The HPE S4R22A Aruba Networking CX 6000 8G 2F Switch is part of the HPE Aruba Networking CX 6000 Switch Series, a modern family of entry-level Layer 2 access switches designed for branch offices, midsize businesses, and small enterprises. This compact, non-PoE switch delivers reliable Gigabit Ethernet connectivity, flexible fibre uplinks, and a consistent operational experience powered by the Aruba CX operating system.
Key Features of HPE Aruba Networking S4R22A CX 6000 8G Switch
8 x 10/100/1000BASE-T Gigabit Ethernet access ports
2 x 1GbE SFP uplink ports for fibre connectivity
Fully managed enterprise-class Layer 2 switching
Compact, fanless design for space- and noise-sensitive environments
Aruba CX Switch Operating System for consistent management
Support for ACLs, QoS, traffic prioritisation, sFlow®, and IPv6
No software licensing or subscription requirements
Compact Entry-Level Layer 2 Access Switching
The HPE Aruba Networking CX 6000 Series provides dependable Gigabit Ethernet access in a small form factor ideal for branch offices, remote sites, and edge deployments. With enterprise-grade Layer 2 capabilities and support for static routing, the CX 6000 delivers secure and predictable wired connectivity for everyday business needs.
Consistent Aruba CX Operating Experience
Built on the Aruba CX Switch Operating System, the CX 6000 series delivers a simple and consistent operator experience across Aruba CX switching platforms. This common architecture reduces operational complexity, shortens learning curves, and simplifies deployment and troubleshooting.
Fanless, Quiet Design
The fanless design makes the S4R22A ideal for noise-sensitive environments such as offices, classrooms, retail spaces, and healthcare locations. Its compact footprint allows flexible placement without compromising reliability or performance.
High-Performance and Energy-Efficient Architecture
Designed with a dedicated Aruba ASIC, the CX 6000 series delivers low latency, increased packet buffering, and optimised power consumption. This architecture supports modern access-layer requirements, including AI-driven applications, Wi-Fi 7 connectivity, and growing IoT environments.
Flexible Fibre Uplink Connectivity
Two built-in 1GbE SFP uplink ports provide wire-speed connectivity to aggregation or core switches, helping eliminate access-layer bottlenecks and enabling fibre extension where required.
Simplified Configuration and Management
The CX 6000 Series supports flexible management options including HPE Aruba Networking Central, Switch Multi-Edit Software, an easy-to-use web GUI, or an industry-standard CLI. These tools streamline both initial deployment and ongoing configuration changes.
Automation and Software-Defined Ready
With built-in REST APIs, the CX 6000 is ready for software-defined networking and automation. Features such as colourless ports, local user roles, and local MAC authentication help reduce manual operational effort while maintaining consistent network policies during adds, moves, and changes.
The HPE Aruba Networking R8N89B 6000 8G CL4 2SFP PoE 67W Switch is part of the HPE Aruba Networking CX 6000 Switch Series, delivering compact, entry-level Layer 2 access switching for branch offices, midsize businesses, and small enterprises. Designed for space-constrained and edge deployments, this fanless switch provides Gigabit Ethernet connectivity, integrated Class 4 Power over Ethernet, and simplified operations powered by the Aruba CX operating system.
Key Features of HPE Aruba Networking R8N89B CX 6000 8G PoE Switch
8 x 10/100/1000BASE-T ports with IEEE 802.3at Class 4 PoE
2 x 1GbE SFP uplink ports for fibre connectivity
67W total PoE budget supporting up to 30W per port
Compact, fanless design for quiet environments
Fully managed enterprise-class Layer 2 switching
Aruba CX Switch Operating System for consistent management
No software licensing or subscription requirements
Ultra-Compact Layer 2 Access Switching
The HPE Aruba Networking CX 6000 Series provides reliable Gigabit Ethernet access in a compact form factor ideal for small offices, remote sites, and edge locations. With enterprise-grade Layer 2 features and support for static routing, the CX 6000 ensures secure and predictable wired connectivity.
Integrated Class 4 PoE for Edge Devices
With a 67W PoE budget and IEEE 802.3at Class 4 support, this switch can power wireless access points, IP phones, cameras, and IoT devices directly from the network. This simplifies deployments and reduces the need for additional power infrastructure at the edge.
Fanless, Quiet Operation
The fanless design makes the R8N89B ideal for noise-sensitive environments such as offices, classrooms, retail spaces, and healthcare settings. Its small footprint allows flexible placement while maintaining enterprise reliability.
