Multi-Buy Offers

CE patch panels comply with the current standards for enhanced Category 5e. CE 5e patch panels are designed to minimise deployment time and maximise connection strength. Each panel offers a choice of labelling systems to include both labelling fields with writable surface and separate identification strips are provided to allow further labelling where required.

Comes Complete with:
4 x M6 Cage nuts & bolts for fixing in to a cabinet, coloured black to match the panel itself.
4 x Cable management rings.
5 x 150mm Cable ties to aid cable management
4 x Self adhesive plastic label holders c/w write on paper labels
1 x Sheet of pre printed numbers 1 to 96
1 x Termination instruction sheet
Key features of 24 Port Cat5e Patch Panel - RJ45 UTP Durable lacquered steel front panel.
Conforms to ANSI/EIA/TIA, ISO/IEC11801 and EN50173 Category 5e standard, FCC part 68 requirements.
Gold over Nickel plated jack contacts.
Phosphor Bronze & Nickel plated IDC terminals.
IDC terminals accept 22 to 26AWG solid and stranded wires.




Accessories
(Sold Separately)

Cat5e Patch Leads IDC Punchdown Tool Cat5e Solid Cable Cat5e Modules

The design of this innovative right angled patch panel makes installation simple with the IDC termination blocks at 90 degrees to the panel. With built in cable management to the rear installtions can be kept clean and tidy.

CE patch panels comply with the current standards for enhanced Category 5e. CE 5e patch panels are designed to minimise deployment time and maximise connection strength. Each panel offers a choice of labelling systems to include both labelling fields with writable surface and separate identification strips are provided to allow further labelling where required.

Key Features of 24 Port Cat5e Patch Panel - Right Angled RJ45 UTP: Cable management system built into the rear
Durable lacquered steel front panel.
Conforms to ANSI/EIA/TIA, ISO/IEC11801 and EN50173 Category 5e standard, FCC part 68 requirements.
Gold over Nickel plated jack contacts.
Phosphor Bronze & Nickel plated IDC terminals.
IDC terminals accept 22 to 26AWG solid and stranded wires.




Accessories
(Sold Separately)

Cat5e Patch Leads IDC Punchdown Tool Cat5e Solid Cable Cat5e Modules

Excel 48-Port 2U Category 5e Patch Panel | High-Density Gigabit Solution The Excel Category 5e Patch Panel is a professional-grade 2U solution engineered to exceed "Enhanced Category 5" standards. Designed for high-demand networking environments, this panel supports Gigabit Ethernet with significant performance headroom, ensuring reliable data transmission for critical enterprise applications.

Performance & Testing Rigor Exceeds Industry Standards: Rigorously tested to TIA and ISO Category 5e specifications.


Advanced Frequency Analysis: Every panel undergoes swept frequency testing for critical characteristics, including Near-End Crosstalk (NEXT) and Far-End Crosstalk (FEXT).


Power Sum Certified: Verified using both Worst Case and Power Sum test methods to ensure maximum signal integrity and reduced interference.


Installation & Versatile Labeling LSA Style Termination: Features industry-standard LSA IDC blocks for fast, reliable punchdown termination.


Dual Wiring: Supports both T568A and T568B wiring configurations for global compatibility.


Advanced Labeling System: Offers three distinct labeling methods to suit any workflow:

Screen-printed fields on the panel fascia.


An integrated slide label system.


Included pre-printed 1-96 self-adhesive labels.



Design & Included Hardware High-Capacity 2U Form Factor: Provides 48 ports in a standard 19-inch 2U footprint, perfect for high-density rack setups.


Enhanced Cable Management: Designed with ample rear positions to ensure neat cable dressing and strain relief.


Complete Kit: Ships with cage nuts and mini cable ties included, making it ready for immediate deployment.


Technical Specifications Feature Specification Details Category Category 5e (Enhanced) Performance Supports Gigabit Ethernet (1000Base-T) Port Count 48-Port RJ45 Rack Height 2U (19-inch Rackmount) Termination Type LSA Style IDC Wiring Standard T568A / T568B Testing Standards TIA/EIA-568-B.2-2001, ISO/IEC 11801:2002 Expert Note: The Excel 2U design provides extra vertical space between ports compared to 1U high-density panels, making it easier to manage patch cords in high-traffic cabinets.








Accessories
(Sold Separately)

Cat5e Patch Leads IDC Punchdown Tool Cat5e Solid Cable Cat5e Modules

CE Cat5e 2U Rackmount Patch Panel | High-Strength Connectivity The CE Category 5e Patch Panel is a heavy-duty, 2U rack-mounted solution engineered for high-performance Ethernet networks. Built to exceed "Enhanced Cat5e" specifications, this panel is designed to reduce installation overhead while providing maximum connection reliability for critical data infrastructure.

