Call us FREE on 0800 488 000
X
X

Please Log In Below

Forgotten Password?
Retry
Login
loading Gif
Sorry! You can't edit your cart on this page.
Sorry! This item could not be added to your cart as it is no longer available from Comms Express.
Please check the quantity you are adding and try again.
The following item has been added to your cart.
Product Code:
Options:
Qty:
Unit Price:£
View Cart
Checkout
Your cart is empty.
Subtotal:
£0
Remove all items from cart
Are you sure? Yes No
Learn more about how
to collect Data Points
for free gifts.
Comms Express Finance Options
Request A Quote
View Cart
Checkout
Cookie Policy×

Hi there! Our website may store cookies on your computer in order to give you the best experience, such as remembering the items in your cart so you can continue shopping where you left off.

By continuing to use our site, you give consent for cookies to be used.

Browse Categories
Spend £100.00 for
FREE DELIVERY.
Free delivery excludes heavy and bulky products
Express Finder Logo
Express Cabinet Finder
Select requirements to view suitable cabinets instantly from our entire range.
Reset
8u 220mm Deep Wall Bracket
Datacel Logo

These Wall Brackets are an ideal solution where an enclosed wall cabinet isn't required.

They are supplied with top and bottom covers complete with cable entry.

Express View Logo
In Stock: Next Day
£70.82
£84.98 Inc Vat
Add To Cart
Datacel SoHo 10in Mini Data Network Cabinet
Datacel Logo

The compact design of the Mini Office Cabinet makes it the ideal housing for small network requirements, allowing integration of voice, data, ISDN and internet connections in one neat unit. The cabinet has been designed to fit perfectly into both the office and home environment and, comes in either a 6U or 8U capacity.

The lockable steel door with a Perspex front enables easy patching from the front of the unit and cable access glands are situated in the top and bottom to assist installation. They also have added ventilation slots in both sides. An extensive range of cabinet accessories are available, including; shelves, blank panels, brush strip panels and cable tidy panels.
Manufactured in the UK
Wall mounting with key holes on the rear
Cable access from rear as well as top and bottom
Door can be reversed
Side venting to allow air flow through cabinet
Finish - black fine textured
Material - mild steel
Door - Steel with Perspex front
Dimensions Part Number: 6u 8u Height: 300mm 390mm Width: 300mm 300mm Depth: 275mm 275mm

Express View Logo
Cabinet Height:
In Stock: Next Day
£86.82
£104.18 Inc Vat
Add To Cart
Datacel 19in Open Frame Wall Mount Data Cabinet
Datacel Logo

19-inch Open Frame Wall Mount Network/Data Racks are designed to be robust, economical and wall mount.

Manufactured in the UK - 1.5mm steel
Finish is fine textured black
Heavy duty frame able to take up to 90 kilo’s (with secure wall fixing)
Supplied flat pack
Easy to assemble
Dimensions     6u 9u 12u   300mm Depth Opt 450mm Depth Opt 300mm Depth Opt 450mm Depth Opt 300mm Depth Opt 450mm Depth Opt Overall Height: 287mm 287mm 420mm 420mm 555mm 555mm Overall Width: 500mm 500mm 500mm 500mm 500mm 500mm Overall Depth: 300mm 450mm 300mm 450mm 300mm 450mm Internal Working Depth: 250mm 400mm 250mm 400mm 250mm 400mm

*Please note* Image shows 9u style rack.

Express View Logo
Cabinet Height:
Cabinet Depth:
In Stock: Next Day
£56.27
£67.52 Inc Vat
Add To Cart
Datacel 9u 390mm Deep Data Cabinet Data Rack
Datacel Logo
390mm Deep Data Rack

These wall mount data/comms cabinets are ideal for small network installations. The Data Racks have 19" mounting profiles at the front and rear of the cabinet, allowing easy installation of standard rackmount equipment.

Cable access is provided top and bottom, and the front door and side panels are lockable so that unwanted hands can't tamper with the equipment inside the Data Cabinet.

Features: Lockable/removable side panels
Easy-mount wall adapter plate (for ease of installation)
19" mounting profiles front and rear
Lockable Glass Front Door
Available in Grey (RAL7044) or Black (RAL9004)
Weight (KGS) 12.2
Static Loading (KGS) 60
Accessories are available on the following pages:

PDU's
Shelves
Cable Management
Please Note: Castors are not compatible with wall mounted cabinets.

Highlights

The 9u 390mm wall mounted cabinets are available in Grey (RAL 7044) or Black (RAL 9004)

  Quick Release Side removable and lockable panels on both sides

Adjustable 19 inch front and rear mounting profiles with "u" markings

Top and bottom cable entry for easy patching Alternative Product


9u 500mm Deep Wall mounted Data Cabinet
Need 110mm more depth? Go for the 500mm version instead. 6u 390mm 6u 500mm 9u 390mm 9u 500mm External Height 370mm 503mm External Width 600mm External Depth 390mm 500mm 390mm 500mm Internal Working Depth (max) 340mm 450mm 340mm 450mm Weight 12.2Kgs 14.4Kgs 15.2Kgs 17.4Kgs Static Loading (includes weight of cabinet) 60Kg Mounting Profiles Front and Rear

Express View Logo
Colour:
In Stock: 4-6 Weeks
£125.00
£150.00 Inc Vat
Add To Cart
9u 500mm Deep Data Cabinet
Datacel Logo
Wall Mounted Data Cabinet

Our range of 500mm deep wall mounted cabinets have been redesigned and refreshed to offer users’ even better value for money, through better access, quicker and easier installation and improved aesthetic.

These wall mount data/comms cabinets are ideal for small network installations. The Data Racks have 19" mounting profiles at the front and rear of the cabinet, allowing easy installation of standard rackmount equipment.

Cable access is provided top and bottom, and the front door and side panels are lockable so that unwanted hands can't tamper with the equipment inside the Data Cabinet.

Features: Available in both Grey (RAL7044) and Black (RAL9004)
Quick release front door - Fixed and released using a simple spring loaded pin
Lockable, removeable side panels - Fixed and released using simple slam latch handles
Two sets of adjustable 19” profiles - Allows easy installation of a variety of product, shelves and power distribution
Weight (KGS) 14.4
Static Loading (KGS) 60
Accessories are available on the following pages:

PDU's
Shelves
Cable Management
Please Note: Castors are not compatible with wall mounted cabinets.



