The Excel Enbeam 2 Way External 5/3.5 mm Blowing Tube Green (200EBT2WEXGN) is a durable duct-installable microduct solution designed for the external distribution of blown fibre networks. Featuring a robust HDPE outer sheath, low-friction internal tube coating and colour-coded tube identification, this 2-way blowing tube enables efficient fibre deployment while providing excellent protection against installation stresses, impact and crushing in outdoor environments.
Key Features of Excel 200EBT2WEXGN
2-way external 5/3.5 mm blowing tube configuration
Duct-installable design for external fibre distribution
High Density Polyethylene (HDPE) outer sheath
Low-friction inner coating for enhanced blowing performance
Colour-coded internal tubes for easy identification
Crush and impact resistant construction
Suitable for branching and network expansion
Compatible with Enbeam push-fit blown tube connectors
Available in multiple bundle configurations across the range
RoHS compliant
Designed for External Fibre Networks
Engineered for direct installation within existing duct systems, this external blowing tube provides a reliable pathway for blown fibre deployment in outdoor network infrastructures.
Durable HDPE Outer Sheath
The High Density Polyethylene sheath delivers excellent durability and abrasion resistance, helping the tube withstand installation forces encountered when pulling through ducts.
Low-Friction Fibre Installation
Each internal tube features a specialised low-friction coating designed to minimise drag, helping maximise blowing distances and improve installation efficiency.
Simple Tube Identification
Colour-coded internal tubes allow installers to quickly identify individual pathways, simplifying network management, installation and future maintenance tasks.
Flexible Branching Capability
The tubes can be easily broken out from the main sheath and branched off where required, providing flexibility for network growth and distribution points.
Connector Compatibility
Designed for use with Enbeam push-fit blown tube connectors, the system supports straightforward termination and extension of blown fibre routes.
Crush and Impact Protection
The robust construction offers resistance to crushing and impact forces, helping maintain pathway integrity during installation and throughout service life.
Protected During Transport and Storage
Supplied on disposable wooden drums and capped at both ends, the tube is protected against moisture ingress and contamination prior to installation.
RoHS Compliant Construction
Manufactured in accordance with RoHS requirements, the blowing tube supports environmentally responsible network infrastructure deployments.
The Excel Enbeam 2 Way Internal 5/3.5 mm Blowing Tube LS0H White is a compact internal microduct solution designed for efficient blown fibre installation within structured building environments. Featuring a low-friction bore and halogen-free LS0H construction, it supports controlled fibre deployment with reduced drag and improved routing performance in internal network pathways.
Key Features of Excel 200E2WINBTLSW
2-way internal blowing tube configuration for dual fibre routing paths
5/3.5 mm internal microduct design for compact installations
LS0H (Low Smoke Zero Halogen) sheath for safer internal use
Low friction inner lining to improve fibre blowing performance
Crush and impact resistant construction for protected routing
White outer sheath for clear visual identification in installations
Compatible with Excel blown fibre systems and fibre units
Dual Channel Internal Microduct Design
This 2-way tube structure enables parallel fibre routing within a single compact assembly, supporting efficient space utilisation in internal cable pathways and structured network installations.
Compact 5/3.5 mm Profile
The reduced diameter design is optimised for internal environments where space constraints require high-density fibre distribution without compromising installation efficiency.
LS0H Safe Installation Sheath
Constructed with Low Smoke Zero Halogen material, the tube supports safer indoor deployment by reducing smoke emission and eliminating halogen-based compounds in the event of exposure to heat.
Low Friction Fibre Deployment
An engineered inner coating reduces resistance during fibre blowing, enabling smoother installation and supporting longer, more controlled fibre runs within internal ducting systems.
Mechanical Protection and Stability
The tube is designed to withstand crush and impact forces commonly encountered during internal installation, helping maintain duct integrity and consistent fibre pathways.
System Integration Compatibility
Fully compatible with Excel blown fibre components and fibre units, supporting integration into structured internal network infrastructures using standard termination and connection methods.
Installation Identification
The white sheath finish supports clear visual identification during routing and installation, improving organisation within multi-duct internal fibre systems.
The Excel Enbeam 7 Way External 5/3.5 mm Blowing Tube Black is a high-performance external microduct solution designed for blown fibre deployment in outdoor environments and duct installations. Featuring a durable HDPE sheath and low-friction internal lining, it supports efficient fibre installation while providing reliable protection against the demands of external network infrastructure projects.
