SafeCount Vector 4D Master and Node Sensors

Accurate and Anonymous Person Detection
The Irisys Vector 4D is the most advanced people counter in the world with unrivaled count accuracy. Vector 4D collects reliable and anonymous data following preset occupancy limits to provide real time updates for multiple entances and exits on whether access is permitted or restricted. This allows for effortless adherence to ever changing occupancy regulations and restrictions.



500,000 Sensors Worldwide >99% Sensor Accuracy   24 Years Experience Easy & Fast Installation  
Impressive features such as passive staff detection, dwell time measuring and the ability to connect multiple units to cover wide openings enable this IoT device to help smart businesses go beyond people counting and optimise the customer experience.
And it does all this anonymously, protecting customer and staff privacy!

Key Features
Real time occupancy monitoring solution


Staff detection utilising special lanyards allow for persons to be exempt from counting


Notifications for meeting and exceeding occupancy limits

Visual alerts utilising linked traffic light or display accessories
Occupancy levels are fully customisable



Ability to monitor single or multiple entrances and exits


Sensor counting is kept anonymous ensuring privacy for everybody


Over 99% accuracy of counting even with people in close proximity of each other


Counting ability stays accurate regardless of light levels or other environmental conditions


Sensors operate in their own standalone system and does not require an internet connection


Scalable functionality using SafeCount Plus can provide occupancy reports across multiple installations.






Where can SafeCount be used?

SafeCount can be used monitor occupancy of entire buildings, individual rooms or anything inbetween. Example use cases are:

Retail stores, shopping malls and supermarkets | Restaurants, hospitality and leisure facilities

 Higher education | Corporate workplaces | Washrooms

SafeCount can also cover wide areas multiple entrances and exits utilising extra nodes, essential in such situations as one way access 


Sensor Features



Staff detection

Improve the accuracy and reliability of your data.

Remove staff movements from counts or exclusively count staff with passive detection.

No need for any additional hardware or complicated setup, all employees need to do is wear a special lanyard.

Anonymity and accuracy

Privacy of customers and staff protection is kept as neither are personally identifiable while maintaining a high level of accuracy.

We use AI and deep learning to accurately track people and only people - no matter how closely they walk together or object they may be carrying.  

Dwell

Measure the length of time people spend in defined areas. Useful to measure effectiveness of displays.

Dwell zones can be any size or shape and can go across multiple units. Dwell time is measured and recorded for each individual that enters the zone.

Works in darkness

Unaffected by darkness, bright sunshine, reflective surfaces or patterned carpets

The Vector 4D uses the light from its infrared LEDs to illuminate the area and track people. As infrared light is invisible to humans, it is completely unnoticeable.   

Multi unit

Seamlessly connect multiple units together to cover large areas and wide openings

'Master and node’ configuration of devices allows wide entrances and seamless coverage of large areas with no additional hardware. Up to 32 devices can be connected, enabling entire stores to be covered!

Tilt and auto correction

Struggling to find a flat bit of ceiling to install a people counter on?

Struggle no more with tilt and auto correction functionality built in to Vector 4D. Tilting a device not only moves the field of view, but also increases its size.   Cover Multiple Entry and Exits with Nodes

'Master and node’ configuration of devices allows wide entrances and seamless coverage of large areas with no additional hardware. Up to 32 devices can be connected, enabling entire stores to be covered!

Clever AI algorithms ensure that people are not lost or double counted when they move between different devices fields of view.

Up to 32 count lines and zones can be added to a multi unit configuration, and these can go across just one or as many device fields of view as required.

 

People Counting Applications
SafeCount can help businesses and organisations ensure customers, visitors and employees have the space they need.  Suitable for buildings of all sizes, even those with multiple entrances and exits, a SafeCount solution delivers live occupancy data with visual warnings and alerts when limits are approached or exceeded.

SafeCount works independently of existing IT networks and is designed for simple setup and fast installation.





Retail Stores

With competition from traditional bricks-and-mortar retailers, online stores and everything in between, today's retail stores need to make the most of every customer that comes through their doors.