Highlights

The 9u 500mm wall mounted cabinets are available in Grey (RAL 7044) or Black (RAL 9004)

  Quick Release Side removable and lockable panels on both sides

Adjustable 19 inch front and rear mounting profiles with "u" markings

Top and bottom cable entry for easy patching

Alternative Product


9u 390mm Deep Wall mounted Data Cabinet
Too Deep? Go for the 390mm version instead.

6u 390mm 6u 500mm 9u 390mm 9u 500mm External Height 370mm 503mm External Width 600mm External Depth 390mm 500mm 390mm 500mm Internal Working Depth (max) 340mm 450mm 340mm 450mm Weight 12.2Kgs 14.4Kgs 15.2Kgs 17.4Kgs Static Loading (includes weight of cabinet) 60Kg Mounting Profiles Front and Rear

Express View Logo
Colour:
Out Of Stock
£129.00
£154.80 Inc Vat
Add To Cart
Datacel 9u 600mm Deep Server Cabinet - Server Rack
Datacel Logo
Wall Mounted

These 600mm Deep Wall Mounted Server Racks are ideal for small network installations where both Servers and Patching are require. The additional depth offers increased versatility and the 600mm width gives ample space for cable management.

Cable access is provided top and bottom, and the front door and side panels are lockable so that unwanted hands can't tamper with the equipment inside the Data Cabinet.

Features: Lockable Glass Front Door in Steel Surround
Removable and Lockable Steel Side Panels
Adjustable 19" Profiles Front & Rear
Cable access holes, with gland plates top and bottom
Earth Bonding Kit
Weight (KGS) 17
Static Loading (KGS) 60
Accessories are available on the following pages:

PDU's
Shelves
Cable Management
Please Note: Casters are not compatible with wall mounted cabinets.

Highlights



The 9u 600mm wall mounted cabinets are available in Grey (RAL 7044) or Black (RAL 9004)

  Quick Release Side removable and lockable panels on both sides

Adjustable 19 inch front and rear mounting profiles with "u" markings

Top and bottom cable entry for easy patching Alternative Product


9u 500mm Deep Wall mounted Data Cabinet
Too Deep? Go for the 500mm version instead.

Express View Logo
Colour:
In Stock: Next Day
£138.00
£165.60 Inc Vat
Add To Cart
9u 600mm Deep Wall Mount Data Cabinet Rack
Datacel Logo
2 Part Rack with Rear Swing Section

These 2 section 600mm deep wall mount data cabinets are designed with versatility in mind. When mounted on the wall, the cabinet can swing open, providing access to the rear of the cabinet for easy installation and maintenance of equipment. Lockable and removable side panels also provide easy access to the cabinet.

Cable entry is provided top and bottom of the cabinet and also in the rear swing section.

Features:

Welded construction
Lockable glass front door in a steel surround (over 180 degree door opening with quick release pins)
19" Adjustable Mounting Profiles front and rear
Cable entry points top and rear with gland plates
Lockable/removable side panels
Weight (KGS) 23
Static Loading (KGS) 60

Express View Logo
Out Of Stock
£151.00
£181.20 Inc Vat
Add To Cart
Tripp Lite Logo
Unit Dimensions (hwd / cm) 45.22 (8U), 63 (12U), 107.45 (22U) x 51.08 x 46.33

The SRWO8U22 SmartRack 8U/12U/22U Expandable Flat-Pack Low-Profile Switch-Depth Wall-Mount 2-Post Open-Frame Rack stores and organizes EIA-standard 19-inch rack equipment compatible with 2-post mounting in network wiring closets, back offices and other secure IT areas with limited floor space where a locked enclosure is not required.

Mounted to the wall or resting on the floor, this rack offers fast, easy access to network components and cabling. Constructed from heavy-duty steel with a durable black powder-coated finish, the rack has a maximum load capacity of 150 pounds. The expandable design allows you to assemble the rack in an 8U, 12U or 22U configuration to meet your current needs, while leaving rack space in reserve for future expansion.

The rack is simple to assemble and mount to the wall. Threaded 12-24 mounting holes and numbered rack spaces make equipment installation easy. The vertical mounting rails accommodate equipment up to 18 inches deep, such as network switches and patch panels. Assembly and equipment-mounting hardware is included.

Key Features Saves Valuable Workspace
Perfect for network wiring closets, back offices and other secure areas with limited floor space where a locked enclosure is not required
Stores and organizes EIA-standard 19 in. rack equipment compatible with 2-post mounting
Maximum load capacity of 150 lb.
Unit Dimensions (hwd / cm) 45.22 (8U), 63 (12U), 107.45 (22U) x 51.08 x 46.33

Expandable 2-Post Open Frame Design 
Assembles in 8U, 12U or 22U configuration to meet current needs
Expands to add equipment later without having to buy a bigger rack
Allows easy access for installing, configuring and servicing equipment and cabling

Easy Assembly and Installation
Wall-mounting holes spaced 16 in. apart for standard wall stud placement
Vertical mounting rails accommodate equipment up to 18 in. deep, such as network switches and patch panels
Rails support threaded-hole equipment mounting
Rack spaces numbered for easy reference
Includes assembly and equipment-mounting hardware

This Package Includes (24) 12-24 equipment mounting screws
(8) M6 x 12 Phillips-head screws
(16) M5 x 10 Phillips-head screws
(2) Short vertical mounting rails
(2) Long vertical mounting rails
(2) Mounting rail tie plates
(2) Top/bottom panel frames
(2) Support straps
(8) Zip ties
3 mm hex key
Owner’s manual

Express View Logo
In Stock: 2-3 Weeks
£123.24
£147.89 Inc Vat
Add To Cart
22U 2-Post Open-Frame Rack
Tripp Lite Logo
Unit Dimensions (hwd / cm) 45.22 (8U), 63 (12U), 107.45 (22U) x 51.08 x 60.96

The SRWO8U22DP SmartRack 8U/12U/22U Expandable Low-Profile UPS-Depth Wall-Mount 2-Post Open-Frame Rack is ideal for storing UPS systems, battery packs, power cords, network switches, patch panels and related cabling in secure IT areas with limited floor space. Mounted to the wall or resting on the floor, this rack offers fast, easy access to components and cabling. It's compatible with EIA-standard 19-inch rack equipment that supports two-post mounting and a maximum mounting depth of 23.5 inches.