Key Features of Excel 200E7WEXBTLSBK
7-way microduct configuration for high-density fibre distribution
Designed for external and duct-installable applications
Durable HDPE outer sheath for enhanced protection
5/3.5 mm tube construction optimised for blown fibre systems
Low friction inner coating to maximise blowing distances
Crush and impact resistant design
Colour-coded tubes for easy identification
Compatible with Excel fibre units containing 2 to 12 fibres
RoHS compliant construction
7 Way Fibre Distribution Capacity
With seven individual microduct pathways contained within a single assembly, this blowing tube provides an efficient solution for high-density fibre deployments while reducing installation complexity and conserving duct space.
Designed for External Installations
Engineered specifically for outdoor environments, the tube is suitable for external fibre distribution projects and installations within existing duct networks where long-term durability is essential.
High Density Polyethylene Protection
The robust HDPE sheath offers excellent mechanical protection, helping safeguard the internal microduct structure from environmental and installation-related stresses.
Low Friction Blown Fibre Performance
A specially formulated inner coating reduces friction during fibre installation, allowing smoother fibre movement and supporting longer blowing distances for improved deployment efficiency.
Supports Multiple Fibre Unit Types
The 5/3.5 mm microducts are designed to accommodate compatible Excel fibre units containing between 2 and 12 fibres, providing flexibility for a variety of network requirements.
Simple Identification and Management
Colour-coded internal tubes enable quick identification during installation, maintenance and future network expansion, helping improve cable management throughout the fibre infrastructure.
Easy Termination and Branching
The system is designed for straightforward termination and branch-off connections using compatible Excel connection closures and push-fit connectors, supporting efficient network deployment.
Built for Demanding Installations
Crush and impact resistant construction helps maintain duct integrity during handling, installation and ongoing operation, ensuring reliable protection for blown fibre pathways.
The Excel Enbeam 4 Way Internal 5/3.5 mm Blowing Tube LS0H White is a compact internal microduct solution designed for the efficient distribution of blown fibre within commercial and enterprise buildings. Featuring four individual pathways, a low-friction inner lining and an LS0H flame-retardant sheath, it provides reliable fibre deployment while supporting safe and organised internal network installations.
Key Features of Excel 200E4WINBTLSW
4-way microduct configuration for internal fibre distribution
5/3.5 mm tube design for blown fibre installations
LS0H (Low Smoke Zero Halogen) flame-retardant sheath
Low friction inner coating for improved blowing performance
Crush and impact resistant construction
Numbered tubes for simplified identification
Euroclass B2ca-s1,d0 rated
RoHS compliant design
Compatible with Enbeam 5 mm Pushfit Bulkhead Connectors
4 Way Fibre Distribution
Featuring four individual microduct pathways within a single compact assembly, this blowing tube enables efficient fibre routing while helping reduce installation space requirements in structured cabling environments.
Designed for Internal Applications
Purpose-built for indoor fibre distribution, the tube provides a reliable solution for routing blown fibre throughout commercial buildings, campuses and data infrastructure projects.
LS0H Flame-Retardant Construction
The polyethylene oversheath incorporates halogen-free flame-retardant materials that support safer installation within enclosed spaces where fire performance and reduced smoke emissions are important considerations.
Low Friction Blowing Performance
A specially engineered internal coating minimises drag during fibre installation, allowing smoother fibre deployment and helping maximise achievable blowing distances.
Supports Excel Fibre Units
The compact 5/3.5 mm microducts are suitable for accommodating compatible Excel fibre units containing between 2 and 12 fibres, providing flexibility across a range of network designs.
Easy Identification and Management
Each internal tube is individually numbered, enabling faster identification during installation, maintenance and future network expansion activities.
Simple Termination and Branching
The tube system is designed for straightforward termination and branch-off connections using compatible Excel connection closures and push-fit connectivity solutions.
Mechanical Strength and Compliance
Crush and impact resistant construction helps protect fibre pathways during installation and operation, while Euroclass B2ca-s1,d0 and RoHS compliance support use in regulated building environments.
Enbeam Connector Compatibility
Compatible with Enbeam 5 mm Pushfit Bulkhead Connectors, the tube integrates seamlessly into Enbeam blown fibre infrastructure, simplifying deployment and network expansion.
The Excel Enbeam 12 Way External 5/3.5 mm Blowing Tube Black is a high-capacity microduct solution designed for blown fibre deployment in external environments and underground duct networks. Featuring twelve individual pathways, a durable HDPE sheath and low-friction internal lining, it provides an efficient and scalable platform for fibre distribution while supporting long-distance fibre installation and future network expansion.
Key Features of Excel 200E12WEXBTBK
12-way microduct configuration for high-density fibre deployments
Suitable for external and duct-installable applications
Durable HDPE outer sheath for enhanced protection
5/3.5 mm microduct design optimised for blown fibre systems
Low friction inner coating helps maximise blowing distances
Colour-coded tubes for simplified identification
Compatible with Excel fibre units containing 2 to 12 fibres
Crush and impact resistant construction
RoHS compliant design
High-Density 12 Way Configuration
With twelve individual microduct pathways contained within a single assembly, this blowing tube provides substantial fibre capacity while helping reduce the number of separate ducts required for large-scale fibre infrastructure projects.
