The Eaton SRRAILDPTH1U SmartRack adapter gives you the freedom to position equipment exactly where you need it. Extend gear out by 4 inches to clear the rack door, or recess it by 4 inches for better cable routing and access. Stop compromising on your rack layout - this adapter gives you the choice to configure your system exactly how you need it.
Easy Installation Using the Included Hardware
The SRRAILDPTH1U comes with two steel mounting brackets made from heavy-duty steel with a black powder-coated finish to mesh seamlessly with your rack. Connect the 1U extension brackets to the front rails using the included hardware. Position the brackets outside the rails to increase rack depth or inside the rails to decrease rack depth. Then mount the equipment to the brackets. The SRRAILDPTH1U is compatible with EIA-standard 19-inch open frame racks and enclosures.
The SRRAILDPTH2U lets you adjust the depth so your hardware fits perfectly. Whether you need to extend components for clearance or tuck them back for easier access, this versatile adapter has you covered. It's the simple way to create the perfect fit and keep your rack organized.
Easy Installation Using the Included Hardware
The SRRAILDPTH2U comes with two steel mounting brackets made from heavy-duty steel with a black powder-coated finish to mesh seamlessly with your rack. Connect the 2U extension brackets to the front rails using the included hardware. Position the brackets outside the rails to increase rack depth or inside the rails to decrease rack depth. Then mount the equipment to the brackets. The SRRAILDPTH2U is compatible with EIA-standard 19-inch open frame racks and enclosures.
The SRSHELF2P1USHRT is an essential accessory for IT professionals who demand the best for their racks. With its easy installation and reliable performance, you can free up floor space, reduce cable clutter, and keep your most important devices close at hand. It has a maximum load capacity of 40 pounds (18 kilograms). It mounts easily into 1U of space in an EIA-standard 19-inch 2-post or 4-post enclosure or open frame rack using the included hardware.
Maximizes Rack Space and Saves Desk or Floor Space in a Busy Office
The steel shelf is seven inches (17.8 centimeters) deep for organizing network and other non-rack equipment in your small office or server room. The vented surface allows generous airflow to keep your equipment cool and functioning at its peak. You may mount two SRSHELF2P1USHRT shelves back-to-back in your rack to create a deeper shelf in the same 1U rack space.
The Eaton SRSKIRTEU SmartRack enclosure skirt kit creates a physical barrier that blocks unwanted airflow under your rack cabinet. By segregating cold aisle from hot aisle, you can ensure your equipment stays cool and operates reliably for longer. Plus, the brush strip design stops dust and dirt from getting inside the rack, safeguarding your valuable investments. Installation is a breeze - simply attach the skirt to the bottom of your enclosure and start saving on your energy bills right away.
Installation Is Simple and Hassle-Free
This server rack skirt kit is compatible with Euro-Series rack cabinets, including SRX42 and SRX47, which measure 800 millimeters in width. All necessary mounting equipment is included. Just install the brush strip at floor level across the front or rear of the cabinet to prevent an air stream from forming between hot and cold aisles.
The SRGROUND25 SmartRack grounding bar is a durable, heavy-gauge solid copper strip designed for easy installation on any EIA-standard 24U or 25U rack enclosure or open-frame rack. It features drilled and tapped holes in every other U space, enabling secure ground wire jumper connections for reliable grounding of standard rack equipment. By bridging to individual components with grounding straps, it ensures a direct path to ground, rather than going through surrounding equipment.
Features
Copper grounding bar provides ground contact for your rack-mount equipment
Installs in your 24U or 25U enclosure or open frame rack with included hardware
Recommended for large data centers that have ground-sensitive equipment
Heavy-gauge copper construction with drilled and tapped hole in every other U space
Easy to Install with All Hardware Included
You can mount the SRGROUND25 in any EIA-standard 24U or 25U rack enclosure or open frame rack. Either screw it into a rack enclosure using the included mounting hardware, or install it in an open frame rack with the included toolless mounting buttons. This copper grounding bar is ideal for large data centers that contain ground-sensitive equipment.
