StarTech PCI & Express Cards

2 Port ExpressCard Laptop USB 2.0 Adapter Card

Add two USB 2.0 ports to a computer through an ExpressCard slot






 



This USB ExpressCard lets you add two USB 2.0 ports to your laptop computer, with support for high-speed USB transfer rates of up to 480Mbps. Compliant with the ExpressCard Type II standard, the USB ExpressCard can be installed in any 34mm or 54mm ExpressCard slot, and offers broad operating system compatibility supporting Windows® 2000/XP/XP 64-bit/Server 2003/Vista™.





Applications: MP3 players
Portable hard drives
DVD drives
Printers
Digital cameras
Mice and keyboards
Flash card readers/writers
Scanners
PDAs
External CDR/RWs
Joysticks
Webcams









Features: Supports all available USB transfer rates:High-speed (480Mbps), Full-speed (12Mbps), and Low-speed (1.5Mbps)
Compliant with Express Card (34mm) Type II Standard
Backward compatible with USB version 1.1
Optional power adapter accommodates high current consumption devices
Easy Plug & Play installation









The StarTech.com Advantage: Easily add two USB 2.0 ports to your laptop computer
Hot swap capabilities allow you to connect and disconnect devices without turning off your computer
PC and Mac compatible









Network Data transfer rate 480 Mbit/s Compatible operating systems Windows 200/XP/XP 64-bit/Server 2003/Vista
Ports & interfaces USB 2.0 ports quantity 2 Host interface ExpressCard
Packaging data Package width 72 mm Package depth 172 mm Package height 180 mm Package weight 90 g Full specification and details can be found in the

1 Port Flush Mount ExpressCard SuperSpeed USB 3.0 Card Adapter with UASP Support

Add a USB 3.0 port connection that inserts flush into a laptop ExpressCard slot






 



The ECUSB3S11 Flush Mount 1-Port USB 3.0 ExpressCard lets you add a single USB 3.0 port connection to your laptop through an ExpressCard slot.


The USB 3.0 adapter uses a unique form factor design that allows it to sit fully in a standard 34mm ExpressCard slot without sticking out. The port sits virtually flush with the sides of the laptop, enabling you to leave the card installed even while on the move, without fear of damage to the card or slot.


Enhanced with UASP support (USB Attached SCSI Protocol), this USB 3.0 controller performs up to 70% faster than conventional USB 3.0 when paired with a UASP supported enclosure (Note: UASP requires a compatible operating system). Using a more efficient protocol than the traditional USB BOT (Bulk-Only Transport), UASP technology optimizes transfers by allowing multiple commands to be processed simultaneously, significantly increasing transfer speeds for less wait time on data transfers. See our UASP test results below for further details.


The USB 3.0 ExpressCard adapter supports data transfer rates up to 5Gbps, and is still backward compatible with USB 2.0 at up to 480Mbps, or USB 1.1/1.0 at up to 12/1.5 Mbps respectively.


Backed by a StarTech.com 2-year warranty and free lifetime technical support.





Improved Performance with UASP UASP is supported in Windows® 8, Server 2012 and Linux kernel 2.6.3 or later. In testing UASP performed with up to a 70% faster read / 40% faster write speed over traditional USB 3.0 at peak performance.



At the same peak in testing, UASP also showed up to an 80% reduction in required processor resources.



Test results were obtained using an Intel® Ivy Bridge system, StarTech.com add-on USB 3.0 cards, a UASP-enabled StarTech.com enclosure, and a SATA III solid state drive.  






Product Diagram:

 






Applications: Add a SuperSpeed USB 3.0 port through an ExpressCard slot, without having to worry about damaging the card or slot while on the move
Connect high performance USB 3.0 external storage devices, printers or external video adapters to a laptop
Upgrade an older laptop to USB 3.0 capability
Add an extra USB 3.0 port to a laptop with limited USB 3.0 ports available









Features: Unique flush-mount form factor design
SuperSpeed USB 3.0 compliant host interface with support for transfer rates up to 5 Gbps
UASP support for more efficient data transfer
Provides up to 850mA of power over USB
Works with most Windows based operating systems
Backward compatible with USB 2.0/1.x devices
Compliant with USB 3.0 base specification 1.0 and xHCI specification 0.95
Includes 34mm to 54mm ExpressCard stabilizer bracket









