Video Extenders

Overview This set of two Phono/RCA Baluns are part of our Modular AV Extender Wall Plate System range that employs balun technology to extend a combination of audio and video signals over low cost Cat.5e/6 cable.

Choose from a range of snap in modules, including VGA, RCA/Phono and S-Video combinations designed to be fitted to Lindy's single gang face plate or double gang face plate.

Product Details Pack of two Phono/RCA Baluns (transmitter and receiver)


Extends audio and video signals over CAT5e/6 or higher cable up to 300m


For use with the Lindy Modular AV Faceplate System


Simple punch down IDC termination


May be flush or surface fitted using a suitable pattress box (minimum depth of 44mm needed)


warranty: 2 Years


* Note: Maximum transmission distances will depend on the application and the twisted pair cable used. These products are designed for use with a single network cable connected between the transmitter and the receiver. Video signal quality will vary depending on the length and type of cable used and in some cases may be extended beyond 300m.

Overview The Lindy CAT5 FireWire Extender can be used to extend the distance between two FireWire devices by up to 75m.

Consisting of a local unit and a remote unit the Extenders can be used to connect FireWire 800 devices, or with the use of the supplied adapter cables FireWire 400 equipment.

Standard, low cost CAT5 or higher cable (not included) is used to connect the two units together, along with the supplied RJ-45 crossover adapter.

Both units are constructed from aluminium.

Product Details Extends FireWire peripheral devices up to 75m via CAT5 or higher cable


1394/1394a/1394b compatible, at speeds up to 400Mbps


Can be used with FireWire equipped PCs, Macs, digital cameras, scanners, external drives etc.


Long distance connection via CAT5 or higher STP/UTP cable (cable not included)


2 year warranty

The HDMI Extender by CAT-5e/6 uses two CAT-5e/6 cables to extend the HDTV display up to 30 metres.  It not only breaks the limitation of the HDMI cable transmission length, but also CAT-5e/6 has more flexibility and convenience in cable construction.

Resolutions will vary with length...

 Performance     Cat5/6 Cable Length Resolution CAT6 30M 1080P CAT6 40M 1080I/720P CAT6 45M 480P CAT5E 25M 1080P CAT5E 35M 1080I/720P CAT5E 45M 480P
• CAT-5e/6 cable can substitute HDMI cable to achieve long distance transmission
• Follow the standard of IEEE-568B
• Transmission distance can be up to 30 metres for 1080p while using CAT-6 cable
• Auto-adjustment of feedback, equalization
• Signalling rates up to 2.25Gbits in support of 1080P display
• HDCP compliant
• Devices with DVI output are not supported due to the lack of signal control

Contents:
Local & remote unit
1 x 5V DC Power supply
User manual

Overview This VGA module is part of our Modular AV Extender Wall Plate System range that employs balun technology to extend a combination of audio and video signals over low cost Cat.5e/6 cable.

Choose from a range of snap in modules, including VGA, RCA/Phono and S-Video combinations designed to be fitted to our single gang face plate or double gang face plate.

* Note: Maximum transmission distances will depend on the application and the twisted pair cable used. These products are designed for use with a single network cable connected between the transmitter and the receiver. Video signal quality, and display resolution will vary depending on the length and type of cable used and in some cases will work beyond 50m at lower screen resolutions.

Product Details Pack of two white VGA baluns for Monitor and PC


Extends VGA video signals over CAT5e/6 or higher cable up to 50m*


Consists of local and remote snap in modules


Requires a back box with a minimum depth of 44mm


warranty: 2 Years


Suitable for use with home cinema, presentation, projectors and CRT monitors etc.


Use with our single or double gang faceplates


Simple punch down IDC termination


May be flush or surface fitted using a suitable pattress box

DigitaLinx HDMI HDBaseT Extension Set w/ Control

4K 10.2G 70m HDBaseT extension set with RS232, IR, and flexible 2 way PoC

The DigitaLinx DL-HD70 extender set transmits HDMI (1080p, 4Kx2K (UHD) & 3D) including HDCP 2.2, bidirectional IR, and RS232 up to 70 meters away using a single twisted pair cable.

Built-in surge protection and diagnostic LEDs ensure hassle-free and robust installations. Flexible power design allows the units to be powered at either the TX or RX end, and only one power supply is required. The 12 volt power supply is secured with a screw-on connector to prevent the power from being accidentally disconnected.

The DL-HD70 is sold only as a set. All accessories are included including two IR emitters, two IR receivers, and two pairs of mounting brackets with screws. The individual transmitter and receiver are not compatible with other HDBaseT devices due to proprietary PoE circuitry.