High-Performance, Energy-Efficient Architecture
Built with a dedicated Aruba ASIC, the CX 6000 series delivers low latency, increased packet buffering, and optimised power consumption. This architecture supports modern access-layer requirements including AI-driven applications, Wi-Fi 7, and IoT connectivity.
Flexible Fibre Uplink Connectivity
Two integrated 1GbE SFP uplink ports provide wire-speed connections to aggregation or core switches, helping eliminate access-layer bottlenecks and enabling fibre extension where required.
Simplified Configuration and Management
The CX 6000 Series supports flexible management through HPE Aruba Networking Central, Switch Multi-Edit Software, an easy-to-use web GUI, or an industry-standard CLI. These options reduce operational complexity for both initial deployment and ongoing changes.
Automation and Software-Defined Ready
With built-in REST APIs, the CX 6000 is ready for software-defined networking and automation. Features such as colourless ports, local user roles, and local MAC authentication help minimise manual tasks while maintaining consistent network policies.
The HPE Aruba Networking R8N86B 6000 48G 4SFP Switch is part of the HPE Aruba Networking CX 6000 Switch Series, a modern family of entry-level Layer 2 access switches built for branch offices, midsize businesses, and small enterprises. Designed for reliable Gigabit Ethernet connectivity without PoE, this switch delivers a consistent operational experience, flexible uplink options, and simplified management using the Aruba CX operating system.
Key Features of HPE Aruba Networking R8N86B CX 6000 48G Switch
48 x 10/100/1000BASE-T Gigabit Ethernet access ports
4 x 1GbE SFP uplink ports for fibre connectivity
Fully managed enterprise-class Layer 2 switching
Aruba CX Switch Operating System across CX platforms
Support for ACLs, QoS, traffic prioritisation, sFlow®, and IPv6
Multiple management options including Central, Web GUI, CLI, and REST APIs
No software licensing or subscription requirements
Entry-Level Layer 2 Access Switching
The HPE Aruba Networking CX 6000 Series provides dependable Gigabit Ethernet access designed for enterprise edge and SMB environments. With robust Layer 2 capabilities and support for static routing, the CX 6000 delivers secure, stable, and predictable network performance for everyday business operations.
Consistent Aruba CX Operating Experience
Built on the Aruba CX Switch Operating System, the CX 6000 series offers a simple and consistent operator experience across Aruba CX switching platforms. This common architecture reduces training time and operational complexity while enabling streamlined deployment and troubleshooting.
High-Performance, Energy-Efficient Design
The CX 6000 switch is designed with a dedicated Aruba ASIC that delivers low latency, increased packet buffering, and optimised power efficiency. This architecture supports modern application demands, including AI-driven workloads, Wi-Fi 7 connectivity, and growing IoT environments at the access layer.
Flexible Fibre Uplink Connectivity
Four built-in 1GbE SFP uplink ports provide wire-speed connectivity to aggregation or core switches. These uplinks help eliminate access-layer bottlenecks and allow organisations to extend fibre where required while maintaining a compact 1U switch footprint.
Simplified Configuration and Management
The CX 6000 Series supports flexible management through HPE Aruba Networking Central, Switch Multi-Edit Software, an intuitive web GUI, or an industry-standard CLI. These options allow IT teams to efficiently manage initial deployments and ongoing configuration changes across the network.
Automation and Software-Defined Ready
With built-in REST APIs, the CX 6000 is ready for software-defined networking and automation. Features such as colourless ports, local user roles, and local MAC authentication reduce manual effort and simplify adds, moves, and changes while maintaining policy consistency.
The HPE Aruba Networking CX 6000 48G CL4 4SFP 740W Switch is a fully managed, entry-level Layer 2 access switch designed for branch offices, midsize businesses and small enterprises. Built on the Aruba CX operating system and powered by a modern ASIC, it delivers reliable gigabit access, integrated uplinks and up to 740W of Class 4 PoE to support wireless access points, IoT devices and cloud-driven workloads—while keeping deployment and operations simple.
Key Features of HPE Aruba Networking R9Y03B 48 Port Access Switch
48 x 10/100/1000Mbps access ports with Class 4 PoE (802.3at)
4 x 1GbE SFP uplinks for aggregation
Up to 740W total PoE budget
Fully managed Layer 2 feature set with static routing support
Aruba CX Switch Operating System for consistent operations
Flexible management via Aruba Central, Web GUI, CLI and REST APIs
Entry-Level Access for Modern Networks
The CX 6000 series is purpose-built to provide dependable wired access for IoT, mobile and cloud applications. With enterprise-class Layer 2 capabilities, QoS, ACLs, sFlow® and IPv6 support, it delivers the functionality required at the access layer without added licensing complexity.