Designed for External Fibre Networks
Engineered for outdoor environments, the tube supports blown fibre deployment across campus networks, metropolitan infrastructure, industrial facilities and other external fibre installations.
Duct-Installable Construction
The compact design is suitable for installation within existing duct systems, allowing efficient fibre routing while making effective use of available underground or protected pathway space.
HDPE Protective Sheath
The robust High Density Polyethylene outer sheath provides mechanical protection and long-term durability, helping safeguard the microduct structure throughout installation and operation.
Low Friction Fibre Blowing Performance
A specially engineered inner coating reduces drag during fibre installation, enabling smoother fibre movement and helping maximise achievable blowing distances.
Supports Multiple Fibre Unit Types
Each 5/3.5 mm microduct is designed to accommodate compatible Excel fibre units containing between 2 and 12 fibres, offering flexibility for a wide range of network designs and capacity requirements.
Colour-Coded Tube Identification
Individual tubes are colour-coded to simplify identification during installation, maintenance and future network upgrades, helping improve organisation across complex fibre deployments.
Easy Termination and Expansion
The system is designed for straightforward termination and branch-off connections using compatible Excel connection closures and push-fit connectors, supporting efficient installation and future scalability.
Built for Demanding Environments
Crush and impact resistant construction helps maintain pathway integrity during handling and installation, while RoHS compliance supports deployment within environmentally conscious network projects.
The Excel Enbeam 12 Way Internal 5/3.5 mm Blowing Tube LS0H White is a high-capacity internal microduct system designed for efficient blown fibre distribution within structured building environments. Engineered with a low-friction inner lining and LS0H flame-retardant sheath, it supports safe, high-density fibre routing while maintaining performance consistency across complex internal network installations.
Key Features of Excel 200E12WINBTLSW
12-way internal microduct configuration for high-capacity fibre distribution
5/3.5 mm tube design optimised for blown fibre systems
LS0H (Low Smoke Zero Halogen) flame-retardant sheath
Low friction inner coating for improved fibre blowing performance
Crush and impact resistant construction
Numbered tubes for simplified identification and management
Euroclass B2ca-s1,d0 fire performance rating
RoHS compliant material composition
Compatible with Excel fibre units containing 2 to 12 fibres
High-Capacity Internal Fibre Distribution
The 12-way configuration provides dense internal fibre routing capability, allowing multiple fibre pathways within a single compact assembly for efficient structured cabling designs.
Designed for Internal Installations
Purpose-built for indoor environments, the tube system supports safe and efficient blown fibre deployment within commercial buildings, data centres and enterprise infrastructure.
LS0H Flame-Retardant Protection
The polyethylene oversheath incorporates halogen-free flame-retardant materials to reduce smoke emissions and enhance safety in enclosed installation environments.
Low Friction Blowing Performance
A specialised internal coating reduces friction during fibre installation, enabling smoother fibre travel and supporting longer and more efficient blowing distances.
Multi-Fibre Unit Compatibility
The 5/3.5 mm microducts are designed to accommodate compatible Excel fibre units containing between 2 and 12 fibres, providing flexibility across different network configurations.
Simplified Identification System
Each internal tube is individually numbered, making identification straightforward during installation, maintenance and future network expansion activities.
Termination and Branch Flexibility
The system is engineered for ease of termination and branch-off using compatible Excel connection closures and push-fit connectors, supporting adaptable internal network layouts.
Mechanical Strength and Compliance
Crush and impact resistant construction helps maintain duct integrity, while Euroclass B2ca-s1,d0 fire rating and RoHS compliance support use in regulated building environments.
System Integration Compatibility
The tube integrates seamlessly within Excel blown fibre systems, ensuring consistent performance across internal fibre infrastructure deployments.
The Excel Enbeam Single Internal 5/3.5 mm Blowing Tube LS0H White is a flexible internal microduct solution designed for efficient blown fibre distribution within building environments. Featuring a low-friction inner lining and LS0H flame-retardant sheath, it enables reliable fibre installation with improved blowing performance, safe indoor application, and easy system expansion through modular breakout capability.
Key Features of Excel 200E1INBTLSW
Single internal microduct for flexible fibre distribution
5/3.5 mm blown fibre tube design
LS0H (Low Smoke Zero Halogen) flame-retardant sheath
Low friction inner coating for improved fibre blowing performance
Colour-coded identification for simplified installation
Crush and impact resistant construction
RoHS compliant materials
Compatible with Enbeam push-fit blown tube connectors
Flexible Single Tube Design
The single tube configuration provides a simple and adaptable solution for internal fibre routing, allowing installers to deploy individual pathways where multi-way bundles are not required.
