Aruba Indoor Access Points

The Aruba 530 Series Campus Access Points with IEEE 802.11ax technology are designed to deliver extreme-performance access for mobile and IoT devices in environments where device density is very high. The Aruba 530 Series uses 802.11ax features to efficiently and simultaneously serve multiple clients and traffic types in dense environments, increasing data rates for both individual device and overall system.

The 530 Series supports maximum data rates of 2.4Gbps in the 5GHz band and 1,150Mbps in the 2.4GHz band (for an aggregate peak data rate of 3.55Gbps). Each AP supports up to 1024 associated client devices per radio, making the high-end 802.11ax 530 Series APs ideal for high density environments, such as higher education, K12, retail, hotels and digital workplaces.

AI-powered features for wireless RF and client connectivity optimization.

Dual-radio (dual 4x4 MIMO) 802.11ax AP with up-and downlink OFDMA and Multi-User MIMO (MU-MIMO).

Supports all mandatory and several optional 802.11ax features, and up to the full 37 OFDMA Resource Units (RUs).

Maximum data rates of 2.4Gbps in the 5GHz band and 1,150Mbps in the 2.4GHz band (for an aggregate peak data rate of 3.55Gbps).

Up to 1,024 associated client devices per radio.

Ideal for high-density environments, such as higher education,K12, retail branches, hotels and digital workplaces.

Unsurpassed Performance

The Aruba 530 Series Campus Access Points with 802.11ax technology efficiently and simultaneously serves multiple clients, increasing data rates for both individual devices and as an overall system.

Multi-user transmission with downlink and uplink Orthogonal Frequency Division Multiple Access (OFDMA) increases user data rates and reduces latency, especially for large numbers of devices with short frames or low data-rate requirements, such as voice and IoT devices.

Multi-user capability with downlink multi-user MIMO improves network capacity by allowing multiple devices to transmit simultaneously.

The Aruba ClientMatch technology will automatically attempt to group 802.11ax capable devices onto available AP radios with equivalent capabilities, so that the performance benefits of OFDMA are maximized. This means increased network performance and a boost in network capacity.

Smart Power Management

The Aruba 530 Series Campus Access Points includes Aruba Intelligent Power Monitoring (IPM) which allows for a gradual upgrade of switching by allowing the APs to operate if there is not enough Power over Ethernet ( PoE) power.

This feature enables the AP to continuously monitor and report its actual power consumption and optionally make autonomous decisions to disable certain capabilities based on the amount of power available to the unit.

As higher-performance 802.11ax access points drive more power consumption, the Aruba NetInsight Green AP feature allows the 530 series access points to draw less power when it’s not being used, such as evenings when the buildings are empty.

IoT and Location Ready

The Aruba 530 Series Campus Access Points provides unique benefits for IoT devices from dedicated channels in OFDMA allowing for simultaneous transmission of IoT connections with low latency, to power saving options with Target Wake Time (TWT) to saves battery life.

The 530 series supports an integrated Bluetooth Low-Energy (BLE) and Zigbee radio, as well as a USB port for increased flexibility, providing better security and reliable connectivity for IoT devices and for implementing location services.

The HPE Aruba Networking 500 Series Campus Access Points provide high-performance connectivity to budget-conscious organizations experiencing growing numbers of mobile, IoT and mobility requirements. Supporting the latest Wi-Fi 6 standard, the HPE Aruba Networking 500 Series can achieve a maximum aggregate data rate of 1.77 Gbps (1.774 Gbps) for venues and workplaces such as schools, midsize offices, and retailers.

The HPE Aruba Networking 500 Series Campus Access Points are also designed to provide improved user experiences by integrating key Wi-Fi optimization technologies for increased Wi-Fi efficiency and optimized client airtime.

Wi-Fi 6 for high performance and efficiency.

Provides policy enforcement for wireless traffic through Dynamic Segmentation.

IoT-ready with a built-in Bluetooth 5 and 802.15.4 radio that supports Zigbee®.

Supports up to 256 associated clients per radio.

Can be deployed as a cloud-managed Instant AP or controller-based AP.

Incredible Efficiency with Wi-Fi 6

The HPE Aruba Networking 500 Series Campus Access Points support the Wi-Fi 6 standard, including features such as orthogonal frequency-division multiple access (OFDMA), bi-directional Multi-User MIMO (MU-MIMO), and Target Wait Time (TWT).

Patented RF optimization technologies like ClientMatch have also been enhanced with Wi-Fi 6 awareness to group Wi-Fi 6-capable client devices together for optimized network utilization.

The HPE Aruba Networking 500 Series Campus Access Points also supports AirSlice, a unique capability that enhances OFDMA with SLA-grade application assurance from the access point to the client device.

Infrastructure Designed with Flexibility in Mind

The HPE Aruba Networking 500 Series Campus Access Points can be deployed in either controller-less or controller-based mode, depending on enterprise requirements.

This product can be managed locally, in the cloud with Aruba Central, or through a converged multivendor on-premises solution with Aruba AirWave.

It also comes with Intelligent Power Monitoring to enable or disable AP features based on available PoE power from a network switch.

IoT Platform Capabilities

The HPE Aruba Networking 500 Series Campus Access Points have the ability to support up to 256 associated clients per Wi-Fi radio – ideal for organizations deploying Wi-Fi connected IoT devices.

Supports Bluetooth 5 and Zigbee® wireless protocols through an integrated IoT radio, and third-party expansion with an integrated USB port.

Features improved client visibility with integrated device profiling, and the option for advanced insights when integrated with ClearPass Policy Manager or ClearPass Device Insight.

Low-cost 802.11ac Wave 2 enterprise Access Point

The affordable mid-range Aruba 303 Series campus access point delivers high performance 802.11ac with MU-MIMO (Wave 2) for medium density enterprise environments. With the integrated BLE and supporting 802.3af power, the Aruba 303 Series AP enables enterprises to improve their work efficiency and productivity with the lowest TCO

The compact Aruba 303 Series AP delivers a maximum concurrent data rate of 867 Mbps in the 5GHz band and  300 Mbps in the 2.4GHz band (for an aggregate peak data rate of 1.2Gbps). Featuring 2x2:2SS, the Aruba 303 is designed for medium device density environments, such as schools, retail branches, warehouses, hotels and enterprise offices, where the environment is cost sensitive.

Features:

Unified AP - deploy with or without controller

Dual Radio 2x2 802.11ac access point with Multi-User MIMO (wave 2) 
Supports up to 867Mbps in the 5GHz band (with 2SS/VHT80 client devices) and up to 300Mbps in the 2.4GHz band (with 2SS/HT40 clients)
Mounts on ceiling or wall
Built-in Bluetooth Low-Energy (BLE) radio
Advanced cellular coexistence (ACC)
Quality of Service for unified communication applications
Built-in Bluetooth Low-Energy (BLE) radio The 303 Series AP has an integrated Bluetooth Low-Energy (BLE) radio, which can be used as an Aruba beacon for advanced locationing, indoor wayfinding, asset tracking, and to enable proximity-based push notification services. The integrated beacon radio also enables the remote management of battery-powered and other standalone beacons in a large-scale network of Aruba beacons. It enables businesses to leverage mobility context to develop applications that will deliver an enhanced user experience and increase the value of the wireless network for organisations.


