Product Details
Labels for the BMP61 Thermal Transfer Portable Printers. These parts can also be printed on the BMP™71 Label Printer provided the roll adapter (M71-ADAPT) is used.
Product Features
Brady Material Type: Paper
Brady Material No.: B-424
Adhesive: Permanent Rubber
Finish: Matt
Surface: For smooth surfaces
Printer Compatibility: BMP61, BMP71 (with media adapter)
Print Technology: Thermal Transfer
Label Properties: Permanent Adhesive
Resistance Properties: Abrasion-resistant, Humidity-resistant, Smear-resistant, UV-resistant
Applications: Barcode labelling, Electrical labelling, General identification, Laboratory labelling
Length: |
Product Details
ToughBond® Ultra Aggressive Polyester (B-483) is perfect for labeling products and general ID and can be applied to powder coated, smooth, textured or irregular surfaces.
Glossy white polyester with permanent rubber based adhesive is thermal transfer printable
Material is designed for high adhesion to textured metals and low surface energy plastics
UL approved; CSA accepted
Service temperature of -40 to 248° F (-40 to 120° C)
A ribbon is required to print this material. Use Part Number M61-R6010 for the BMP®61 Label Printer or M71-R6000 for the BMP®71 Label Printer
Product Features
Brady Material Type: Polyester
Brady Material No.: B-483A
Finish: Gloss
Adhesive: Permanent Rubber
Surface: For smooth, textured/rough or Highly textured/Low surface energy surfaces
Label Properties: Aggressive Adhesive, Heat Resistant, Low Temperature
Printer Compatibility: BMP61, BMP71 (with media adapter)
Print Technology: Thermal Transfer
Resistance Properties: Abrasion-resistant, Chemical-resistant, Corrosion-resistant, Humidity-resistant, UV-resistant, Weather-resistant
Application(s): Asset tracking, Barcode labelling, Component and equipment labelling, Data and telecommunications labelling, Electrical labelling, General identification, Inventory and inspection labelling
Additional Information: Ultra-aggressive adhesive; Designed for powder coated surfaces
Length: |
Product Details
High Temperature Polyimide (B-727) withstands wave solder environments and multiple harsh washes for printed circuit board and electronic component preprocess labeling.
Ultra-durable adhesive is designed for use with extreme wash protocol and cleaning chemicals, and is ideal for use in auto apply equipment
Glossy white polyimide material is thermal transfer printable
UL Approved;Meets requirements of MIL-STD-202G, Method 215K
Service temperature of -94 to 212° F (-70 to 100° C)
Equivalent for M610 and M611 printers: M6-2-727
A ribbon is required to print this material. Use Part Number M61-R6010 for the BMP®61 Label Printer or M71-R6000 for the BMP®71 Label Printer
Product Features
Brady Material Type: Polyimide
Brady Material No.: B-727
Finish: Gloss
Printer Compatibility: BMP61, BMP71 (with media adapter)
Surface: For smooth surfaces
Label Properties: Heat Resistant, Permanent Adhesive
Print Technology: Thermal Transfer
Resistance Properties: Abrasion-resistant, Chemical-resistant, Corrosion-resistant, Humidity-resistant, UV-resistant
Application(s): Circuit board labelling, Component and equipment labelling, Temperature indicating labelling
Board Application: Surface Mount Technology (SMT) - Top/Bottom, Through Hole Technology - Bottom, Through Hole Technology - Top
Product Details
Permanent Polyester (B-423) is ideal for electronic PCB and component identification, bar code labels, rating plates and solar panel identification.