Designed for Internal Applications
Engineered specifically for indoor environments, the tube supports blown fibre installation across office buildings, data centres and structured cabling systems where safe and efficient fibre distribution is required.
LS0H Flame-Retardant Sheath
The polyethylene outer sheath incorporates halogen-free flame-retardant properties, helping reduce smoke emissions and improve safety in enclosed internal environments.
Low Friction Fibre Installation
A low friction internal coating reduces resistance during fibre blowing, enabling smoother installation and supporting improved blowing distances within internal duct routes.
Breakout and Expansion Capability
The tube can be easily broken out from the main sheath and branched using Enbeam push-fit blown tube connectors, supporting flexible network expansion and reconfiguration.
Colour-Coded Identification
Each tube is colour coded for easy identification, helping streamline installation, reduce errors and simplify future maintenance activities.
Mechanical Durability
Crush and impact resistant construction ensures the tube maintains structural integrity during installation and ongoing use in demanding internal environments.
System Compatibility
Fully compatible with Enbeam push-fit blown tube connectors, allowing seamless integration into existing Excel blown fibre systems and internal network infrastructure.
The Excel Enbeam 7 Way Internal 5/3.5 mm Blowing Tube LS0H White is a high-capacity internal microduct system designed for efficient blown fibre distribution within structured building environments. Featuring seven individual pathways, a low-friction inner lining and LS0H flame-retardant sheath, it delivers reliable fibre installation performance while supporting safe, scalable and organised internal network deployments.
Key Features of Excel 200E7WINBTLSW
7-way internal microduct configuration for multi-fibre distribution
5/3.5 mm blown fibre tube design
LS0H (Low Smoke Zero Halogen) flame-retardant sheath
Low friction inner coating for improved blowing performance
Numbered tubes for easy identification and management
Crush and impact resistant construction
Euroclass B2ca-s1,d0 fire performance rating
RoHS compliant materials
Compatible with Excel fibre units containing 2 to 12 fibres
7 Way High-Density Internal Routing
The seven-way configuration provides multiple internal fibre pathways within a single compact assembly, supporting high-density network designs while optimising space efficiency in structured cabling environments.
Designed for Internal Fibre Installations
Purpose-built for indoor environments, the system enables reliable blown fibre distribution across commercial buildings, data centres and enterprise infrastructure projects requiring safe internal routing solutions.
LS0H Flame-Retardant Construction
The polyethylene sheath incorporates halogen-free flame-retardant materials to reduce smoke emission and improve fire safety performance in enclosed installation areas.
Low Friction Fibre Blowing Performance
An engineered internal coating reduces friction during installation, enabling smoother fibre movement and supporting longer, more efficient blowing distances within internal duct pathways.
Multi-Fibre Unit Compatibility
The 5/3.5 mm microducts are designed to accommodate Excel fibre units containing between 2 and 12 fibres, providing flexibility across a wide range of network configurations.
Numbered Tube Identification
Each internal tube is individually numbered to simplify identification during installation, maintenance and future expansion, improving organisation within complex fibre systems.
Termination and Branch Flexibility
The system supports easy termination and branching using compatible Excel connection closures and push-fit connectors, enabling adaptable and scalable network design.
Mechanical Strength and Compliance
Crush and impact resistant construction ensures durability during installation and operation, while Euroclass B2ca-s1,d0 and RoHS compliance support use in regulated environments.
Integrated System Compatibility
The tubing integrates seamlessly within Excel Enbeam blown fibre systems, ensuring consistent performance across internal structured fibre infrastructure deployments.
The Excel Enbeam 4 Way External 5/3.5 mm Blowing Tube Green is a duct-installable microduct solution designed for external blown fibre distribution within existing duct networks. Featuring a durable HDPE sheath, low-friction inner coating and colour-coded tube structure, it provides efficient fibre installation performance while supporting reliable routing, protection and easy identification in outdoor and duct-based environments.
Key Features of Excel 200EBT4WEXGN
4-way microduct configuration for external fibre distribution
Duct-installable design for use in existing infrastructure
HDPE (High Density Polyethylene) protective outer sheath
5/3.5 mm blown fibre tube construction
Low friction inner coating for improved blowing performance
Colour-coded tubes for easy identification
Crush and impact resistant structure
RoHS compliant materials
Compatible with Excel push-fit blown tube connectors
4 Way External Fibre Routing
The four-way configuration provides multiple microduct pathways within a single assembly, enabling efficient fibre distribution across external and duct-based network installations.