Advanced cellular coexistence (ACC) ACC lets WLANs perform at peak efficiency by minimizing interference from 3G/4G LTE networks, distributed antenna systems and commercial small cell/fem-to-cell equipment.


Quality of Service for unified communication apps The APs support priority handling and policy enforcement for unified communication apps with encrypted videoconferencing, voice, chat and desktop sharing.



Management the way you want it. When it comes to Wi-Fi management, Aruba give you the flexibility to choose. You can use an Instant access point or a controller to manage an entire cluster of access points. Or you can manage them with a cloud-based or an on-site network management platform. 


Aruba Instant Wi-Fi – fast, reliable, and affordable. There’s no easier way to get enterprise-grade Wi-Fi up and running. Aruba Instant delivers the only controllerless Wi-Fi solution that is easy to set-up, and loaded with security and smarts needed to accelerate your business without breaking your budget.



Accelerate your business with the mobile-first digital workplace.

The nature of work is changing. Collaborative environments, a mobile workforce, and the possibility of smarter spaces. Harness new technology – ultra-fast Wi-Fi, the Internet of Things, and mobile UC — to move your business, and the people in it, faster than ever before.









Simple, yet powerful. Aruba Instant comes with automatic RF management that ensures the strongest Wi-Fi connection for all mobile devices. And granular visibility into mobile apps prioritises business-critical data, and keeps out the malicious content. 

 







Create smarter, more efficient spaces with IoT.

 BYOD changed the playing field and allowed the workplace to go mobile. Now IoT is taking things up a notch by creating smarter, more efficient work spaces — intelligent meeting rooms, location services, and real time monitoring. Aruba was there to solve your BYOD challenges and are ready for IoT. Are you?






360° of protection from the edge to the core to the cloud.

 Mobility, cloud and IoT require a different design approach to connecting and securing the enterprise network – and Aruba’s 360 Secure Fabric delivers three key security innovations: a secure, trusted network infrastructure, continuous monitoring and advanced attack detection, and analytics-driven, closed-loop policy-based attack response. . 







Rethink your workspace design to embrace a mobile-first strategy.

As you move to the digital workplace, it’s critical to get your IT infrastructure ready. To meet the challenges, Aruba offers an integrated wired and wireless portfolio, with industry-leading advances in network management, security and analytics. 



Access Point Comparison Chart 

Instant AP Instant 207Instant 303Instant 305Instant 315Instant 325 Ships with AOS image Ships with Instant image Number of radios 2 Supported bands Dual concurrent Wi-Fi standards 802.11 a/b/g/n/ac Radio MIMO type 2x2:2 2x2:2 3x3:3 (5GHz)
2x2:2 (2.4GHz) 4x4:4 (5GHz)
2x2:2 (2.4GHz) 4x4:4 (5GHz)
4x4:4 (2.4GHz) MU-MIMO support (5GHz)  N/A 2x2:2 3x3:2 4x4:4 4x4:3 Max n.o of BSSIDs (per radio) 16 Max n.o of associated clients per radio 256 Max transmit power (per radio chain, MCS0) 2.4 GHz/5 GHz 18 dBm (conducted) per chain
18 dBm (conducted) per chain 18 dBm
18 dBm Integrated antennas 2x omni-directional downtilt dual band 2x omni-directional downtilt dual band 3x omni-directional downtilt dual band 4x omni-directional downtilt dual band 8x omni-directional downtilt single band TPM module Network interfaces 1 x GE 2 x GE Jumbo frame support on uplink USB host interface     Console port Proprietary; optional adapter cable available  RJ-45 PoE PD Power 802.3af/at PoE PSE           DC power support 12V Ships with AC-to-DC adapter           Temperature range 0° C to +40° C 0° C to +50° C Enclosure type Plastic/metal Weight (unit only, with desk mount) 380g 350g 460g 650g 950g Plenum rated TAA/FIPS Version available   Lifetime Warranty Minimum software version ArubaOS 6.5.1.0
Aruba InstantOS 4.3.1.0 ArubaOS and Aruba InstantOS 8.3.0.0 ArubaOS™ 6.5.1.0
Aruba InstantOS™ 4.3.1.0 ArubaOS™ 6.5.0.0
Aruba InstantOS™ 4.3.0.0  ArubaOS 6.4.4.0
InstantOS 4.2.1.0 Spectrum analysis support   Maximum power consumption (excluding USB, PoE PSE) 12.3W (PoE)
10.1W(DC) 10.6W (PoE) 
9.1W (DC) 13W (PoE)
11W(DC) 14.4W (PoE+) 
13.6W (PoE)
12.7w(DC) 20W (PoE)
18.5W (DC) Max IPsec encrypted wired throughput (RAP mode) 20 100 20 100 100

Aruba Instant On AP22

AP22 is a Wi-Fi CERTIFIED 6™ (Wi-Fi 6) access point that brings higher capacity, efficiency, and performance to small businesses with dense deployments. With a maximum aggregate data rate of 1.7 Gbps, AP22 access points deliver the speed and reliability small businesses need.

Main Features

Fast 802.11ax, 2X2:2
Wi-Fi Certified 6™ (Wi-Fi 6)
MU-MIMO performance
Smart Mesh Wi-Fi support
Built-in Wi-Fi router/gateway functionality
Integrated Bluetooth
Easy-to-use web and mobile app for setup and management
Secure Guest Wi-Fi with simple setup
Application classification, control and visibility
Perfect For:

Reimagined Offices

Schools

Retail Stores

Hospitality

All the features you need plus those you really want

Wi-Fi CERTIFIED 6™ AP22

Wi-Fi CERTIFIED 6™ program is designed to ensure that Wi-Fi 6-capable devices meet the highest standards for security and interoperability. Wi-Fi 6 certification guarantees high-speed and advanced features like orthogonal frequency division multiple access (OFDMA), downlink multi-user multiple-input multiple-output (MU-MIMO) technology, and the next generation of Wi-Fi security, WPA3.

High performance, high speed

The Wi-Fi CERTIFIED 6 AP22 delivers faster Wi-Fi speeds, greater capacity, and reduced latency between access points and devices for a superior Wi-Fi experience in dense deployments of up to 75 max active devices. With a maximum aggregate data rate of more than 1.7 Gbps, the AP22 delivers the speed and reliability small businesses need.

Backward compliant

The AP22 is compatible with all your legacy wireless devices - 802.11b/g/n/ac - so you won't have to replace your smartphones and tablets.

25% data increase

1024-quadrature amplitude modulation (1024-QAM) enables a 25% data increase over 256 QAM, improving throughput to ensure high quality of service (QoS) for higher-density venues. Additionally, it delivers 4x the capacity of 802.11ac access points to connect more devices simultaneously.

MU-MIMO (Multi-User, Multiple Input, Multiple Output)

With MU-MIMO, access points can support simultaneous directional RF links and up to four simultaneous, full-rate Wi-Fi connections.

TWT (Target Wake Time)

Ideal for devices that communicate infrequently, the AP22 features Target Wake Time (TWT). By establishing a schedule for when clients need to communicate with an access point, it effectively increases device sleep time and significantly conserves battery life, a feature that is particularly important for mobile devices.