Glossy white finish with permanent acrylic is thermal transfer printable
UL approved;CSA accepted
Meets requirements of a halogen-free material per DIN VDE 0472 part 815
Service temperature of -94 to 230° F (-70 to 110° C)
Equivalent for M610 and M611 printers: M6-10-423
"A ribbon is required to print this material. Use Part Number M61-R6010 for the BMP®61 Label Printer or M71-R6000 for the BMP®71 Label Printer"
Product Features
Brady Material Type: Polyester
Brady Material No.: B-423
Finish: Gloss
Adhesive: Permanent Acrylic
Surface: For smooth surfaces
Label Properties: Aggressive Adhesive, Harsh Environment, Heat Resistant, Permanent Adhesive
Printer Compatibility: BMP61, BMP71 (with media adapter)
Print Technology: Thermal Transfer
Resistance Properties: Abrasion-resistant, Chemical-resistant, Corrosion-resistant, Humidity-resistant, UV-resistant, Weather-resistant
Application(s): Barcode labelling, Circuit board labelling, Data and telecommunications labelling, General identification, Inventory and inspection labelling
Length: |
Product Details
Self-Laminating Vinyl (B-427) is an excellent material for wire and cable identification. This material has good clarity, conformability and is self-extinguishing.
Provided in a self-laminated format with a yellow printable zone and translucent overlaminating area to protect text
Durable, permanent acrylic adhesive has outstanding water and oil resistance
UL approved
Service temperature of -40°F to 158°F (-40°C to 70°C)
Equivalent for M610 and M611 printers: M6-11-427-YL
A ribbon is required to print this material. Use Part Number M61-R4310 for the BMP®61 Label Printer or M71-R4300 for the BMP®71 Label Printer
Product Features
Brady Material Type: Self-laminating & Wrap Around
Brady Material No.: B-427
Finish: Matt
Adhesive: Permanent Acrylic
Surface: For smooth & textured/rough surfaces
Label Properties: Self-laminating & Wrap Around
Printer Compatibility: BMP61, BMP71 (with media adapter)
Print Technology: Thermal Transfer
Resistance Properties: Chemical-resistant, Humidity-resistant, Oil-resistant, Water-resistant, Weather-resistant
Application(s): Data and telecommunications labelling, Electrical labelling, Laboratory labelling, Wire and cable labelling
Additional Information: Self-laminating; Self-Extinguishing; Excellent water & oil resistance; Excellent abrasion and smudge resistance
Length: |
Product Details
Labels for the BMP61 Thermal Transfer Portable Printers. Please Note: This material is UL approved with its respective ribbon. See the Recommended Ribbon Series for the appropriate ribbon to use. These parts can also be printed on the BMP™71 Label Printer provided the roll adapter (M71-ADAPT) is used.
Equivalent for M610 and M611 printers: M6-29-427
Product Features
Brady Material Type: Self-laminating Vinyl
Brady Material No.: B-427
Finish: Matt
Adhesive: Permanent Acrylic
Surface: For smooth & textured/rough surfaces
Label Properties: Self-laminating & Wrap Around
Printer Compatibility: BMP61, BMP71 (with media adapter)
Print Technology: Thermal Transfer
Resistance Properties: Chemical-resistant, Humidity-resistant, Oil-resistant, Water-resistant, Weather-resistant
Application(s): Data and telecommunications labelling, Electrical labelling, Laboratory labelling, Wire and cable labelling
Additional Information: Self-laminating; Self-Extinguishing; Excellent water & oil resistance; Excellent abrasion and smudge resistance
Length: |
Product Details
Permanent or repositionable: once applied, B-498 CleanLift® Series Vinyl Cloth is there to stay… unless you want to change it.
The adhesive and cloth backing offers excellent holding power, yet allow for clean removal and repositioning
Sticks to any clean, dry surface
Specially formulated topcoat for excellent print quality
Semi-gloss finish for crisp, clean look
Equivalent for M610 and M611 printers: M6-29-498
A ribbon is required to print this material. Use Part Number M61-R6210 for the BMP®61 Label Printer or M71-R6200 for the BMP®71 Label Printer
Product Features
Brady Material Type: Vinyl Cloth
Brady Material No.: B-498
Finish: Semi-gloss
Adhesive: Repositionable Rubber
Surface: For smooth & textured/rough surfaces
Label Properties: Removable, Repositionable
Printer Compatibility: BMP61, BMP71 (with media adapter)
Print Technology: Thermal Transfer
Resistance Properties: Abrasion-resistant, Chemical-resistant, Corrosion-resistant, Humidity-resistant, UV-resistant, Weather-resistant
Application(s): Barcode labelling, Circuit board labelling, Component and equipment labelling, Laboratory labelling, Wire and cable labelling
Laboratory Applications: Bottles, Conical Tubes, Cryo Tubes, Dishes, Flasks, General Laboratory Identification, Large Tubes, Petri Dishes, Vials, Well Plates
Length: |
Product Details
PermaSleeve™ Heat Shrinkable Wire Marker Sleeves for the BMP61 Thermal Transfer Portable Printers. These parts can also be printed on the BMP™71 Label Printer provided the roll adapter (M71-ADAPT-BK) is used.
