Tile and Panel Lifters

The DCPL001 suction panel lifter has a strong Aluminium body and 2 toggle action suction cups. This is a quality made lifter incorporating the best quality materials. It is strong, robust and is a perfect choice for consistently reliable panel suction. The panel can only be released when the toggle release is activated.

Aluminium Body
High quality suction cups
Safe twin toggle activate/release action
German made
Maximum lifting capacity - 60kg

The DCPL002Y quick action panel lifter is designed to help remove a large number of panels quickly. 2 x 100mm push suction cups grip the panel allowing it to be lifted from the floor plate. The suction trigger quickly releases the floor panel. This suction tool is not designed for carrying panels over any distance but rather to allow quick movement from one panel to the next. The bright yellow handle is highly visible and should help you find it when you need it. We also supply a wall bracket to house the lifter so it never is lost, see DCPH001.

Quick Action Suction Activation - Just press down
Quick release - Squeeze finger trigger
Body made from high strength resin
2no. 100mm suction cups
Ideal for releasing & reinstalling (not carrying) floor panels

Suitable for releasing a lot of floor panels from the floor grid quickly. Not suitable for carrying floor panels.

Aluminium Body
Quality Suction Cups
Press down to activate suction
Squeeze finger trigger to release suction
Made in USA

The DCPL003 aluminum quick action panel lifter is designed to help remove a large number of panels quickly. 3 x 100mm push suction cups vacuum grip the panel allowing it to be lifted from the floor plate. The suction trigger quickly releases the floor panel. This suction tool is not designed for carrying panels over long distances but will allow further distance than the 2 suction cup model DCPL002. We also supply a wall bracket to house the lifter, see product reference DCPH001.

Ultra safe
3 quality suction cups
Toggle activated
Aluminium Body
Made in Germany
Maximum lifting capacity - 100kg

Ideal for legacy datacenters or computer rooms who have floor tiles covered with carpet.

Strong aluminium construction
Sharp spike tooth grip
Lift to release feature

Never misplace your suction lifter again! The wall mounted bracket comes complete with fixing screws and a reminder note to replace the suction lifter when finished. Give your suction tool a home and install a wall bracket.

The perfect home for your suction cup lifting tool
Easy to install
Easy to locate lifter
Put your Logo, Contact Details or Sales Message on the wall bracket
Stock Colours - Light Grey, Orange

Our vertical “Stand – Up” floor tile lifter allows quick, safe lifting of floor panels/tiles from your raised floor all while maintaining a standing position! You no longer have to kneel down and lift access floor tiles from an awkward position. Save the wear and tear on your knees!

For some people, bending over or kneeling down to lift floor tiles causes back or arm strain. So with the assistance of an Ergonomist, the StandUp Floor Tile Lifter was designed. The StandUp Floor Tile Lifter is finely designed to be lightweight, simple to use and portable, while still being rugged. You will find that this long handled access floor tile lifter makes repeated lifting of raised floor tile panels fast, easy, and safe.


Model DCPL005 is recommended for individuals who are between 59" and 62" in height (175 cm – 188 cm). It measures 33" in total height (84 cm).

This Double 5" suction pad model is recommended for most floor tiles because of the increased stability and hold offered by the larger suction cups.

Recommended Accessories

Metal Red Stripe Wall Bracket Acrylic Orange Wall Bracket

This model is made of strong metal, with press formed rounded corners that will fit evenly against any wall. It mounts with its longest side horizontally, and attaches easily to your wall with 4 drywall screws that are included.

The white powder coated metal bracket nicely holds Double Cup Floor Tile Pullers horizontally. It is painted in highly visible and recognizable red and white stripes, which looks smart next to a hanging fire extinguisher.

13-7/8" in width x 8-1/8" in height

This is an economical model that is made of lightweight and strong acrylic thermoplastic. It mounts with its longest side vertically, and attaches easily to your wall with 4 drywall screws and spacers that are included.

The metal hook fits simply into the pre-drilled holes, and it safely holds any All-Vac Lifting tool that we offer. It is made in brightly colored orange to ensure that anyone can easily see it in case of emergency.

14in height x 9in width