Integrated PoE for IoT and Wireless
With up to 740W of IEEE 802.3at Class 4 PoE, the switch can power a broad range of devices such as security cameras, phones and wireless access points directly from the network-reducing the need for local power adapters and simplifying deployments.
Built-In Uplinks to Remove Bottlenecks
Four integrated 1GbE SFP uplinks provide straightforward aggregation to distribution switches, helping prevent access-layer congestion as user and device counts grow.
Simple, Flexible Management
The CX 6000 can be managed through HPE Aruba Networking Central for unified wired, wireless and WAN operations, or via an easy-to-use Web GUI, industry-standard CLI and REST APIs. Switch Multi-Edit Software enables automation and fast, network-wide configuration updates.
AI-Ready Performance and Efficiency
A dedicated ASIC delivers low latency, increased buffering and optimised power consumption—supporting the demands of AI-assisted operations, Wi-Fi 7 readiness and dense IoT environments while maintaining energy efficiency.
Right-Sized, Cost-Effective Deployment
Available in multiple port densities across the CX 6000 family, this 48-port model provides a practical balance of scale and power. With no additional software licensing required and a consistent Aruba CX OS experience, it simplifies ownership and long-term operations for growing networks.
The HPE Aruba Networking R8N89B 6000 12G CL4 2SFP PoE 139W Switch is part of the HPE Aruba Networking CX 6000 Switch Series, delivering compact, entry-level Layer 2 access switching for branch offices, midsize businesses, and small enterprises. Designed for space-constrained environments, this fanless switch combines Gigabit Ethernet connectivity, integrated Class 4 Power over Ethernet, and the Aruba CX operating system to provide reliable wired access for wireless, client, and IoT devices.
Key Features of HPE Aruba Networking R8N89B CX 6000 12G PoE Switch
12 x 10/100/1000BASE-T ports with IEEE 802.3at Class 4 PoE
2 x 1GbE SFP uplink ports for fibre connectivity
139W total PoE budget supporting up to 30W per port
Compact, fanless design ideal for quiet or space-limited deployments
Fully managed enterprise-class Layer 2 switching
Aruba CX Switch Operating System for consistent management
No software licensing or subscription requirements
Compact Entry-Level Layer 2 Access Switching
The HPE Aruba Networking CX 6000 Series offers dependable Gigabit Ethernet access in a compact form factor suited to branch offices and SMB environments. With full Layer 2 functionality and support for static routing, the CX 6000 delivers secure, stable, and predictable wired connectivity where space and noise constraints are critical.
Integrated Class 4 PoE for Wireless and IoT
With a 139W PoE budget and IEEE 802.3at Class 4 support, the R8N89B can power wireless access points, IP phones, cameras, and IoT devices directly from the switch. This reduces the need for additional power sources and simplifies deployment in smaller or distributed locations.
Quiet, Fanless Design
The fanless design makes this switch ideal for noise-sensitive environments such as offices, classrooms, retail spaces, or healthcare settings. Its compact footprint allows flexible placement without compromising enterprise-grade performance or reliability.
High-Performance and Energy-Efficient Architecture
Powered by a dedicated Aruba ASIC, the CX 6000 series delivers low latency, increased packet buffering, and optimised power consumption. This architecture supports modern access-layer demands, including AI-driven applications, Wi-Fi 7 connectivity, and expanding IoT ecosystems.
Flexible Fibre Uplink Connectivity
Two built-in 1GbE SFP uplink ports provide wire-speed connectivity to aggregation or core switches, helping remove access-layer bottlenecks while enabling fibre extension where required.
Simplified Configuration and Management
The CX 6000 Series supports flexible management through HPE Aruba Networking Central, Switch Multi-Edit Software, an easy-to-use web GUI, or an industry-standard CLI. These options streamline both initial deployment and ongoing configuration changes.
Automation and Software-Defined Ready
With built-in REST APIs, the CX 6000 is ready for software-defined networking and automation. Features such as colourless ports, local user roles, and local MAC authentication help reduce manual effort and simplify adds, moves, and changes while maintaining consistent network policies.
The HPE Aruba Networking R8N85B 6000 48G CL4 4SFP PoE 370W Switch is part of the HPE Aruba Networking CX 6000 Switch Series, a modern entry-level Layer 2 access switching platform designed for branch offices, midsize businesses, and small enterprises. Built on the Aruba CX operating system, this switch delivers reliable Gigabit connectivity, integrated Class 4 PoE, and simplified management options to support today’s wired, wireless, and IoT environments.
