Tripp Lite SR Accessories Brackets and Adapters

1U Rack-Mount Device Rack Extension Bracket, 1.5 in.

1U rack extensions allow you to fully open your console or console KVM switch when equipment mounted just above it extends past the front rails and prevents the unit from opening.






Features Overview Extends 1.5 in. past the front vertical mounting rails
Made from cold-rolled steel with black powder-coated finish
Compatible with EIA-standard 19 in. racks and rack cabinets
All necessary mounting hardware is included
This product is covered by a Lifetime Limited Warranty 



The B018-000-1P5 1U Rack-Mount Device Rack Extension Bracket allows you to mount a console or console KVM switch into a rack so that it extends 1.5 inches past the front vertical mounting rails. This is of use when the rack equipment mounted just above the console protrudes out the front of the rack and prevents the console from fully opening. The rack-mount extension brackets are constructed from cold-rolled steel with a black powder-coated finish to match your rack. Attach the rack extension brackets to your EIA-standard 19-inch rack, then attach the console or console KVM switch to the brackets. All necessary mounting hardware is included.






 






Extend Your Rack-Mount Device Past the Front Mounting Rails Allows your console or console KVM to fully open when it is being blocked by protruding rack equipment mounted just above it
Extends 1.5 in. past the front vertical mounting rails
Cold-rolled steel construction with black powder-coated finish designed for long life
Compatible with EIA-standard 19 in. racks and rack cabinets
All necessary mounting hardware is included 



Package Includes

(2) Rack extensions
(8) M6 screws
(8) M6 cage nuts
(8) M6 cup washers
Installation Guide



Overview UPC Code 037332206244 Product Type Mounting Bracket Accessories Type Mounting Bracket Video 3D Video Supported No Power Power Over Cable (PoC) Support No Physical Colour Black Rackmountable No Unit Packaging Type Box Communications EDID Compatible No IR Remote Extension Support No RS-232 Serial Extension Support No Consumer Electronics Control (CEC) Supported No Features & Specifications Driver Required No 10/100 Ethernet Extension Support No Standards & Compliance Certifications RoHS, REACH Full specification and details can be found in the

The SR2319ADAPT Mounting Adapter Kit allows you to mount 19-inch rack equipment in a 23-inch rack. Attach the adapter brackets to the rack’s vertical mounting rails using the included hardware. Then, attach 19-inch equipment to the brackets using the included hardware or your own. The cold-rolled steel brackets support a maximum load capacity of 20 pounds.

Key Features Mount 19 in. Rack Equipment in a 23 in. Rack
Adapter brackets attach to rack’s vertical mounting rails
Mounting hardware included
Made from cold-rolled steel with black finish
Maximum load capacity of 20 lb.

This Package Includes (2) Adapter brackets
(4) M6 screws
(4) M6 cage nuts
(6) 12-24 screws
Owner’s manual

SmartRack 4U Vertical Wall-Mount Rack Bracket

4U wall-mount bracket allows vertical installation of a 4U rack-mount device up to 175 lb.









Features Overview 19-inch wall-mount rack bracket with maximum load capacity of 175 lbs (79.4 kgs)
Provides open, unrestricted access to equipment and cabling
Made from cold-rolled steel with black powder-coated finish
Equipment-mounting hardware included
Compatible with most EIA-standard 19 in. 2-post rack equipment
5-year limited warranty 








 

The SRWALLBRKT4U SmartRack® 4U Vertical Wall-Mount Rack Bracket is recommended for home offices and small businesses with rack-mount equipment that doesn't need to be secured and no room on the premises for a standard 19-inch wall-mount rack.

Made from heavy-duty cold-rolled steel with a durable black powder-coated finish, this 4U wall-mount bracket easily attaches to the wall of your back office or closet with user-supplied hardware. Wall-mounting holes are spaced 16 inches part to match standard wall-stud placement. Or you can install the bracket horizontally beneath a desk or workbench for instant access.

