offices, schools, hospitals, shops, and hotels, the MR76 offers high throughput, enterprise-grade security, and simple management.
The MR76 provides a maximum of 1.7 Gbps* aggregate frame rate with concurrent 2.4 GHz and 5 GHz radios. A dedicated third radio provides real-time WIDS/WIPS with automated RF optimization, and a fourth integrated radio delivers Bluetooth scanning and beaconing.
With the combination of cloud management, high performance hardware, multiple radios, and advanced software features, the MR76 makes an outstanding platform for the most demanding of uses—including high-density deployments and bandwidth or performance-intensive applications like voice and high-definition video.
Main Features
Dual–radio aggregate frame rate of up to 1.7 Gbps
5 GHz 2x2:2 radio and 2.4 GHz 2x2:2 radio offer a combined dual–radio aggregate frame rate of 1.7 Gbps*, with up to 1,201 Mbps in the 5 GHz band and 573 Mbps in the 2.4 GHz band. Technologies like transmit beamforming and enhanced receive sensitivity allow the MR76 to support a higher client density than typical enterprise-class access points, resulting in better performance for more clients, from each AP.
Multi User Multiple Input Multiple Output (MU-MIMO)
With support for features of 802.11ax, the MR76 offers MU-MIMO and OFDMA for more efficient transmission to multiple clients. Especially suited to environments with numerous mobile devices, MU-MIMO enables multiple clients to receive data simultaneously. This increases the total network performance and improves the end user experience.
Dedicated third radio delivers 24x7 wireless security and RF analytics
The MR76’s dedicated dual-band scanning and security radio continually asses the environment, characterizing RF interference and containing wireless threats like rogue access points. There’s no need to choose between wireless security, advanced RF analysis, and serving client data - a dedicated third radio means that all functions occur in real-time, without any impact to client traffic or AP throughput.
Bluetooth Low Energy Beacon and scanning radio
An integrated fourth Bluetooth radio provides seamless deployment of BLE Beacon functionality and effortless visibility of Bluetooth devices. The MR76 enables the next generation of location-aware applications while future proofing deployments, ensuring it’s ready for any new customer engagement strategies.
Inside the Meraki MR
Image example of MR56, features vary by model
Game-changing features
RF optimisation
Cloud-based RF planning
Built-in spectrum analysis
Dual-concurrent radios with band steering
Cloud management
Network-wide visibility and control
Self-provisioning for rapid deployment
Automatic reporting
Seamless firmware updates
Enterprise security
802.1X and native Active Directory integration
Air Marshal: real-time WIPS with forensics
Built-in antivirus scan (NAC)
Built-in Umbrella DNS security
Mesh
Self-configuring, self-optimizing mesh
High-performance multi-radio routing protocols
Extends coverage to hard-to-wire areas
Self-heals after cable or switch failures
Location analytics
Measure visitor capture rate, visit length, and repeat visit rate
Measure visitor trends over time and compare performance across locations
Enable location services through integrated iBeacon functionality
License: |
Wi-Fi 6 with multi-gigabit Ethernet
Ultra-high performance and efficiency for dense indoor environments with a dedicated security radio.
The Cisco Meraki MR56 is a cloud-managed 8x8:8 802.11ax access point that raises the bar for wireless performance and efficiency. Designed for next-generation deployments in offices, schools, hospitals, shops, and hotels, the MR56 offers high throughput, enterprise-grade security, and simple management.
The MR56 provides a maximum of 5.9 Gbps* aggregate frame rate with concurrent 2.4 GHz and 5 GHz radios. A dedicated third radio provides real-time WIDS/WIPS with automated RF optimization, and a fourth integrated radio delivers Bluetooth scanning and beaconing.
With the combination of cloud management, high performance hardware, multiple radios, and advanced software features, the MR56 makes an outstanding platform for the most demanding of uses—including high-density deployments and bandwidth or performance-intensive applications like voice and high-definition video.
Main Features
Dual–radio aggregate frame rate of up to 5.9 Gbps
2.4 GHz 4x4:4 radio and 5 GHz 8x8:8 radio offer a combined dual–radio aggregate frame rate of 5.9 Gbps*, with up to 4,804 Mbps in the 5 GHz band and 1,147 Mbps in the 2.4 GHz band. Technologies like transmit beamforming and enhanced receive sensitivity allow the MR56 to support a higher client density than typical enterprise-class access points, resulting in better performance for more clients, from each AP.
Multi User Multiple Input Multiple Output (MU-MIMO)
With support for features of 802.11ax, the MR56 offers MU-MIMO and OFDMA for more efficient transmission to multiple clients. Especially suited to environments with numerous mobile devices, MU-MIMO enables multiple clients to receive data simultaneously. This increases the total network performance and improves the end user experience.