 

Features and Benefits: Complete set includes TX, RX, mounting tabs, IR flasher/sensor, & power supply
Extend HDMI signals up to 4K, control, & power up to 70m
Extend bi-directional RS232, IR, & flexible PoC (Power on either end)
CEC supported
HDCP 2.2 Compliant
Diagnostic LEDs
Bidirectional Wideband IR and RS232 pass through
Flexible power design (use power supply at TX or RX)
Locking power connector 



Applications: Uses any Cat6 or greater twisted pair cabling
Extension of HDMI and control signals
Limited access to power for extenders on both ends
Ideal for Digital Signage, Home Theater, Commercial Video









I/O Connections HDMI One (1) HDMI Type A Receptacle Twisted Pair One (1) 8P8C port (Shielded RJ45) 18V DC Power One (1) 5.5 mm Outside Diameter, 2.1 mm Inside Diameter Barrel (Locking) IR Input One (1) 3.5mm TRS Jack IR Output One (1) 3.5mm TS Jack RS232 One (1) 3-Pole Euroblock connector Supported Audio and Video Maximum Video Compatibility 70 m: Deep Color 36/30/24 Bit at 1080p, 40 m: Deep Color 48 Bit at 1080p, 3D, and 4k x 2k (UHD) up to 30 Hz: RGB, YCbCr 4:4:4, YCbCr 4:2:2; up to 60 Hz: YCbCr 4:2:0 Video Compliance HDMI, HDCP 2.2, and CEC (Consumer Electronics Control) Embedded Audio Up to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master Audio Input DDC Signal 5.0 volts p-p (TTL) Input Video Signal 0.5 to 1.0 volts p-p IR Carrier Frequency Range 33-55kHz at 5 volts RS232 Baud Rate Up to 115200 baud HDBaseT Signal Characteristics Maximum Distance 70 m Cable Requirements Solid core shielded Category 5e, Category 6 or greater with TIA/EIA-568B crimp pattern Bandwidth 10.2 Gbps Gain 0 dB – 10 dB at 100 MHz Signal to Noise Ratio (SNR) > 70 dB at 100 MHz over 100 m Return Loss < -30 dB at 5 KHz Total Harmonic Distortion (THD) < 0.005% at 1 KHz Min-Max Signal Level < 0.3 V – 1.45 Vp-p Differential Phase Error ±10° at 135 MHz over 100 m Chassis and Environmental Enclosure Painted steel Dimensions 135mm x 74mm x 15mm (5.31 in. x 2.91 in. x 0.59 in.) Shipping Weight 0.82 kg / 1.8 lbs 9Operating Temperature (Environment) 0° to 40° C (+32° to +104° F) Operating Temperature (Chassis) 31° C (88° F) (S); 38° C (100° F) (R) Operating Humidity (Environment) 20% to 90%, Non-condensing Storage Temperature (Environment) -10° to +60° C (+14° to +140° F) Storage Humidity (Environment) 20% to 90%, Non-condensing Full specification and details can be found in the

DigitaLinx HDMI HDBaseT Extension Set w/ Control & Re-Clocking

4K 10.2G 70m HDMI extension set with RS232, IR, 2 way flexible PoC, & Re-Clocling circuitry

The DigitaLinx DL-UHDRC70 is an re-clocking HDBT extender system that is compatible with source devices that does not support clock stretching such as older cable set top boxes. The DL-UHDRC70 can extend HDMI up to 70m / 230' and also extends bi-directional IR as well as RS232. Supports 7.1 DTS Master HD and Dolby True HD.






 

Features and Benefits: Complete set includes TX, RX, mounting tabs, IR flasher/sensor, & power supply
Extend HDMI signals up to 4K up to 100m (4K 70m / 1080P 100m) w/ Re-Clocking Circuitry for maximum device compatibility such as cable boxes and streaming players
Extends bi-directional IR, RS232 and ethernet pass through. Flexible PoC (Power on either end)
Supports HDMI 2.0+, HDR and HDCP 2.2
Re-clocking feature allows for compatibility with 4K media players such as Roku and Amazon, cable set top boxes, and any other HDMI source
Cat5E/6 Cable 1080P 60M, 4K60 4:2:0 35M
Cat6/7 Cable 1080P 70M, 4K604:2:0 40M
Bi-directional power can be applied to either end
Supports 7.1 DTS Master HD and Dolby True HD
Locking Power Supply Connector
LED indicators for power, HDCP, and HDBaseT link 