Constructed from heavy-duty steel in a durable black powder-coated finish, the open-frame rack has a maximum load capacity of 150 pounds. The expandable design allows you to assemble the rack in an 8U, 12U or 22U configuration to meet your current needs, while leaving rack space in reserve for future expansion.

It saves precious space and allows IT managers easy access for organizing, installing and servicing equipment and cabling. The rack is easy to assemble using the included hardware. The vertical mounting rails have threaded 12-24 holes for securing equipment to the steel frame.

Key Features Saves Valuable Workspace
Perfect for installing UPS systems, battery packs, network switches and patch panels in secure IT areas with limited floor space
Houses EIA-standard 19 in. rack equipment up to 23.5 in. deep
Maximum load capacity of 150 lb.
Unit Dimensions (hwd / cm) 45.22 (8U), 63 (12U), 107.45 (22U) x 51.08 x 60.96

Open-Frame Design in 3 Configurations
Assembles in 8U, 12U or 22U to meet current needs
Expands to add equipment later without buying a bigger rack
Allows easy access for organizing, installing and servicing equipment and cabling

Easy Assembly and Installation
Made from heavy-duty steel in a durable black powder-coated finish
Easy to assemble with included hardware
Vertical mounting rails with threaded 12-24 holes
Wall-mounting holes spaced 16 in. apart to accommodate standard wall stud placement

This Package Includes (24) 12-24 equipment mounting screws
(16) M5 button-head cap screws
(8) M6 x 12 Phillips-head screws
(2) Short vertical mounting rails
(2) Long vertical mounting rails
(2) Mounting rail tie plates
(2) Metal support straps
(2) Top/bottom panel frames
(8) Zip ties
3 mm L-shaped hex key
Owner’s manual


Express View Logo
In Stock: 2-3 Weeks
£133.70
£160.44 Inc Vat
Add To Cart
22U Expandable Very Low-Profile 2-Post Open-Frame Rack
Tripp Lite Logo
Unit Dimensions (hwd / cm) 45.22 (8U), 63 (12U), 107.45 (22U) x 51.08 x 30.48

The SRWO8U22MD SmartRack 8U/12U/22U Expandable Very Low-Profile Wall-Mount 2-Post Open-Frame Rack is ideal for storing patch panels and other shallow equipment in secure IT areas with limited floor space. Mounted to the wall or resting on the floor, this rack offers fast, easy access to network components and cabling. It’s compatible with EIA-standard 19-inch rack equipment that supports two-post mounting and a maximum mounting depth of 11.5 inches.

Constructed from heavy-duty steel in a durable black powder-coated finish, the open-frame rack has a maximum load capacity of 150 pounds. The expandable design allows you to assemble the rack in an 8U, 12U or 22U configuration to meet your current needs, while leaving rack space in reserve for future expansion. It saves precious space and allows IT managers easy access for organizing, installing and servicing equipment and cabling.

The rack is easy to assemble using the included hardware. The vertical mounting rails have threaded 12-24 holes for securing equipment to the steel frame.

Key Features Saves Valuable Workspace
Perfect for installing patch panels and other shallow networking equipment in secure IT areas with limited floor space
Houses EIA-standard 19 in. rack equipment up to 11.5 in. deep
Maximum load capacity of 150 lb.
Unit Dimensions (hwd / cm) 45.22 (8U), 63 (12U), 107.45 (22U) x 51.08 x 30.48

Open-Frame Design in 3 Configurations
Assembles in 8U, 12U or 22U to meet current needs
Expands to add equipment later without buying a bigger rack
Allows easy access for organizing, installing and servicing equipment and cabling

Easy Assembly and Installation
Made from heavy-duty steel in a durable black powder-coated finish
Easy to assemble with included hardware
Vertical mounting rails with threaded 12-24 holes
Wall-mounting holes spaced 16 in. apart to accommodate standard wall stud placement

This Package Includes (24) 12-24 equipment mounting screws
(16) M5 button-head cap screws
(8) M6 x 12 Phillips-head screws
(2) Short vertical mounting rails
(2) Long vertical mounting rails
(2) Mounting rail tie plates
(2) Metal support straps
(2) Top/bottom panel frames
(8) Zip ties
3 mm L-shaped hex key
Owner’s manual

Express View Logo
In Stock: 2-3 Weeks
£103.34
£124.01 Inc Vat
Add To Cart
22U Expandable Ultra Low-Profile 2-Post
Tripp Lite Logo
Patch-Depth Wall-Mount. Unit Dimensions (hwd / cm) 45.22 (8U), 63 (12U), 107.45 (22U) x 51.08 x 45.24

The SRWO8U22SD SmartRack 8U/12U/22U Expandable Ultra Low-Profile Patch-Depth Wall-Mount 2-Post Open Frame Rack is ideal for installing patch panels and other shallow networking equipment in secure IT areas with limited floor space. Mounted to the wall or resting on the floor, this rack offers fast, easy access to network components and cabling.

It's compatible with EIA-standard 19-inch rack equipment that supports two-post mounting and a maximum mounting depth of 5.75 inches. Constructed from heavy-duty steel in a durable black powder-coated finish, the open-frame rack has a maximum load capacity of 150 pounds. The expandable design allows you to assemble the rack in an 8U, 12U or 22U configuration to meet your current needs, while leaving rack space in reserve for future expansion. It saves precious space and allows IT managers easy access for organizing, installing and servicing equipment and cabling. The rack is easy to assemble using the included hardware. The vertical mounting rails have threaded 12-24 holes for securing equipment to the steel frame.