Dedicated third radio delivers 24x7 wireless security and RF analytics
The MR56’s dedicated dual-band scanning and security radio continually assesses the environment, characterizing RF interference and containing wireless threats like rogue access points. There’s no need to choose between wireless security, advanced RF analysis, and serving client data - a dedicated third radio means that all functions occur in real-time, without any impact to client traffic or AP throughput.
Bluetooth Low Energy Beacon and scanning radio
An integrated fourth Bluetooth radio provides seamless deployment of BLE Beacon functionality and effortless visibility of Bluetooth devices. The MR56 enables the next generation of location-aware applications while future proofing deployments, ensuring it’s ready for any new customer engagement strategies.
Inside the Meraki MR
Image example of MR56, features vary by model
Game-changing features
RF optimisation
Dual-concurrent radios with MU-MIMO support
Radios optimized for rate-vs.-range performance
Third radio dedicated to security and RF management
Built-in real-time RF spectrum view; cloud-based automatic RF optimization
Layer 7 traffic shaping
Classify hundreds of applications
Create per-application bandwidth limits
Prioritize productivity apps
Restrict or block recreational traffic
Cloud management
Network-wide visibility and control
Self-provisioning for rapid deployment
Automatic reporting
Seamless firmware updates
Enterprise security
802.1X and native Active Directory integration
Air Marshal: real-time WIPS with forensics
Built-in antivirus scan (NAC)
Built-in Umbrella DNS security
Presence location analytics
Measure visitor capture rate, visit length, and repeat visit rate
Measure visitor trends over time and compare performance across locations
License: |
Wi-Fi 6 for demanding, high-density environments
Performance-driven Wi-Fi 6, dedicated security, and Bluetooth® Low Energy radio.
The Cisco Meraki MR86 is a cloud-managed 4x4:4 802.11ax access point that raises the bar for wireless performance and efficiency. Designed for next-generation deployments in offices, schools, hospitals, shops, and hotels, the MR86 offers high throughput, enterprise-grade security, and simple management.
The MR86 provides a maximum of 3.5 Gbps* aggregate frame rate with concurrent 2.4 GHz and 5 GHz radios. A dedicated third radio provides real-time WIDS/WIPS with automated RF optimization, and a fourth integrated radio delivers Bluetooth scanning and beaconing.
With the combination of cloud management, high performance hardware, multiple radios, and advanced software features, the MR86 makes an outstanding platform for the most demanding of uses—including high-density deployments and bandwidth or performance-intensive applications like voice and high-definition video.
Main Features
Dual-radio aggregate frame rate of up to 3.5 Gbps
5 GHz 4x4:4 radio and 2.4 GHz 4x4:4 radio offer a combined dual-radio aggregate frame rate of 3.5 Gbps*, with up to 2,402 Mbps in the 5 GHz band and 1,148 Mbps in the 2.4 GHz band. Technologies like transmit beamforming and enhanced receive sensitivity allow the MR86 to support a higher client density than typical enterprise-class access points, resulting in better performance for more clients, from each AP.
Multi User Multiple Input Multiple Output (MU-MIMO)
With support for features of 802.11ax, the MR86 offers MU-MIMO and OFDMA for more efficient transmission to multiple clients. Especially suited to environments with numerous mobile devices, MU-MIMO enables multiple clients to receive data simultaneously. This increases the total network performance and improves the end user experience.
Dedicated third radio delivers 24x7 wireless security and RF analytics
The MR86's dedicated dual-band scanning and security radio continually asses the environment, characterizing RF interference and containing wireless threats like rogue access points. There's no need to choose between wireless security, advanced RF analysis, and serving client data - a dedicated third radio means that all functions occur in real-time, without any impact to client traffic or AP throughput.
Bluetooth Low Energy Beacon and scanning radio
An integrated fourth Bluetooth radio provides seamless deployment of BLE Beacon functionality and effortless visibility of Bluetooth devices. The MR86 enables the next generation of location-aware applications while future proofing deployments, ensuring it's ready for any new customer engagement strategies.