Key Features of HPE Aruba Networking R8N85B CX 6000 48G PoE Switch
48 x 10/100/1000BASE-T ports with IEEE 802.3at Class 4 PoE
4 x 1GbE SFP uplink ports for flexible fibre connectivity
370W total PoE budget supporting up to 30W per port
Enterprise-grade Layer 2 features with static routing and ACLs
Aruba CX Switch Operating System for consistent management
Multiple management options including Central, Web GUI, CLI, and REST APIs
No software licensing or subscriptions required
Entry-Level Layer 2 Access Switching
The HPE Aruba Networking CX 6000 Series provides dependable Gigabit Ethernet access designed specifically for enterprise edge and SMB deployments. With full Layer 2 functionality, including VLANs, access control lists (ACLs), quality of service (QoS), traffic prioritisation, sFlow®, and IPv6 support, the CX 6000 delivers the essential features required for secure and stable access networks.
Integrated Class 4 PoE for Wireless and IoT
This model offers a 370W PoE budget with IEEE 802.3at Class 4 support, enabling up to 30W per port. This makes it ideal for powering wireless access points, IP phones, cameras, and IoT devices without the need for additional power infrastructure. Built-in PoE simplifies deployments while maintaining clean and efficient network designs.
Optimised Performance and Power Efficiency
Powered by a dedicated Aruba ASIC, the CX 6000 series delivers low latency, increased packet buffering, and efficient power consumption. This architecture is well-suited for AI-driven applications, Wi-Fi 7 access, and high-density IoT environments, ensuring consistent performance at the access layer where users and devices connect.
Built-In Fibre Uplinks
Four integrated 1GbE SFP uplink ports provide wire-speed connectivity to aggregation or core switches, removing access-layer bottlenecks. This flexibility allows organisations to extend fibre where needed while maintaining a compact and cost-effective access switch footprint.
Simplified Configuration and Management
The CX 6000 Switch Series supports a range of management options to suit different operational models. Administrators can manage the switch using HPE Aruba Networking Central for unified cloud management, Switch Multi-Edit Software for rapid bulk configuration, an intuitive web GUI, or an industry-standard command-line interface.
Automation and Software-Defined Ready
With support for REST APIs, the CX 6000 series is ready for software-defined networking and automation. Features such as colourless ports, local user roles, and local MAC authentication reduce manual configuration effort, making it easier to accommodate adds, moves, and changes while maintaining policy consistency across the network.
The HPE Aruba R8N88B 6000 24G 4SFP Switch is part of the HPE Aruba Networking CX 6000 Switch Series, a modern range of entry-level Layer 2 access switches designed for branch offices, midsize businesses, and small enterprises. Delivering reliable Gigabit Ethernet connectivity without PoE, this switch combines enterprise-grade features, flexible fibre uplinks, and simplified operations using the Aruba CX operating system.
Key Features of HPE Aruba Networking R8N88B CX 6000 24G Switch
24 x 10/100/1000BASE-T Gigabit Ethernet access ports
4 x 1GbE SFP uplink ports for fibre connectivity
Fully managed enterprise-class Layer 2 switching
Aruba CX Switch Operating System for consistent management
Support for ACLs, QoS, traffic prioritisation, sFlow®, and IPv6
Multiple management options including Central, Web GUI, CLI, and REST APIs
No software licensing or subscription requirements
Entry-Level Layer 2 Access Switching
The HPE Aruba Networking CX 6000 Series provides dependable Gigabit Ethernet access for enterprise edge and SMB environments. With robust Layer 2 functionality and support for static routing, the CX 6000 enables secure, stable, and predictable wired access connectivity for everyday business needs.
Consistent Aruba CX Operating Experience
Built on the Aruba CX Switch Operating System, the CX 6000 series delivers a simple and consistent operator experience across Aruba CX switching platforms. This shared architecture reduces operational complexity, shortens learning curves, and simplifies deployment and troubleshooting.
High-Performance, Energy-Efficient Design
Designed with a dedicated Aruba ASIC, the CX 6000 switch delivers low latency, increased packet buffering, and optimised power efficiency. This architecture supports modern access-layer demands including AI-driven applications, Wi-Fi 7 connectivity, and growing IoT environments.
Flexible Fibre Uplink Connectivity
Four built-in 1GbE SFP uplink ports provide wire-speed connectivity to aggregation or core switches, helping remove access-layer bottlenecks. This flexibility allows organisations to extend fibre where required while maintaining a compact 1U switch footprint.
Simplified Configuration and Management
The CX 6000 Series supports flexible management through HPE Aruba Networking Central, Switch Multi-Edit Software, an intuitive web GUI, or an industry-standard CLI. These tools simplify both initial deployment and ongoing configuration changes across the network.