OFDMA (Orthogonal Frequency Division Multiple Access)

OFDMA allows access points to handle multiple Wi-Fi 6 capable clients on each channel simultaneously, regardless of device or traffic type - improving efficiency and reducing latency.

ACC (Aruba Advanced Cellular Coexistence)

Using built-in filtering, Aruba Advanced Cellular Coexistence (ACC) maximizes performance by minimizing interference from 3G/4G/LTE networks, Distributed Antenna Systems (DAS), and commercial small cell/femtocell equipment.

This Model Includes:

Two Year Warranty

24/7 Phone and Chat Support

Instant On Community

The Aruba 503 Series Access Points (APs) provide costeffective, high-performance connectivity for any organization experiencing device growth due to increased mobility, the shift to cloud, or IoT. With a maximum real-world aggregate data rate of 1.49 Gbps (HE80/HE20), the 503 Series deliver the speed and reliability needed for medium-density venues and workplaces such as schools, midsize offices, and retailers. Each 503 Series AP provides connectivity for a maximum of 256 associated clients per radio (512 in total). 2.4 GHz: Yes

5 GHz: Yes

USB 2.0 ports quantity: 1

Ethernet LAN (RJ-45) ports: 1

Antenna gain level (max): 4.8 dBi

Maximum data transfer rate: 1490 Mbit/s

The HPE Aruba Networking 650 Series Wi-Fi 6E Access Points are designed to take advantage of the 6 GHz band using three radios for comprehensive tri-band coverage. With 6GHz, wireless capacity is more than doubled–allowing enterprises to meet today’s needs and plan for future growth. HPE Aruba Networking Wi-Fi 6E APs allow countries to take advantage of Wi-Fi 6E once it is approved in country via automated notification and easy deployment of 6 GHz regulatory rules.

The HPE Aruba Networking 650 Series APs delivers a maximum aggregate 7.8 Gbps data rate for higher throughput and faster speeds for fixed, low-power indoor or standard power use. With up to seven 160 MHz channels, these series increases performance for low-latency, bandwidth-hungry applications. The HPE Aruba’s ultra tri-band filtering reduces interference between 5 GHz and 6 GHz and prevents gaps in channel coverage. To provide high availability, these series includes dual port hitless failover for ethernet and power.

Three radios extend the benefits of Wi-Fi 6 to the 6GHz band – with 7.8 Gbps maximum aggregate throughput.

Wider channels and less interference deliver faster speeds to the needs of low-latency, bandwidth hungry applications like high-definition video and augmented reality/virtual reality.

Unique filtering capabilities remove gaps in coverage and reduce interference between the 5GHz and 6GHz bands.

High availability with hitless failover for ethernet and power provide business continuity.

Automated notification and easy deployment of 6 GHz regulatory tables to allow countries to take advantage of Wi-Fi 6E once it is approved in country.

Two hardware variants for 1) internal antennas or 2) connectorized antennas (external) address a wide variety of environments.



More Capacity and Wider Channels with Wi-Fi 6E

HPE Aruba Networking 650 Series Campus Access Points deliver a maximum aggregate 7.8 Gbps data rate for higher throughput and faster speeds

With up to seven 160 MHz channels, the APs increase performance for low-latency, bandwidth-hungry applications.

4x4 MIMO radios to deliver peak performance and increased capacity using MU-MIMO and OFDMA (uplink and downlink for both).

Option to deploy AP-655 (internal antennas) or AP-654 (supports connectorized antennas) to meet range of environments.

Less Interference and Fewer Coverage Gaps

HPE Aruba Networking 650 Series Campus Access Points provide comprehensive tri-band coverage using three radios.

The HPE Aruba Networking unique ultra tri-band filtering removes interference among 5 GHz and 6 GHz radios and prevents gaps in channel coverage.

Since only Wi-Fi 6E enabled devices can operate in the 6 GHz band, it is less congested with no interference from legacy devices.

Extends Capabilities of Wi-Fi 6 (802.11ax) APs

HPE Aruba Networking 650 Series Campus Access Points provide high availability with two HPE Smart Rate ethernet ports configurable to 1, 2.5, or 5 Gbps, offering true hitless failover for both data and power.

Unique HPE Aruba Networking capabilities include ClientMatch, Advanced Cellular Coexistence, and Intelligent Power Monitoring to customize user experience and energy use.

Ensures Business Continuity and High Availability

The HPE Aruba Networking 650 Series Campus Access Points provide high availability with two HPE Smart Rate ethernet ports configurable to 1, 2.5, or 5 Gbps, offering true hitless failover for both data and power.

Cloud, controller, or controllerless operation modes address all campus, branch, and remote use cases.

Explore simple, smarter Wi-Fi to accelerate your small business

Business Wi-Fi made incredibly simple

Check "reliable, secure, fast Wi-Fi" off your to-do list. Set up your network in minutes with our mobile app and enjoy fast speeds inside and outside. Manage your business network from anywhere, easily. Relax knowing your business, employees, and customers are protected by the latest security automatically—at no extra cost to you.


Features

Provides a high performance Dual Radio 802.11ax AP with 4 spatial streams (4X4) for higher capacity and coverage.
This series features maximum data rates of 4.8Gbps in the 5GHz band and 574 Mbps in the 2.4GHz band (for an aggregate peak data rate of 5.3Gbps).
Includes 2.5G Ethernet uplink port and 160 MHz channel bandwidth for increased wireless throughput.
Wi-Fi 6 certification supports all mandatory 802.11ax features that include MU-MIMO, OFDMA, TWT, and more.
Support for WPA2/WPA3 protected employee and guest login with Enhanced Open for per user guest access.
Aruba Instant On mobile app and/or cloud-based web portal allows for easy network management onsite or remotely.
Incredible Efficiency with Wi-Fi 6

The Aruba Instant On App makes your business Wi-Fi incredibly simple. Set up takes a few clicks—no tech experience needed. Monitor and manage your business network anywhere from your phone, and keep tabs on who is connecting to which sites and apps.

Aruba Instant On AP25 Access Points support features Target Wake Time (TWT) that helps establish a schedule when clients need to communicate with an access point – improving efficiency for longer battery life.

The Aruba Instant On AP25 Access Points are 100% backward compatible, allowing businesses to support multiple clients (Wi-Fi 6) and legacy (11a/b/g/n/ac) at the same time.

Higher Performance and Superior Coverage

The Aruba Instant On AP25 Access Points deliver higher capacity, efficiency, and performance to small and growing businesses with device-dense environments.

High-performance Aruba Instant On AP25 Access Points bring powerful 4 spatial streams for superior Wi-Fi coverage.

Performance benefits of Orthogonal Frequency Division Multiple Access (OFDMA) are improved, meaning increased network performance and network capacity.

160 MHz channel bandwidth delivers increased mesh throughput and Wi-Fi speed ideal for high-def video streaming and virtual reality devices.

2.5G Ethernet uplink port enhances wireless connectivity.

Safeguard Sensitive Data with WPA2/WPA3 and Enhanced Open

Aruba Instant On AP25 Access Points come with integrated Wi-Fi Alliance security standard WPA2/WPA3 and Enhanced Open support for protected wireless access.

Aruba Instant On AP25 Access Points feature integrated router, gateway, and firewall functionality.