Key Features Saves Valuable Workspace
Perfect for installing patch panels and other shallow networking equipment in secure IT areas with limited floor space
Houses EIA-standard 19 in. rack equipment up to 5.75 in. deep
Maximum load capacity of 150 lb.
Unit Dimensions (hwd / cm) 45.22 (8U), 63 (12U), 107.45 (22U) x 51.08 x 45.24

Open-Frame Design in 3 Configurations
Assembles in 8U, 12U or 22U to meet current needs
Expands to add equipment later without buying a bigger rack
Allows easy access for organizing, installing and servicing equipment and cabling

Easy Assembly and Installation
Made from heavy-duty steel in a durable black powder-coated finish
Easy to assemble with included hardware
Vertical mounting rails with threaded 12-24 holes
Wall-mounting holes spaced 16 in. apart to accommodate standard wall stud placement

This Package Includes (24) 12-24 equipment mounting screws
(16) M5 button-head cap screws
(8) M6 x 12 Phillips-head screws
(2) Short vertical mounting rails
(2) Long vertical mounting rails
(2) Mounting rail tie plates
(2) Top/bottom panel frames
(8) Zip ties
3 mm L-shaped hex key
Owner’s manual

Express View Logo
In Stock: 2-3 Weeks
£84.94
£101.93 Inc Vat
Add To Cart
Tripp Lite SRW9UDPVRT 9U SmartRack Cabinet
Tripp Lite Logo
Low-Profile Switch-Depth-Plus Wall-Mount Rack Enclosure, Wide. Unit Dimensions (hwd / cm) 50.37 x 75.24 x 55.14

SmartRack 9U Low-Profile Switch-Depth-Plus Wall-Mount Mini Rack Enclosure, Wide

9U rack cabinet with extra width for convenient cable management houses, organizes and secures standard 19 in. rack equipment

Features

9U rack constructed from powder-coated steel that stands up to tough environments 
Doors and side panels lock securely to help prevent damage, tampering or theft
Extra 3 in. width and integrated cable managers cut down on rear cord clutter
Ships fully assembled for immediate wall-mounting with user-supplied hardware
Provides physical equipment and media security required for PCI DSS compliance
5-year limited warranty 
Unit Dimensions (hwd / cm) 50.37 x 75.24 x 55.14





 



9U Wall-Mount Enclosure Houses EIA-Standard 19 in. Rack Equipment up to 20.5 in. Deep This SmartRack® rack cabinet is designed to house 9U of equipment, such as network switches and patch panels. It's recommended for branch offices, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 200 lbs (90.7 kgs).






Lockable for Simple and Secure Equipment Access The front door and side panels lock securely to help prevent damage, tampering or theft. The reversible front door can open left or right by rotating the cabinet 180 degrees before mounting. Convenient top and bottom access ports allow easy cable routing through the cabinet.






Generous Airflow Keeps Equipment Cool Round ports built into the top, bottom and both sides are designed for optional ventilation fans (such as Tripp Lite's SRFANWM, sold separately) that keep your equipment cool and functioning at their peak.






Designed with Extra Width for Easier Cable Access and Better Airflow The SRW9UDPVRT is three inches wider than Tripp Lite's standard-width wall-mount racks. Combined with two vertical cable managers in front and two cable pass-through ports on top, the extra width provides convenient cable management along the front of the rack. This allows easier cable access from the front and increases airflow by minimizing rear cable clutter that can obstruct vents. Cutouts on top of the rack can be used to secure cable bundles.






Easy Enclosure and Equipment Installation This 9U server rack comes fully assembled and ready to mount to the wall with user-supplied hardware. The side panels can be removed for convenient installation, maintenance and replacement of equipment. In addition to 9U horizontally, the cabinet can accommodate an additional 2U vertically on both the left and right sides for a total of 13U. Front and rear mounting rails adjust independently to accommodate equipment up to 20.5 inches deep, including network switches and patch panels.






Meets Payment Card Industry Standards The SRW9UDPVRT provides physical equipment and media security required for PCI DSS (Payment Card Industry Data Security Standard) compliance.




Typical Applications

Store and organize rack-mount equipment in a network wiring closet, retail location, classroom or other area where you need equipment to be secure 
Mount on a wall to save valuable floor space in a branch office or back office where floor space is limited 
Package Includes

SRW9UDPVRT SmartRack 9U Low-Profile Switch-Depth-Plus Wall-Mount Rack Enclosure Cabinet
(22) M6 screws
(22) M6 cage nuts
(22) M6 cup washers
(22) 12-24 screws
Removable mounting plate
Vertical cable management fingers
(3) Mounting plate screws
(2) Keys
Owner’s manual
Overview UPC Code 037332236494 Device Compatibility Patch Panel; Network Switch; UPS Rack Type Enclosure Physical Colour Black Maximum Device Depth 52.07 cm / 521 mm Minimum Device Depth 7.62 cm / 76 mm Rack Height 9U Shipping Dimensions (height x width x depth) 58.50 x 61.98 x 81.99 cm Shipping Weight 26.31 kg Unit Dimensions (height x width x depth) 50.37 x 75.24 x 55.14 cm Unit Weight 23.50 kg Weight Capacity - Stationary 91 kg Rack Depth Shallow Number of Vertical Mounting Rails 4 Full specification and details can be found in the

Express View Logo
In Stock: 2-3 Weeks
£372.60
£447.12 Inc Vat
Add To Cart
Tripp Lite SmartRack 9U Low-Profile Switch-Depth Wall-Mount Rack
Tripp Lite Logo
Unit Dimensions (hwd / cm) 50.5 x 60.02 x 45.16

The SRW9U SmartRack 9U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way. Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 200 pounds.

The side panels and front door lock securely to help prevent damage, tampering or theft. The front, top, bottom and removable side panels are vented, which allows air to flow freely and keep equipment cool. The reversible front door can open left or right by rotating the cabinet 180° before mounting. Convenient top and bottom ports allow easy cable routing.

The SRW9U comes fully assembled and ready to mount to the wall, or use Tripp Lite’s optional SRCASTER rolling caster kit to make it a mobile rack. Square and 12-24 threaded mounting holes and numbered rack spaces make equipment installation easy. The vertical mounting rails adjust in 7/8-inch increments to accommodate equipment up to 16.5 inches deep, such as network switches and patch panels.