Automation and Software-Defined Ready
With built-in REST APIs, the CX 6000 is ready for software-defined networking and automation. Features such as colourless ports, local user roles, and local MAC authentication reduce manual operational effort while maintaining consistent network policies during adds, moves, and changes.
The HPE Aruba R8N87B 6000 24G CL4 4SFP PoE 370W Switch is part of the HPE Aruba Networking CX 6000 Switch Series, delivering modern, entry-level Layer 2 access switching for branch offices, midsize businesses, and small enterprises. With integrated Class 4 Power over Ethernet, Gigabit Ethernet connectivity, and the Aruba CX operating system, this switch provides reliable wired access, simplified operations, and support for wireless, client, and IoT devices.
Key Features of HPE Aruba Networking R8N87B CX 6000 24G PoE Switch
24 x 10/100/1000BASE-T ports with IEEE 802.3at Class 4 PoE
4 x 1GbE SFP uplink ports for flexible fibre connectivity
370W total PoE budget with up to 30W per port
Fully managed enterprise-class Layer 2 switching
Aruba CX Switch Operating System for consistent management
Support for ACLs, QoS, traffic prioritisation, sFlow®, and IPv6
No software licensing or subscriptions required
Entry-Level Layer 2 Access Switching
The HPE Aruba Networking CX 6000 Series delivers dependable Gigabit Ethernet access designed for enterprise edge and SMB environments. With robust Layer 2 features and support for static routing, the CX 6000 enables secure, stable, and predictable network connectivity for everyday business operations.
Integrated Class 4 PoE for Modern Devices
With a 370W PoE budget and IEEE 802.3at Class 4 support, this switch can power wireless access points, IP phones, cameras, and IoT devices directly from the network. This reduces the need for separate power infrastructure while simplifying deployment and ongoing management.
High-Performance and Energy-Efficient Architecture
Designed with a dedicated Aruba ASIC, the CX 6000 series delivers low latency, increased packet buffering, and optimised power consumption. This architecture supports modern workloads including AI-driven applications, Wi-Fi 7 connectivity, and high-density IoT environments at the access layer.
Flexible Fibre Uplink Connectivity
Four built-in 1GbE SFP uplink ports provide wire-speed connections to aggregation or core switches, helping eliminate access-layer bottlenecks. This flexibility allows organisations to extend fibre where needed while maintaining a compact 1U switch footprint.
Simplified Configuration and Management
The CX 6000 Series supports multiple management options, including HPE Aruba Networking Central, Switch Multi-Edit Software, an intuitive web GUI, and an industry-standard CLI. These tools simplify initial deployment and ongoing configuration changes across the network.
Automation and Software-Defined Ready
With built-in REST APIs, the CX 6000 is ready for software-defined networking and automation. Features such as colourless ports, local user roles, and local MAC authentication help reduce manual effort and simplify adds, moves, and changes while maintaining consistent network policies.
The HPE Aruba Networking R8N88A 6000 Series 24G 4SFP Managed Switch is designed to deliver dependable, secure, and
high-performance wired access for branch offices, midsize businesses, and small enterprise environments. Built on a
modern, software-defined architecture, it combines simplified deployment with advanced traffic control, security,
and flexible management options.
Key Features of HPE Aruba Networking 6000 Series 24G 4SFP
24 Gigabit Ethernet access ports with 4 SFP uplinks for scalable network expansion
Up to 56 Gbps non-blocking switching capacity and 41.6 Mpps forwarding performance
Modern AOS-CX operating system with REST APIs and database-driven architecture
Advanced Layer 2 features including VLANs, QoS, ACLs, and traffic prioritisation
Compact, fanless design suited for quiet and space-limited installations
Flexible management via Web GUI, CLI, Aruba NetEdit, and Aruba Central
Modern AOS-CX software foundation
Powered by AOS-CX, the Aruba 6000 Series uses a modular Linux-based architecture with a centralised state database.
This design enables near real-time visibility, improved resiliency, and fine-grained programmability through REST
APIs and micro-services, extending enterprise-class capabilities into access-layer deployments.
Aruba ASIC-driven performance
Internally developed Aruba ASICs deliver low latency, deep packet buffering, and adaptive power efficiency.
Selectable queue configurations and large buffers ensure predictable application performance, even during periods
of network congestion.
Secure and resilient access layer
Integrated security features include identity-based access controls, IPv4 and IPv6 ACLs, port-based authentication,
and control-plane protection. High availability is supported through link aggregation, spanning tree protocols,
loop protection, and proactive fault detection mechanisms.