Performance & Standard Compliance Global Standard Certification: Fully conforms to ANSI/EIA/TIA, ISO/IEC11801, and EN50173 Category 5e standards, ensuring compatibility with all certified network hardware.


Premium Signal Integrity: Features Gold over Nickel plated jack contacts to prevent oxidation and ensure consistent high-speed data transmission.


Versatile Termination: Equipped with Phosphor Bronze and Nickel-plated IDC terminals that securely accept 22-26 AWG solid and stranded wires.


FCC Compliance: Meets FCC Part 68 requirements for telecommunications equipment.


Professional Build & Design Rugged Steel Chassis: The front panel is manufactured from durable lacquered steel, offering superior structural rigidity for full-capacity cable loads.


2U Form Factor: Optimized for standard 19-inch racks, providing a spacious layout for easier maintenance and port identification.


Deployment Ready: Specifically designed to minimize deployment time through an accessible IDC layout and included mounting hardware.




Technical Specifications Feature Specification Performance Category Enhanced Cat5e Rack Height 2U (19-inch standard) Material Lacquered Steel Front Panel Jack Contacts Gold over Nickel Plated IDC Terminals Phosphor Bronze & Nickel Plated Wire Gauge Support 22 to 26 AWG (Solid or Stranded) Compliance ANSI/TIA, ISO/IEC, EN50173, FCC Part 68

Installation Kit Included The CE 2U panel is shipped with a complete professional hardware set to ensure immediate installation:

4 x M6 Cage Nuts & Bolts: Finished in black to match the panel for a clean, professional aesthetic within the cabinet.


24 x 80mm Cable Ties: Included to assist with organized cable dressing and integrated strain relief.











Accessories
(Sold Separately)

Cat5e Patch Leads IDC Punchdown Tool Cat5e Solid Cable Cat5e Modules

CE Cat5e High-Density Patch Panel | 1U 24-Port The CE Category 5e Patch Panel is a professional-grade networking hub engineered to exceed enhanced Cat5e standards. Designed to minimize deployment time while maximizing signal integrity, this 1U panel is ideal for high-performance Ethernet environments requiring strict adherence to global cabling specifications.

Performance & Build Quality Standard Compliance: Fully conforms to ANSI/EIA/TIA, ISO/IEC11801, and EN50173 Category 5e standards, as well as FCC Part 68 requirements.


Premium Contacts: Features Gold over Nickel plated jack contacts for superior conductivity and resistance to corrosion.


Rugged IDC Terminals: Built with Phosphor Bronze and Nickel-plated IDC terminals, ensuring a gas-tight connection that accepts 22-26 AWG solid and stranded wires.


Durable Construction: The front panel is manufactured from high-strength lacquered steel, providing a rigid, professional finish for heavy-duty use.


Efficiency & Cable Management Space-Saving 1U Design: High-density architecture allows for 24 ports in a single rack unit, optimizing cabinet space.


Rapid Deployment: Engineered specifically to reduce installation time with accessible termination points and clear labeling.






Technical Specifications Feature Specification Category Enhanced Cat5e (UTP) Rack Height 1U (19-inch standard) Panel Material Lacquered Steel Contact Plating Gold over Nickel IDC Material Phosphor Bronze & Nickel Plated Wire Range 22 to 26 AWG (Solid or Stranded) Standards ANSI/TIA, ISO/IEC11801, EN50173, FCC Part 68



What’s Included This panel comes as a complete installation kit, ensuring you have everything needed for a secure mount:

4 x M6 Cage Nuts & Bolts: Color-matched in black to blend seamlessly with the panel and rack.


24 x 80mm Cable Ties: Provided to assist with neat cable dressing and effective strain relief.













Accessories
(Sold Separately)

Cat5e Patch Leads IDC Punchdown Tool Cat5e Solid Cable Cat5e Modules

The CE 24 Port Cat6 Patch Panel meets all the current standards for Cat6. Termination is provided on the rear in the form of Krone Style IDC punchdown connectors. The panel also comes as standard with a detachable rear cable management bar.