Key Features Saves Valuable Workspace
Perfect for network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way
Houses EIA-standard 19 in. rack equipment in 9U of space
Maximum load capacity of 200 lb.
Unit Dimensions (hwd / cm) 50.5 x 60.02 x 45.16
Optional SRCASTER rolling caster kit available - to make this a mobile rack

Keeps Important Equipment Secure
Side panels and front door lock securely to help prevent damage, tampering or theft
Vented panels allow generous airflow that keeps equipment cool
Rotate cabinet 180° before mounting to open reversible front door left or right
Convenient ports with removable covers allow cable routing through top and bottom

Easy Enclosure and Equipment Installation
Ships fully assembled for quick installation
Mounts to wall or rolls on floor with Tripp Lite’s optional SRCASTER caster kit
Wall-mounting holes spaced 16 in. apart for standard wall stud placement
Vertical mounting rails adjust in 7/8 in. increments to accommodate equipment up to 16.5 in. deep, such as network switches and patch panels
Rails support square-hole or 12-24 threaded-hole mounting
Rack spaces numbered for easy reference

Meets Payment Card Industry Standards
Provides physical equipment and media security required for PCI DSS (Payment Card Industry Data Security Standard) compliance

This Package Includes SRW9U SmartRack 9U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet
(12) M6 screws
(12) M6 cage nuts
(12) M6 cup washers
(12) 12 to 24 screws
Removable mounting plate
(3) Mounting plate screws
(2) Keys
Owner’s manual

Express View Logo
In Stock: Next Day
£226.38
£271.66 Inc Vat
Add To Cart
Tripp Lite SRW9UDP SmartRack 9U Low-Profile Switch-Depth-Plus Wall-Mount Rack Enclosure Cabinet
Tripp Lite Logo
Unit Dimensions (hwd / cm) 50.37 x 59.99 x 55.14

The SRW9UDP SmartRack 9U Low-Profile Switch-Depth-Plus Wall-Mount Rack Enclosure Cabinet is designed to house EIA-standard 19-inch rack equipment in network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way.

Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 200 pounds. The side panels and front door lock securely to help prevent damage, tampering or theft. The front, top, bottom and removable side panels are vented, which allows air to flow freely and keep equipment cool. The reversible front door can open left or right by rotating the cabinet 180° before mounting.

Convenient top and bottom ports allow easy cable routing. The SRW9UDP comes fully assembled and ready to mount to the wall, or use Tripp Lite's optional SRCASTER rolling caster kit to make it a mobile rack. Square and threaded mounting holes and numbered rack spaces make equipment installation easy. The vertical mounting rails adjust in 7/8-inch increments to accommodate equipment up to 20.5 inches deep, such as network switches and patch panels.

Key Features Saves Valuable Workspace
Perfect for network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way
Houses EIA-standard 19 in. rack equipment in 9U of space
Maximum load capacity of 200 lb.
Unit Dimensions (hwd / cm) 50.37 x 59.99 x 55.14
Optional SRCASTER rolling caster kit available - to make this a mobile rack

Keeps Important Equipment Secure
Side panels and front door lock securely to help prevent damage, tampering or theft
Vented panels allow generous airflow that keeps equipment cool
Rotate cabinet 180° before mounting to open reversible front door left or right
Convenient ports with removable covers allow cable routing through top and bottom

Easy Enclosure and Equipment Installation
Ships fully assembled for quick installation
Mounts to wall or rolls on floor with Tripp Lite’s optional SRCASTER caster kit
Wall-mounting holes spaced 16 in. apart for standard wall stud placement
Vertical mounting rails adjust in 7/8 in. increments to accommodate equipment up to 20.5 in. deep, such as network switches and patch panels
Rails support square-hole or 12-24 threaded-hole mounting
Rack spaces numbered for easy reference

Meets Payment Card Industry Standards
Provides physical equipment and media security required for PCI DSS (Payment Card Industry Data Security Standard) compliance

This Package Includes SRW9UDP SmartRack 9U Low-Profile Switch-Depth-Plus Wall-Mount Rack Enclosure Cabinet
(18) M6 screws
(18) M6 cage nuts
(18) M6 cup washers
(18) 18-24 screws
Removable mounting plate
(3) Mounting plate screws
(2) Keys
Owner’s manual

Express View Logo
In Stock: 2-3 Weeks
£270.52
£324.62 Inc Vat
Add To Cart
 Acrylic
Tripp Lite Logo
with Clear Acrylic Window. Unit Dimensions (hwd / cm) 50.17 x 60.02 x 45

The SRW9UG SmartRack 9U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet is ideal for storing EIA-standard 19-inch rack equipment in network closets, retail locations, classrooms and other areas with limited floor space where you need equipment to be secure, organized and out of the way.

Constructed from heavy-duty steel with a durable black powder-coated finish, the cabinet has a maximum load capacity of 200 pounds. The front door features a shatter-resistant clear acrylic window that lets you monitor equipment without unlocking the enclosure.

Not only does the window help prevent equipment tampering and reduce acoustic noise, but it also adds visual flair to your IT installation. To ensure your valuable equipment stays secure, the side panels and front door lock. The top, bottom and removable side panels are vented, which allows air to flow freely through the cabinet to keep equipment cool. The reversible front door can open left or right by rotating the cabinet 180° before mounting.

Convenient top and bottom ports allow easy cable routing through the cabinet. The SRW9UG comes fully assembled and ready to mount to the wall, or use Tripp Lite's optional SRCASTER caster kit to make it a mobile rolling rack. Square and threaded mounting holes and numbered rack spaces make equipment installation easy. The vertical mounting rails adjust in 7/8-inch increments to accommodate equipment up to 16.5 inches deep, such as network switches and patch panels.