Duct-Installable Design
Engineered for direct installation into existing duct systems, the tube supports efficient fibre deployment while maximising use of available underground infrastructure.
HDPE Protective Sheath
The High Density Polyethylene outer sheath provides strong mechanical protection, helping the microduct bundle withstand friction and environmental stress during installation and operation.
Low Friction Fibre Performance
A specialised internal coating reduces drag during fibre installation, improving blowing efficiency and supporting longer installation distances across duct networks.
Colour-Coded Tube Identification
Each internal tube is colour coded to simplify identification during installation, maintenance and future network expansion, reducing operational complexity.
Breakout and Branch Flexibility
The tube can be easily broken out from the main sheath and branched using Enbeam push-fit blown tube connectors, allowing flexible network configuration and scalability.
Mechanical Strength and Durability
Crush and impact resistant construction ensures reliable protection of internal microducts during installation, duct pulling and long-term operation in demanding environments.
System Compatibility
The system is fully compatible with Excel blown fibre components, supporting seamless integration into existing fibre infrastructure and duct network deployments.
The Excel Enbeam 7 Way External 5/3.5 mm Blowing Tube Green is a duct-installable microduct solution designed for external blown fibre distribution within existing duct infrastructure. Featuring a seven-way configuration, HDPE outer sheath and low-friction inner lining, it delivers efficient fibre installation performance while ensuring durability, easy identification and flexible routing across outdoor and underground network environments.
Key Features of Excel 200EBT7WEXGN
7-way microduct configuration for high-capacity external fibre distribution
Duct-installable design for use within existing infrastructure
HDPE (High Density Polyethylene) protective outer sheath
5/3.5 mm blown fibre tube construction
Low friction inner coating for improved fibre blowing performance
Colour-coded internal tubes for easy identification
Crush and impact resistant construction
RoHS compliant materials
Compatible with Enbeam push-fit blown tube connectors
7 Way High-Capacity Fibre Distribution
The seven-way configuration enables multiple fibre pathways within a single duct-installable bundle, supporting efficient high-density fibre deployment across external network environments.
Designed for Duct Installation
Engineered for direct installation into existing duct systems, the tube bundle optimises the use of available infrastructure while simplifying external fibre network expansion.
HDPE Outer Protection
The High Density Polyethylene sheath provides strong mechanical resistance, protecting internal microducts from friction, handling stress and environmental exposure during installation and operation.
Low Friction Fibre Blowing Efficiency
A low friction inner coating reduces resistance during fibre installation, enabling smoother fibre movement and supporting extended blowing distances within duct networks.
Colour-Coded Tube Identification
Each internal tube is colour coded to simplify identification during installation, maintenance and future upgrades, improving organisation within complex fibre systems.
Breakout and Branch Flexibility
The tube bundle can be easily broken out from the main sheath and branched using Enbeam push-fit blown tube connectors, allowing flexible network design and scalability.
Mechanical Durability
Crush and impact resistant construction ensures reliable protection of internal pathways during installation and long-term use in demanding external environments.
System Integration
The product integrates seamlessly with Excel Enbeam blown fibre components, supporting consistent performance and compatibility across external duct-based fibre infrastructure.
The Excel Enbeam 12 Way External 5/3.5 mm Blowing Tube Green is a high-capacity duct-installable microduct system designed for external blown fibre distribution within existing duct infrastructure. Featuring a twelve-way configuration, HDPE outer sheath and low-friction inner coating, it provides a scalable and durable solution for high-density fibre networks requiring efficient installation and long-distance fibre deployment.
Key Features of Excel 200EBT12WEXGN
12-way microduct configuration for high-capacity external fibre distribution
Duct-installable design for direct use in existing duct networks
HDPE (High Density Polyethylene) protective outer sheath
5/3.5 mm blown fibre tube construction
Low friction inner coating for improved fibre blowing performance
Colour-coded internal tubes for easy identification
Crush and impact resistant structure
RoHS compliant materials
Compatible with Enbeam push-fit blown tube connectors
12 Way High-Density Fibre Capacity
The twelve-way configuration enables multiple fibre pathways within a single duct-installable bundle, supporting large-scale external fibre deployments while optimising infrastructure space usage.
Designed for Duct-Based Installations
Engineered for direct installation into existing duct systems, the tube bundle supports efficient fibre distribution across metropolitan, campus and industrial network environments.
HDPE Protective Outer Sheath
The High Density Polyethylene sheath provides robust mechanical protection, helping the microduct bundle withstand friction and environmental stress during installation and long-term use.
Low Friction Blown Fibre Performance
An internal low friction coating reduces resistance during fibre installation, enabling smoother deployment and supporting longer blowing distances within duct infrastructure.