The StarTech.com Advantage: Eliminate the worry of snagging or hitting the ExpressCard with a unique Flush Mount design
Increase productivity with SuperSpeed USB 3.0 connectivity, while remaining backward compatible with USB 2.0/1.x devices
Time-saving file transfers, up to 70% faster than traditional USB 3.0 when used with a UASP-supported enclosure









Ports & interfaces Internal No USB 3.2 Gen (3.1 Gen 1) Type-A ports quantity 1 Output interface USB 3.2 Gen 1 (3.1 Gen 1) Host interface ExpressCard
Technical details Chipset Renesas/NEC µPD720202 Data transfer rate (max) 5 Gbit/s Sustainability certificates RoHS
Performance UASP support Yes Chipset Renesas/NEC µPD720202 Data transfer rate (max) 5 Gbit/s Product colour Black, Silver
Design Internal No Product colour Black, Silver Certification CE, FCC, TAA, REACH
Operating conditions Operating temperature (T-T) 0 - 50 °C Storage temperature (T-T) -10 - 85 °C Operating relative humidity (H-H) 5 - 95 %
Weight & dimensions Width 34 mm Depth 75 mm Height 5 mm Weight 24 g
Packaging data Package width 162 mm Package depth 131 mm Package height 32 mm Package weight 108 g Mounting brackets included Yes Manual Yes Drivers included Yes Cables included USB Full specification and details can be found in the

2 Port ExpressCard SuperSpeed USB 3.0 Card Adapter with UASP Support

Add 2 USB 3.0 Ports to a Laptop through an ExpressCard Slot






 



The ECUSB3S22 2-Port ExpressCard USB 3.0 Card adds 2 SuperSpeed USB 3.0 ports to an ExpressCard-enabled computer system, using a 34mm form factor that will fit in both 34mm and 54mm slots, along with ports mounted side-by-side for easy access.


Enhanced with UASP support (USB Attached SCSI Protocol), this USB 3.0 controller performs up to 70% faster than conventional USB 3.0 when paired with a UASP supported enclosure (Note: UASP requires a compatible operating system). Using a more efficient protocol than the traditional USB BOT (Bulk-Only Transport), UASP technology optimizes transfers by allowing multiple commands to be processed simultaneously, significantly increasing transfer speeds for less wait time on data transfers. See our UASP test results below for further details.


USB 3.0 supports data transfer rates up to 5 Gbps (10x faster than USB 2.0) and is able to provide more power per port, to help support faster and more powerful devices. Also, this ExpressCard adapter is backward compatible with USB 2.0/1.x, so all of your existing devices will still work.


Backed by a StarTech.com 2-year warranty and free lifetime technical support.





Improved Performance with UASP UASP is supported in Windows® 8 and Server 2012. In testing UASP performed with up to a 70% faster read / 40% faster write speed over traditional USB 3.0 at peak performance.



At the same peak in testing, UASP also showed up to an 80% reduction in required processor resources.



Test results were obtained using an Intel® Ivy Bridge system, StarTech.com add-on USB 3.0 cards, a UASP-enabled StarTech.com enclosure, and a SATA III solid state drive.  








Applications: Laptop users looking to extend the life of their older mobile computers by adding USB 3.0 connectivity
Expand on your laptop expansion capabilities with additional USB ports
Professionals or home users looking to expand a laptops storage capabilities with high performance USB 3.0 external storage devices for large videos/images/etc.
IT professionals looking to backup or archive large amounts of data off of a laptop quickly









Features: Two SuperSpeed USB 3.0 compliant ports, with support for transfer rates up to 5 Gbps
Side-by-side port mount design
UASP support for more efficient data transfer
Backward compatible with USB 2.0/1.x devices
Built-in external DC power connector (optional)
Compliant with USB 3.0 base specification 1.0 and xHCI specification 0.96
Compliant with PCI Express specification 2.0









The StarTech.com Advantage: SuperSpeed USB 3.0 connectivity at up to 5 Gbps, while still backwards compatible with USB 2.0/1.x
Easily accessible side-by-side port design for easy access even for cables/devices with wide plug housings
Time-saving file transfers, up to 70% faster than traditional USB 3.0 when used with a UASP-supported enclosure