Aruba Instant On supports Two-Factor Authentication (2FA) for additional layer of authentication, preventing attackers from remotely accessing your networks.

Create up to eight different SSIDs under one network name to keep your data safe, whether surfing the web or checking HR data.

The HPE Aruba Networking 303 Series Campus Access Points delivers an affordable high performance 802.11ac with MU-MIMO (Wave 2) for medium density enterprise environments. With the integrated Bluetooth Low Energy (BLE) and supporting 802.3af power, the HPE Aruba Networking 303 Series APs enables enterprises to improve their work efficiency and productivity with low TCO.

The compact HPE Aruba Networking 303 Series Campus Access Points delivers a maximum concurrent data rate of 867 Mbps in the 5 GHz band and 300 Mbps in the 2.4 GHz band (for an aggregate peak data rate of 1.2 Gbps). Featuring 2x2:2SS, it is designed for device density environments, such as schools, retail branches, warehouses, hotels and enterprise offices, where the environment is cost sensitive.

The AP-303P models allow you to daisy-chain your wired network to connect and power any network device (IP camera, IOT gateway, or a second access point) to the E1 Ethernet port of the AP-303P.

Simplify and cost-reduce the installation of multiple devices by sharing switch ports and cabling.

AP-303P models support Zigbee 802.15.4 radio to provide connectivity for IoT devices.

2:2:2SS SU-MIMO and MU-MIMO operation, channel width up to 80 MHz.

Unified access points supporting HPE ArubaOS and InstantOS modes.

Mid-range performance and density 802.11ac Wave 2 Access Point

The HPE Aruba Networking 303 Series Campus Access Points are cost-optimized for delivering 802.11ac Wave 2 performance in medium density environments.

Designed specifically for moderate performance requirements.

Supports dual-radio operation in 2.4 GHz and 5 GHz bands.

Unified Access Points Supporting HPE ArubaOS and InstantOS Modes

The HPE Aruba Networking 303 Series Campus Access Points deliver architectural flexibility, since they can be deployed either with a controller or in controllerless mode.

Based on the presence of a controller in the network, the HPE Aruba Networking 303 Series Campus Access Points will load the HPE ArubaOS or InstantOS software automatically.

802.11ac Wave 2 With 2x2:24SS, 80MHz, and MU-MIMO

The HPE Aruba Networking 303 Series Campus Access Points support 802.11ac with Wave 2 features including 2x2:2SS and up to 80 MHz channel bandwidth.

Radios support transmissions in Multi-User MIMO (MU-MIMO) and Single-User MIMO (SU-MIMO) operating modes.

Integrated BLE Beacon For Location Services and Asset Tracking

The HPE Aruba Networking 303 Series Campus Access Points have an integrated Bluetooth Low Energy (BLE) beacon to enable Aruba location services such as beacon management, location notifications and navigation.

The integration of a BLE beacon enables businesses to leverage mobile context to develop applications that deliver an enhanced user experience and increase the value of the network infrastructure.

HPE Aruba Networking 630 Series Campus Access Points are designed to take advantage of the 6 GHz band using three radios for comprehensive tri-band coverage. With 6GHz, wireless capacity is more than doubled–allowing enterprises to meet today’s needs and plan for future growth. HPE Aruba Networking Wi-Fi 6E APs allow countries to take advantage of Wi-Fi 6E once it is approved in country via automated notification and easy deployment of 6 GHz regulatory tables.

The HPE Aruba Networking 630 Series delivers a maximum aggregate 3.9 Gbps data rate for higher throughput and faster speeds for fixed low power indoor use. With up to seven 160 MHz channels, the 630 Series maximizes performance for low-latency, bandwidth-hungry applications. The HPE Aruba Networking ultra tri-band filtering eliminates interference between 5 GHz and 6 GHz and prevents gaps in channel coverage. To ensure high availability, the 630 Series includes dual port hitless failover for ethernet and power.

Three radios to extend the benefits of Wi-Fi 6 to the 6GHz band –unlocking up to 1200 MHz of spectrum.

Wider channels and less interference to deliver faster speeds for ow-latency, bandwidth hungry applications like high-definition video and augmented reality/virtual reality.

Unique filtering capabilities to eliminate gaps in coverage and minimize interference between the 5GHz and 6GHz bands.

High availabilty with hitless failover for ethernet and power to ensure business continuity.

Automated notification and easy deployment of 6 GHz regulatory tables to allow countries to take advantage of Wi-Fi 6E once it is approved in country.

More Capacity and Wider Channels with Wi-Fi 6E

The HPE Aruba Networking 630 Series Campus Access Points deliver a maximum aggregate 3.9 Gbps data rate for higher throughput and faster speeds.

With up to seven 160 MHz channels, the APs maximize performance for low-latency, bandwidth-hungry applications.

Designed for Low Power Indoor environments (LPI).

Less Interference and Fewer Coverage Gaps

The HPE Aruba Networking 630 Series Campus Access Points provide comprehensive tri-band coverage using three radios.

The HPE Aruba Networking unique ultra tri-band filtering eliminates interference among 5 GHz and 6 GHz radios and prevents gaps in channel coverage.

Since only Wi-Fi 6E enabled devices can operate in the 6 GHz band, it is less congested with no interference from legacy devices.

Extends Capabilities of Wi-Fi 6 (802.11ax) APs

HPE Aruba Networking 630 Series Campus Access Points are based on the 802.11ax standard so multi-user efficiency and security features are applied to Wi-Fi 6E.

Unique HPE Aruba capabilities include ClientMatch, Advanced Cellular Coexistence, and Intelligent Power Monitoring optimize user experience and energy use.

Ensures Business Continuity and High Availability

High availability with two HPE Smart Rate ethernet ports for 1-2.5 Gbps to offer true hitless failover for both data and power.

Cloud, controller, or controllerless operation modes address all campus, branch and remote use cases.

HPE Aruba Networking 610 Series Campus Access Points are designed to take advantage of the 6 GHz band and achieve a combined maximum 3.6 Gbps data rate for higher throughput and faster speeds indoors. Adding support for the 6 GHz band increases capacity by up to 1200 MHz1 with more 80/160 MHz channels to support growing demands due to bandwidth-hungry video, growth in client and IoT devices, and expanded use of the cloud.

The compact and cost-effective Aruba 610 Series features dual software-programable radios that can be tuned to any two of the three Wi-Fi 6E bands: 2.4 GHz, 5 GHz, and 6 GHz. Full tri-band coverage is available in a multi-AP deployment. Built-in GPS receivers and fine time measurement enable the HPE Aruba Networking 610 Series Campus Access Points to automatically locate themselves and serve as reference points for accurate indoor location measurements.

Unlock the 6 GHz band to deliver up to 1200 MHz additional capacity and up to 3.6 Gbps combined peak datarate.

Up to seven 160 MHz channels in 6 GHz support low-latency, bandwidth-hungry applications like high-definition video and augmented reality/virtual reality applications.

Software programmable, dual-radio operating modes deliver cost-effective coverage across any two of the three Wi-Fi 6E bands: 2.4 GHz, 5 GHz, 6 GHz with full tri-band coverage in multi-AP deployments.

Low power consumption enables unrestricted operation from an 802.3af (class 3) POE source2.