Applications: Residential, Hospitality, House of Worship
Extend HDMI from problematic Cable / Sat boxes & Streaming players 









Video Video Input (Transmitter) (1) HDMI Video Output (Receiver) (1) HDMI Video I/O Connector (Transmitter / Receiver) (1) HDMI type A HDBaseT Connector (Transmitter / Receiver) (1) RJ45 HDBaseT Cable Requirements Solid core shielded Category 5e, Category 6 or greater with TIA/EIA-568B crimp pattern Maximum Transmission Distance Transmits 1080P signal up to 60m via Cat5e/6 cable, 70m via Cat6a/7 cable. Transmits 4K@60 4:2:0 8 bit signal up to 35m via Cat5e/6 cable, 40m via Cat6a/7 cable Maximum Pixel Clock 297Mhz Input Video Level 0.5-1.2 V p-p Input DDC Signal 5V p-p Input / Output Resolution Support 4096x2160@24/25/30/60Hz; 3840x2160@24/25/30/60Hz;1920x1200@60Hz; 1080p@50/60Hz; 720p50/60; 576p@30Hz; 480p@60Hz;1680x1050@60Hz; 1600x1200@60Hz; 1600x900@60Hz; 1440x900@60Hz;1366x768@60Hz; 1360x768@60Hz; 1280x1024@60Hz; 1280x960@;1280x800@60Hz; 1280x768@60Hz; 1024x768@60Hz; 800x600@60Hz Maximum Data Rate 10.2 Gbps Standards Compliant with HDMI 2.0 & HDCP 2.2 Audio Embedded Audio Multichannel audio support up to PCM 8 channel, supports 7.1 DTS Master HD and Dolby True HD Frequency Response 20Hz~20K Hz Control Control Port (Transmitter / Receiver) (2) IR IN/OUT (1) RS232 Control Connector (Transmitter / Receiver) (2) 3.5mm (IR IN/OUT) (1) 3 pin phoenix connector (RS232) AC input frequency 5 Hz IR Carrier Frequency Range 33-55kHz at 5 volts/td> RS232 Baud Rate Up to 115200 baud General Temperature 0 - 45 C (32 F - 113 F) Humidity 10% - 90% Power Supply Input Voltage: 100-240V 50/60Hz Output Voltage: DC18V 1A Power Consumption <10 W Dimension (W*H*D) 140mm x 17mm x 90.2mm for Transmitter / Receiver Weight 0.36kg / 0.75lbs for Transmitter / Receiver An owner's manual can be found in the

DigitaLinx HDMI 2.0 HDBaseT Extension Set

4K60 4:4:4 / HDR 18G 70m HDMI extender set with IR & 2 way flexible PoC

The DigitaLinx DL-HD70LS-H2 extender set transmits HDMI 2.0 audio and video, up to 4K@60Hz 4:4:4/ 8 bit color with HDR support, and bidirectional IR up to 70 meters away using a single solid core, shielded Category 6 twisted pair cable. Supports HDMI 2.0a, HDR10 and HDCP 2.2 as well as Dolby Atmos and DTS:X audio formats. Control extension supports bidirectional IR. Built in re-clocking circuitry ensures that extender set is backwards compatible with older HDMI version chip sets.

The extender system uses 2:1 data compression when the signal surpasses 10Gbps, anything under 10Gbps will never be compressed. System supports flexible power so entire extender circuit can be powered by either the TX or RX side. Supports static HDR (HDR10) only when data rate exceeds 18Gbps, supports dynamic HDR (HDR10+ / Dolby Vision) when data rate is 10Gbps or less.

Built-in surge protection helps ensure hassle-free and robust installations. The 18 volt power supply is secured with a screw-on connector to prevent the power from being accidentally disconnected.

The DL-HD70LS-H2 is sold only as a set. The individual transmitter and receiver are not compatible with other HDBaseT devices due to proprietary PoE circuitry.






