Kramer HDBaseT Matrices

VS-62DT is a 6x2 4K@60Hz (4:2:0) HDMI/HDBaseT matrix switcher with HDMI and HDBaseT output transmitters that provide long-reach video and audio transmission. It supports resolutions of up to 4K@60Hz (4:2:0) and WUXGA. The matrix is a PoE provider that provides power over Ethernet to compatible PoE receivers.

Features
Max. Data Rate - 8.91Gbps (2.97Gbps per graphics channel).


Max. Resolution - 4K@60Hz (4:2:0).


HDCP 1.4 Support.


3D, Deep Color, x.v.Color™, Lip Sync, Dolby® TrueHD, Dolby Digital Plus, DTS-HD®, and 7.1 PCM.


Routing - Six HDMI inputs can be routed to an HDMI and HDBaseT output.


Power-over-Ethernet - Supply of PoE to compatible receivers.


EDID Capture - Copies and stores the EDID from a display device per input.


Programmable Step-in Functionality - When used together with compatible step-in devices, such as the SID-X3N and DIP-31 (using an HDMI cable that supports HEC, the HDMI Ethernet Channel).


True Video Clock Detection.


Advanced Auto AV Switching - Last connected and priority switching modes.


Non-Volatile EDID Storage.


Kramer reKlocking™ & Equalization Technology - Rebuilds the digital signal to travel longer distances.


Lock Button - Prevents tampering with front panel buttons.


Internal Pattern Generator.


Kramer Protocol 3000 Support.


Static or Dynamic DHCP IP Addressing.


Flexible Control Options - Front panel buttons, IR remote (available upon request) , RS-232, Ethernet, contact closure, embedded Web server and step-in.


Mini-USB Port - For upgrading firmware.

DT-IN4-F32 is a four-channel 4K@60Hz (4:2:0), long reach, HDBaseT input card for the VS-3232 Series Modular Multi-Format Digital Matrix Switchers. DT-IN4-F32 inputs four long reach HDBaseT signals with bidirectional RS-232 and IR from the line to the chassis. Features

Max. data rate - 10.2 Gbps (3.4Gbps per graphic channel)


System range - 40m (130ft) - 4K60 4:2:0 or 4K30 4:4:4; 70m (230ft) - 1080p 12bit (deep color)


HDTV compatible


HDCP compliant


3D Pass - through


Bidirectional RS - 232 and IR per port


Kramer equalization and re - klocking technology

DT-OUT4-F32 is a four-channel 4K@60Hz (4:2:0), long reach, HDBaseT output card for the VS-3232 Series Modular Multi-Format Digital Matrix Switchers. DT-OUT4-F32 outputs four long reach HDBaseT signals with bidirectional RS-232 and IR from the chassis to the line.

Features
Max. Data Rate - 10.2 Gbps (3.4 Gbps per graphic channel).


System Range - 40m (130ft) - 4K60 4:2:0 or 4K30 4:4:4; 70m (230ft) - 1080p 12bit (deep color). Note: When using Kramer HDBaseT cables.


HDTV Compatible.


HDCP Compliant.


3D Pass-Through.


Bidirectional RS-232 and IR per Port.


Kramer Equalization and re-Klocking Technology.

The VS-44DT is an HDMI/HDBaseT matrix switcher with HDMI and HDBaseT output transmitters that provide video, audio, Ethernet, RS-232 and IR signal extension. The unit accepts up to four HDMI and four IR inputs as well as Ethernet and RS-232 network and control. Features

HDMI support


Non-volatile memory


Automatic output shutdown


Suitable for large conference rooms

VS-88UT is an all-in-one 4K@60Hz (4:2:0) Audio-Video presentation system with integrated range extension and an integrated control system master. The unit switches the video, embeds the audio and outputs the signal to both an HDMI and an HDBaseT 2.0 with USB extension and PoE on the HDBaseT output ports. Outstanding audio support includes balanced stereo audio, unbalanced stereo audio, and de-embedded audio sources that output to embedded audio, balanced stereo audio as well as a power amplified audio output.