Built-in GPS receivers and fine time measurement allow APs to automatically locate themselves and serve as reference points for accurate indoor location measurements.





More Capacity and Wider Channels with Wi-Fi 6E

HPE Aruba Networking 610 Series Campus Access Points with dual radios deliver a maximum combined 3.6 Gbps data rate for higher throughput and faster speeds.

With up to seven 160 MHz channels, the APs increase performance for low-latency, bandwidth-hungry applications.

Designed for Low Power Indoor environments (LPI).

Cost-effective and Compact 6 GHz Coverage

HPE Aruba Networking 610 Series Campus Access Points equip enterprises with 6 GHz coverage providing up to 1200 MHz additional capacity at an attractive price point.

Software-programable radios can be configured to cover any two of the three Wi-Fi 6E bands: 2.4 GHz, 5 GHz, 6 GHz.

Low power (802.3af class 3) and compact form factor for ease of deployment.

Extends Capabilities of Wi-Fi 6 (802.11ax) APs

HPE Aruba Networking 610 Series Campus Access Points are based on the 802.11ax standard so multi-user efficiency and security features are applied to Wi-Fi 6E.

Unique HPE Aruba Networking capabilities include ClientMatch, Advanced Cellular Coexistence, and Intelligent Power Monitoring to customize user experience and energy use.

Indoor location-aware APs

HPE Aruba Networking 610 Series Campus Access Points include built-in GPS receivers and fine time measurement to automatically and accurately locate themselves.

HPE Aruba Networking 610 Series supports Open Locate, an emerging standard that allows APs to share their location over the air and through cloud-based APIs.

The HPE Aruba R2H28A is a Secure Wi-Fi 6 (802.11ax) access point for indoor environments such as mid-sized offices, schools, or retail spaces where fewer people are on the network at the same time.

Specifications

1.49 Gbps Maximum Speed
WPA3 and Enhanced Open security
Built-in technology that resolves sticky client issues for Wi-Fi 6 and Wi-Fi 5 Devices
OFDMA For enhanced multi-user efficiency
IoT-ready Bluetooth 5 and Zigbee support
*For complete specifications look under the documentation tab above

Overview

Aruba 500 Series Access Points Overview

The Aruba 500 series access points, equipped with Wi-Fi 6 (802.11ax) technology and Aruba’s intelligent software innovations, deliver high-performance connectivity for mobile and IoT devices in any environment.

High Performance in Dense Environments

The 500 series is designed to simultaneously serve multiple clients and traffic types in dense environments, boosting overall network performance by up to 400% compared to 802.11ac APs.

Differentiated Capabilities

The 500 Series provides differentiated capabilities, including AI-powered RF optimization, Live upgrades, WPA3, and Enhanced Open certified security. Additionally, it offers unified wired and wireless policy with Dynamic Segmentation.

AI-Powered RF Optimization

The access points feature AI-powered RF optimization, leveraging artificial intelligence to enhance radio frequency performance for improved wireless connectivity.

Live Upgrades

The capability for live upgrades allows firmware or software updates to be applied without disrupting the network's operation, ensuring seamless maintenance and improvements.

WPA3 and Enhanced Open Security

The 500 Series ensures enhanced security with support for WPA3 (Wi-Fi Protected Access 3) and Enhanced Open certification, providing a high level of security for wireless communication.

Unified Wired and Wireless Policy with Dynamic Segmentation

These access points offer unified policies for both wired and wireless connections, incorporating dynamic segmentation to efficiently manage network resources.

Green AP Energy Savings

Aruba's AI/ML capabilities enable Green AP energy savings, optimizing power consumption based on the network's usage patterns.

The HPE Aruba Q9H62A is a Mid-range Wi-Fi 6 (802.11ax) Access Point for campus deployments.

Specifications

2.69 Gbps Maximum Speed
WPA3 and Enhanced Open security
Built-in technology that resolves sticky client issues for Wi-Fi 6 and Wi-Fi 5 Devices
OFDMA For enhanced multi-user efficiency
IoT-ready Bluetooth 5 and Zigbee support
Embedded ranging technology for accurate indoor location measurements
*For complete specifications look under the documentation tab above

Overview

Fast and Reliable Connectivity with Aruba 510 Series

Explore the high-performance features of Aruba 510 series access points, designed for seamless connectivity in various environments.

Improved Network Performance in Crowded Spaces

Learn how the 510 series boosts network performance by up to 4X in dense environments, catering to multiple clients and traffic types simultaneously.

Smart Features of Aruba 530 Series

Discover the additional benefits of the 530 Series, including AI-powered RF optimization, always-on connectivity, WPA3 security, and unified wired/wireless policies.

Green AP Mode: Efficient and Eco-Friendly Connectivity

Uncover the energy-saving capabilities of Green AP mode in 802.11ax access points, reducing energy consumption by up to 70%.

The HPE Aruba Q9H57A is a Mid-range Wi-Fi 6 (802.11ax) Access Point for campus deployments.

Specifications

2.69 Gbps Maximum Speed
WPA3 and Enhanced Open security
Built-in technology that resolves sticky client issues for Wi-Fi 6 and Wi-Fi 5 Devices
OFDMA For enhanced multi-uer efficiency
IoT-ready Bluetooth 5 and Zigbee support
Embedded ranging technology for accurate indoor location measurements
*For complete specifications look under the documentation tab above

Overview

Fast and Reliable Connectivity with Aruba 510 Series

Explore the high-performance features of Aruba 510 series access points, designed for seamless connectivity in various environments.

Improved Network Performance in Crowded Spaces

Learn how the 510 series boosts network performance by up to 4X in dense environments, catering to multiple clients and traffic types simultaneously.

Smart Features of Aruba 530 Series

Discover the additional benefits of the 530 Series, including AI-powered RF optimization, always-on connectivity, WPA3 security, and unified wired/wireless policies.

Green AP Mode: Efficient and Eco-Friendly Connectivity

Uncover the energy-saving capabilities of Green AP mode in 802.11ax access points, reducing energy consumption by up to 70%.

Bringing a switch-like experience to 802.11ac

Multifunctional 320 series wireless APs provide the best 802.11ac Wi-Fi connectivity and user experience. Featuring Aruba enhanced ClientMatch and Aruba Beacon technologies, the 320 series enables the highest capacity, performance, and efficiency in extremely highdensity environments.

With a maximum concurrent data rate of 1,733 Mbps in the 5 GHz band and 600 Mbps in the 2.4 GHz band (aggregated date rate of 2.3 Gbps), 320 Series Access Points deliver bestin-class next-generation Wi-Fi infrastructure for the highest density environments.

The high performance and high density 802.11ac 320 series supports multi-user MIMO (MU-MIMO) and 4 spatial Access Point streams (4SS). It provides simultaneous data transmission to multiple devices, maximizing data throughput and improving network efficiency.