Colour-Coded Internal Tubes
Each internal microduct is colour coded to simplify identification during installation, maintenance and future expansion, improving organisation across complex fibre networks.
Breakout and Branch Capability
The tube bundle can be easily broken out from the main sheath and branched using Enbeam push-fit blown tube connectors, allowing flexible network configuration and scalability.
Mechanical Strength and Durability
Crush and impact resistant construction ensures reliable protection of internal microduct pathways during installation and operation in demanding external environments.
System Compatibility and Compliance
The product is fully compatible with Excel Enbeam blown fibre systems and is manufactured using RoHS compliant materials, supporting integration into regulated infrastructure projects.
The Excel Enbeam 24 Way External 5/3.5 mm Blowing Tube Green is a ultra high-capacity duct-installable microduct system designed for external blown fibre distribution within existing duct infrastructure. Featuring twenty-four individual pathways, a robust HDPE sheath and low-friction internal coating, it provides maximum fibre density, efficient installation performance and scalable infrastructure support for large-scale network deployments.
Key Features of Excel 200EBT24WEXGN
24-way microduct configuration for ultra high-capacity fibre distribution
Duct-installable design for integration into existing duct systems
HDPE (High Density Polyethylene) protective outer sheath
5/3.5 mm blown fibre tube construction
Low friction inner coating for improved fibre blowing performance
Colour-coded internal tubes for simplified identification
Crush and impact resistant construction
RoHS compliant materials
Compatible with Enbeam push-fit blown tube connectors
Ultra High-Capacity 24 Way Design
The twenty-four-way configuration delivers maximum fibre density within a single duct-installable bundle, making it ideal for large-scale external fibre infrastructure projects requiring extensive capacity in a compact footprint.
Engineered for Duct Installation
Designed for direct installation into existing duct networks, the system enables efficient utilisation of underground infrastructure while supporting high-volume fibre deployment across complex network environments.
HDPE Protective Outer Sheath
The High Density Polyethylene sheath provides strong mechanical protection, helping the microduct bundle withstand friction, installation stress and long-term environmental exposure.
Low Friction Fibre Installation Performance
A specialised internal coating reduces drag during fibre blowing, improving installation efficiency and supporting extended fibre deployment distances within duct systems.
Colour-Coded Tube Identification
Each internal tube is colour coded for fast and accurate identification during installation, maintenance and future network expansion, improving operational efficiency across complex fibre layouts.
Breakout and Branch Flexibility
The tube bundle can be easily broken out from the main sheath and branched using Enbeam push-fit blown tube connectors, allowing flexible network design and scalable fibre routing.
Mechanical Strength and Protection
Crush and impact resistant construction ensures reliable protection of internal microduct pathways during installation and long-term operation in demanding external environments.
System Compatibility and Compliance
The product integrates seamlessly with Excel Enbeam blown fibre systems and is manufactured using RoHS compliant materials, supporting use in regulated infrastructure deployments.
The Excel Enbeam 2 Way External 5/3.5 mm Blowing Tube Black is a compact duct-installable microduct system designed for external and in-duct blown fibre distribution. Featuring a dual pathway configuration, HDPE protective sheath and low-friction inner lining, it provides reliable fibre routing performance for smaller-scale installations while maintaining durability, flexibility and efficient installation across external network environments.
Key Features of Excel 200EBT2WEXBK
2-way microduct configuration for external fibre distribution
Duct-installable design for use within existing infrastructure
HDPE (High Density Polyethylene) protective outer sheath
5/3.5 mm blown fibre tube construction
Low friction inner coating for improved fibre blowing performance
Colour-coded internal tubes for easy identification
Crush and impact resistant structure
RoHS compliant materials
Compatible with Excel fibre units containing 2 to 12 fibres
2 Way Compact Fibre Distribution
The dual pathway configuration provides a streamlined solution for smaller external fibre deployments, allowing efficient use of duct space while maintaining reliable fibre routing capability.
Designed for External and Duct Installation
Engineered for direct installation into existing duct systems or external environments, the tube supports flexible deployment across a variety of fibre network applications.
HDPE Protective Outer Sheath
The High Density Polyethylene sheath provides durable mechanical protection, helping the microduct bundle withstand installation friction, handling stress and environmental exposure.
Low Friction Fibre Blowing Performance
A specialised internal coating reduces drag during fibre installation, improving blowing efficiency and supporting longer, smoother fibre runs within duct infrastructure.
Colour-Coded Tube Identification
Each internal tube is colour coded to simplify identification during installation, maintenance and future network expansion, improving operational clarity and reducing installation errors.
Breakout and Branch Flexibility
The tube bundle can be easily broken out from the main sheath and branched using Enbeam push-fit blown tube connectors, enabling adaptable and scalable network configurations.
