Lande Cabinets

Lande PROline Wall Mount Cabinet Range

• Available in heights of 7U, 9U, 12U, 16U & 20U and width of 600mm
• 450mm and 600mm depth options
• High quality design with a rigid structure
• As standard with lockable glass front door and side panels
• Top cover with ventilation slots for option of fan installation
• Top and base have cable entry with rubber edged sliding plate (145 x 70mm)
• Rear panel has a cable gland plate
• Rear panel is used for mounting to the wall
• 19" mounting rails have U height numbering sequence
• 450mm deep supplied with 2x 19" mounting rails
• 600mm deep supplied with 4x 19" mounting rails
• Standard paint finish of Black RAL9005 or Light Grey RAL7035
• Can also be used as a free standing cabinet with option to add castors (823415) or adj feet (823414)

PROline Rear Wall Mounting Sections

• Available in 7U, 9U, 12U, 16U & 20U heights
• All are 150mm deep and 600mm wide
• Heavy duty welded frame construction, 2.0mm thickness
• PVC Cable entry plate in top, base and rear
• Hasp type lock to the main cabinet
• When used with 450mm deep cabinet, the load capacity is 50kg
• When used with 600mm deep cabinet, the load capacity is 35kg

Lande IP65 Outdoor Cabinet Range

• This IP65 Outdoor Cabinet range provides a high quality design, with a welded construction for strength and corrosion protection
• This Cabinet is suitable for using within a wide range of markets to protect your equipment from the elements
• Ideal for housing equipment used in data and networking, telecoms, FTTx Communications, industrial and transportation
• IP65 Protection Level (EN60529), Polyurethane infused sealing system
• NEMA-250 classifications 3,3S,4,4X,5,12,12K,13
• Standard Material (Hot Dip Pre Galv DX51 D+275gr/m, zinc plated)
• Double layer structure
• Insulation material between external and internal layers
• Gland plate supplied with 2x PG21 and 1x PG48 gland and 2x 28mm PVC blind caps
• Spare blank gland plate included
• All enclosures with a hinged canopy roof
• Hidden ventilation louvres to allow hot air discharge through the roof
• Refer to fan system parts 829606 and 829607
• Plinth 200mm high with front and rear access panel
• Polyester outdoor paint Light Grey RAL7035 as standard
• Option for Anti-graffiti and insul-paint, Signal White RAL9003 Polyurethane finish

This Lande range of IP55 Wall Mounting Cabinets are designed for use within industrial applications, warehouses and outdoor areas to provide protection against dust and water ingress, (rain, slush, snow). With the addition of a fan & filter integration, this area of the enclosure provides IP54 protection

• Monoblock welded construction, with polyester type powder coating (RAL7035 Light Grey)
• Sizes range from 7U to 16U, width 600mm and depths of 450mm or 600mm
• 7U & 9U models contain single point turn locking system, 12U & 16U contain 2 single point locking system. The lock systems accommodate a central cylinder lock which unlocks with a cylindrical key
• All models fitted with 1 set of 19" mounting rails
• As standard, the base of the cabinet is equipped with a filtered air inlet
• The base of the cabinet is equipped with 4x PG21 cable entry compatible blind plugs
• Top part is also filtered for passive ventilation and hot air exhaust. As required these filters can be replaced with a thermostat switched single fan
• All models have a roof canopy with gasket for dust and liquid protection
• Wall mounted brackets are included. Note that mounting screws are not, as this is subject to the site mounting area
• A single earth grounding cable between the main body and door is included
• Metal front door with IP55 sealing gasket
• Maximum load capacity is upto 300kg mounted on the wall, or 800kg on the ground
• Accessories include, rear mounting plates, fans plus options for pole mounting and plinths if siting on the ground

Set & Stack from Lande is an innovative range of cost effective and adaptable wall mounting brackets. Available, in 2U, 3U, 4U, 6U, and 8U, they can be stacked and expanded as needed, providing incredible flexibility for the user.

• Adjustable depth
• Can be stacked to provide additional U Height
• Hinged to fold flat for transportation
• Top/bottom cover available on 836122

Lande Soundproof Free Standing Cabinets are a high quality design for applications in office environments to reduce noise of active equipment.

• Available in 17U, 32U and 42U heights, width 750mm, depth 1130mm
• High density sound emitting material for the doors, panels and inner skins
• Thermostatically controlled low noise fans in rear door
• Noise reduction performance up to 30dB
• 19" adjustable mounting rails with U height numbering
• Vertical cable management panels and brushed cable entry passage in front, with aluminium rings
• Base cable entry, sliding panel with gasket
• Heavy duty castors and adjustable feet
• Rigid frame construction providing load rating up to 1000kg
• High quality melamine coated chipboard, 18mm thickness on the doors, 30mm on the top cover
• Available in Black RAL9005 as standard