Features: Dual Radio 802.11ac Access Point with Multi-User MIMO
5 GHz (1,733 Mbps max rate) and 2.4 GHz (600 Mbps max rate) radios, each with 4x4 MIMO support and a total of eight integrated omni-directional downtilt antennas.
Includes a second 1GigE port that provides network and power redundancy to enhance the network reliability while also boosting uplink performance with link aggregation.
Can be managed by a Mobility Controller or deployed in controllerless Aruba Instant mode.
Mounts on ceiling or wall
Unique Benefits

Dual radio 4x4 802.11ac access point with multi-user MIMO
-Supports up to 1,733 Mbps in the 5 GHz band (with 4SS/VHT80 clients) and 600 Mbps in the 2.4 GHz band (with 4SS/HT40 clients)


Built-in Bluetooth Low-Energy (BLE) radio
-Enables location-based services with BLE-enabled mobile devices receiving signals from multiple Aruba Beacons at the same time.
-Enables management of your deployment of battery powered Aruba Beacons
Quality of service for Unified Communication apps
- Supports priority handling and policy enforcement for unified communication apps, including Microsoft Skype for Business with encrypted videoconferencing, voice, chat and desktop sharing.
RF Management
- Adaptive Radio Management (ARM) technology automatically assigns channel and power settings, provides airtime fairness, and ensures that APs stay clear of all sources of RF interference to deliver reliable, high-performance WLANs.
Threat Protection and Security  
- The Aruba 320 Series Access Points feature integrated wireless intrusion protection offers threat protection and mitigation, and eliminates the need for separate RF sensors and security appliances.

Aruba Instant mode. 

In Aruba Instant mode, a single IAP-325 automatically distributes the network configuration to other Instant APs in the WLAN. Simply power-up on Instant AP, configure it over the air, and plug in the other APs – the entire process takes about five minutes.




Accelerate your business with the mobile-first digital workplace.

The nature of work is changing. Collaborative environments, a mobile workforce, and the possibility of smarter spaces. Harness new technology – ultra-fast Wi-Fi, the Internet of Things, and mobile UC — to move your business, and the people in it, faster than ever before.







Workplace design and technology must move in unison.


 As you move to the digital workplace, it’s critical to get your IT infrastructure ready. To meet the challenges, Aruba offers an integrated wired and wireless portfolio, with industry-leading advances in network management and security.








Create smarter, more efficient spaces with IoT.

 BYOD changed the playing field and allowed the workplace to go mobile. Now IoT is taking things up a notch by creating smarter, more efficient work spaces — intelligent meeting rooms, location services, and real time monitoring. Aruba was there to solve your BYOD challenges and we’re ready for IoT. Are you?






Aruba's mobile-first approach to wired and wireless.

 As organisations transition to the digital workplace, the majority of users will connect via wireless, but the surge in mobile and IoT means that the wired infrastructure is critical, too. Although fewer ports will be needed, high performing switches will team up with Wi-Fi to give businesses always-on connectivity. 






Automate security for BYOD and IoT.

Aruba ClearPass can now profile any IoT device, integrate with multi-factor authentication for stronger device and app security, and provide deeper insights into security incidents. Its automated threat protection features ensure that each device is accurately given network access privileges with minimal hands-on IT interaction.

Extreme performance 802.11ac Wave 2 APs with dual-5 GHz and multi-gig Ethernet support

The Aruba 340 series access points provide the fastest 802.11ac gigabit data speeds and superb user experience for mobile devices and applications in a digital workplace. Designed with an integrated, 802.3bz Compliant, HPE SmartRate multi-gig Ethernet port to eliminate wired bottlenecks, these APs offer unmatched wireless performance and capacity. The unique and flexible dual-5 GHz architecture of the 340 series offers a way to double 5 GHz capacity where needed, without compromise or restrictions.

Thanks to Aruba’s advanced ClientMatch technology, the 340 series can automatically detect and classify 802.11ac Wave 2 capable mobile devices. This allows ClientMatch to automatically group Wave 2 capable devices onto a single Wave 2 radio so that performance benefits of multi-user MIMO can be realised - without the adverse effects of slower 802.11ac and traditional 802.11n capable mobile devices. This means increased network capacity and a boost in network efficiency.

With maximum data rates of 2,166 Mbps in the 5 GHz band and 800 Mbps in the 2.4 GHz band (for an aggregate peak data rate of 3.0 Gbps in dual-band mode and 4.3 Gbps in dual-5 GHz mode), the 340 series APs deliver a best-in-class, next-generation 802.11ac Wi-Fi infrastructure that is ideal for lecture halls, auditoriums, public venues, and high-density office environments.

These high performance and high density 340 Series 802.11ac access points support up to 160 MHz channel bandwidth (VHT160), and 4 spatial streams (4SS) for both SU- and MU-MIMO communications.

Features: Dual-5GHz radios.
Multi-gigabit SmartRate Ethernet uplink (802.3bz)..
4x4:4SS SU-MIMO and MU-MIMO operation, channel bandwidth up to 160 MHz.
Unified AP (supporting ArubaOS and InstantOS modes).
Integrated Bluetooth Low Energy (BLE) beacon.
Hitless POE failover between uplink Ethernet ports.
Unique Benefits

High Performance 802.11ac Access Point with Dual-5 GHz Support
-The Aruba 340 Series Access Points delivers the highest-performing 802.11ac Wave 2 Access Point in the Aruba portfolio and adds the radio isolation and software configurability to support simultaneous operation of dual-5 GHz radios for extreme density or extreme performance needs.
-Software configurable to operate in either dual-5GHz mode or dual-band mode (one 5GHz radio, one 2.4 GHz radio).


Built-in Bluetooth Low-Energy (BLE) radio
-Enables location-based services with BLE-enabled mobile devices receiving signals from multiple Aruba Beacons at the same time.
-Enables management of your deployment of battery powered Aruba Beacons


802.3bz Multi-gigabit Ethernet Uplink With Hitless POE Failover
-The Aruba 340 Series Access Points increase throughput with one 802.3bz compliant 2.5GBASE-T SmartRate Ethernet uplink and a secondary 1GBASE-T uplink with hitless POE failover between the two uplinks. The uplinks can also be configured for link aggregation to improve performance.
-The hitless POE failover between the two uplink ports is ideal for environments where wireless is critical to the business (e.g. healthcare, retail).


Includes Support for 802.11ac Wave 2 with 4x4:4SS, 160MHz, and MU-MIMO
-The Aruba 340 Series Access Points support 802.11ac with Wave 2 features including 4x4:4SS and up to 160 MHz channel bandwidth.
-The radios support transmissions in Multi-User MIMO (MU-MIMO) and Single-User MIMO (SU-MIMO) operating modes.


Threat Protection and Security  
- The Aruba 340 Series Access Points feature integrated wireless intrusion protection offers threat protection and mitigation, and eliminates the need for separate RF sensors and security appliances.



Aruba Instant mode. 

In Aruba Instant mode, a single IAP-345 automatically distributes the network configuration to other Instant APs in the WLAN. Simply power-up on Instant AP, configure it over the air, and plug in the other APs – the entire process takes about five minutes.




Accelerate your business with the mobile-first digital workplace.

The nature of work is changing. Collaborative environments, a mobile workforce, and the possibility of smarter spaces. Harness new technology – ultra-fast Wi-Fi, the Internet of Things, and mobile UC — to move your business, and the people in it, faster than ever before.







Workplace design and technology must move in unison.


 As you move to the digital workplace, it’s critical to get your IT infrastructure ready. To meet the challenges, Aruba offers an integrated wired and wireless portfolio, with industry-leading advances in network management and security.








