Yealink Phone Accessories

The Yealink DECT dongle DD10K not only enables T41S / T42S to work concurrently with Yealink DECT system as a handset, after pairing with Yealink W60B DECT IP base station, but also enables T53 / T53W / T54W / T57W / T58A / VP59 to work as a base station, which can be registered with up to 4 compatible Yealink W52H / W56H / W53H handsets.

Supported by a powerful transmission rate of 1152kbps/s, this solution provides you with a quick and reliable DECT connection without wiring or cabling issues, and allows you to enjoy wireless communications in minutes.

To complement the Yealink DECT series, attaching a DD10K dongle to your desk phone offers you a new solution by combining the desk phone's features with DECT capabilities.

Yealink's DD10K is compliant with the CAT-iq 2.0 standards, and it is easy and safe to deploy, guaranteeing a flexible and optimal user experience.

Key Benefits:

Supports Yealink SIP- T41S/T42S with FW 66.82.0.35 or 66.84.0.10, Yealink T5 series.
Reliable Connection
Ease-of-use
Plug and Play
High Transmission Rate

Datasheets / User Manuals / Quick Start Guides can be downloaded from our Documentation tab (above)

The BT41 Bluetooth USB dongle adds Bluetooth connectivity to your IP Phone with a wide variety of Bluetooth Headsets, allowing you to receive calls wherever you are in the office. 

Compatible with Bluetooth V4.1 specification, back compatible with Bluetooth 1.1, 1.2, 2.0 and 3.0 for wide-ranging use.

Key Features:



Bluetooth specification: V4.1
Enhanced Data Rate (EDR) compliant for both 2Mbps and 3Mbps supported
A2DP technology
Supports 8K NBS (applies to SIP-T27G/T29G/T46G/T48G/T41S/T42S/T46S/T48S)
Supports 16K WBS (applies to SIP-T53)
Operating distance: 10 meters
Answer incoming calls through Bluetooth headset
Terminate calls through Bluetooth headset
Adjusts the volume of Bluetooth headset through Bluetooth headset or your phone
Bluetooth frequency range: 2.402GHz - 2.480GHz
Built-in security
Low power consumption



Datasheets / User Manuals / Quick Start Guides can be downloaded from our Documentation tab (above)

The new advanced Yealink Headset Adapter EHS36 provides the technical interface between Yealink SIP-T48S / T48G / T46S / T46G / T42S / T42G / T41S / T41P / T40G / T40P / T29G / T27G / T27P IP Phones and a compatible wireless headset.

It is approved for use with wireless headsets made by major manufactures, including Jabra, Plantronics and Sennheiser.

The unit is easy to install via Plug-and-play to the EXT phone port. This gives you direct control of your Yealink phone, with the ability to answer and hang-up calls remotely.

It has been designed specifically to ensure maximum effectiveness in reception areas, call-centers and for general telephone use. The EHS36 is ideal for corporate, financial, health, government, educational, industrial and SME/SoHo market sectors.

Key Features:



Supports Yealink SIP-T48S/T48G/T46S/T46G/T42S/T42G/T41S/T41P/ T40G/T40P/T29G/T27G/T27P IP Phones
Compatible with Jabra, Plantronics wireless headsets
Compatible with Sennheiser wireless headsets *
Plug and play
Answer incoming calls via the remote wireless headset
Terminate calls via the remote wireless headset
Incoming calls are signaled in the headset earpiece



* Note: The Sennheiser wireless headset must be running the latest firmware of the DW-Office series (version 96 or later)

Datasheets / User Manuals / Quick Start Guides can be downloaded from our Documentation tab (above)

The Yealink WF50 is a next-generation Wi-Fi USB Dongle, designed to allow users to connect to a 2.4GHz (150 Mbps) Wi-Fi network or a 5GHz (up to 433 Mbps) Wi-Fi network.

With wireless connections transmitting over the 5GHz band, users no longer need to worry about interference from nearby wireless devices which may interfere with their wireless signal - guaranteeing high-quality connections perfect for calls and HD video streaming.

This dynamic plug-and-play USB device is equipped with WPA/WPA2 encryption, providing your network with active defense against security threats.

Yealink WF50 is compliant with IEEE 802.11a/b/g/n/ac standard, maximizing reliability and throughput.

Key Features:



Compatible with Yealink SIP-T27G/T41S/T42S/T46S/T48S/T53 IP Phone (Version 84)
Dual-Band Connectivity
High Transmission Rate
Interference Free
Reliable Connection
Easy to Use
Plug and Play



Datasheets / User Manuals / Quick Start Guides can be downloaded from our Documentation tab (above)