When polishing the ferrule of the connector it is essential that the process is kept clean, this ensures accurate and repeatable polishing.
Lint-free tissues are a versatile consumable for many applications. They are mainly used to clean bare fibre as part of the termination or splicing process.
The lint free characteristic allows them to be used for a multitude of other purposes such as cleaning optical equipment and preparing work surfaces.
Features
Super fast absorbency
Can be used dry or with fluid
Removes and absorbs dirt / grease /water / chemicals
Tear resistant
Strong non woven material
Material: 44% wood pile tissue & 56% Terylene
Size: 100mm x 100mm
Thickness: 0.05mm
Absorbency rate: 560%
Absorbency speed: 5 seconds
Class:10000
Pack Size: |
For cleaning your workplace in the office and at home
With small tube for hard to reach places
Very high volume
Note for Consumers:
Observe the information provided by the device manufacturer
Before cleaning, disconnect device from the power supply and allow to cool
Only use in upstanding position - liquid gas may escape and cause freeze / material damage
Disposal must be made according to official regulations
Do not shake
Features
Sold in Pack of 100 individually wrapped
Fast Evaporating Single Use Pre-Moistened swabs
Ideal for removing dirt, dust and oil
Approximate size - Folded 30mm x 30mm, unfolded 30mm x 60mm
Absorbant fibre-free swabs, contains 70% (IPA) Alcohol
Small in size, these are not large handwipes
Foam buds are the ideal consumable for cleaning bulkheads after installation. They are used to clean the end faces of installed connectors, from inside the enclosure. The snug fit from the foam head will also remove any contaminants found inside the adapter.
Features
Can be used dry or with fluid
Fast absorbency
Efficient removal of contaminants
Leaves no lint / fluff / dust particles
Removes and absorbs dirt / grease / water / chemicals
Thickness: 0.05mm
Absorb speed: 6-8 seconds
Class: 10000
Micro fibre sticks are the ideal consumable for cleaning 1.25mm bulkheads after installation. They can be used to clean the end faces of installed connectors, from inside the enclosure.
Cleaning is achieved by inserting the micro fibre tip inside the adapter’s aperture and twisting once. The micro fibre material allows the user to clean installed connector end faces without scratching the surface, and ensures a perfect clean first time.
Features
Works with 1.25mm adapters: LC, MU
Material: Micro fibre, antistatic
Size:10mm x 4mm (body) 13mm x 2mm (head)