Create smarter, more efficient spaces with IoT.

 BYOD changed the playing field and allowed the workplace to go mobile. Now IoT is taking things up a notch by creating smarter, more efficient work spaces — intelligent meeting rooms, location services, and real time monitoring. Aruba was there to solve your BYOD challenges and we’re ready for IoT. Are you?






Aruba's mobile-first approach to wired and wireless.

 As organisations transition to the digital workplace, the majority of users will connect via wireless, but the surge in mobile and IoT means that the wired infrastructure is critical, too. Although fewer ports will be needed, high performing switches will team up with Wi-Fi to give businesses always-on connectivity. 






Automate security for BYOD and IoT.

Aruba ClearPass can now profile any IoT device, integrate with multi-factor authentication for stronger device and app security, and provide deeper insights into security incidents. Its automated threat protection features ensure that each device is accurately given network access privileges with minimal hands-on IT interaction.

The HPE Aruba JZ336A High performance WiFi 6 (802.11ax) wireless access point for high density mobile and IoT deployments

Specifications

2.97 Gbps Maximum Speed
WPA3 and Enhanced Open security
Built-in technology that resolves sticky client issues for Wi-Fi 6 and Wi-Fi 5 Devices
OFDMA For enhanced multi-user efficiency
IoT-ready Bluetooth 5 and Zigbee support
Embedded ranging technology for accurate indoor location measurements
*For complete specifications look under the documentation tab above

Overview

Aruba 530 Series Overview:

The Aruba 530 Series, equipped with 802.11ax (Wi-Fi 6) and complemented by intelligent Aruba software features, is meticulously crafted to offer robust connectivity in high-density scenarios, catering to the demands of mobile and IoT device deployments.

Enhanced Network Performance:

Designed to handle extreme density, the 530 Series excels in simultaneously serving multiple clients and various types of traffic. This results in a remarkable enhancement of overall network performance, outpacing 802.11ac APs by up to 4X.

Differentiated Capabilities:

Beyond the advantages of 802.11ax, the 530 Series showcases distinctive Aruba capabilities. These include AI-powered RF optimization, ensuring an intelligent radio frequency environment, always-on connectivity for uninterrupted services, and WPA3 certified security for robust protection.

Energy-Efficient Green AP Mode:

Noteworthy is the Energy-Efficient Green AP Mode, a feature specific to 802.11ax APs. Leveraging cutting-edge AI and machine learning capabilities, it delivers substantial energy savings of up to 70%, contributing to a greener and more sustainable network infrastructure.

Enhanced Performance:

Aruba's ClientMatch feature intelligently groups Wi-Fi 6 clients onto the best APs to leverage 802.11ax multi-user capabilities.

Smart Power Management:

Aruba Intelligent Power Monitoring (IPM) allows APs to operate even if existing Ethernet switches lack adequate PoE power.

IoT and Location Ready:

Leverage your Wi-Fi infrastructure to support Zigbee and Bluetooth use cases, devices, and applications.

802.11ac Wave 2 that scales up to multi-gig Ethernet

The Aruba 330 Series access points provide the fastest gigabit data speeds and superb user experience for mobile devices and applications in a digital workplace. Designed with an integrated HPE Smart Rate port to scale up to 5Gbps Ethernet, the 330 Series allows enterprises to leverage their multi-gigabit Ethernet wired network infrastructures to eliminate bottlenecks.

Thanks to ClientMatch technology, ArubaOS enables the 330 series to automatically detect and classify 802.11ac Wave 2 capable mobile devices. This allows ClientMatch to automatically collect Wave 2 capable devices under a single Wave 2 radio so that performance benefits of multi-user MIMO can be realised - without the adverse effects of slower 802.11ac and traditional 802.11n capable mobile devices. This means increased network capacity and a boost in network efficiency.

With a maximum concurrent data rate of 1,733 Mbps in the 5 GHz band and 600 Mbps in the 2.4 GHz band (for an aggregate peak data rate of 2.3Gbps), the 330 Series Access Points deliver a best-in-class, next-generation 802.11ac Wi-Fi infrastructure that is ideal for lecture halls, auditoriums, public venues, and high-density office environments.

The high performance and high density 802.11ac 330 Series Access Points support 160 MHz channel bandwidth (VHT160), 4-stream multi-user MIMO (MU-MIMO) and 4 spatial streams (4SS).

Features: Dual Radio 802.11ac Access Point with Multi-User MIMO
5 GHz (1,733 Mbps max rate) and 2.4 GHz (600 Mbps max rate) radios, each with 4x4 MIMO support and a total of eight integrated omni-directional downtilt antennas.
Antenna polarisation diversity for optimised RF performance.
Aruba 330 Series Access Points are multi-gigabit 802.11ac Wave 2 APs with HPE Smart Rate deliver best-in-class, next-generation 802.11ac Wi-Fi infrastructure that is ideal for lecture halls, auditoriums, public venues, and high-density office environments.
Mounts on ceiling or wall
Unique Benefits

Dual radio 4x4 802.11ac access point with multi-user MIMO
-Supports up to 1,733 Mbps in the 5 GHz band (with 4SS/VHT80 clients) and 600 Mbps in the 2.4 GHz band (with 4SS/HT40 clients)


Built-in Bluetooth Low-Energy (BLE) radio
-Enables location-based services with BLE-enabled mobile devices receiving signals from multiple Aruba Beacons at the same time.
-Enables management of your deployment of battery powered Aruba Beacons
Quality of service for Unified Communication apps
- Supports priority handling and policy enforcement for unified communication apps, including Microsoft Skype for Business with encrypted videoconferencing, voice, chat and desktop sharing.
RF Management
- Adaptive Radio Management (ARM) technology automatically assigns channel and power settings, provides airtime fairness, and ensures that APs stay clear of all sources of RF interference to deliver reliable, high-performance WLANs.
Threat Protection and Security  
- The Aruba 330 Series Access Points feature integrated wireless intrusion protection offers threat protection and mitigation, and eliminates the need for separate RF sensors and security appliances.

Aruba Instant mode. 

In Aruba Instant mode, a single IAP-335 automatically distributes the network configuration to other Instant APs in the WLAN. Simply power-up on Instant AP, configure it over the air, and plug in the other APs – the entire process takes about five minutes.




Accelerate your business with the mobile-first digital workplace.

The nature of work is changing. Collaborative environments, a mobile workforce, and the possibility of smarter spaces. Harness new technology – ultra-fast Wi-Fi, the Internet of Things, and mobile UC — to move your business, and the people in it, faster than ever before.







Workplace design and technology must move in unison.


 As you move to the digital workplace, it’s critical to get your IT infrastructure ready. To meet the challenges, Aruba offers an integrated wired and wireless portfolio, with industry-leading advances in network management and security.








Create smarter, more efficient spaces with IoT.

 BYOD changed the playing field and allowed the workplace to go mobile. Now IoT is taking things up a notch by creating smarter, more efficient work spaces — intelligent meeting rooms, location services, and real time monitoring. Aruba was there to solve your BYOD challenges and we’re ready for IoT. Are you?






Aruba's mobile-first approach to wired and wireless.