Ports & interfaces Internal Yes USB 3.2 Gen (3.1 Gen 1) Type-A ports quantity 2 Output interface USB 3.2 Gen 1 (3.1 Gen 1) Host interface ExpressCard
Performance Chipset NEC uPD720200 Product colour Black
Design Internal Yes Product colour Black
Operating conditions Operating temperature (T-T) 0 - 50 °C Storage temperature (T-T) -20 - 150 °C Operating relative humidity (H-H) 0 - 60 %
Weight & dimensions Width 40 mm Depth 115 mm Height 12 mm Weight 33 g
Packaging data Package width 173 mm Package depth 144 mm Package height 32 mm Package weight 119 g Full specification and details can be found in the

2 Port Flush Mount ExpressCard 54mm SuperSpeed USB 3.0 Card Adapter with UASP Support

Add two flushmount USB 3.0 ports to your ExpressCard-enabled laptop






 



The ECUSB3S254F 2-Port Flush Mount USB 3.0 ExpressCard Adapter lets you add two USB 3.0 ports to your ExpressCard-enabled laptop.


The USB 3.0 card uses a unique design that allows it to sit flush in a standard 54mm laptop ExpressCard slot, creating a seamless add-on that can be left installed even while on the move, without having to worry about impact damage to either the card or the ExpressCard slot.


Enhanced with UASP support (USB Attached SCSI Protocol), this USB 3.0 controller performs up to 70% faster than conventional USB 3.0 when paired with a UASP supported enclosure (Note: UASP requires a compatible operating system). Using a more efficient protocol than the traditional USB BOT (Bulk-Only Transport), UASP technology optimizes transfers by allowing multiple commands to be processed simultaneously, significantly increasing transfer speeds for less wait time on data transfers. See our UASP test results below for further details.


The SuperSpeed USB 3.0 Card supports data transfer rates of up to 5Gbps, and is backward compatible with USB 2.0 (at up to 480Mbps), or USB 1.1/1.0 at up to 1.5/1.2 Mbps respectively - the perfect laptop accessory for users to connect USB devices, both new and old.


Backed by a StarTech.com 2-year warranty and free lifetime technical support.





Improved Performance with UASP UASP is supported in Windows® 8 and Server 2012. In testing UASP performed with up to a 70% faster read / 40% faster write speed over traditional USB 3.0 at peak performance.



At the same peak in testing, UASP also showed up to an 80% reduction in required processor resources.



Test results were obtained using an Intel® Ivy Bridge system, StarTech.com add-on USB 3.0 cards, a UASP-enabled StarTech.com enclosure, and a SATA III solid state drive.  








Applications: Users who need USB connectivity, but do not need to swap between other ExpressCard adapters, so will leave the card installed in the card slot
Mobile users who want to leave ExpressCard adapters installed, without worry about damaging the card or slot while on the move
Connect high performance USB 3.0 external storage devices to a laptop
Upgrade an older laptop with USB 3.0 connectivity
Expand on your laptop expansion capabilities with additional USB ports










Features: Unique flush-mount form factor design
Two SuperSpeed USB 3.0 compliant ports with support for transfer rates up to 5 Gbps
UASP support for more efficient data transfer
Backward compatible with USB 2.0/1.x devices
Compliant with USB 3.0 base specification 1.0 and xHCI specification 0.95
Compliant with PCI Express specification 2.0
Built-in external DC power connector (optional)









The StarTech.com Advantage: Eliminate the worry of snagging or hitting the ExpressCard with a unique Flush Mount design
SuperSpeed USB 3.0 connectivity at up to 5 Gbps, while still backwards compatible with USB 2.0/1.x
Time-saving file transfers, up to 70% faster than traditional USB 3.0 when used with a UASP-supported enclosure