Simplified operations and automation
Designed to reduce operational overhead, the switch supports colourless ports, role-based policies, and automated
configuration changes. Aruba NetEdit enables centralised configuration, validation, and deployment across multiple
switches for consistent policy enforcement at scale.
Manage it your way
The CX 6000 Series supports cloud-based and on-premise management using the same hardware, allowing organisations to
adapt as operational requirements evolve. Unified visibility across wired, wireless, and WAN environments helps
maintain consistent control across networks of any size.
The HPE Aruba Networking 6000 Series 12G Layer 3 PoE 2G/2SFP Managed Switch (R8N89A) is designed for reliable and secure access in branch offices, midsize businesses, and small enterprises. Here are some key features:12 Gigabit Ethernet Ports: Provides ample connectivity for various devices.
2 SFP Uplink Ports: Offers flexibility for network expansion and high-speed uplinks.
Layer 3 Capabilities: Supports advanced features like static routing, ACLs, robust QoS, and VLANs.
Power over Ethernet (PoE): Delivers up to 139W of PoE to support IoT devices such as security cameras and wireless APs.
Flexible Management Options: Includes Web GUI, CLI, Aruba NetEdit, and Aruba Central for simplified management.
Compact and Fanless Design: Ideal for quiet, space-constrained deployments
This switch is designed to simplify IT operations with reliable, secure, and cost-effective wired access connectivity.
Main Features
Simplify IT operations with modern Layer 2 Gigabit Ethernet switch series that provides entry level, reliable, and convenient wired access connectivity.
Convenient built-in 1GbE uplinks and up to 370W of Class 4 PoE for support of access points, client, and IoT devices.
Compact and fanless 12 port PoE model for space-constrained deployments.
Flexibility to manage with Aruba Central, easy to use Web GUI, CLI, or Aruba NetEdit.
Software defined ready with REST APIs.
HPE Limited Lifetime Warranty with no switch software licensing required.
Simple, secure, and reliable
This enterprise-class Layer 2 switch series is ready for quick deployment with plenty of PoE, speed, and robust security features to safely connect and power your access points, client devices, and IoT.
Right size for your business
Deploy the number of Ethernet ports and PoE power that’s best for you and your budget with plug and play 12-, 24-, and 48-port Ethernet models with up to 370W PoE.
Manage it your way
No matter how big or small your network management needs, the CX 6000 has you covered with choices that include easy-to-use Web GUI, CLI, Aruba NetEdit, and Aruba Central (available soon) for single pane of glass management across your enterprise network.
Product Specification
Ports
12x 10/100/1000Base-T ports
2x 1G SFP ports
2x 1GbE ports
POE Power
Power Supply
Up to 139W of Class 4 PoE
Internal (fixed) power supply, fanless
Dimensions
(H) 4.39 cm x (W) 25.4 cm x (D) 25.5 cm (1.73" x 10.0" x 10.04")
Weight
2.78 kg (6.13 lbs)
Performance
System Switching Capacity: Up to 104 Gbps
System Throughput Capacity: Up to 77.3 Mpps
Management ports
1x USB-C console port
1x USB Type-A host port
Mounting
Mounts in an EIA-standard 19 in. Telco rack or equipment cabinet. Horizontal surface mounting only. 2-post rack kit included.
Environmental
Operating temperature: 32°F to 113°F (0°C to 45°C) up to 5,000 ft. Derate -1°C degree C for every 1,000 ft. from 5,000 ft. to 10,000 ft.
Operating Relative Humidity: 15% to 95% @ 104°F (40°C) noncondensing
Non-Operating: -40°F to 158°F (-40°C to 70°C) up to 15,000 ft.
Non-Operating Storage relative humidity: 15% to 90% @ 149°F (65°C) noncondensing
Max. Operating Altitude: 10,000 feet (3.04 km)
Max Non-operating Altitude: 15,000 feet (4.6 km)
Acoustics:
Sound Power (LWAd) range: 0 - 4.3 Bel
Sound Pressure (LpAm) (Bystander) range: 0 - 29.8 dB
Electrical characteristics
Frequency range: 50-60 Hz
AC Voltage: 100-240 volts
Maximum current range: 4.91A - 0.5A
Safety
UL 60950-1; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1;
EN 60825-1; UL 62368-1 Ed. 2; IEC 62368-1 Ed. 2; EN 62368-1:2014
Emissions
VCCI-CISPR 32, Class A;
CNS 13438;
ICES-003 Issue 6 Class A;
FCC CFR 47 Part 15, Class A;
EN 55032: 2015 +AC:2016 /CISPR-32, Class A
Immunity
Generic: CISPR 24 / CISPR 35
EN: EN 55024:2010 / EN 55035:2017
ESD: IEC 61000-4-2
Radiated: IEC 61000-4-3
EFT/Burst: IEC 61000-4-4
Surge: IEC 61000-4-5
Conducted Immunity: IEC 61000-4-6
Power frequency magnetic field: IEC 61000-4-8
Voltage dips and interruptions: IEC 61000-4-11
Harmonics: IEC/EN 61000-3-2
Flicker: IEC/EN 61000-3-3
The HPE Aruba Networking CX 6000 48G 4SFP Switch (R8N86A) is a powerful, entry-level Layer 2 Gigabit Ethernet switch built to meet the demands of modern branch offices, growing SMBs, and midsize enterprise networks. Designed for simplicity, reliability, and scalability, this fully-managed switch provides 48x 10/100/1000BASE-T ports for high-density wired connectivity, along with 4x 1G SFP uplinks for seamless network integration and uplink redundancy.