 As organisations transition to the digital workplace, the majority of users will connect via wireless, but the surge in mobile and IoT means that the wired infrastructure is critical, too. Although fewer ports will be needed, high performing switches will team up with Wi-Fi to give businesses always-on connectivity. 






Automate security for BYOD and IoT.

Aruba ClearPass can now profile any IoT device, integrate with multi-factor authentication for stronger device and app security, and provide deeper insights into security incidents. Its automated threat protection features ensure that each device is accurately given network access privileges with minimal hands-on IT interaction.

High-performance 802.11ac Wave 2

The Aruba 310 Series access points deliver high performance and superb user experience for mobile devices, Internet of Things (IoT) devices, and applications in dense office environments. Featuring the 4x4:4SS MU-MIMO capability, advanced Aruba ClientMatch radio management, and Aruba Beacon technologies, the 310 Series enables an all-wireless digital work environment in a cost-effective manner.

With a maximum concurrent data rate of 1,733 Mbps in the 5 GHz band and 300 Mbps in the 2.4 GHz band (for an aggregate peak data rate of 2.0 Gbps), the 310 Series Access Points can quickly add required capacities to your existing or new wireless networks. The mid-range 310 Series, with its single gigabit Ethernet uplink, is ideal for high device density environments, such as schools, retail branches, hotels and enterprise offices, where the organisation is cost sensitive.

The high performance and high density 802.11ac 310 Series supports 160 MHz channel bandwidth (VHT160), multi-user MIMO (MU-MIMO) and 4 spatial streams (4SS). It provides simultaneous data transmission to multiple devices, maximising data throughput and improving network efficiency.

Features: Dual Radio 802.11ac Access Point with Multi-User MIMO
Aruba 310 Series Access Points delivers aggregate 2.1Gbps data rate with 1.7Gbps @ 5GHz and 400Mbps @ 2.4GHz
The Aruba 310 Series Access Points provide fast gigabit data speeds and a superb user experience for mobile devices, Internet of Things (IoT) devices, and applications in high density office environments..
4x4:4SS SU/MU-MIMO @ 5GHz; and 2x2:2SS SU-MIMO @ 2.4GHz to ensure the highest performance.
Mounts on ceiling or wall
Unique Benefits

Dual Radio 802.11ac Access Point with Multi-User MIMO
-Supports up to 1,300 Mbps in the 5GHz band (with 3SS/ VHT80 clients) and up to 300 Mbps in the 2.4GHz band (with 2SS/HT40 clients)


Built-in Bluetooth Low-Energy (BLE) radio
-Enables location-based services with BLE-enabled mobile devices receiving signals from multiple Aruba Beacons at the same time.
-Enables management of your deployment of battery powered Aruba Beacons
Quality of service for Unified Communication apps
- Supports priority handling and policy enforcement for unified communication apps, including Microsoft Skype for Business with encrypted videoconferencing, voice, chat and desktop sharing.
RF Management
- Adaptive Radio Management (ARM) technology automatically assigns channel and power settings, provides airtime fairness, and ensures that APs stay clear of all sources of RF interference to deliver reliable, high-performance WLANs.
Threat Protection and Security  
- The Aruba 310 Series Access Points feature integrated wireless intrusion protection offers threat protection and mitigation, and eliminates the need for separate RF sensors and security appliances.

Aruba Instant mode. 

In Aruba Instant mode, a single IAP-315 automatically distributes the network configuration to other Instant APs in the WLAN. Simply power-up on Instant AP, configure it over the air, and plug in the other APs – the entire process takes about five minutes.




Accelerate your business with the mobile-first digital workplace.

The nature of work is changing. Collaborative environments, a mobile workforce, and the possibility of smarter spaces. Harness new technology – ultra-fast Wi-Fi, the Internet of Things, and mobile UC — to move your business, and the people in it, faster than ever before.







Workplace design and technology must move in unison.


 As you move to the digital workplace, it’s critical to get your IT infrastructure ready. To meet the challenges, Aruba offers an integrated wired and wireless portfolio, with industry-leading advances in network management and security.








Create smarter, more efficient spaces with IoT.

 BYOD changed the playing field and allowed the workplace to go mobile. Now IoT is taking things up a notch by creating smarter, more efficient work spaces — intelligent meeting rooms, location services, and real time monitoring. Aruba was there to solve your BYOD challenges and we’re ready for IoT. Are you?






Aruba's mobile-first approach to wired and wireless.

 As organisations transition to the digital workplace, the majority of users will connect via wireless, but the surge in mobile and IoT means that the wired infrastructure is critical, too. Although fewer ports will be needed, high performing switches will team up with Wi-Fi to give businesses always-on connectivity. 






Automate security for BYOD and IoT.

Aruba ClearPass can now profile any IoT device, integrate with multi-factor authentication for stronger device and app security, and provide deeper insights into security incidents. Its automated threat protection features ensure that each device is accurately given network access privileges with minimal hands-on IT interaction.



Access Point Comparison Chart 

Instant AP Instant 207Instant 303Instant 305Instant 315Instant 325 Ships with AOS image Ships with Instant image Number of radios 2 Supported bands Dual concurrent Wi-Fi standards 802.11 a/b/g/n/ac Radio MIMO type 2x2:2 2x2:2 3x3:3 (5GHz)
2x2:2 (2.4GHz) 4x4:4 (5GHz)
2x2:2 (2.4GHz) 4x4:4 (5GHz)
4x4:4 (2.4GHz) MU-MIMO support (5GHz)  N/A 2x2:2 3x3:2 4x4:4 4x4:3 Max n.o of BSSIDs (per radio) 16 Max n.o of associated clients per radio 256 Max transmit power (per radio chain, MCS0) 2.4 GHz/5 GHz 18 dBm (conducted) per chain
18 dBm (conducted) per chain 18 dBm
18 dBm Integrated antennas 2x omni-directional downtilt dual band 2x omni-directional downtilt dual band 3x omni-directional downtilt dual band 4x omni-directional downtilt dual band 8x omni-directional downtilt single band TPM module Network interfaces 1 x GE 2 x GE Jumbo frame support on uplink USB host interface     Console port Proprietary; optional adapter cable available  RJ-45 PoE PD Power 802.3af/at PoE PSE           DC power support 12V Ships with AC-to-DC adapter           Temperature range 0° C to +40° C 0° C to +50° C Enclosure type Plastic/metal Weight (unit only, with desk mount) 380g 350g 460g 650g 950g Plenum rated TAA/FIPS Version available   Lifetime Warranty Minimum software version ArubaOS 6.5.1.0
Aruba InstantOS 4.3.1.0 ArubaOS and Aruba InstantOS 8.3.0.0 ArubaOS™ 6.5.1.0
Aruba InstantOS™ 4.3.1.0 ArubaOS™ 6.5.0.0
Aruba InstantOS™ 4.3.0.0  ArubaOS 6.4.4.0
InstantOS 4.2.1.0 Spectrum analysis support   Maximum power consumption (excluding USB, PoE PSE) 12.3W (PoE)
10.1W(DC) 10.6W (PoE) 
9.1W (DC) 13W (PoE)
11W(DC) 14.4W (PoE+) 
13.6W (PoE)
12.7w(DC) 20W (PoE)
18.5W (DC) Max IPsec encrypted wired throughput (RAP mode) 20 100 20 100 100