Legrand KEOR SPE RT UPS

The Legrand 311262 KEOR SPE RT 2U 1000VA UPS is designed to provide dependable power protection for critical IT equipment. Its versatile 2U rackmount or tower design fits easily into a variety of setups, ensuring continuous operation during power interruptions. The unit delivers clean, pure sinewave output with automatic voltage regulation to maintain stable power quality. Featuring a clear LCD display and multiple communication ports, it allows straightforward monitoring and control.

Key Features Power rating of 1000VA / 800W to support essential hardware
Dual form factor: rackmount or tower installation
Pure sinewave output for sensitive electronics
Hot-swappable sealed lead acid batteries for uninterrupted service
LCD display with multicoloured status indicators for clear information
USB, RS232, and SNMP ports for versatile communication and remote management
Comprehensive protection including overload, short circuit, back-feed, and emergency power off
Legrand Keor SPE R/T 1000 model is an uninterruptible power source with interactive line technology and sinusoidal output. It delivers a rated power of 1000VA - 800W, is managed by a microprocessor, is equipped with integrated self-diagnostics and works on cold-start. Keor SPE RT is a convertible UPS that can be used in both tower and rack configurations. Keor SPE R/T 1000 is internally equipped with valve-regulator, hermetically sealed, lead accumulator batteries to guarantee a minimum uptime of 8 minutes at 80% of the load.

The batteries can be easily replaced thanks to a specific door located on the front of the UPS. The presence of an electronic stabilizer (AVR) inside the UPS provides the connected loads with effective protection against any interference in the electrical mains. This UPS has 2 x (4 x IEC 320-C13) output sockets and 1-group can be programmable. Keor SPE R/T 1000 can be connected to a PC through the SNMP, USB and Serial RS232 port allowing you to monitor its operation, thanks to the free software, and carry out an emergency shutdown of Windows and Linux operating systems.

Design and Build The UPS comes in a compact 2U 19-inch rack chassis with a depth of 440mm and weighs 16.9 kg. Its design supports easy installation and maintenance, with hot-swappable batteries that minimize downtime.

Performance and Protection Equipped with a microprocessor control system and automatic voltage regulation, the unit maintains steady power delivery and safeguards connected devices from power surges and interruptions. The range of protection features includes safeguards against overload, short circuits, and temperature issues.

Applications This UPS is suitable for safeguarding IT infrastructure such as servers, storage systems, network equipment, telecommunications, and security systems where reliable power backup is critical.

The Legrand 311261 KEOR SPE RT 1U 1000VA UPS is a dependable power protection system designed for compact rack or tower installations. Built with pure sine wave output and advanced voltage regulation, it safeguards critical equipment from power interruptions, surges, and fluctuations. Its 1U form factor and convertible design make it ideal for environments where space is limited but consistent power delivery is essential. With hot-swappable batteries, a clear LCD interface, and versatile connectivity options, it offers reliability and ease of management in demanding setups.

Key Features 1000VA / 700W capacity with pure sine wave output
1U rack-mount or tower configuration
Automatic Voltage Regulation (AVR) for steady output
Hot-swappable, front-access batteries
LCD display with intuitive control panel
USB, RS-232, and optional SNMP connectivity
Programmable IEC-C13 outlet groups
Emergency Power Off (EPO) support
Legrand Keor SPE R/T 1000 model is an uninterruptible power source with interactive line technology. It delivers a rated power of 1000VA - 700W, is managed by a microprocessor, is equipped with integrated self-diagnostics and works on cold-start. Keor SPE RT is an convertible UPS that can be used in both tower and rack configurations. Keor SPE R/T 1000 is internally equipped with valve-regulator, hermetically sealed, lead accumulator batteries to guarantee a minimum uptime of 8 minutes at 80% of the load.