Powered by the Aruba AOS-CX operating system, the R8N86A ensures a consistent user experience across the CX switch portfolio and offers advanced features such as ACLs, QoS, sFlow, IPv6, and static routing, delivering enterprise-class functionality without the complexity or cost of traditional solutions.
With a compact 1U design, low power consumption, and license-free management, the CX 6000 48G is a cost-effective solution for organisations deploying IoT, voice, and cloud-based applications. It's ideal for high-density environments where performance, scalability, and operational simplicity are key.
Key Features
48 x 10/100/1000BASE-T ports
4 x 1G SFP ports
1 x USB-C Console Port
1 x USB Type-A Host port
Fixed power supply
Fixed fans
Limited lifetime warranty
Simple, secure, and reliable
This enterprise-class Layer 2 switch series is ready for quick deployment and robust security features to safely connect and power your access points, client devices, and IoT.
Right size for your business
Deploy the number of Ethernet ports that’s best for you and your budget with plug and play 12-, 24-, and 48-port Ethernet models.
Manage it your way
No matter how big or small your network management needs, the CX 6000 has you covered with choices that include easy-to-use Web GUI, CLI, Aruba NetEdit, and Aruba Central (available soon) for single pane of glass management across your enterprise network.
Product Specification
Ports48x ports 10/100/1000Base-T ports
4x 1G SFP portsPower SupplyInternal (fixed) power supply, fixed fansDimensions(H) 4.39 cm x (W) 44.2 cm x (D) 24.74 cm (1.73" x 17.4" x 9.74")Weight3.42 kg (7.54 lbs)PerformanceSystem Switching Capacity: Up to 104 Gbps
System Throughput Capacity: Up to 77.3 MppsManagement ports1x USB-C console port
1x USB Type-A host portMountingMounts in an EIA-standard 19 in. Telco rack or equipment cabinet. Horizontal surface mounting only. 2-post rack kit included.EnvironmentalOperating temperature: 32°F to 113°F (0°C to 45°C) up to 5,000 ft. Derate -1°C degree C for every 1,000 ft. from 5,000 ft. to 10,000 ft.
Operating Relative Humidity: 15% to 95% @ 104°F (40°C) noncondensing
Non-Operating: -40°F to 158°F (-40°C to 70°C) up to 15,000 ft.
Non-Operating Storage relative humidity: 15% to 90% @ 149°F (65°C) noncondensing
Max. Operating Altitude: 10,000 feet (3.04 km)
Max Non-operating Altitude: 15,000 feet (4.6 km)
Acoustics:
Sound Power (LWAd) range: 0 - 4.3 Bel
Sound Pressure (LpAm) (Bystander) range: 0 - 29.8 dBElectrical characteristicsFrequency range: 50-60 Hz
AC Voltage: 100-240 volts
Maximum current range: 4.91A - 0.5ASafetyUL 60950-1; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1; EN 60825-1; UL 62368-1 Ed. 2; IEC 62368-1 Ed. 2; EN 62368-1:2014EmissionsVCCI-CISPR 32, Class A; CNS 13438; ICES-003 Issue 6 Class A; FCC CFR 47 Part 15, Class A; EN 55032: 2015 +AC:2016 /CISPR-32, Class AImmunityGeneric: CISPR 24 / CISPR 35
EN: EN 55024:2010 / EN 55035:2017
ESD: IEC 61000-4-2
Radiated: IEC 61000-4-3
EFT/Burst: IEC 61000-4-4
Surge: IEC 61000-4-5
Conducted Immunity: IEC 61000-4-6
Power frequency magnetic field: IEC 61000-4-8
Voltage dips and interruptions: IEC 61000-4-11
Harmonics: IEC/EN 61000-3-2
Flicker: IEC/EN 61000-3-3
The HPE Aruba Networking 6000 Series 48G Managed Switch (R8N85A) is designed for reliable and secure access in branch offices, midsize businesses, and small enterprises. Here are some key features:48 Gigabit Ethernet Ports: Provides ample connectivity for various devices.