Ports & interfaces Internal Yes USB 3.2 Gen (3.1 Gen 1) Type-A ports quantity 2 Output interface USB 3.2 Gen 1 (3.1 Gen 1) Host interface ExpressCard
Performance Chipset NEC uPD720200 Product colour Black
Design Internal Yes Product colour Black
Operating conditions Operating temperature (T-T) 0 - 85 °C Storage temperature (T-T) -65 - 125 °C
Weight & dimensions Width 54 mm Depth 74 mm Height 5 mm Weight 23.8 g
Packaging data Package width 175 mm Package depth 145 mm Package height 31 mm Package weight 105 g Full specification and details can be found in the

2 Port PCI SuperSpeed USB 3.0 Adapter Card with SATA Power

Add 2 SuperSpeed USB 3.0 ports to a computer through a PCI slot






 



The PCIUSB3S22 2-Port PCI to USB 3.0 Card enables you to connect USB 3.0 peripherals to a PC through a legacy PCI host bus, which doubles the data transfer speeds when used with USB 3.0 peripherals than would be possible with a USB 2.0 host connection - up to 1.3 Gbps (PCI bus limit).


The card features an optional SATA power connection, which enables each port to supply up to 900mA of power to USB 3.0 bus-powered devices.


By supporting a legacy (PCI) host connection, the card adds updated peripheral connectivity, without having to upgrade to a PCIe-equipped motherboard or rely on the backward compatibility of USB 3.0 peripherals.


Guaranteed to provide reliable performance, the PCIUSB3S22 PCI USB 3.0 card is backed by lifetime warranty and free lifetime technical support.



Product Diagram:

 






Applications: Connect USB 3.0 peripherals to a legacy PC through a PCI slot
Expand system capabilities with additional external USB ports









Features: 2 external Super Speed USB 3.0 ports
Provides up to 900mA of power over USB 3.0
Backward compatible with USB 2.0/1.x devices
Compliant with USB 3.0 base specification 1.0 and xHCI specification 0.95
Compliant with PCI Specification 3.0
Includes a Low Profile/Half-Height installation bracket









The StarTech.com Advantage: Faster transfer rates when used with USB 3.0 peripherals than a USB 2.0 host connection would permit (up to 1.3 Gbps, PCI bus limit)
Suited for installation in Small Form Factor cases as well as in full profile systems
Can support bus-powered USB devices









Ports & interfaces Internal Yes USB 3.2 Gen (3.1 Gen 1) Type-A ports quantity 2 Output interface USB 3.2 Gen 1 (3.1 Gen 1) Internal SATA ports quantity 1 Host interface PCI
Technical details Chipset NEC uPD720200 Sustainability certificates RoHS
Design Internal Yes Product colour Red
Operating conditions Operating temperature (T-T) -50 - 50 °C Storage temperature (T-T) -25 - 70 °C Operating relative humidity (H-H) 15 - 90 %
Weight & dimensions Width 123 mm Depth 56 mm Height 10 mm Weight 60 g
Packaging data Package width 144 mm Package depth 175 mm Package height 32 mm Package weight 146 g Full specification and details can be found in the

4 Port PCI SuperSpeed USB 3.0 Adapter Card with SATA / SP4 Power

Add 4 SuperSpeed USB 3.0 ports to a computer through a PCI slot






 



The PCIUSB3S4 4-Port PCI to USB 3.0 Card enables legacy PCI slots to support the SuperSpeed USB 3.0 standard, which is capable of data transfer rates up to 5 Gbps. Using USB 3.0 devices with this card will increase data transfer rates with up to 1.3 Gbps of available bandwidth (PCI bus limit) - more than doubling performance compared to a USB 2.0 connection.


This versatile USB 3.0 adapter includes an optional SATA power connector which allows each USB port to deliver up to 900mA of power to connected USB 3.0 devices - suitable for even the most power hungry devices.


A perfect solution for older PCI-based systems or computers with only PCI expansion slots remaining, the card allows those systems to stay relevant and up-to-date with the latest USB technology. The card is also backward compatible with USB 2.0 and 1.x devices, so it will not only work with any future USB 3.0 devices, but will also support older devices.


The PCIUSB3S4 4-Port PCI USB 3.0 Card is backed by StarTech.com lifetime warranty and free lifetime technical support.



