RJ45 Couplers & Adapters

The inline coupler is ideal for the extension of existing cabling installations, offering a straight through RJ45 to RJ45 connection

RJ45 UTP Inline Coupler

The inline coupler is ideal for the extension of existing cabling installations, offering a straight through RJ45 to RJ45 connection while maintaining cat5e performance.

Cat6 RJ45 UTP Inline Coupler

The inline coupler is ideal for the extension of existing cabling installations, offering a straight through RJ45 to RJ45 connection while maintaining optimum performance.

The Cat5e Junction box is used to repair unshielded Cat. 5e cables

With this box all 4 or 8 wired installation cables with AWG24 and with a cover from 4mm can be installed Equipped with the modern LSA connection technology, all cables in accordance with EIA/ TIA or 568B can be easily installed

The Cat6 Junction box is used to repair unshielded Cat6 cables

With this box all 4 or 8 wired installation cables with AWG24 and with a cover from 4mm can be installed Equipped with the modern LSA connection technology, all cables in accordance with EIA/ TIA or 568B can be easily installed

RJ45-9 Way Female Kit

These D-Type Adapters are supplied unconfigured allowing on site termination as required. Each unit consists of an RJ45 outlet and D-Type Connector.

RJ45-9 Way Male Kit

These D-Type Adapters are supplied unconfigured allowing on site termination as required. Each unit consists of an RJ45 outlet and D-Type Connector.

 

RJ45-25 Way Female Kit

These D-Type Adapters are supplied unconfigured allowing on site termination as required. Each unit consists of an RJ45 outlet and D-Type Connector.

RJ45-25 Way Female Kit

These D-Type Adapters are supplied unconfigured allowing on site termination as required. Each unit consists of an RJ45 outlet and D-Type Connector.

RJ45-25 Way Male Kit

These D-Type Adapters are supplied unconfigured allowing on site termination as required. Each unit consists of an RJ45 outlet and D-Type Connector.

RJ45 IP67 rated waterproof CAT5E/CAT6 external cord coupler - UTP/FTP
Ideal for CCTV, signage, stadiums, POE lighting, office buildings and all external situations
Shielded design and so ideal for shileded and non-shielded plugs with or without boots
Extra space for different size plug boots and so will accommodate most plug designs
Female to female coupling, can use on suitable pre-terminated cords if required
UL94V0 flame retardant plastic along with Anti-UV properties
Designed for outdoor use on buildings and homes where ingress of water may be an issue. Enabling the joining of two RJ45 terminated external cables specified as CAT5E or CAT6. CAT6 specifies performance characteristics for frequencies up to 250MHz and backwards compatible with CAT5E

Pin out schematic

RJ45 RJ45 Pin Pin 1 to 1 2 to 2 3 to 3 4 to 4 5 to 5 6 to 6 7 to 7 8 to 8