VS-88UT includes a master room controller that can operate over Ethernet (LAN) with control ports that include: one bidirectional RS-485, four RS-232, four IR, four GPI/O, and eight relays to control a wide variety of AV devices. It includes a KNET™ connector interface that enables access to the master controller from auxiliary room controllers such as control keypads. The unit can also provide power to auxiliary room controllers via the KNET™ connectors. VS-88UT includes an Ethernet gateway to control and manage remote I/O ports.

Features
Resolutions up to 4K@60Hz (4:2:0)


Data Rate up to 10.2Gbps (3.4Gbps per graphics channel)


Signal Extension up to 100m at 4K @60Hz (4:2:0)


Flexible Audio Extraction, Embedding and Control


Programmable Master Room Controller


RS-232, RS-485, IR, GPI/O, and relay ports


PoE (Power over Ethernet) Provider

HDBT7-IN2-F16 is a two-channel 4K60 4:2:0 HDMI, long reach, HDBaseT input card for the VS-1616 Series Modular Multi-Format Digital Matrix Switchers.

The HDBT7-IN2-F16 inputs two long reach HDBaseT signals with bidirectional RS-232 and IR from the line to the chassis.

Features
Max. Data Rate - 10.2 Gbps (3.4 Gbps per graphic channel).


Max. Range - 40m (130ft) - 4K60 4:2:0 or 4K30 4:4:4; 70m (230ft) - 1080p 12bit (deep color). Note: When using Kramer HDBaseT cables.


HDTV Compatible.


HDCP Compliant.


3D Pass-Through.


Bidirectional RS-232 and IR per Port.


Kramer Equalization and re-Klocking Technology.

HDBT7-OUT2-F16 is a two-channel 4K60 4:2:0, long reach, HDBaseT output card for the VS-1616 Series Modular Multi-Format Digital Matrix Switchers. The HDBT7-OUT2-F16 outputs two long reach HDBaseT signals with bidirectional RS-232 and IR from the chassis to the line.

Features
Max. Data Rate - 10.2 Gbps (3.4 Gbps per graphic channel).


Max. Range - 40m (130ft) - 4K60 4:2:0 or 4K30 4:4:4; 70m (230ft) - 1080p 12bit (deep color). Note: When using Kramer HDBaseT cables.


HDTV Compatible.


HDCP Compliant.


3D Pass-Through.


Bidirectional RS-232 and IR per Port.


Kramer Equalization and re-Klocking Technology.

DTAxr-IN2-F16 is a 2-channel 4K60 4:2:0 HDMI, analog audio, bidirectional RS-232, Ethernet, & IR over HDBaseT twisted pair receiver card for the VS-1616 Series Modular Multi-Format Digital Matrix Switchers.

DTAxr-IN2-F16 inputs two extended reach HDBaseT signals with selectable embedded/de-embedded analog audio, bidirectional RS-232, Ethernet, and IR from the line to the chassis.

Features
Max. Data Rate - 10.2Gbps (3.4Gbps per graphics channel).


Max. Resolution - 4K@60Hz (4:2:0).


Analog Audio Embedding/De-embedding - On the same jack


HDBaseT Technology - HDTV compatible, HDCP compliant.


System Range - Up to 100m at normal mode (4K), up to 130m (430ft) at normal mode (2K), up to 180m (590ft) ultra mode (1080p @60Hz @24bpp). Note: When using Kramer HDBaseT cables.


Ethernet Extension - Ethernet interface data flows in both directions, allowing extension of up to 100Mbps Ethernet connectivity for LAN communication and device control.


Bidirectional RS-232 Extension - Serial interface data flows in both directions, allowing data transmission and device control.


Bidirectional Infrared Extension - IR interface data flows in both directions, allowing remote control of peripheral devices located at either end of the extended line.


3D Pass-Through.

DTAxr-OUT2-F16 is a two-channel HDMI, analog audio, bidirectional RS-232, Ethernet, & IR over HDBaseT twisted pair transmitter card for the VS-1616 Series Modular Multi-Format Digital Matrix Switchers.

The DTAxr-OUT2-F16 outputs two extended reach HDBaseT signals with selectable embedded/de-embedded analog audio, bidirectional RS-232, IR, and Ethernet from the chassis to the line.

Features
Max. Data Rate - 10.2Gbps (3.4Gbps per graphic channel).