Use the included hardware to attach your 4U rack-mount equipment, such as a network switch or UPS system, to the steel bracket's rails. Its maximum load capacity is 175 lbs (79.4 kgs). Connected equipment hangs flush against the wall, allowing you unrestricted access. The SRWALLBRKT4U is compatible with most EIA-standard 19-inch two-post rack equipment.









4U Wall-Mount Bracket Allows Vertical Mounting in a Closet or Back Office Recommended for home offices and small businesses with no room for standard 19 in. rack
Provides open, unrestricted access to equipment and cabling
Maximum load capacity of 175 lbs (79.4 kgs)
Cold-rolled steel construction with black powder-coated finish designed for long life
Ships fully assembled for quick installation 





Attaches to the Wall with User-Supplied Hardware Wall-mounting holes spaced 16 in. apart for standard wall stud placement
Also mounts horizontally beneath a desk or workbench
Component hangs flush against the wall for unrestricted out-of-the-way access 





Compatible with EIA-Standard 19 in. 2-Post Rack Equipment Hardware included for mounting 4U rack equipment
Rails support square-hole mounting 



Package Includes

SRWALLBRKT4U SmartRack 4U Vertical Wall-Mount Rack Bracket
(12) M6 screws
(12) M6 cup washers
(12) M6 cage nuts
Installation Guide



Overview UPC Code 037332203205 Rack Type Open-Frame Physical Colour Black Maximum Device Depth 121.92 cm / 1,219 mm Maximum Weight Capacity 79 kg Rack Height 4U Shipping Dimensions (height x width x depth) 21.01 x 55.50 x 34.01 cm Shipping Weight 3.18 kg Unit Dimensions (height x width x depth) 19.46 x 50.01 x 19.46 cm Unit Weight 2.40 kg Number of Vertical Mounting Rails 2 Standards & Compliace Approvals EIA-310-D, IEC 60297-3-100, RoHS Full specification and details can be found in the

SmartRack 2U Vertical Wall-Mount Rack Bracket

2U wall-mount bracket allows vertical installation of a 2U rack-mount device up to 175 lb.









Features Overview 19-inch wall-mount rack with maximum load capacity of 175 lbs (79.4 kgs)
Provides open, unrestricted access to equipment and cabling
Made from cold-rolled steel with black powder-coated finish
Equipment-mounting hardware included
Compatible with most EIA-standard 19 in. 2-post rack equipment
5-year limited warranty 








 

The SRWALLBRKT2U SmartRack® 2U Vertical Wall-Mount Rack Bracket is recommended for home offices and small businesses with rack-mount equipment that doesn't need to be secured and no room on the premises for a standard 19-inch server rack.

Made from heavy-duty cold-rolled steel with a durable black powder-coated finish, this 2U rack-mount bracket easily attaches to the wall of your back office or closet with user-supplied hardware. Wall-mounting holes are spaced 16 inches part to match standard wall-stud placement. Or you can install the bracket horizontally beneath a desk or workbench for instant access.

Use the included hardware to attach your 2U rack-mount equipment, such as a network switch or UPS system, to the steel bracket's rails. Its maximum load capacity is 175 lbs (79.4 kgs). Connected equipment hangs flush against the wall, allowing you unrestricted access. The SRWALLBRKT2U is compatible with most EIA-standard 19-inch two-post rack equipment.









2U Wall-Mount Bracket Allows Vertical Mounting in a Closet or Back Office Recommended for home offices and small businesses with no room for standard 19 in. rack
Provides open, unrestricted access to equipment and cabling
Maximum load capacity of 175 lbs (79.4 kgs)
Cold-rolled steel construction with black powder-coated finish designed for long life
Ships fully assembled for quick installation 








Attaches to the Wall with User-Supplied Hardware Wall-mounting holes spaced 16 in. apart for standard wall stud placement
Also mounts horizontally beneath a desk or workbench
Component hangs flush against the wall for unrestricted out-of-the-way access 