Inside the Meraki MR
Image example of MR56, features vary by model
Game-changing features
RF optimisation
Dual-concurrent radios with MU-MIMO support, rate-vs.-range performance
Third radio dedicated to security and RF management
Built-in real-time RF specturm view
Cloud-based, automatic RF optimization
Cloud management
Network-wide visibility and control
Self-provisioning for rapid deployment
Automatic reporting
Seamless firmware updates
Enterprise security
802.1X and native Active Directory integration
Air Marshal: real-time WIPS with forensics
Built-in antivirus scan (NAC)
Built-in Umbrella DNS security with Advanced License
Traffic analytics
Classify hundreds of applications
Create per-application bandwidth limits
Prioritize productivity apps
Restrict recreational traffic
Guest access
One-click secure guest access
Guest isolation firewall
Customizable splash pages
Integrated Facebook Wi-Fi log in
License: |
High Performance 802.11ax Wireless
The Cisco Meraki MR46 is a cloud-managed 4x4:4 802.11ax access point that raises the bar for wireless performance and efficiency. Designed for next-generation deployments in offices, schools, hospitals, shops, and hotels, the MR46 offers high throughput, enterprise-grade security, and simple management.
The MR46 provides a maximum of 3.5 Gbps* aggregate frame rate with concurrent 2.4 GHz and 5 GHz radios. A dedicated third radio provides real-time WIDS/WIPS with automated RF optimization, and a fourth integrated radio delivers Bluetooth scanning and beaconing.
With the combination of cloud management, high performance hardware, multiple radios, and advanced software features, the MR46 makes an outstanding platform for the most demanding of uses—including high-density deployments and bandwidth or performance-intensive applications like voice and high-definition video.
Features:
4x4:4 MU-MIMO 802.11ax
Integrated enterprise security and guest access
24x7 real-time WIDS/WIPS and spectrum analytics via dedicated third radio
3.5* Gbps dual-radio aggregate frame rate
Application-aware traffic shaping
Optimized for voice and video
Integrated Bluetooth Low Energy Beacon
Self-configuring, plug-and-play deployment
Sleek design blends into office environments
Integrated scanning radio
Full-time Wi-Fi location tracking via dedicated 3rd radio
Enhanced transmit power and receive sensitivity
MR46 and Meraki Cloud Management
Management of the MR46 is performed through the Meraki cloud, with an intuitive browser-based interface that enables rapid deployment without time-consuming training or costly certifications. Because the MR46 is self-configuring and managed over the web, it can be deployed at a remote location in a matter of minutes, even without on-site IT staff.
24x7 monitoring via the Meraki cloud delivers real-time alerts if a network encounters problems. Remote diagnostic tools enable immediate troubleshooting over the web so that distributed networks can be managed with a minimum of hassle.
The MR46’s firmware is automatically kept up to date via the cloud. New features, bug fixes, and enhancements are delivered seamlessly over the web. This means no manual software updates to download or missing security patches to worry about.
Enterprise-class performance, managed from the cloud for faster deployment, simplified administration, and richer visibility
High Efficiency Wireless
Cisco Meraki access points are built from the highest grade components and carefully optimised for a seamless user experience. The outcome: faster connections, greater user capacity, more coverage, and fewer support calls.
Built for Performance
Enterprise-class Wi-Fi 6 (802.11ax) access points feature high power radios and enhanced receive sensitivity. Technologies like OFDMA, MU-MIMO, and integrated beamforming maximize capacity without sacrificing range.
Up to 8 transmit and 8 receive antennas for enhanced performance and better coverage
Multigigabit Ethernet for up to 5 Gbps over a single existing cable
Custom RF design supports high client density environments
Dedicated Security Radio
In addition to the high-power 2.4 GHz and 5 GHz client-service radios, most Meraki APs also include a dedicated security radio that:
Continuously scans and protects against security threats
Senses the RF environment and adapts to interference
Automatically configures RF settings to maximise performance.
Unmatched Visibility
Meraki access points provide deep network insight enabling smarter network management.
The Cisco Meraki dashboard gives visibility into the network users, their devices, and their applications. Armed with rich analytics, administrators can quickly create access control and application usage policies, optimising both the end-user experience and network security.
The Entire Network Under A Single Pane Of Glass
Powerful and intuitive multi-site management via the cloud, while eliminating the cost and complexity of traditional on-site wireless controllers.
The industry’s only end-to-end solution which unifies WAN, LAN, wireless LAN, and mobile device management under a single pane of glass.
Meraki Mobile App
The Meraki dashboard mobile app, available for iOS and Android, is ideal for network management on the go.
Manage your entire Meraki infrastructure from anywhere
Monitor wireless, switching, and security infrastructure
See network status and usage
Receive push notifications for network outages
Future-Proof
Seamless over-the-web upgrades deliver significant new features to your current products, increasing the value of your investment
New features delivered as automatic updates
Always up-to-date with emerging device types and application profiles
New visibility, analytics, and troubleshooting tools added to the dashboard
* Refers to maximum over-the-air data frame rate capability of the radio chipset, and may exceed data rates allowed by IEEE 802.11ac-compliant operation.