Comes Complete with:
4x M6 cage nuts & bolts for fixing the panel in to a cabinet, coloured black to match the panel itself.
25x 80mm cable ties to aid with cable management.
4x Self adhesive plastic label holders c/w write on paper labels
1x Sheet of pre printed numbers 1-96
1x Termination instruction sheet
Features:

Durable lacquered steel front panel.
Tested to conform to all the current ANSI/TIA/EIA 568 B.2 standards.
Gold over Nickel plated jack contacts.
Phosphor Bronze & Nickel plated IDC terminals.
IDC terminals accept 22 to 26AWG solid and stranded wires.
Accessories
(Sold Separately)

Cat6 Patch Leads IDC Punchdown Tool Cat6 Solid Cable Cat6 Modules

This Through Coupler Panel provides 24 RJ45 Cat5e Ports. RJ45 sockets on the rear allow for termination without the need for any tooling.

CE patch panels comply with the current standards for enhanced Category 5e. CE 5e patch panels are designed to minimise deployment time and maximise connection strength.

These panels are tested to confirm to all the current ANSI/TIA/EIA 568 B.2 standards.

Comes Complete with: 4 x M6 Cage nuts & bolts for fixing in to a cabinet, coloured black to match the panel itself.
24 x 80mm Cable ties to aid cable management
Key Features of 24 Port Cat5e Patch Panel -  RJ45 Through Coupler 1u Comes supplied with an attachable rear cable management bar and mounting screws
Supports Gigabit Ethernet
RJ45 Ports front and rear
Through Coupler
Category 5e
Ports numbered 1-24




Accessories
(Sold Separately)

Cat5e Patch Leads Cat5e Modules

The CE 48 Port Cat6 Patch Panel meets all the current standards for Cat6. Termination is provided on the rear in the form of Krone Style IDC punchdown connectors.

Comes Complete with:
4 x M6 Cage nuts & bolts for fixing in to a cabinet, coloured black to match the panel itself.
24 x 80mm Cable ties to aid cable management
Features:

Durable lacquered steel front panel.
Tested to conform to all the current ANSI/TIA/EIA 568 B.2 standards.
Gold over Nickel plated jack contacts.
Phosphor Bronze & Nickel plated IDC terminals.
IDC terminals accept 22 to 26AWG solid and stranded wires.
Accessories
(Sold Separately)

Cat6 Patch Leads IDC Punchdown Tool Cat6 Solid Cable Cat6 Modules

The CE 48 Port Cat6 Patch Panel meets all the current standards for Cat6. Termination is provided on the rear in the form of Krone Style IDC punchdown connectors.

Comes Complete with:
4 x M6 Cage nuts & bolts for fixing in to a cabinet, coloured black to match the panel itself.
24 x 80mm Cable ties to aid cable management
Features:

1u High Density Design
Durable lacquered steel front panel.
Tested to conform to all the current ANSI/TIA/EIA 568 B.2 standards.
Gold over Nickel plated jack contacts.
Phosphor Bronze & Nickel plated IDC terminals.
IDC terminals accept 22 to 26AWG solid and stranded wires.
Accessories
(Sold Separately)

Cat6 Patch Leads IDC Punchdown Tool Cat6 Solid Cable Cat6 Modules

Available in 1u, 2u, 3u and 4u heights
1.2mm steel
Powder coated in fine textured high quality paint
Upper and lower edges formed with 10mm flanges

Colour: Ral 9005 Black

FC Singlemode Loaded Fibre Patch Panels

LC Multimode Loaded Fibre Patch Panels

Features

6 x LC Fibre Modules (12 or 24 port)
Rack Mountable Steel Box
24 Module Capacity

SC Multimode Loaded Fibre Patch Panels

Features:

One piece body construction eliminates fibre snagging
Quick release lid assembly is locked and removed using 1/4 twist fasteners
Flush or recessed mounting
1U high for up to 24 ST ports or 12 x SC Duplex ports
Knock-outs are provided for rear cable entry
Screen printed ports for easy identification
Write-on identification strip as standard

ST Multimode Loaded Fibre Patch Panels

Features:

One piece body construction eliminates fibre snagging
Quick release lid assembly is locked and removed using 1/4 twist fasteners
Flush or recessed mounting
1U high for up to 24 ST ports or 12 x FC Duplex ports
Knock-outs are provided for rear cable entry
Screen printed ports for easy identification
Write-on identification strip as standard
Available unloaded or loaded with in-line adaptors
The Unloaded (UL) version includes the panel, 4 x self-adhesive twisty cleats, a cable gland and a panel fixing kit
The Loaded (DT) version includes the panel loaded with in-line adaptors, 4 x self-adhesive twisty cleats, a cable gland and a panel fixing kit

UK Made 1u and 2u Cable management (dump) panels with open slot trunking and a lid that snaps onto the top, the perfect solution for hiding cables

Cable Dump Panel 1u - Depth = 6cm

Cable Dump Panel 2u - Depth = 8cm