 

Features and Benefits: Complete set Includes TX, RX, power supply, and IR flasher/emitter
Extend HDMI 2.0 signals up to 4K@60Hz / 4:4:4 up to 70m (4K 40m / 1080P 70m)
Extends bi-directional IR. Flexible PoC (Power on either end)
Supports HDR10
HDCP 2.2 compliant
Flexible power design (use power supply at TX or RX)
Includes re-clocking circuitry for maximum device compatibility
Locking power connector (power supply included) 



Applications: Extend HDMI source up to 18G
Residential home theater extension
4K HDR10
Residential, commercial, house of worship, higher education 









Supported Audio and Video Video Compliance HDMI 2.0+, HDCP2.2, and CEC (Consumer Electronics Control) Input / Output Resolution Support SMPTE: Up to 4096x2160@60Hz (4:4:4 chroma sub-sampling / 8 bit deep color) VESA: Up to 1920x1200 Maximum Pixel Clock 600MHz Embedded Audio Up to PCM 8 channel, Dolby Digital, DTS, TrueHD, DTS-HD Master Audio and Dolby Atmos IR Carrier Frequency Range 30-50kHz at 5 volts HDBaseT Signal Characteristics Maximum Distance 1080p: 70 meters / 231 feet. 4K@60Hz 4:4:4: 40 meters / 132 feet Cable Requirements Solid core shielded Category 6 F/UTP or greater with TIA/EIA-568B crimp pattern Bandwidth 18 Gbps (compressed) / 10.2 Gbps (uncompressed) Chassis and Environmental Dimensions (H x W x D) 15.2 mm x 136 mm x 74 mm / 0.60 in x 5.37 in x 2.92 in Product Weight 0.24kg / 0.53lbs for each transmitter / receiver Operating Temperature 0° to +45° C (+32° to +113° F) Storage Temperature -20°C to 70°C (-4°F to 158°F) Operating Humidity (Environment) 10% to 90%, Non-condensing ESD Protection Human-body Model: ±8kV (Air-gap discharge) ±4kV (Contact discharge) Surge Protection Voltage: ±1 kV Power Maximum Power Consumption 12.8 watts Power Supply Input Voltage 100-240V AC at 50-60 Hz Power Supply Output Voltage 18V DC Regulatory CE, FCC, RoHS An owner's manual can be found in the

Overview The VE802 HDMI HDBaseT-Lite Extender extends an HDBaseT signal up to 70m from the HDBaseT source using one Cat 5e/6/6a cable. VE802 supports RS-232 and IR signaling passthrough, allowing you to control the HDMI source device from the remote unit (VE802R) while also granting access to the HDMI display device from the local unit (VE802T). IR signals can also be extended in both directions. The VE802 features Power over HDBaseT (POH) which can send power over Cat 5e/6/6a cable without an additional power supply. The VE802 is HDMI (3D, Deep Color,4k) and HDCP compatible. The VE802 is perfect for a digital entertainment center or any installation that requires superior video quality.



Package Contents 1x VE802T/R HDMI HDBaseT-Lite Extender with POH
1x Power Adapter (VE802T)
1x IR Transmitter
1x IR Receiver
2x Terminal Blocks
1x User Instructions


Features HDBaseT Connectivity – extends an HDMI connection over a long distance via one Cat 5e/6/6a cable
Superior video quality – up to 4K@35m (Cat 5e/6) / 40m (Cat 6a or ATEN 2L-2910 Cat 6 cable)
HDBaseT Anti-jamming – resists signal interference during high-quality video transmission using HDBaseT technology
POH (Power over HDBaseT) – supplies power from Transmitter to Receiver over a long distance via one Cat 5e/6/6a cable
Bi-directional RS-232 channel – allows you to connect to serial terminals or serial devices, such as touch screens and barcode scanners
Bi-directional IR channel – IR transmission is processed one direction at a time
Rack- Mountable

DigitaLinx HDMI HDBaseT Extension Set w/ Control & Ethernet

4K 10.2G 100m HDMI extension set with RS232, IR, ethernet, & 2 way flexible PoC

The DigitaLinx DL-HDE100 extender set transmits HDMI (1080p, 4Kx2K (UHD) & 3D) including HDCP 2.2, Ethernet, bidirectional IR, and RS232 up to 100 meters away using a single twisted pair cable.

Built-in surge protection and diagnostic LEDs ensure hassle-free and robust installations. Flexible power design allows the units to be powered at either the TX or RX end, and only one power supply is required. The 12 volt power supply is secured with a screw-on connector to prevent the power from being accidentally disconnected.

The DL-HDE100 is sold only as a set. All accessories are included including two IR emitters, two IR receivers, and two pairs of mounting brackets with screws. The individual transmitter and receiver are not compatible with other HDBaseT devices due to proprietary PoE circuitry.