Key Features Saves Valuable Workspace
Perfect for network wiring closets, retail locations, classrooms, back offices and other areas with limited floor space where you need equipment to be secure, organized and out of the way
Houses EIA-standard 19 in. rack equipment in 9U of space
Maximum load capacity of 200 lb.
Unit Dimensions (hwd / cm) 50.17 x 60.02 x 45
Optional SRCASTER rolling caster kit available - to make this a mobile rack

Shatter-Resistant Clear Acrylic Front Window
Lets you monitor equipment without unlocking the enclosure
Prevents equipment tampering
Reduces acoustic noise
Provides extra visual flair

Keeps Important Equipment Secure
Side panels and front door lock securely to help prevent damage, tampering or theft
Vented panels allow generous airflow that keeps equipment cool
Rotate cabinet 180° before mounting to open reversible front door left or right
Convenient ports with removable covers allow cable routing through top and bottom

Easy Enclosure and Equipment Installation
Ships fully assembled for quick installation
Mounts to wall or rolls on floor with Tripp Lite’s optional SRCASTER caster kit
Wall-mounting holes spaced 16 in. apart for standard wall stud placement
Vertical mounting rails adjust in 7/8 in. increments to accommodate equipment up to 16.5 in. deep, such as network switches and patch panels
Rails support square-hole or 12-24 threaded-hole mounting
Rack spaces numbered for easy reference

Meets Payment Card Industry Standards
Provides physical equipment and media security required for PCI DSS (Payment Card Industry Data Security Standard) compliance

This Package Includes SRW9UG SmartRack 9U Low-Profile Switch-Depth Wall-Mount Rack Enclosure Cabinet
(18) M6 screws
(18) M6 cage nuts
(18) M6 cup washers
(18) 12-24 screws
Removable mounting plate
(3) Mounting plate screws
(2) Keys
Owner’s manual

Express View Logo
In Stock: 2-3 Weeks
£244.69
£293.63 Inc Vat
Add To Cart
RackyRax 550 x 450mm Wall Mount Cabinet with Glass Door
Racky Rax Logo

The compact design of the Rax 19" Wall Mounting Cabinets make them ideal for smaller networks and workgroups.

The cabinets are available in various sizes and are supplied fully assembled. Each cabinet comprises a welded steel frame and adjustable front 19" mounting profiles.

A gland plate is situated in the top and bottom of the cabinet. The cabinets feature ventilation slots top and bottom; and have a lockable glass front door, and removable sides. The cabinet frameworks are finished in a high quality attractive black.

Please note - the 450mm deep (RR-W1) Cabinets do not have rear mounting posts. Use Cantilever shelves which are secured from the front. If Rear mounting posts are required, please put as a note and these can be supplied seperately and attached on site.

6u 450mm Deep Data Cabinet shown for illustration purposes only

Features



Supplied fully assembled
Ventilated top
Adjustable mounting posts
Lockable and removable sides
Cable access top and bottom
Lockable glass front door
Technical Specification

Cabinet Specs Cable Entry Top & Bottom Colours Black Construction Welded Depth 450mm Front Door Type Glass Lockable/Removable Internal Working Depth 340mm Mounting Profiles 19" Adjustable Front & Rear Side Panels Lockable/Removable Width 550mm Height Available 6U / 340mm
9U / 470mm
12U / 600mm
15U / 735mm
18U / 875mm Manufacturer RackyRax

Express View Logo
U Height:
In Stock: 5-7 Days
£170.58
£204.70 Inc Vat
Add To Cart
RackyRax 550 x 550mm Wall Mount Cabinet with Glass Door
Racky Rax Logo

The compact design of the Rax 19" Wall Mounting Cabinets make them ideal for smaller networks and workgroups.

The cabinets are available in various sizes and are supplied fully assembled. Each cabinet comprises a welded steel frame and adjustable front and rear 19" mounting profiles.

A gland plate is situated in the top and bottom of the cabinet. The cabinets feature ventilation slots top and bottom; and have a lockable glass front door, and removable sides. The cabinet frameworks are finished in a high quality attractive black.

6u 450mm Deep Data Cabinet shown for illustration purposes only

Features



Supplied fully assembled
Ventilated top
Adjustable mounting posts
Lockable and removable sides
Cable access top and bottom
Lockable glass front door
Technical Specification

Cabinet Specs Cable Entry Top & Bottom Colours Black Construction Welded Depth 550mm Front Door Type Glass Lockable/Removable Internal Working Depth 440mm Mounting Profiles 19" Adjustable Front & Rear Side Panels Lockable/Removable Width 550mm Height Available 6U / 340mm
9U / 470mm
12U / 600mm
15U / 735mm
18U / 875mm
21U / 1015mm Manufacturer RackyRax

Express View Logo
U Height:
In Stock: 5-7 Days
£205.41
£246.49 Inc Vat
Add To Cart
RackyRax 600 x 600mm Wall Mount Cabinet with Glass Door
Racky Rax Logo

The Racky Rax range of 600mm wall mounted data cabinets have been designed with ease of installation and maintenance in mind. The high specification of the cabinet means it's suitable for almost any data comms or voice networking installation.

The data cabinets are available in sizes from 6u to 21u and can be supplied fully assembled or flat packed. Each data cabinet comprises a welded steel frame and adjustable front and rear 19” mounting profiles. A gland plate is situated in the top and bottom of the cabinet to allow for easy cable access.

The cabinets feature ventilation slots top and bottom; have a lockable glass front door and removable sides. They are ideal for mounting Patch Panels and Switches.

The cabinet frameworks are finished in a high quality attractive black colour.

6u 600mm Deep Data Cabinet shown for illustration purposes only

Features



Supplied fully assembled
Ventilated top
Adjustable mounting posts
Removable side panels
Cable entry gland plates top and bottom
Lockable and removable glass front door
Technical Specification

Cabinet Specs Cable Entry Top & Bottom Colours Black Construction Welded Depth 600mm Front Door Type Glass Lockable/Removable Internal Working Depth 490mm Mounting Profiles 19" Adjustable Front & Rear Side Panels Lockable/Removable Width 600mm Height Available 6U / 340mm
9U / 470mm
12U / 600mm
15U / 735mm
18U / 875mm
21U / 1015mm Manufacturer RackyRax

Express View Logo
U Height:
In Stock: 5-7 Days
£209.29
£251.15 Inc Vat
Add To Cart
Excel Environ 390mm Deep x 600mm Wide Wall Rack
Excel Logo