Product Diagram:

 






Applications: Add USB 3.0 capabilities to an older PCI-based system
Expand system capabilities by adding external USB ports
Enable Super Speed USB 3.0 data communication for external storage devices and audio/video devices









Features: 4 external SuperSpeed USB 3.0 ports
Provides up to 900mA of power over USB 3.0
Built-in optional SATA power connector for bus-powered USB devices
Backward compatible with USB 2.0/1.x devices
Compliant with USB 3.0 base specification 1.0 and xHCI specification 0.95
Compliant with PCI Specification 3.0
Includes a low profile/half-height installation bracket









The StarTech.com Advantage: Increased data transfer rates (up to 1.3 Gbps PCI bus limit) with USB 3.0 compatible devices
Suitable for installation in standard-sized and Small Form Factor computers
Supports bus-powered USB 3.0 devices









Ports & interfaces Internal Yes USB 3.2 Gen (3.1 Gen 1) Type-A ports quantity 4 Output interface USB 3.2 Gen 1 (3.1 Gen 1) Internal SATA ports quantity 1 Host interface PCI
Technical details Chipset Renesas/NEC - µPD720202 Data transfer rate (max) 5 Gbit/s Sustainability certificates RoHS
Performance UASP support Yes Chipset Renesas/NEC - µPD720202 Data transfer rate (max) 5 Gbit/s Product colour Red
Design Internal Yes Product colour Red Certification CE, FCC, TAA, REACH
Operational conditions Operating temperature (T-T) 5 - 50 °C Storage temperature (T-T) -25 - 70 °C Operating relative humidity (H-H) 15 - 90 %
Weight & dimensions Width 20 mm Depth 133 mm Height 65 mm Weight 72 g
Packaging data Package width 175 mm Package depth 145 mm Package height 33 mm Package weight 165 g Mounting brackets included Yes Manual Yes Drivers included Yes Full specification and details can be found in the

7 Port PCI USB Card Adapter

Add 7 USB 2.0 Ports to your PC through a PCI slot






 



This PCI USB card adds seven USB 2.0 ports (1 internal USB A Female, 2 internal USB motherboard header, and 4 external USB A Female) to your PCI-capable PC.


The PCI USB 2.0 card is a versatile solution that lets you add USB 2.0 connections without having to upgrade the system motherboard.


An all-in-one solution, the PCI USB card supports USB 2.0 device connections for full data transfer speeds of up to 480Mbps, and is backward compatible with USB 1.1 devices (max. transfer rate 12Mbps), allowing you to connect any USB device to the computer without having to worry about compatibility issues.


Designed and constructed to provide long-lasting USB capability, the adapter card is backed by StarTech.com's free lifetime technical support.



Product Diagram:

 






Applications: Add additional internal and external USB 2.0 ports to a desktop computer system
Add an internal USB 2.0 header for use with internal/front-bay mounted USB peripherals
Balance the number of available internal and external USB 2.0 ports on a computer system









Features: 4 external USB 2.0 ports and 3 internal USB 2.0 port/headers
High Speed USB 2.0 compliant, with support for data transfer rates up to 480Mbps
Backwards compatible with USB1.1/1.0 devices
Up to 500mA of power per port
Compliant with USB EHCI revision 0.95 and UHCI 1.1 specifications
Compliant with PCI revision 2.2 specification
Supports up to 127 USB devices (requires addition USB hubs)
Plug-and-Play and Hot-Swap compatible









The StarTech.com Advantage: Maximize the availability of USB 2.0 ports for both external and internal USB 2.0/1.1/1.0 peripherals
Backed by a StarTech.com lifetime warranty and free lifetime technical support








Product Drawing:

 





Ports & interfaces Internal Yes Output interface USB 2.0 USB 2.0 ports quantity 4 Host interface PCI/PCI-X Expansion card standard PCI 2.2
Technical details Plug and Play Yes Chipset VIA/VLI - VT6212 Sustainability certificates RoHS
Performance Hot-swap Yes Plug and Play Yes Chipset VIA/VLI - VT6212 Product colour Green
Design Hot-swap Yes Internal Yes Product colour Green Certification CE, FCC, TAA, REACH
Weight & dimensions Width 120 mm Depth 122 mm Height 20 mm Weight 75 g
Packaging data Package width 144 mm Package depth 174 mm Package height 32 mm Package weight 138 g Manual Yes Drivers included Yes Full specification and details can be found in the