Product Features
Brady Material Type: Heat-shrink Polyolefin
Brady Material No.: B-432
Finish: Matt
Shrink Ratio: 3:1
Printer Compatibility: BMP61, BMP71 (with media adapter)
Label Properties: Heat Shrink
Print Technology: Thermal Transfer
Resistance Properties: Chemical-resistant, Corrosion-resistant, Humidity-resistant, Smear-resistant, UV-resistant, Weather-resistant
Application(s): Electrical labelling, Wire and cable labelling
Additional Information: Heat-shrinkable; Self-Extinguishing
Colour: |
Product Details
PermaSleeve™ Heat Shrinkable Wire Marker Sleeves for the BMP61 Thermal Transfer Portable Printers. These parts can also be printed on the BMP™71 Label Printer provided the roll adapter (M71-ADAPT-BK) is used.
Equivalent for M610 and M611 printers: M6-187-1-342-WT
Product Features
Brady Material Type: Heat-shrink Polyolefin
Brady Material No.: B-432
Finish: Matt
Shrink Ratio: 3:1
Printer Compatibility: BMP61, BMP71 (with media adapter)
Label Properties: Heat Shrink
Print Technology: Thermal Transfer
Resistance Properties: Chemical-resistant, Corrosion-resistant, Humidity-resistant, Smear-resistant, UV-resistant, Weather-resistant
Application(s): Electrical labelling, Wire and cable labelling
Additional Information: Heat-shrinkable; Self-Extinguishing
Colour: | |
Length: |
Product Details
Permanent Vinyl (B-439) is a thermal transfer printable material ideal for applications needing various colors like finished product ID, rating plates and general purpose ID.
Available in many different colors as a custom option
Designed for use in ambient conditions with limited solvent exposure
Indoor/outdoor vinyl film has an acrylic pressure sensitive adhesive
Service temperature of -94 to 104° F (-70 to 40° C)
A ribbon is required to print this material. Use Part Number M61-R6010 for the BMP®61 Label Printer or M71-R6000 for the BMP®71 Label Printer
Product Features
Brady Material Type: Vinyl
Brady Material No.: B-439
Finish: Gloss
Printer Compatibility: BMP61, BMP71 (with media adapter)
Surface: For smooth & textured/rough surfaces
Label Properties: Aggressive Adhesive, Harsh Environment, Permanent Adhesive
Print Technology: Thermal Transfer
Resistance Properties: Abrasion-resistant, Chemical-resistant, Corrosion-resistant, Humidity-resistant, UV-resistant, Weather-resistant
Application(s): Barcode labelling, Component and equipment labelling, Data and telecommunications labelling, Electrical labelling, General identification, Inventory and inspection labelling
Voice/Data Application: Outlet/Jack ID, Patch Panel
Colour: | |
Length: |
Product Details
PermaShield™ Labels for the BMP61 Thermal Transfer Portable Printers. A Metallised polyester label that comes with a separate overlaminate to be applied over the label once printed. Overlaminate is a clear polyester (B-966B) that extends 0.125" outside of label on each side when applied. Please Note: This material is UL, CSA & AGA approved with its respective ribbon.
Product Features
Brady Material Type: Paper
Brady Material No.: B-424 / B-422
Finish: Matt
Printer Compatibility: BMP61, BMP71 (with media adapter)
Surface: For smooth surfaces
Label Properties: Permanent Adhesive
Print Technology: Thermal Transfer
Resistance Properties: Abrasion-resistant, Humidity-resistant, Smear-resistant, UV-resistant
Application(s): Barcode labelling, Electrical labelling, General identification, Laboratory labelling
Laboratory Application: General Laboratory Identification, Slides
Length: |
Product Details
Static Dissipative Polyimide (B-719) withstands wave solder environments and multiple harsh washes for printed circuit board and electronic component preprocess labeling.