Product Overview The Environ WR is a range of wall-mounted 600mm wide racks designed for the installation of both cabling and equipment. The WR series of Wall Racks is available in depths of 390mm, 500mm and 600mm and is suitable for multiple applications including local area networking (LAN) cabling and hardware, and the housing of security, audio and visual equipment. Choice of depths available (390mm, 500mm, 600mm)
Black and Grey colours available
Aesthetically pleasing framed safety glass front door
Quick release doors and side panel
Adjustable front and rear 19'' mounting profiles
Removable cable entry panel in top and base
Rear panel is not removable
Key Features Mounting Profile: Front and rear
Model: With permanent frame
Type of profile rail: L-shaped
Number of doors: 1
Type of ventilation: Passive
Width: 600mm
Depth: 390mm
Technical Specifications Mounting Profile Front and rear Model With permanent frame Type of profile rail L-shaped Number of doors 1 Type of ventilation Passive Width 600mm Number of Rack Units /
Heights Available
6U - 368mm 9U - 501mm 12U - 635mm 15U - 769mm Depth 390mm Modular spacing 19 inch Max. load capacity 63kg With roof plate yes With earthing no With front door yes Side panels included yes Flat-packed no Material Steel Type of surface Powder coated Colours / RAL Number Grey (RAL7035) Black (RAL9004) IP-rating IP20

Express View Logo
Colour:
Cabinet Height:
In Stock: 5-7 Days
£129.58
£155.50 Inc Vat
Add To Cart
Excel Environ 500mm Deep x 600mm Wide Wall Rack
Excel Logo

Product Overview The Environ WR is a range of wall-mounted 600mm wide racks designed for the installation of both cabling and equipment. The WR series of Wall Racks is available in depths of 390mm, 500mm and 600mm and is suitable for multiple applications including local area networking (LAN) cabling and hardware, and the housing of security, audio and visual equipment. Choice of depths available (390mm, 500mm, 600mm)
Black and Grey colours available
Aesthetically pleasing framed safety glass front door
Quick release doors and side panel
Adjustable front and rear 19'' mounting profiles
Removable cable entry panel in top and base
Rear panel is not removable
Key Features Mounting Profile: Front and rear
Model: With permanent frame
Type of profile rail: L-shaped
Number of doors: 1
Type of ventilation: Passive
Width:600 mm
Depth:500 mm
Technical Specifications Mounting Profile Front and rear Model With permanent frame Type of profile rail L-shaped Number of doors 1 Type of ventilation Passive Width 600mm Number of Rack Units /
Heights Available
6U - 368mm 9U - 501mm 12U - 635mm 15U - 769mm Depth 500mm Modular spacing 19 inch Max. load capacity 63kg With roof plate yes With earthing no With front door yes Side panels included yes Flat-packed no Material Steel Type of surface Powder coated Colours / RAL Number Grey (RAL7035) Black (RAL9004) IP-rating IP20

Express View Logo
Colour:
Cabinet Height:
In Stock: 1-2 Days
£126.86
£152.23 Inc Vat
Add To Cart
Excel Environ 600mm Deep x 600mm Wide Wall Rack
Excel Logo

Product Overview The Environ WR is a range of wall-mounted 600mm wide racks designed for the installation of both cabling and equipment. The WR series of Wall Racks is available in depths of 390mm, 500mm and 600mm and is suitable for multiple applications including local area networking (LAN) cabling and hardware, and the housing of security, audio and visual equipment. Choice of depths available (390mm, 500mm, 600mm)
Black and Grey colours available
Aesthetically pleasing framed safety glass front door
Quick release doors and side panel
Adjustable front and rear 19'' mounting profiles
Removable cable entry panel in top and base
Rear panel is not removable
Key Features Mounting Profile: Front and rear
Model: With permanent frame
Type of profile rail: L-shaped
Number of doors: 1
Type of ventilation: Passive
Width: 600mm
Depth: 600mm
Technical Specifications Mounting Profile Front and rear Model With permanent frame Type of profile rail L-shaped Number of doors 1 Type of ventilation Passive Width 600mm Number of Rack Units /
Heights Available
6U - 368mm 9U - 501mm 12U - 635mm 15U - 769mm Depth 600mm Modular spacing 19 inch Max. load capacity 63kg With roof plate yes With earthing no With front door yes Side panels included yes Flat-packed no Material Steel Type of surface Powder coated Colours / RAL Number Grey (RAL7035) Black (RAL9004) IP-rating IP20

Express View Logo
Cabinet Height:
Flat Pack:
Colour:
In Stock: 1-2 Days
£164.66
£197.59 Inc Vat
Add To Cart
Lande Logo

Lande PROline 9U Wall Mount Cabinets

PROline networking enclosures/cabinets combine high quality design with superior performance. Tested with 300 kgs on the wall, 3 times the nominal weight load of 100kgs.

The design allows the cabinet to carry heavy telecom equipment, UPS and batteries in addition to standard network & IT equipment such as switches, patch panels and cables.

This product gives maximum performance on cabling and networking infrastructure, providing an economic solution using high quality fully automated production.


Key Features: • Available in heights of 7U, 9U,12U, 16U & 20U

450mm and 600mm depth options

• High quality design with a rigid structure

• As standard with lockable glass front door and side panels

• Top cover with ventilation slots for option of fan installation

• Top and base have cable entry with rubber edged sliding plate (145 x 70mm)

• Rear panel has a cable gland plate

• Rear panel is used for mounting to the wall

• 19" mounting rails have U height numbering sequence

• 450mm deep supplied with 2x 19" mounting rails

• Standard paint finish of Black RAL9005 or Light Grey RAL7035

• Can also be used as a free standing cabinet with option to add castors (823415) or adj feet (823414)


Construction Main profile, framework, top/bottom cases: Multi folded automated bending technology corner profile system, resulting in a heavy duty structure with high load capacity.

The top cover and base panel have cable entry points with rubber edged sliding mechanism (w:145 x d:70 mm), allowing cabling insertion.


Rail Features The 19” rails of Lande PROline Series Wall Cabinet have automated silk-screen U numbering, from top to bottom and bottom to top. This helps when installing equipment. 19" rails are 4 fold bending for strength, 1.5 mm thickness provides high load capacities. The 19" rails are made of steel with 8-12 micron zinc plating for corrosion resistance. The 19" rails are adjustable in depth.


Additional Features PROline Wall Cabinets have a rear panel which is multifolded with 5 folds providing rigidity and high load capacity. The panel can be used as wall fixing pattern on wall. This feature provides cost efficiency on site allowing one engineer to fit a heavy enclosure to the wall.