Features and Benefits: Complete set includes TX, RX, mounting tabs, IR flasher/sensor, & power supply
Extend HDMI signals up to 4K up to 100m (4K 70m / 1080P 100m)
Extends bi-directional IR, RS232 and ethernet pass through. Flexible PoC (Power on either end)
Built-in surge protection
Diagnostic LEDs
HDCP 2.2 compliant
Bidirectional Wideband IR and RS232 pass-through
100-BaseT Ethernet pass-through
Flexible power design (use power supply at TX or RX)
Locking power connector (power supply included) 



Applications: Uses any Cat6 or greater twisted pair cabling
Extension of HDMI and control signals
Limited access to power for extenders on both ends
Ideal for Digital Signage, Home Theater, Commercial Video 









I/O Connections HDMI One (1) HDMI Type A Receptacle Twisted Pair One (1) 8P8C port (Shielded RJ45) Ethernet One (1) 8P8C port (Shielded RJ45) IR Input One (1) 3.5mm TRS Jack IR Output One (1) 3.5mm TS Jack RS232 One (1) 3-Pole Euroblock connector 18V DC Power One (1) 5.5 mm Outside Diameter, 2.1 mm Inside Diameter Barrel (Locking) Audio Embedded Audio Multichannel audio support up to PCM 8 channel, supports 7.1 DTS Master HD and Dolby True HD Frequency Response 20Hz~20K Hz Supported Audio and Video Maximum Video Compatibility 100 m: Deep Color 48/36/30/24 Bit at 1080p, 3D, and 4k x 2k (UHD) up to 30 Hz: RGB, YCbCr 4:4:4, YCbCr 4:2:2; up to 60 Hz: YCbCr 4:2:0 Video Compliance HDMI, HDCP 2.2, and CEC (Consumer Electronics Control) Embedded Audio Up to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master Audio Input DDC Signal 5.0 volts p-p (TTL) Input Video Signal 0.5 to 1.0 volts p-p IR Carrier Frequency Range 33-55kHz at 5 volts Ethernet 100BaseT RS232 Baud Rate Up to 115200 baud HDBaseT Signal Characteristics Maximum Distance 100 m Cable Requirements Solid core shielded Category 5e, Category 6 or greater with TIA/EIA-568B crimp pattern Bandwidth 10.2 Gbps Gain 0 dB – 10 dB at 100 MHz Signal to Noise Ratio (SNR) > 70 dB at 100 MHz over 100 m Return Loss < -30 dB at 5 KHz Total Harmonic Distortion (THD) < 0.005% at 1 KHz Min-Max Signal Level < 0.3 V – 1.45 Vp-p Differential Phase Error ±10° at 135 MHz over 100 m Chassis and Environmental Enclosure Painted steel Dimensions 135mm x 74mm x 15mm (5.31 in. x 2.91 in. x 0.59 in.) Shipping Weight 0.82 kg / 1.8 lbs Operating Temperature (Environment) 0° to 40° C (+32° to +104° F) Operating Temperature (Chassis) 31° C (88° F) (S); 38° C (100° F) (R) Operating Humidity (Environment) 20% to 90%, Non-condensing Storage Temperature (Environment) -10° to +60° C (+14° to +140° F) Storage Humidity (Environment) 20% to 90%, Non-condensing Full specification and details can be found in the

The VE812 HDMI over Single Cat 5 Extender enables an HDMI display to be located up to 100 metres away from the source device. It can conveniently be extended using only one Cat 5e cable, which is cost-effective.

The VE812 not only supports HDMI (3D, Deep Colour ) but also Ultra HD (4k x 2k) and is HDCP compatible. Furthermore remote EDID pass-through ensures optimum video quality for your HDMI display.

The VE812 is perfect for the meeting room, home theatre or any installation that needs long distance transmission and superior video quality.

Features:

Extends the distance between HDMI source and HDMI display
Implements HDBaseT extension technology using only one Cat 5 cable to connect the transmitter and receiver
HDMI (3D, Deep Color, 4kx2k); HDCP Compatible
Anti-jamming – resists signal interference during high-quality video transmission using HDBaseT technology
Long distance transmission - up to 100m
Supports resolutions of up to Ultra HD 4kx2k and 1080p Full HD
EDID Expert – selects the optimum EDID settings for smooth power-up and highest quality display
Supports up to 340MHz bandwidth for high performance video
Signaling rates up to 3.4 Gbits
Supports Dolby True HD and DTS HD Master Audio
Built-in 8KV / 15KV ESD protection (Contact voltage 8KV; Air voltage 15 KV)

Digitalinx HDMI 2.0 HDBaseT Extension Set w/ ARC, Control, & Ethernet

4K60 4:4:4 / HDR 18G 100m HDMI extender set with IR, RS232, Digital Audio / ARC, Analog audio de-embed, Ethernet Pass Through, 2 way flexible PoC

The DigitaLinx DL-HD2100 HDBaseT extender set extends HDMI audio, video as well as control up to 100m / 330’ using a single Category 6 cable (4k@70M / 1080P@100m). Supports HDMI 2.0a, HDR10 and HDCP 2.2 as well as Dolby Atmos and DTS:X audio formats. Control extension supports bidirectional IR, Ethernet, ARC and RS232. Built in re-clocking circuitry ensures that extender set is backwards compatible with older HDMI version chip sets.