Mechanical Strength and Durability
Crush and impact resistant construction ensures reliable protection of internal pathways during installation and long-term use in demanding external environments.
System Compatibility and Reliability
The system integrates seamlessly with Excel Enbeam blown fibre components and is backed by a 25-year system warranty, supporting long-term infrastructure performance and reliability.
The Excel Enbeam 24 Way External 5/3.5 mm Blowing Tube Black is a high-capacity duct-installable microduct system designed for external and duct-based blown fibre distribution. Featuring a twenty-four-way configuration, HDPE outer sheath and low-friction inner lining, it delivers maximum fibre density, reliable protection and efficient installation performance for large-scale network infrastructure deployments.
Key Features of Excel 200EBT24WEXBK
24-way microduct configuration for ultra high-capacity fibre distribution
Duct-installable design for external and underground duct systems
HDPE (High Density Polyethylene) protective outer sheath
5/3.5 mm blown fibre tube construction
Low friction inner coating for improved fibre blowing performance
Colour-coded internal tubes for simplified identification
Crush and impact resistant structure
RoHS compliant materials
Compatible with Excel fibre units containing 2 to 12 fibres
Ultra High-Capacity 24 Way Design
The twenty-four-way configuration provides maximum fibre density within a single duct-installable assembly, supporting large-scale external fibre network deployments while optimising infrastructure space usage.
Engineered for Duct Installation
Designed for direct installation into existing duct networks, the system enables efficient fibre distribution across metropolitan, campus and industrial environments.
HDPE Protective Outer Sheath
The High Density Polyethylene sheath provides robust mechanical protection, helping the microduct bundle withstand installation stress, friction and long-term environmental exposure.
Low Friction Fibre Blowing Performance
An engineered internal coating reduces drag during fibre installation, improving blowing efficiency and supporting longer fibre deployment distances within duct infrastructure.
Colour-Coded Internal Tubes
Each microduct is colour coded for fast identification during installation, maintenance and future expansion, improving organisation across complex fibre network layouts.
Breakout and Branch Capability
The tube bundle can be easily broken out from the main sheath and branched using Enbeam push-fit blown tube connectors, allowing flexible and scalable network configuration.
Mechanical Durability
Crush and impact resistant construction ensures reliable protection of internal pathways during installation and long-term use in demanding external environments.
System Compatibility and Long-Term Assurance
The product integrates seamlessly with Excel Enbeam blown fibre systems and is backed by a 25-year system warranty, supporting long-term network reliability and infrastructure assurance.
The Excel Enbeam 24 Way Internal 5/3.5 mm Blowing Tube LS0H White is a ultra high-capacity internal microduct system designed for dense blown fibre distribution within structured building environments. Featuring a twenty-four-way configuration, LS0H flame-retardant sheath and low-friction inner lining, it delivers maximum fibre density, safe internal installation and efficient long-distance fibre blowing performance for complex network infrastructures.
Key Features of Excel 200EBT24WINLSW
24-way internal microduct configuration for ultra high-density fibre distribution
5/3.5 mm blown fibre tube design
LS0H (Low Smoke Zero Halogen) flame-retardant sheath
Low friction inner coating for improved fibre blowing performance
Colour-coded internal tubes for simplified identification
Crush and impact resistant construction
Numbered tubes for easy installation and maintenance management
Euroclass B2ca-s1,d0 fire performance rating
RoHS compliant materials
Compatible with Excel fibre units containing 2 to 12 fibres
Ultra High-Density Internal Fibre Routing
The twenty-four-way configuration enables maximum fibre capacity within a single internal duct assembly, supporting large-scale structured cabling systems in commercial and enterprise environments.
Designed for Internal Installation
Engineered for indoor environments, the system supports safe and efficient blown fibre deployment across data centres, office buildings and complex internal infrastructure networks.
LS0H Flame-Retardant Construction
The polyethylene oversheath incorporates halogen-free flame-retardant materials, helping reduce smoke emissions and improve fire safety performance in enclosed installation areas.
Low Friction Blowing Efficiency
A specially engineered internal coating reduces resistance during fibre installation, enabling smoother deployment and supporting extended blowing distances within internal duct pathways.
Multi-Fibre Unit Compatibility
The 5/3.5 mm microducts are designed to accommodate Excel fibre units containing between 2 and 12 fibres, providing flexible configuration options for a wide range of network requirements.
Numbered Tube Identification
Each internal tube is individually numbered to simplify identification during installation, maintenance and future expansion, improving organisation in complex fibre systems.
Termination and Branch Flexibility
The system is designed for easy termination and branching using compatible Excel connection closures and push-fit connectors, supporting scalable and adaptable internal network design.
