| Product Code: | |
| Options: | |
| Qty: | |
| Unit Price: | £ |
| Part No: | FEDL-HD70LS-H2 |
| Manufacturer No: | DL-HD70LS-H2 |
| Delivery: | In Stock: Next Day |
 |
DigitaLinx HDMI 2.0 HDBaseT Extension Set
4K60 4:4:4 / HDR 18G 70m HDMI extender set with IR & 2 way flexible PoC
The DigitaLinx DL-HD70LS-H2 extender set transmits HDMI 2.0 audio and video, up to 4K@60Hz 4:4:4/ 8 bit color with HDR support, and bidirectional IR up to 70 meters away using a single solid core, shielded Category 6 twisted pair cable. Supports HDMI 2.0a, HDR10 and HDCP 2.2 as well as Dolby Atmos and DTS:X audio formats. Control extension supports bidirectional IR. Built in re-clocking circuitry ensures that extender set is backwards compatible with older HDMI version chip sets.
The extender system uses 2:1 data compression when the signal surpasses 10Gbps, anything under 10Gbps will never be compressed. System supports flexible power so entire extender circuit can be powered by either the TX or RX side. Supports static HDR (HDR10) only when data rate exceeds 18Gbps, supports dynamic HDR (HDR10+ / Dolby Vision) when data rate is 10Gbps or less.
Built-in surge protection helps ensure hassle-free and robust installations. The 18 volt power supply is secured with a screw-on connector to prevent the power from being accidentally disconnected.
The DL-HD70LS-H2 is sold only as a set. The individual transmitter and receiver are not compatible with other HDBaseT devices due to proprietary PoE circuitry.
| Supported Audio and Video | |
| Video Compliance | HDMI 2.0+, HDCP2.2, and CEC (Consumer Electronics Control) |
| Input / Output Resolution Support | SMPTE: Up to 4096x2160@60Hz (4:4:4 chroma sub-sampling / 8 bit deep color) VESA: Up to 1920x1200 |
| Maximum Pixel Clock | 600MHz |
| Embedded Audio | Up to PCM 8 channel, Dolby Digital, DTS, TrueHD, DTS-HD Master Audio and Dolby Atmos |
| IR Carrier Frequency Range | 30-50kHz at 5 volts |
| HDBaseT Signal Characteristics | |
| Maximum Distance | 1080p: 70 meters / 231 feet. 4K@60Hz 4:4:4: 40 meters / 132 feet |
| Cable Requirements | Solid core shielded Category 6 F/UTP or greater with TIA/EIA-568B crimp pattern |
| Bandwidth | 18 Gbps (compressed) / 10.2 Gbps (uncompressed) |
| Chassis and Environmental | |
| Dimensions (H x W x D) | 15.2 mm x 136 mm x 74 mm / 0.60 in x 5.37 in x 2.92 in |
| Product Weight | 0.24kg / 0.53lbs for each transmitter / receiver |
| Operating Temperature | 0° to +45° C (+32° to +113° F) |
| Storage Temperature | -20°C to 70°C (-4°F to 158°F) |
| Operating Humidity (Environment) | 10% to 90%, Non-condensing |
| ESD Protection | Human-body Model: ±8kV (Air-gap discharge) ±4kV (Contact discharge) |
| Surge Protection | Voltage: ±1 kV |
| Power | |
| Maximum Power Consumption | 12.8 watts |
| Power Supply Input Voltage | 100-240V AC at 50-60 Hz |
| Power Supply Output Voltage | 18V DC |
| Regulatory | CE, FCC, RoHS |
An owner's manual can be found in the PDF file
An installation guide can be found in the PDF file
DigitaLinx HDMI 2.0 HDBaseT Extension Set
4K60 4:4:4 / HDR 18G 70m HDMI extender set with IR & 2 way flexible PoC
The DigitaLinx DL-HD70LS-H2 extender set transmits HDMI 2.0 audio and video, up to 4K@60Hz 4:4:4/ 8 bit color with HDR support, and bidirectional IR up to 70 meters away using a single solid core, shielded Category 6 twisted pair cable. Supports HDMI 2.0a, HDR10 and HDCP 2.2 as well as Dolby Atmos and DTS:X audio formats. Control extension supports bidirectional IR. Built in re-clocking circuitry ensures that extender set is backwards compatible with older HDMI version chip sets.
The extender system uses 2:1 data compression when the signal surpasses 10Gbps, anything under 10Gbps will never be compressed. System supports flexible power so entire extender circuit can be powered by either the TX or RX side. Supports static HDR (HDR10) only when data rate exceeds 18Gbps, supports dynamic HDR (HDR10+ / Dolby Vision) when data rate is 10Gbps or less.
Built-in surge protection helps ensure hassle-free and robust installations. The 18 volt power supply is secured with a screw-on connector to prevent the power from being accidentally disconnected.
The DL-HD70LS-H2 is sold only as a set. The individual transmitter and receiver are not compatible with other HDBaseT devices due to proprietary PoE circuitry.
| Supported Audio and Video | |
| Video Compliance | HDMI 2.0+, HDCP2.2, and CEC (Consumer Electronics Control) |
| Input / Output Resolution Support | SMPTE: Up to 4096x2160@60Hz (4:4:4 chroma sub-sampling / 8 bit deep color) VESA: Up to 1920x1200 |
| Maximum Pixel Clock | 600MHz |
| Embedded Audio | Up to PCM 8 channel, Dolby Digital, DTS, TrueHD, DTS-HD Master Audio and Dolby Atmos |
| IR Carrier Frequency Range | 30-50kHz at 5 volts |
| HDBaseT Signal Characteristics | |
| Maximum Distance | 1080p: 70 meters / 231 feet. 4K@60Hz 4:4:4: 40 meters / 132 feet |
| Cable Requirements | Solid core shielded Category 6 F/UTP or greater with TIA/EIA-568B crimp pattern |
| Bandwidth | 18 Gbps (compressed) / 10.2 Gbps (uncompressed) |
| Chassis and Environmental | |
| Dimensions (H x W x D) | 15.2 mm x 136 mm x 74 mm / 0.60 in x 5.37 in x 2.92 in |
| Product Weight | 0.24kg / 0.53lbs for each transmitter / receiver |
| Operating Temperature | 0° to +45° C (+32° to +113° F) |
| Storage Temperature | -20°C to 70°C (-4°F to 158°F) |
| Operating Humidity (Environment) | 10% to 90%, Non-condensing |
| ESD Protection | Human-body Model: ±8kV (Air-gap discharge) ±4kV (Contact discharge) |
| Surge Protection | Voltage: ±1 kV |
| Power | |
| Maximum Power Consumption | 12.8 watts |
| Power Supply Input Voltage | 100-240V AC at 50-60 Hz |
| Power Supply Output Voltage | 18V DC |
| Regulatory | CE, FCC, RoHS |
An owner's manual can be found in the PDF file
An installation guide can be found in the PDF file