The batteries can be easily replaced thanks to a specific door located on the front of the UPS. The presence of an electronic stabilizer (AVR) inside the UPS provides the connected loads with effective protection against any interference in the electrical mains. This UPS has 2 x (3 x IEC 320-C13) output sockets and 2-group can be programmable. Keor SPE R/T 1000 can be connected to a PC through the SNMP, USB and Serial RS232 port allowing you to monitor its operation, thanks to the free software, and carry out an emergency shutdown of Windows and Linux operating systems. Power Performance This UPS delivers clean and stable power with a power factor of up to 0.9, ensuring connected devices operate without disruptions. Its built-in AVR adjusts voltage fluctuations without switching to battery mode, extending battery life and maintaining operational continuity.

Battery Management Equipped with hot-swappable sealed lead-acid batteries, the unit provides around 7 minutes of backup at full load. Battery replacement is simple, with front access for minimal downtime during maintenance.

Connectivity and Monitoring Multiple connection options, including USB and RS-232, allow easy integration with monitoring systems. An optional SNMP card enables network-based management, while programmable outlet groups support selective load control.

The Legrand 311264 KEOR SPE RT 2U 1500VA UPS is designed for dependable power protection in demanding IT, telecom, and security environments. Offering a pure sine wave output with line-interactive technology, it ensures consistent and stable power to connected equipment. Its convertible rack/tower form factor and short-depth 2U design provide installation flexibility without sacrificing performance or accessibility.

Key Features 1500VA / 1200W capacity with pure sine wave output
Convertible rackmount/tower 2U short-depth design
Hot-swappable VRLA batteries with front access
Automatic Voltage Regulation for stable output
LCD display and LED status indicators
USB, RS-232, and SNMP communications
Supports Emergency Power Off (EPO)
Legrand Keor SPE R/T 1500 model is an uninterruptible power source with interactive line technology and sinusoidal output. It delivers a rated power of 1500VA - 1200W, is managed by a microprocessor, is equipped with integrated self-diagnostics and works on cold-start. Keor SPE RT is a convertible UPS that can be used in both tower and rack configurations. Keor SPE R/T 1500 is internally equipped with valve-regulator, hermetically sealed, lead accumulator batteries to guarantee a minimum uptime of 8 minutes at 80% of the load. The batteries can be easily replaced thanks to a specific door located on the front of the UPS.

The presence of an electronic stabilizer (AVR) inside the UPS provides the connected loads w ith effective protection against any interference in the electrical mains. This UPS has 2 x (4 x IEC 320-C13) output sockets and 1-group can be programmable.Keor SPE R/T 1500 can be connected to a PC through the SNMP, USB and Serial RS232 port allow ing you to monitor its operation, thanks to the free software, and carry out an emergency shutdown of Windows and Linux operating systems.

The Legrand 311264 KEOR SPE RT 2U 1500VA UPS is designed for dependable power protection in demanding IT, telecom, and security environments. Offering a pure sine wave output with line-interactive technology, it ensures consistent and stable power to connected equipment. Its convertible rack/tower form factor and short-depth 2U design provide installation flexibility without sacrificing performance or accessibility.

Battery and Runtime Equipped with three 12V 9Ah VRLA batteries, this UPS offers up to 12 minutes runtime at 50% load. Battery Extension Packs can extend operational time significantly, providing flexibility for prolonged backup requirements.

Management and Connectivity The integrated LCD screen and multi-colour LED bar make monitoring straightforward. USB, RS-232, and SNMP interfaces allow for advanced communication and remote management, while EPO support ensures immediate shutdown when required.

Applications Ideal for IT racks, network equipment, telecommunications, and security systems, the KEOR SPE RT is built to meet the demands of professional environments where reliable, uninterrupted power is essential.

The Legrand 311265 KEOR SPE RT 2U 2200VA UPS delivers dependable power protection in a compact and versatile form. Designed for both rack and tower use, it offers a pure sine-wave output with a wide input range, making it suitable for safeguarding essential systems. With hot-swappable batteries, clear LCD controls, and multiple connectivity options, this UPS provides continuous operation and easy maintenance without system downtime.