Construction Drawings:  
Additional information can be found in the Catalogue PDF file

Measurement information can be found in the

Express View Logo
Colour:
In Stock: 4-6 Weeks
£138.57
£166.28 Inc Vat
Add To Cart
Lande Logo

Lande PROline 9U Wall Mount Cabinets

PROline networking enclosures/cabinets combine high quality design with superior performance. Tested with 300 kgs on the wall, 3 times the nominal weight load of 100kgs.

The design allows the cabinet to carry heavy telecom equipment, UPS and batteries in addition to standard network & IT equipment such as switches, patch panels and cables.

This product gives maximum performance on cabling and networking infrastructure, providing an economic solution using high quality fully automated production.


Key Features: • Available in heights of 7U, 9U, 12U, 16U & 20U and width of 600mm

• 450mm and 600mm depth options

• High quality design with a rigid structure

• As standard with lockable glass front door and side panels

• Top cover with ventilation slots for option of fan installation

• Top and base have cable entry with rubber edged sliding plate (145 x 70mm)

• Rear panel has a cable gland plate

• Rear panel is used for mounting to the wall

• 19" mounting rails have U height numbering sequence

• 600mm deep supplied with 4x 19" mounting rails

• Standard paint finish of Black RAL9005 or Light Grey RAL7035

• Can also be used as a free standing cabinet with option to add castors (823415) or adj feet (823414)


Construction Main profile, framework, top/bottom cases: Multi folded automated bending technology corner profile system, resulting in a heavy duty structure with high load capacity.

The top cover and base panel have cable entry points with rubber edged sliding mechanism (w:145 x d:70 mm), allowing cabling insertion.


Rail Features The 19” rails of Lande PROline Series Wall Cabinet have automated silk-screen U numbering, from top to bottom and bottom to top. This helps when installing equipment. 19" rails are 4 fold bending for strength, 1.5 mm thickness provides high load capacities. The 19" rails are made of steel with 8-12 micron zinc plating for corrosion resistance. The 19" rails are adjustable in depth.


Additional Features PROline Wall Cabinets have a rear panel which is multifolded with 5 folds providing rigidity and high load capacity. The panel can be used as wall fixing pattern on wall. This feature provides cost efficiency on site allowing one engineer to fit a heavy enclosure to the wall.


Construction Drawings:  
Additional information can be found in the Catalogue PDF file

Measurement information can be found in the

Express View Logo
Colour:
In Stock: Next Day
£152.86
£183.43 Inc Vat
Add To Cart
Lande Logo

PROline 9U Rear Wall Mounting Section

All Lande PROline Wall Cabinets have the option for a rear section unit. The rear section is a heavy duty welded framed construction, 2.0 mm thick.

A PVC cable entry gland plate is provided at the wall side, to allow a cable to run through. The 19" provision, located in the rear section module, allows additional space inside (100 mm). Triangular positioning brackets for alignment and heavy load capability.


Key Features: • Available in 7U, 9U, 12U, 16U & 20U heights

• All are 150mm deep and 600mm wide

• Heavy duty welded frame construction, 2.0mm thickness

• PVC Cable entry plate in top, base and rear

• Hasp type lock to the main cabinet

• When used with 450mm deep cabinet, the load capacity is 50kg

• When used with 600mm deep cabinet, the load capacity is 35kg


Construction Drawings:  
Additional information can be found in the Catalogue PDF file

Express View Logo
Colour:
In Stock: Next Day
£133.52
£160.22 Inc Vat
Add To Cart
Lande Logo

Lande 9U IP55 Safebox-B

This Lande range of IP55 Wall Mounting Cabinets are designed for use within industrial applications, warehouses and outdoor areas to provide protection against dust and water ingress, (rain, slush, snow). With the addition of a fan & filter integration, this area of the enclosure provides IP54 protection.

The SAFEBOX-B IP55 Outdoor Cabinets are designed for industrial applications. Based on EN 60529 provided IP55 protection class against dust and water ingress. With fan and filter integration, enclosure provides IP54 protection against dust and water. Enclosure provides protection against extraneous objects (things that might fall in, dust carried by wind) and water (rain, slush, snow, blush) which might damage the internal equipment.


Key Features: • Monoblock welded construction, with polyester type powder coating (RAL7035 Light Grey)

• Size - 9U, width 600mm and depth 450mm or 600mm

• 9U models contain single point turn locking system. The lock systems accommodate a central cylinder lock which unlocks with a cylindrical key

• All models fitted with 1 set of 19" mounting rails

• As standard, the base of the cabinet is equipped with a filtered air inlet

• The base of the cabinet is equipped with 4x PG21 cable entry compatible blind plugs

• Top part is also filtered for passive ventilation and hot air exhaust. As required these filters can be replaced with a thermostat switched single fan

• All models have a roof canopy with gasket for dust and liquid protection

• Wall mounted brackets are included. Note that mounting screws are not, as this is subject to the site mounting area

• A single earth grounding cable between the main body and door is included

• Metal front door with IP55 sealing gasket

• Maximum load capacity is upto 300kg mounted on the wall, or 800kg on the ground

• Accessories include, rear mounting plates, fans plus options for pole mounting and plinths if siting on the ground


Installation:  
Installation information can be found in the Installation Guide PDF file

Express View Logo
Dimensions:
In Stock: Next Day
£440.34
£528.41 Inc Vat
Add To Cart
Other Ranges Available
800mm Wide x 1200mm Deep Server Cabinets/Racks
800mm Wide x 1200mm Deep Server Cabinets/Racks
View Range
600mm Wide x 1200mm Deep Server Cabinets/Racks
600mm Wide x 1200mm Deep Server Cabinets/Racks
View Range
800mm Wide x 1000mm Deep Server Cabinets/Racks
800mm Wide x 1000mm Deep Server Cabinets/Racks
View Range
600mm Wide x 1000mm Deep Server Cabinets/Racks
600mm Wide x 1000mm Deep Server Cabinets/Racks
View Range
47U/48U Data & Server Racks/Cabinets
47U/48U Data & Server Racks/Cabinets
View Range
Join Our Mailing List
Social Links
  • Apply for Credit