Meraki MR46 Specification Chart
CategorySpecifications
Radios
2.4 GHz 802.11b/g/n/ax client access radio
5 GHz 802.11a/n/ac/ax client access radio
2.4 GHz & 5 GHz dual-band WIDS/WIPS, spectrum analysis, & location analytics radio
2.4 GHz Bluetooth Low Energy (BLE) radio with Beacon and BLE scanning support
Concurrent operation of all four radios
Supported frequency bands (country-specific restrictions apply):
2.412-2.484 GHz
5.150-5.250 GHz (UNII-1)
5.250-5.350 GHZ (UNII-2)
5.470-5.600, 5.660-5.725 GHz (UNII-2e)
5.725 -5.825 GHz (UNII-3)
Antenna
Internal Antenna (5.4 dBi gain at 2.4 GHz, 6 dBi gain at 5 GHz)
802.11ax, 802.11ac Wave 2 and 802.11n Capabilities
DL-OFDMA**, UL-OFDMA**, TWT support**, BSS Coloring**
4 x 4 multiple input, multiple output (MIMO) with four spatial streams
SU-MIMO, UL MU-MIMO** and DL MU-MIMO support
Maximal ratio combining (MRC) & beamforming
20 and 40 MHz channels (802.11n); 20, 40, and 80 MHz channels (802.11ac Wave 2); 20, 40 and 80 MHz channels (802.11ax)
Up to 1024-QAM on both 2.4 GHz & 5 GHz bands
Packet aggregation
Power
Power over Ethernet: 42.5 - 57 V (802.3at compliant)
Alternative: 12 V DC input
Power consumption: 18W max (802.3at)
Power over Ethernet injector and DC adapter sold separately
Interfaces
1x 100/1000/2.5G BASE-T Ethernet (RJ45)
1x DC power connector (5.5 mm x 2.5 mm, center positive)
Mounting
All standard mounting hardware included
Desktop, ceiling, and wall mount capable
Ceiling tile rail (9/16, 15/16 or 1 1⁄2” flush or recessed rails), assorted cable junction boxes
Bubble level on mounting cradle for accurate horizontal wall mounting
Physical Security
Two security screw options (included) (13.5 mm long and 2.5 mm diameter and 5 mm head)
Kensington lock hard point
Concealed mount plate with anti-tamper cable bay
Environment
Operating temperature: 32 °F to 104 °F (0 °C to 40 °C)
Humidity: 5 to 95% non-condensing
Physical Dimensions
12.05” x 5.06” x 1.74” (30.6 cm x 12.84 cm x 4.426 cm), not including desk mount feet or mount plate
Weight: 800 g
Security
Integrated Layer 7 firewall with mobile device policy management
Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal
Flexible guest access with device isolation
VLAN tagging (802.1q) and tunneling with IPsec VPN
PCI compliance reporting
WEP***, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X, WPA3 - Personal**, WPA3 - Enterprise**, WPA3 - Enhanced Open (OWE)**
EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM
TKIP and AES encryption
Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration
Cisco ISE integration for Guest access and BYOD Posturing
Quality of Service
Advanced Power Save (U-APSD)
WMM Access Categories with DSCP and 802.1p support
Layer 7 application traffic identification and shaping
Mobility
PMK, OKC, & 802.11r for fast Layer 2 roaming
Distributed or centralized layer 3 roaming
Analytics
Embedded location analytics reporting and device tracking
Global L7 traffic analytics reporting per network, per device, & per application
LED Indicators
1 power/booting/firmware upgrade status
Regulatory
RoHS
For additional country-specific regulatory information, please contact Meraki sales
Warranty
Lifetime hardware warranty with advanced replacement included
Ordering Information
MR46-HW: Meraki MR46 Cloud Managed 802.11ax AP
MA-PWR-30W-XX: Meraki AC Adapter for MR Series (XX = US/EU/UK/AU)
MA-INJ-4-XX: Meraki Gigabit 802.3at Power over Ethernet Injector (XX = US/EU/UK/AU)
MA-INJ-5-XX: Meraki Multigigabit 802.3at Power over Ethernet Injector (XX = US/EU/UK/AU)
Note: Meraki access point license required.
**software features can be enabled via firmware updates
License: |
- Review: The 10 Best Wireless Access Points
- Review: The Top 10 Best Ethernet Cables
- What Is An Ethernet Cable And What Does It Do?
- 10 Best CCTV Security IP Cameras For Home & Business
- Review: Best Powerline Adapters In The UK
- Celebrating 20 Years Of Comms Express!
- The Top 10 DrayTek Wireless Access Points
- Best Selling APC Products At Comms Express
- Review: Top 5 Best Performing APC Uninterruptible Power Supply Units (UPS)
- Review: Top 10 Best PDU’s