4 SFP Uplink Ports: Offers flexibility for network expansion and high-speed uplinks.
Layer 2 Capabilities: Supports essential features like ACLs, robust QoS, and traffic prioritization.
Power over Ethernet (PoE): Delivers up to 370W of PoE to support IoT devices such as security cameras and wireless APs.
Flexible Management Options: Includes Web GUI, CLI, Aruba NetEdit, and Aruba Central for simplified management.
Compact and Fanless Design: Ideal for quiet, space-constrained deployments.
This switch is designed to simplify IT operations with reliable, secure, and cost-effective wired access connectivity.
Main Features
Simplify IT operations with modern Layer 2 Gigabit Ethernet switch series that provides entry level, reliable, and convenient wired access connectivity.
Convenient built-in 1GbE uplinks and up to 370W of Class 4 PoE for support of access points, client, and IoT devices.
Compact and fanless 12 port PoE model for space-constrained deployments.
Flexibility to manage with Aruba Central, easy to use Web GUI, CLI, or Aruba NetEdit.
Software defined ready with REST APIs.
HPE Limited Lifetime Warranty with no switch software licensing required.
Simple, secure, and reliable
This enterprise-class Layer 2 switch series is ready for quick deployment with plenty of PoE, speed, and robust security features to safely connect and power your access points, client devices, and IoT.
Right size for your business
Deploy the number of Ethernet ports and PoE power that’s best for you and your budget with plug and play 12-, 24-, and 48-port Ethernet models with up to 370W PoE.
Manage it your way
No matter how big or small your network management needs, the CX 6000 has you covered with choices that include easy-to-use Web GUI, CLI, Aruba NetEdit, and Aruba Central (available soon) for single pane of glass management across your enterprise network.
Product Specification
Ports
48x PoE 10/100/1000Base-T ports (Up to 370W Class 4 PoE)
4x 1G SFP ports
Power Supply
Internal (fixed) power supply, fixed fans
Dimensions
(H) 4.39 cm x (W) 44.2 cm x (D) 30.48 cm (1.73" x 17.4" x 12.0")
Weight
5.02 kg (11.07 lbs)
Performance
System Switching Capacity: Up to 104 Gbps
System Throughput Capacity: Up to 77.3 Mpps
Management ports
1x USB-C console port
1x USB Type-A host port
Mounting
Mounts in an EIA-standard 19 in. Telco rack or equipment cabinet. Horizontal surface mounting only. 2-post rack kit included.
Environmental
Operating temperature: 32°F to 113°F (0°C to 45°C) up to 5,000 ft. Derate -1°C degree C for every 1,000 ft. from 5,000 ft. to 10,000 ft.
Operating Relative Humidity: 15% to 95% @ 104°F (40°C) noncondensing
Non-Operating: -40°F to 158°F (-40°C to 70°C) up to 15,000 ft.
Non-Operating Storage relative humidity: 15% to 90% @ 149°F (65°C) noncondensing
Max. Operating Altitude: 10,000 feet (3.04 km)
Max Non-operating Altitude: 15,000 feet (4.6 km)
Acoustics:
Sound Power (LWAd) range: 0 - 4.3 Bel
Sound Pressure (LpAm) (Bystander) range: 0 - 29.8 dB
Electrical characteristics
Frequency range: 50-60 Hz
AC Voltage: 100-240 volts
Maximum current range: 4.91A - 0.5A
Safety
UL 60950-1; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1;
EN 60825-1; UL 62368-1 Ed. 2; IEC 62368-1 Ed. 2; EN 62368-1:2014
Emissions
VCCI-CISPR 32, Class A;
CNS 13438;
ICES-003 Issue 6 Class A;
FCC CFR 47 Part 15, Class A;
EN 55032: 2015 +AC:2016 /CISPR-32, Class A
Immunity
Generic: CISPR 24 / CISPR 35
EN: EN 55024:2010 / EN 55035:2017
ESD: IEC 61000-4-2
Radiated: IEC 61000-4-3
EFT/Burst: IEC 61000-4-4
Surge: IEC 61000-4-5
Conducted Immunity: IEC 61000-4-6
Power frequency magnetic field: IEC 61000-4-8
Voltage dips and interruptions: IEC 61000-4-11
Harmonics: IEC/EN 61000-3-2
Flicker: IEC/EN 61000-3-3
.jpg?)