Without a clear idea of shopper behaviour and store conversion rates, management are forced to make business decisions that don't take into account key facts about their customers.

Accurately measuring footfall and using this to generate detailed retail analytics is at the core of what we do.   Supermarkets

Irisys have worked with big brand supermarkets all over the world, and our experience has shown time and time again that knowing more about your customers; how they shop, when they shop, and how they move through your stores, gives you a chance to improve levels of customer service to exceed expectations and encourage repeat visits.

Accurately measuring footfall and using this to generate detailed retail analytics and power supermarket queue management systems is at the core of what we do.   Shopping Malls

Managing the complex patterns of footfall and sheer number of visitors in public areas such as shopping malls is challenging. This is why Irisys' highly accurate people counting sensors are a must have to ensure your customer experience stands out from the competition.

People counters can also be used to understand shopper movements and identify areas of pain such as crowded or congested walkways, thus improving visitor satisfaction. Also, by understanding visitor footfall and areas of high/low traffic, realistic rents for retailers can be set.   Museums & Galleries

Museums, galleries and other public institutions need to be able to accurately measure their footfall as government grants and charitable donations, on which they often rely, are tied to visitor numbers.

Without evidence provided by people counting solutions, rough estimates of visitors might be the only evidence you have to secure appropriate levels of funds, and you risk seriously underestimating your own popularity.

People counting solutions offer an objective source of reliable data that you can use to study the attraction of your institution.   Train Stations & Airports

Airports, train stations and other transport hubs are some of the busiest places in the modern world, so you need the best and most accurate technology available in order to operate effectively.

Data from Irisys' advanced people counting sensors give transport hub operators a powerful tool for daily management, future planning and making sure everything runs as efficiently as possible whilst providing a high level of customer satisfaction for travellers.   Outdoor & City Centres
Many locations, from parks to city centres, have needs for outdoor people counters - and thanks to Irisys' range of rugged outdoor people counting devices, this can be achieved just as easily as indoor locations.

Towns and cities all over the world have to compete with their neighbours to attract shoppers and investment, so having an accurate measure of footfall is one of the only ways you can measure how well you are doing.

 

Accurate and Anonymous Person Detection
The Irisys Vector 4D is the most advanced people counter in the world with unrivaled count accuracy. Vector 4D collects reliable and anonymous data following preset occupancy limits to provide real time updates for multiple entances and exits on whether access is permitted or restricted. This allows for effortless adherence to ever changing occupancy regulations and restrictions.



500,000 Sensors Worldwide >99% Sensor Accuracy   24 Years Experience Easy & Fast Installation  
Impressive features such as passive staff detection, dwell time measuring and the ability to connect multiple units to cover wide openings enable this IoT device to help smart businesses go beyond people counting and optimise the customer experience.
And it does all this anonymously, protecting customer and staff privacy!

Key Features
Real time occupancy monitoring solution


Staff detection utilising special lanyards allow for persons to be exempt from counting


Notifications for meeting and exceeding occupancy limits

Visual alerts utilising linked traffic light or display accessories
Occupancy levels are fully customisable



Ability to monitor single or multiple entrances and exits


Sensor counting is kept anonymous ensuring privacy for everybody


Over 99% accuracy of counting even with people in close proximity of each other


Counting ability stays accurate regardless of light levels or other environmental conditions


Sensors operate in their own standalone system and does not require an internet connection


Scalable functionality using SafeCount Plus can provide occupancy reports across multiple installations.




Nodes Increase Detection Span for Master Sensors

'Master and node’ configuration of devices allows wide entrances and seamless coverage of large areas with no additional hardware. Up to 32 devices can be connected, enabling entire stores to be covered!

Clever AI algorithms ensure that people are not lost or double counted when they move between different devices fields of view.

Up to 32 count lines and zones can be added to a multi unit configuration, and these can go across just one or as many device fields of view as required.

 


Where can SafeCount be used?

SafeCount can be used monitor occupancy of entire buildings, individual rooms or anything inbetween. Example use cases are:

Retail stores, shopping malls and supermarkets | Restaurants, hospitality and leisure facilities

 Higher education | Corporate workplaces | Washrooms

SafeCount can also cover wide areas multiple entrances and exits utilising extra nodes, essential in such situations as one way access 


Sensor Features



Staff detection

Improve the accuracy and reliability of your data.