The SRCTMTCVR600 SmartRack® roof panel gives you the freedom to populate your hot and cold aisles with server racks of varying sizes. The clear acrylic construction lets natural light flood your data center, reducing your reliance on costly overhead lighting.
Individual Roof Panel Designed for Standard-Width 600 mm Server Racks
Pre-drilled holes allow easy installation using the included hardware with easy modification if needed. Filler panels attach magnetically to fill the open space between the rack cabinet and the containment frame’s upper support beam. Rubber gaskets provide a tight seal that improves thermal efficiency in your rack cooling system.
Aisle Containment System Manages Airflow for More Cooling Efficiency
Upon installation in your data center or server room, the modular, easy-to-assemble Aisle Containment System contains the air in a hot aisle or cold aisle, essentially creating a room within the aisle, while still keeping the aisle accessible. No costly contractor or HVAC specialist is required to install the system, which can be expanded or adapted to meet your needs.
Assorted frame kits, beam kits, sliding double-door kits, roof panel kits and adapter riser panel kits (all sold separately) are necessary to assemble a hot or cold Aisle Containment System that accommodates the dimensions of your aisle and the rack enclosures within it.
You can finally take full control of your data center's climate with the Eaton SRCTMTFRM frame end kit. By isolating hot and cold aisles, you'll enjoy dramatically improved airflow management and temperature distribution - translating to lower utility bills and a more reliable, stable environment for your critical IT equipment. It's an essential upgrade for any organization serious about maximizing their data center's energy efficiency and performance.
The SRCTMTFRM must also be paired with SRCTMTTLBM Beam Kit and SRCTMTSDD Sliding Double-Door Kit (both sold separately). Note: the Aisle Containment System can be configured to be a self-standing unit (tied to racks on both ends) or can be tied directly to a wall at the end of an aisle, no longer needing a second SRCTMTSDD to seal the end.
Accommodates Various Server Rack Heights from 42U to 48U
The steel frame with black powder-coated finish features pre-drilled mounting holes for the telescopic beam kit (SRCTMTTLBM), making installation efficient and effective, and pre-tapped holes for further fortification. Stabilizing brackets are provided at both feet, allowing the frame to be directly affixed to the floor of your data center. All necessary hardware is included for assembly. Multiple frame kits may be connected together for larger containment arrays.
Aisle Containment System Manages Airflow for More Cooling Efficiency
Upon installation in your data center or server room, the modular, easy-to-assemble Aisle Containment System contains the air in a hot aisle or cold aisle, essentially creating a room within the aisle, while still keeping the aisle accessible. No costly contractor or HVAC specialist is required to install the system, which can be expanded or adapted to meet your needs.
Assorted frame kits, beam kits, sliding double-door kits, roof panel kits and adapter riser panel kits (all sold separately) are necessary to assemble a hot or cold Aisle Containment System that accommodates the dimensions of your aisle and the rack enclosures within it.
The Eaton SRCTMTSDD is a must-have for any data center manager looking to maximize energy efficiency and equipment performance. These durable double doors integrate with your aisle containment system, allowing you to open the aisle when needed while maintaining a tight seal the rest of the time. This traps hot or cold air inside, dramatically improving your facility's heating and cooling efficiency.
Designed to Keep Your Mission-Critical Rack Components Safe
The sliding doors lock securely with the included keys to deter tampering, damage or theft. Clear acrylic windows let you keep an eye on the aisle’s contents without having to unlock the doors and step inside. This double-door kit is only compatible with SRCTMTFRM Frame End Kit (sold separately), which has pre-tapped holes designed for attaching the doors.
Aisle Containment System Manages Airflow for More Cooling Efficiency
Upon installation in your data center or server room, the modular, easy-to-assemble Aisle Containment System contains the air in a hot aisle or cold aisle, essentially creating a room within the aisle, while still keeping the aisle accessible. No costly contractor or HVAC specialist is required to install the system, which can be expanded or adapted to meet your needs. Assorted frame kits, beam kits, sliding double-door kits, roof panel kits and adapter riser panel kits (all sold separately) are necessary to assemble a hot or cold Aisle Containment System that accommodates the dimensions of your aisle and the rack enclosures within it.