Mechanical Strength and Compliance
Crush and impact resistant construction ensures durability during installation and operation, while Euroclass B2ca-s1,d0 and RoHS compliance support use in regulated environments.
System-Level Assurance
The product integrates seamlessly within Excel Enbeam blown fibre systems and is supported by a 25-year system warranty, ensuring long-term infrastructure reliability.
The Excel Enbeam 19 Way External 5/3.5 mm Blowing Tube Black is a high-capacity duct-installable microduct system designed for external blown fibre distribution within existing duct infrastructure. Featuring a nineteen-way configuration, robust polyethylene (PE) sheath and low-friction inner lining, it provides reliable, high-density fibre routing with optimised installation performance and long-distance blowing capability for demanding network environments.
Key Features of Excel 200EBT19WEXBK
19-way microduct configuration for high-capacity fibre distribution
Duct-installable design for external and underground network use
PE (Polyethylene) protective outer sheath
5/3.5 mm blown fibre tube system
Crush and impact resistant construction
Low friction inner coating for improved fibre blowing performance
RoHS compliant materials
Compatible with Excel blown fibre tube systems and fibre units
Designed for use with fibre units featuring soft acrylate coating for reduced drag and easy splicing
High-Density 19 Way Fibre Capacity
The nineteen-way configuration enables multiple fibre pathways within a single duct-installable assembly, supporting efficient high-density fibre deployment across external network infrastructures.
Designed for Duct-Based Installation
Engineered for direct installation into existing duct systems, the tube bundle enables effective use of underground infrastructure while supporting scalable fibre network expansion.
PE Protective Outer Sheath
The polyethylene outer sheath provides strong mechanical protection, helping the microduct bundle withstand friction, installation stress and long-term environmental exposure.
Low Friction Fibre Blowing Performance
A low-friction internal coating reduces drag during installation, enabling smoother fibre movement and supporting extended blowing distances within duct environments.
Optimised Fibre Unit Compatibility
The system is designed for compatibility with Excel fibre units featuring soft acrylate cushioning, hard protective coating and low-friction outer layer for improved blowing and splicing performance.
Breakout and Branch Capability
The tube bundle can be easily broken out from the main sheath and branched using compatible Excel connection closures and push-fit connectors, enabling flexible network configuration.
Mechanical Strength and Durability
Crush and impact resistant construction ensures reliable protection of internal microduct pathways during installation and long-term operation in demanding external environments.
System Integration and Compliance
The product integrates seamlessly with Excel Enbeam blown fibre infrastructure and is manufactured using RoHS compliant materials, supporting reliable and regulated network deployments.
The Excel Enbeam 4 Way External 5/3.5 mm Blowing Tube Black is a duct-installable microduct system designed for external and in-duct blown fibre distribution. Featuring a four-way configuration, HDPE protective sheath and low-friction inner lining, it delivers reliable fibre routing performance, efficient installation and durable protection for structured network deployments in outdoor and duct-based environments.
Key Features of 200EBT4WEXBK
4-way microduct configuration for external fibre distribution
Duct-installable design for use within existing infrastructure
HDPE (High Density Polyethylene) protective outer sheath
5/3.5 mm blown fibre tube construction
Low friction inner coating for improved fibre blowing performance
Colour-coded internal tubes for easy identification
Crush and impact resistant structure
RoHS compliant materials
Compatible with Excel fibre units containing 2 to 12 fibres
4 Way Fibre Distribution Efficiency
The four-way configuration provides multiple microduct pathways within a single bundle, enabling efficient fibre deployment while optimising duct space in external and underground networks.
Engineered for Duct Installation
Designed for direct installation into existing duct systems, the tube supports flexible fibre distribution across external network infrastructures and structured cabling environments.
HDPE Protective Outer Sheath
The High Density Polyethylene sheath provides strong mechanical protection, helping the microduct bundle withstand installation stress, friction and long-term environmental exposure.
Low Friction Fibre Blowing Performance
A specialised inner coating reduces drag during fibre installation, improving blowing efficiency and supporting longer fibre runs within duct infrastructure.
Colour-Coded Tube Identification
Each internal tube is colour coded for quick and accurate identification during installation, maintenance and future expansion activities, improving operational efficiency.
Breakout and Branch Flexibility
The tube bundle can be easily broken out from the main sheath and branched using Enbeam push-fit blown tube connectors, allowing adaptable network configurations.
Mechanical Durability
Crush and impact resistant construction ensures reliable protection of internal pathways during installation and long-term use in demanding external environments.
System Compatibility and Reliability
The product integrates seamlessly with Excel Enbeam blown fibre systems and is manufactured using RoHS compliant materials, supporting consistent and reliable infrastructure performance.