Remove staff movements from counts or exclusively count staff with passive detection.

No need for any additional hardware or complicated setup, all employees need to do is wear a special lanyard.

Anonymity and accuracy

Privacy of customers and staff protection is kept as neither are personally identifiable while maintaining a high level of accuracy.

We use AI and deep learning to accurately track people and only people - no matter how closely they walk together or object they may be carrying.  

Dwell

Measure the length of time people spend in defined areas. Useful to measure effectiveness of displays.

Dwell zones can be any size or shape and can go across multiple units. Dwell time is measured and recorded for each individual that enters the zone.

Works in darkness

Unaffected by darkness, bright sunshine, reflective surfaces or patterned carpets

The Vector 4D uses the light from its infrared LEDs to illuminate the area and track people. As infrared light is invisible to humans, it is completely unnoticeable.   

Multi unit

Seamlessly connect multiple units together to cover large areas and wide openings

'Master and node’ configuration of devices allows wide entrances and seamless coverage of large areas with no additional hardware. Up to 32 devices can be connected, enabling entire stores to be covered!

Tilt and auto correction

Struggling to find a flat bit of ceiling to install a people counter on?

Struggle no more with tilt and auto correction functionality built in to Vector 4D. Tilting a device not only moves the field of view, but also increases its size.  
People Counting Applications
SafeCount can help businesses and organisations ensure customers, visitors and employees have the space they need.  Suitable for buildings of all sizes, even those with multiple entrances and exits, a SafeCount solution delivers live occupancy data with visual warnings and alerts when limits are approached or exceeded.

SafeCount works independently of existing IT networks and is designed for simple setup and fast installation.





Retail Stores

With competition from traditional bricks-and-mortar retailers, online stores and everything in between, today's retail stores need to make the most of every customer that comes through their doors.

Without a clear idea of shopper behaviour and store conversion rates, management are forced to make business decisions that don't take into account key facts about their customers.

Accurately measuring footfall and using this to generate detailed retail analytics is at the core of what we do.   Supermarkets

Irisys have worked with big brand supermarkets all over the world, and our experience has shown time and time again that knowing more about your customers; how they shop, when they shop, and how they move through your stores, gives you a chance to improve levels of customer service to exceed expectations and encourage repeat visits.

Accurately measuring footfall and using this to generate detailed retail analytics and power supermarket queue management systems is at the core of what we do.   Shopping Malls

Managing the complex patterns of footfall and sheer number of visitors in public areas such as shopping malls is challenging. This is why Irisys' highly accurate people counting sensors are a must have to ensure your customer experience stands out from the competition.

People counters can also be used to understand shopper movements and identify areas of pain such as crowded or congested walkways, thus improving visitor satisfaction. Also, by understanding visitor footfall and areas of high/low traffic, realistic rents for retailers can be set.   Museums & Galleries

Museums, galleries and other public institutions need to be able to accurately measure their footfall as government grants and charitable donations, on which they often rely, are tied to visitor numbers.

Without evidence provided by people counting solutions, rough estimates of visitors might be the only evidence you have to secure appropriate levels of funds, and you risk seriously underestimating your own popularity.

People counting solutions offer an objective source of reliable data that you can use to study the attraction of your institution.   Train Stations & Airports

Airports, train stations and other transport hubs are some of the busiest places in the modern world, so you need the best and most accurate technology available in order to operate effectively.

Data from Irisys' advanced people counting sensors give transport hub operators a powerful tool for daily management, future planning and making sure everything runs as efficiently as possible whilst providing a high level of customer satisfaction for travellers.   Outdoor & City Centres
Many locations, from parks to city centres, have needs for outdoor people counters - and thanks to Irisys' range of rugged outdoor people counting devices, this can be achieved just as easily as indoor locations.

Towns and cities all over the world have to compete with their neighbours to attract shoppers and investment, so having an accurate measure of footfall is one of the only ways you can measure how well you are doing.