Max. Resolution - 4K@60Hz (4:2:0).


Analog Audio Embedding/De-embedding - On the same jack


HDBaseT Technology - HDTV compatible, HDCP compliant.


System Range - Up to 100m at normal mode (4K), up to 130m (430ft) at normal mode (2K), up to 180m (590ft) ultra mode (1080p @60Hz @24bpp). Note: When using Kramer HDBaseT cables.


Ethernet Extension - Ethernet interface data flows in both directions, allowing extension of up to 100Mbps Ethernet connectivity for LAN communication and device control.


Bidirectional RS-232 Extension - Serial interface data flows in both directions, allowing data transmission and device control.


Bidirectional Infrared Extension - IR interface data flows in both directions, allowing remote control of peripheral devices located at either end of the extended line.


3D Pass-Through.

HDBT-OUT2-F16 is a two-channel HDMI, bidirectional RS-232, Ethernet, & IR over HDBaseT twisted pair transmitter card for the VS-1616 Series Modular Multi-Format Digital Matrix Switchers.

The HDBT-OUT2-F16 outputs two extended reach HDBaseT signals with bidirectional RS-232, IR, and Ethernet from the chassis to the line.

Features
Max. Data Rate - 6.75Gbps (2.25Gbps per graphic channel).


HDBaseT Technology - HDTV compatible, HDCP compliant.


System Range - Up to 130m (430ft) normal mode; up to 180m (590ft) ultra–mode (1080p @60Hz @24bpp). Note: When using Kramer HDBaseT cables.


Ethernet Extension - Ethernet interface data flows in both directions, allowing extension of up to 100Mbps Ethernet connectivity for LAN communication and device control.


Bidirectional RS–232 Extension - Serial interface data flows in both directions, allowing data transmission and device control.


Bidirectional Infrared Extension - IR interface data flows in both directions, allowing remote control of peripheral devices located at either end of the extended line.


3D Pass-Through.

HDBT-OUT4-F32 is a four-channel HDMI, bidirectional RS-232, Ethernet, & IR over HDBaseT twisted pair transmitter card for the VS-3232 Series Modular Multi-Format Digital Matrix Switchers.

The HDBT-OUT4-F32 outputs four extended reach HDBaseT signals with bidirectional RS-232, IR, and Ethernet from the chassis to the line.

Features
Max. Data Rate - 6.75Gbps (2.25Gbps per graphic channel).


HDBaseT Technology - HDTV compatible, HDCP compliant.


System Range - Up to 130m (430ft) normal mode; up to 180m (590ft) ultra-mode (1080p @60Hz @24bpp). Note: When using Kramer HDBaseT cables.


Ethernet Extension - Ethernet interface data flows in both directions, allowing extension of up to 100Mbps Ethernet connectivity for LAN communication and device control.


Bidirectional RS-232 Extension - Serial interface data flows in both directions, allowing data transmission and device control.


Bidirectional Infrared Extension - IR interface data flows in both directions, allowing remote control of peripheral devices located at either end of the extended line.


3D Pass-Through.

HDBT-IN4-F32 is a four-channel HDMI, bidirectional RS-232, Ethernet, & IR over HDBaseT twisted pair receiver card for the VS-3232 Series Modular Multi-Format Digital Matrix Switchers.

The HDBT-IN4-F32 inputs four extended reach HDBaseT signals with bidirectional RS-232, Ethernet, and IR from the line to the chassis.

Features
Max. Data Rate - 6.75Gbps (2.25Gbps per graphic channel).


HDBaseT Technology - HDTV compatible, HDCP compliant.


System Range - Up to 130m (430ft) normal mode; up to 180m (590ft) ultra-mode (1080p @60Hz @24bpp). Note: When using Kramer HDBaseT cables.


Ethernet Extension - Ethernet interface data flows in both directions, allowing extension of up to 100Mbps Ethernet connectivity for LAN communication and device control.


Bidirectional RS-232 Extension - Serial interface data flows in both directions, allowing data transmission and device control.


Bidirectional Infrared Extension - IR interface data flows in both directions, allowing remote control of peripheral devices located at either end of the extended line.


3D Pass-Through.