Datacel Empty Modular PDU Chassis

The Modular PDU Series gives the Installer and End User alike complete freedom to place the correct power socket in a cabinet in the correct place every time.

Using a Vertical Zero U body with inputs of anything up to 16A and 32A, all have RCBO protection and a digital amp / volt meter option.

Two Chassis sizes of 4 or 5 compartment which fit comfortably in a 42U cabinet, give the flexibility of placing the power modules nearest the equipment, and there are 11 different modules to choose, various versions of UK, C13, C19, Overseas and individually fused options.

The Chassis has a bus bar backplane that feeds the first to last socket all the time so that any module can be hot swapped anywhere in the chassis without powering down the PDU, the modules only become live when fully inserted and can be removed only when the locking mechanism is pressed, we offer a blank module to tidy up the appearance but it isn’t necessary, so the overall cost of the Modular PDU will always be in the control of the specifier.

Vertical PDU which allows hot swapping of individual modules.

The power modules can be interchanged with no need to disconnect the PDU, thanks to the design of the modular chassis

The 16A modular chassis has a panel mount C20 power input, meaning different cord length and plug options are available

All modular PDUs are protected by an RCBO, rated to either 16A or 32A

16A Chassis Power Cords

The C20 input allows for multiple choice power cords, please see the list below

C19 socket to 13A plug (not recommended for 16A C19 sockets)

C19 socket to IEC C14 plug (not recommended for 16A C19 sockets)

C19 socket to IEC C20 plug

C19 socket to 16A Commando plug

Note. 13A and C14 (10A) are not recommended for C19 plugs as equipment designed to use C20 plugs may draw up to 16A, check your active equipment specifications before using inputs less than 16A

The Modular PDU Series gives the Installer and End User alike complete freedom to place the correct power socket in a cabinet in the correct place every time.
Using a Vertical Zero U body with inputs of anything up to 16A and 32A, all have RCBO protection and a digital amp / volt meter option.

Two Chassis sizes of 4 or 5 compartment which fit comfortably in a 42U cabinet, give the flexibility of placing the power modules nearest the equipment, and there are 11 different modules to choose, various versions of UK, C13, C19, Overseas and individually fused options.

The Chassis has a bus bar backplane that feeds the first to last socket all the time so that any module can be hot swapped anywhere in the chassis without powering down the PDU, the modules only become live when fully inserted and can be removed only when the locking mechanism is pressed, we offer a blank module to tidy up the appearance but it isn’t necessary, so the overall cost of the Modular PDU will always be in the control of the specifier.

Vertical PDU which allows hot swapping of individual modules.

The power modules can be interchanged with no need to disconnect the PDU, thanks to the design of the modular chassis

The 16A modular chassis has a panel mount C20 power input, meaning different cord length and plug options are available

All modular PDUs are protected by an RCBO, rated to either 16A or 32A


16A Chassis Power Cords

The C20 input allows for multiple choice power cords, please see the list below

C19 socket to 13A plug (not recommended for 16A C19 sockets)

C19 socket to IEC C14 plug (not recommended for 16A C19 sockets)

C19 socket to IEC C20 plug

C19 socket to 16A Commando plug

Note. 13A and C14 (10A) are not recommended for C19 plugs as equipment designed to use C20 plugs may draw up to 16A, check your active equipment specifications before using inputs less than 16A