Low profile, high temperature, matte white polyimide material features a static dissipative adhesive and static dissipative release liner
Surface resistivity values in the recommended range for Dissipative ESD packaging materials as defined by ANSI/ESD S541-2008
UL Approved; Meets requirements of MIL-STD-202G, Method 215K
Service temperature of -94 to 212° F (-70 to 100° C)
Equivalent for M610 and M611 printers: M6-6-719
A ribbon is required to print this material. Use Part Number M61-R6010 for the BMP®61 Label Printer / BradyPrinter M611 Mobile Label Printer or M71-R6000 for the BMP®71 Label Printer
Product Features
Brady Material Type: Polyimide
Brady Material No.: B-719
Finish: Matt
Adhesive: Static Dissipative Permanent Acrylic
Printer Compatibility: BMP61, BMP71 (with media adapter)
Label Properties: Heat Resistant, Permanent Adhesive
Performance Characteristics: Abrasion resistance, Electrostatic dissipative, High heat resistance, Low temperature resistance, Solvent/Chemical resistance
Print Technology: Thermal Transfer
Resistance Properties: Chemical-resistant, Fluid-resistant, High Temperature-resistant
Application(s): Circuit board labelling
Additional Information: Static dissipative adhesive; Low profile
Length: |
Product Details
These B-7643 cable tags contain no added halogens and offer excellent fire safety characteristics combined with minimal smoke emission.
Product Features
Brady Material Type: Thermoplastic Polyether Polyurethane
Brady Material No.: B-7643
Finish: Matt
Printer Compatibility: BMP61, BMP71 (with media adapter)
Print Technology: Thermal Transfer
Resistance Properties: Abrasion-resistant, Chemical-resistant, Humidity-resistant
Application(s): Data and telecommunications labelling, Wire and cable labelling
Colour: |
Product Details
The B-7598 polyester cable identification tag has been developed to keep cables identified in outdoor environments. It offers up to 10 year outdoor legibility and durability and is available in 7 colours.
Product Features
Brady Material Type: Polyester
Brady Material No.: B-7598
Finish: Gloss
Printer Compatibility: BMP61, BMP71 (with media adapter)
Print Technology: Thermal Transfer
Resistance Properties: Abrasion-resistant, Chemical-resistant, Humidity-resistant
Application(s): Data and telecommunications labelling, Wire and cable labelling
Colour: |
Product Details
Polypropylene Tag Stock (B-412) is ideal for wire and cable identification and product inventory identification, where legibility and tensile strength are needed.
Non-adhesive, matte finish material is thermal transfer printable
Good abrasion and chemical resistance
Service temperature of -40°F to 100°F (-40°C to 38°C)
Equivalent for M610 and M611 printers: M6C-785-412
A ribbon is required to print this material. Use Part Number M61-R6210 for the BMP®61 Label Printer or M71-R6200 for the BMP®71 Label Printer
Product Features
Brady Material Type: Polypropylene
Brady Material No.: B-412
Finish: Matt
Printer Compatibility: BMP61, BMP71 (with media adapter)
Print Technology: Thermal Transfer
Resistance Properties: Chemical-resistant, Corrosion-resistant, Humidity-resistant, Tear-resistant, UV-resistant, Weather-resistant
Application(s): Electrical labelling, Wire and cable labelling
Length: |
Product Details
The B-7598 polyester cable identification tag has been developed to keep cables identified in outdoor environments. It offers up to 10 year outdoor legibility and durability and is available in 7 colours.
Product Features
Brady Material Type: Polyester
Brady Material No.: B-7598
Finish: Gloss
Printer Compatibility: BMP61, BMP71 (with media adapter)
Print Technology: Thermal Transfer
Application(s): Data and telecommunications labelling, Wire and cable labelling
Colour: |