The DigitaLinx DL-HD2100 can transport HDMI data rates up to 18Gbps up to 100 meters. The system enables high data rates by utilizing visual lossless compression at a 2:1 data compression rate when the signal surpasses 10Gbps, anything under 10Gbps will never be compressed. Supports static HDR (HDR10) only when data rate exceeds 18Gbps, supports dynamic HDR (HDR10+ / Dolby Vision) when data rate is 10Gbps or less.

Built-in surge protection and diagnostic LEDs ensure hassle-free and robust installations. Flexible power design allows the units to be powered at either the TX or RX end, and only one power supply is required to power the set. The 12 volt power supply is secured with a screw-on connector to prevent the power from being accidentally disconnected.

The DL-HD2100 is sold only as a set. The individual transmitter and receiver are not compatible with other HDBaseT devices due to proprietary PoE circuitry.






 





Features and Benefits

Complete set includes TX, RX, power supply, mounting tabs, and IR flasher/emitter
Extend HDMI 2.0 signals up to 4K@60Hz / 4:4:4 up to 100m (4K 70m / 1080P 100m)
Extends bi-directional IR, RS232, ethernet, ARC, & Flexible PoC (Power on either end)
Optical Toslink connection for ARC or digital audio extension
Transmitter de-embeds analog or digital audio from ARC or Digital audio pass through from TV / receiver
Supports HDR10
HDCP 2.2 compliant
Includes re-clocking circuitry for maximum device compatibility
Flexible power design (use power supply at TX or RX)
Locking power connector (power supply included) 







Applications

Extend HDMI source up to 18G
Residential home theater extension
4K HDR10
Residential, commercial, house of worship, higher education 










 



Features HDCP Yes Type AV transmitter & receiver Maximum transfer distance 100 m Product colour Black Front panel control (TX) Yes Front panel control (RX) Yes An owner's manual can be found in the

HDMI, USB & RS-232 Extender

100m / Cat.6 / Dual Head


Highlights • Controls a high performance PC with two displays in a remote location with USB, Serial & bi-directional IR

• Extends two 1920x1080@60Hz HDMI signals up to 100m (328.08ft) using HDBaseT 2.0 over a single Cat.6 cable

• Digital & Analogue audio pass-through allows the connection of amplifiers, speakers and microphones

• Compatible with various USB devices including printers, storage devices & human interface devices (HID) such as mice & keyboards

• 2 year warranty

  The Lindy 100m Cat.6 Dual Head HDMI, USB & RS-232 KVM Extender is a powerful, versatile solution for extending and controlling a dual head workstation up to distances of 100m (328.08ft) over a single Cat.6 cable using HDBaseT. It's utilisation of the HDBaseT 2.0 specification allows for the transmission of audio, video & various control methods with just one connection between the transmitter and receiver units.

The use of two HDMI displays at resolutions up to 1920x1080@60Hz and USB HID’s in a convenient remote location creates a super effective productivity console. This gives users the ability to fully operate a high performance PC which is stored in a convenient location, helping to meet the requirements of modern offices as multiple applications can be open and sharing data simultaneously.

Up to 7.1 Digital & Stereo analogue can be passed through from the source to standalone amplifiers, speakers and headphones to ensure any relevant audible information or data is understood by the user.

Serial & Bi-directional IR add to this extender’s comprehensive suite of control methods. Source and display devices can be controlled at either point of a configuration using an IR remote control, whilst serial input and control devices can be used at the remote console.

In applications which rely heavily on the uptime of source devices such as medical environments or manufacturing, the Lindy 100m Cat.6 Dual Head KVM extender can be used to ensure PC’s or servers can be locked in a secure location to prevent any unauthorised access or tampering of equipment and protect them from major power outages, fires or water leaks. It’s reliable HDBaseT connection means users can be confident that control will always be maintained over the source device even in the most demanding environments.