Compatible with EIA-Standard 19 in. 2-Post Rack Equipment Hardware included for mounting 2U rack equipment
Rails support square-hole mounting 



Package Includes

SRWALLBRKT2U SmartRack 2U Vertical Wall-Mount Rack Bracket
(12) M6 screws
(12) M6 cup washers
(12) M6 cage nuts
Installation Guide



Overview UPC Code 037332203199 Rack Type Open-Frame Physical Colour Black Maximum Device Depth 121.92 cm / 1,219 mm Maximum Weight Capacity 79 kg Rack Height 2U Shipping Dimensions (height x width x depth) 15.01 x 55.50 x 21.49 cm Shipping Weight 1.80 kg Unit Dimensions (height x width x depth) 10.57 x 50.01 x 10.54 cm Unit Weight 1.20 kg Number of Vertical Mounting Rails 2 Standards & Compliace Approvals EIA-310-D, IEC 60297-3-100, RoHS Full specification and details can be found in the

SmartRack 6U Vertical Wall-Mount Rack Bracket

6U wall-mount bracket allows vertical installation of a 6U rack-mount device up to 200 lb.









Features Overview 19-inch wall-mount rack with maximum load capacity of 200 lbs (90.7 kgs)
Provides open, unrestricted access to equipment and cabling
Made from cold-rolled steel with black powder-coated finish
Equipment-mounting hardware included
Compatible with most EIA-standard 19 in. 2-post rack equipment
5-year limited warranty 








 

The SRWALLBRKT6U SmartRack® 6U Vertical Wall-Mount Rack Bracket is recommended for home offices and small businesses with rack-mount equipment that doesn't need to be secured and no room on the premises for a standard 19-inch server rack.

Made from heavy-duty cold-rolled steel with a durable black powder-coated finish, this 6U wall-mount bracket easily attaches to the wall of your back office or closet with user-supplied hardware. Wall-mounting holes are spaced 16 inches part to match standard wall-stud placement. Or you can install the bracket horizontally beneath a desk or workbench for instant access.

Use the included hardware to attach your 6U rack-mount equipment, such as a network switch or UPS system, to the steel bracket's rails. Its maximum load capacity is 200 lbs (90.7 kgs). Connected equipment hangs flush against the wall, allowing you unrestricted access. The SRWALLBRKT6U is compatible with most EIA-standard 19-inch two-post rack equipment.









6U Wall-Mount Bracket Allows Vertical Mounting in a Closet or Back Office Recommended for home offices and small businesses with no room for standard 19 in. rack
Provides open, unrestricted access to equipment and cabling
Maximum load capacity of 200 lbs (90.7 kgs)
Cold-rolled steel construction with black powder-coated finish designed for long life
Ships fully assembled for quick installation 





Attaches to the Wall with User-Supplied Hardware Wall-mounting holes spaced 16 in. apart for standard wall stud placement
Also mounts horizontally beneath a desk or workbench
Component hangs flush against the wall for unrestricted out-of-the-way access 





Compatible with EIA-Standard 19 in. 2-Post Rack Equipment Hardware included for mounting 6U rack equipment
Rails support square-hole mounting 



Package Includes

SRWALLBRKT6U SmartRack 6U Vertical Wall-Mount Rack Bracket
(12) M6 screws
(12) M6 cup washers
(12) M6 cage nuts
Installation Guide



Overview UPC Code 037332203212 Rack Type Open-Frame Physical Colour Black Maximum Device Depth 121.92 cm / 1,219 mm Maximum Weight Capacity 91 kg Rack Height 6U Shipping Dimensions (height x width x depth) 27.51 x 55.50 x 46.51 cm Shipping Weight 5.50 kg Unit Dimensions (height x width x depth) 28.32 x 50.01 x 28.32 cm Unit Weight 3.80 kg Number of Vertical Mounting Rails 2 Standards & Compliace Approvals EIA-310-D, IEC 60297-3-100, RoHS Full specification and details can be found in the