Key Features 2200VA / 1980W capacity with pure sine-wave output
Rack or tower installation with reversible LCD display
Hot-swappable, sealed lead-acid battery modules
Multiple outlets including IEC C13 and C19 connectors
Advanced voltage regulation and surge protection
USB, RS-232, and SNMP communication support
Legrand Keor SPE R/T 2200 model is an uninterruptible power source with interactive line technology and sinusoidal output. It delivers a rated power of 2200VA - 1980W, is managed by a microprocessor, is equipped with integrated self-diagnostics and works on cold-start. Keor SPE RT is a convertible UPS that can be used in both tower and rack configurations. Keor SPE R/T 2200 is internally equipped with valve-regulator, hermetically sealed, lead accumulator batteries to guarantee a minimum uptime of 8 minutes at 80% of the load. The batteries can be easily replaced thanks to a specific door located on the front of the UPS.

The presence of an electronic stabilizer (AVR) inside the UPS provides the connected loads with effective protection against any interference in the electrical mains. This UPS has 2 x (4 x IEC 320-C13) + (1 x IEC 320-C19) output sockets and 1-group can be programmable. Keor SPE R/T 2200 can be connected to a PC through the SNMP, USB and Serial RS232 port allow ing you to monitor its operation, thanks to the free software, and carry out an emergency shutdown of Windows and Linux operating systems.

Power Capacity Delivering 2200VA of power, this UPS maintains stable performance for critical equipment. The pure sine-wave output ensures compatibility with sensitive devices while maintaining voltage within ±3% accuracy.

Battery & Runtime Equipped with 6 x 12V 7Ah VRLA batteries, it can provide around 8 minutes of runtime at 80% load. Batteries are hot-swappable, allowing replacement without interrupting connected systems.

Design & Connectivity The 2U rack-mount chassis can also be set up as a tower, featuring a reversible LCD panel for flexible viewing. Connectivity includes multiple IEC outlets, USB and RS-232 ports, plus optional SNMP support for network-based monitoring.

The Legrand 311267 KEOR SPE RT 2U 3000VA UPS is designed for dependable power protection in professional environments. Its convertible rack/tower design and pure sine-wave output make it suitable for critical equipment where continuous operation is essential. Equipped with a user-friendly LCD panel and versatile connectivity options, it offers both monitoring convenience and reliable performance during power interruptions.

Key Features 3000VA / 2700W capacity with pure sine-wave output
Convertible rack/tower 2U form factor with hot-swappable battery
USB, RS-232, and SNMP slot for monitoring and control
Automatic Voltage Regulation (AVR) and multiple protection systems
Clear LCD display with multicolour LED status indicators
Multiple IEC C13 and C19 outlets for flexible equipment connection
Legrand Keor SPE R/T 3000 model is an uninterruptible power source with interactive line technology and sinusoidal output. It delivers a rated power of 3000VA - 2700W, is managed by a microprocessor, is equipped with integrated self-diagnostics and works on cold-start. Keor SPE RT is a convertible UPS that can be used in both tower and rack configurations. Keor SPE R/T 3000 is internally equipped w ith valve-regulator, hermetically sealed, lead accumulator batteries to guarantee a minimum uptime of 8 minutes at 80% of the load. The batteries can be easily replaced thanks to a specific door located on the front of the UPS.

The presence of an electronic stabilizer (AVR) inside the UPS provides the connected loads with effective protection against any interference in the electrical mains. This UPS has 2 x (4 x IEC 320-C13) + (1 x IEC 320-C19) output sockets and 1-group can be programmable. Keor SPE R/T 3000 can be connected to a PC through the SNMP, USB and Serial RS232 port allowing you to monitor its operation, thanks to the free software, and carry out an emergency shutdown of Windows and Linux operating systems.

Power and Flexibility This UPS delivers a high power factor and supports both rack and tower mounting configurations, allowing it to adapt to various installation requirements. The hot-swappable battery design ensures maintenance can be carried out without interrupting power to connected devices.

Reliable Performance Featuring AVR and comprehensive protection mechanisms, the unit safeguards connected devices from power fluctuations, surges, and overloads. It also includes an Emergency Power Off (EPO) function for quick shutdown in critical situations.

Easy Monitoring The built-in LCD display and LED status indicators provide clear, real-time information about power conditions and battery status. With multiple communication ports, users can monitor and manage the UPS through compatible software.