"TeamUp+" Series 2x1 HDMI / USB-C Collaboration Switcher
4K60 18G HDMI & USB-C auto switcher with USB 3.0 switching hub, audio de-embed and display control
The DL-SCU21C is a 2x1 HDMI 2.0b auto switcher featuring one HDMI input, one USB-C input and one HDMI output. The USB-C input supports video, data (USB host) and power charging up to 40w. There is a built in 2 port USB 3.0 hub that is backwards compatible with USB 2.0 and USB 1.1 formats. This switcher supports video resolutions up to 4Kx2K@60Hz 4:4:4, HDR, and multichannel audio. The USB-C input supports Display Port over Alternate Mode (ALT-DP), any laptop computer used with this device must support this mode. NOTE: When using a laptop with USB-C ports, check the laptops capability for supporting ALT-DP for video, data and power charging, not all laptops may support all three functions at once with external devices. Also be sure to use a USB-C cable that supports all three functions. Not all USB-C cables support all functions so please select carefully In addition to passing native EDID information from the display to an input on the switcher, there are multiple built-in EDID settings to choose from to simplify an installation. The switcher will de-embed 2 channel analog audio for audio reinforcement which is de-embedded from the HDMI output. The devices switching functions can be controlled via RS232 and front panel control buttons can be configured to control 3rd party devices connected to the switcher such as a TV display via CEC or RS232. When in auto-switch mode, the switcher will switch to an input as soon as a new source is connected. When the active source is removed, the switcher will select the prior source connected. When switching between HDMI and USB-C video inputs, the USB B Host port will follow HDMI and USB-C will act as a USB host disengaging USB B Host control.
Features and Benefits:
1 HDMI input, 1 USB-C input and 1 HDMI output; USB 3.0 hub built in
When switching to HDMI input, the USB-B host is turned on and is used to share USB devices connected to the USB hub
When switching to USB-C, USB host is switched to USB-C to share USB devices connected to the USB hub
Complete Plug and Play, NO additional driver or software required to be recognized by the computer
USB-C supports ALT-DP video, data and power charging to 40 watts
Controllable via front panel buttons & RS232
Built-in EDID management
Supports HDMI 2.0 and HDCP 2.2
Balanced analog audio for audio de-embedding.
Applications:
Perfect for bridging presentation spaces and video enabled spaces into one seamless experience
Ideal for bringing your own laptop into a video enabled space to use the USB peripherals in the room such as USB mic and camera
Note!!! The USB-C port supports Alt-DP mode for AV signals as well as USB data and power. The use of a USB 3.2 Gen1 USB Type C cable is required. Please check your cables carefully to ensure the proper cable is used.
Ports & interfaces
Video port type
HDMI
HDMI version
2.0b
HDMI ports quantity
2
Features
Audio output channels
7.1 channels
HD type
4K Ultra HD
Dolby technologies
DTS-HD Master Audio,DTS:X,Dolby Digital Plus,Dolby TrueHD
Maximum resolution
3840 x 2160 pixels
Maximum refresh rate
60 Hz
HDCP
Yes
Bandwidth
18 Gbit/s
HDCP version
2.2
Consumer Electronics Control (CEC) support
Yes
Power
AC adapter input voltage
100 - 240 V
AC adapter frequency
50 - 60 Hz
AC adapter output current
2.71 A
Power consumption (max)
54 W
Weight & Dimensions
Width
168 mm
Height
24.5 mm
Depth
95 mm
Weight
245 g
Operational Conditions
Storage relative humidity (H-H)
10 - 90 %
Storage temperature (T-T)
-20 - 70 °C
Operating temperature (T-T)
0 - 55 °C
Operating relative humidity (H-H)
10 - 90 %
A user manual can be found in the
DigitaLinx 4x4 HDMI 2.0 Matrix Switcher
4K60 4:4:4 / HDR 18G Matrix switcher with audio de-embed, IR, RS232, & TCP/IP control
The DigitaLinx DL-HDM44A-H2 is a four input by four output HDMI 2.0 matrix switcher with HDCP 2.2 support and capable of handling resolutions up 4K@60Hz 4:4:4 / 8 bit color with static and dynamic HDR output support for each channel. The matrix features advanced independent EDID management control for each HDMI input as well as an Easy EDID analyzer. The analog and digital audio outputs on the DL-HDM44A-H2 can be set to follow the HDMI video route or can be independently routed either by API or web control interface. Built in re-clocking circuitry ensures the switcher is backwards compatible with sources with older HDMI version chip sets.
The DL-HDM44A-H2 can be controlled via front panel buttons, front panel IR, external IR, remote IR, RS232, and Ethernet. The matrix includes a simple IR remote control to allow IR switching. The matrix also features a full command set for RS232 and Ethernet control with third party control systems, plus control via web user interface.
Features and Benefits:
4 x HDMI in, 4 x HDMI out
All HDMI I/O support full 18G 4K@60Hz 4:4:4 HDCP 2.2 and 4K HDR
Analog and digital de-embedded audio outputs
Audio outputs can follow video or be routed independently
Built in web server control
Supports IR, RS232 and IP control
Manual DIP switch for EDID management
Web control features advanced independent EDID control for each HDMI input
Open telnet API for 3rd party control
Integrated re-clocking circuitry for maximum device compatibility (cable box, streaming players, and other devices)
Applications:
True matrix routing and distribution of HDMI signals
A/V routing in environments with demanding control system
Ideal for residential AV distribution, houses of worship, corporate video conferencing
Installation guide can be found in the
